Study guide
1.3 NFPA 470, OSHA HAZWOPER, and APIE-T
Hazardous Materials Technician Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Technician Role and Response Levels 1.3 NFPA 470, OSHA HAZWOPER, and APIE-T
2 Hazard Identification Systems
2.1 DOT Hazard Classes 1–9 2.2 Placards, Labels, and GHS Pictograms 2.3 UN/NA Numbers and NFPA 704 2.4 SDS and Shipping Papers
3 Reference Sources and Chemical Properties
3.1 Emergency Response Guidebook (ERG 2024) 3.2 Collecting and Interpreting Hazard Information 3.3 Chemical and Physical Properties for Responders
4 Containers, Damage, and Behavior
4.1 Container Recognition 4.2 Container Damage Assessment 4.3 Predicting Material and Container Behavior 4.4 Estimating the Endangered Area
5 PPE Ensembles and Chemical Protective Clothing
5.1 EPA/OSHA PPE Levels A–D 5.2 Chemical Protective Clothing Types and NFPA Standards 5.3 Permeation, Penetration, Degradation, and Compatibility 5.4 Respiratory Protection: SCBA and Air-Purifying Respirators
6 PPE Selection and Operations
6.1 Selecting Technician-Level PPE 6.2 Donning, Doffing, and Working in PPE 6.3 Heat Stress, Work/Rest, and the Buddy System 6.4 PPE Programs and Medical Surveillance
7 Decontamination Fundamentals
7.1 Contamination vs Exposure 7.2 Emergency Decontamination 7.3 Technical Decontamination and Corridor Setup 7.4 Decontamination Methods and Solutions
8 Mass Decontamination and Effectiveness
8.1 Mass Decontamination 8.2 Equipment Decon and Runoff Control 8.3 Evaluating Decontamination Effectiveness
9 Product Control Fundamentals
9.1 Containment vs Confinement 9.2 Confinement Techniques 9.3 Plugging and Patching 9.4 Overpacking Nonbulk and Radioactive Packages
10 Offensive Control and Rescue
10.1 Pressurized Containers and Chlorine Kits A/B/C 10.2 MC 306/DOT 406 Dome Clamp, Grounding, and Bonding 10.3 Liquid Product Transfer 10.4 Victim Rescue and Recovery in the Hot Zone
11 Air Monitoring Fundamentals
11.1 Monitoring Strategy, Bump Tests, and Calibration 11.2 Four-Gas Meters and Combustible Gas Indicators 11.3 Photoionization and Flame Ionization Detectors
12 Specialized Detection
12.1 Colorimetric Detector Tubes 12.2 Radiation Types and Detection Instruments 12.3 Interpreting Monitoring Data and Instrument Limits
13 Toxicology Fundamentals
13.1 Routes of Exposure 13.2 Dose-Response, Acute vs Chronic Effects 13.3 Exposure Limits: PEL, TLV, STEL, Ceiling, IDLH, REL
14 Health Effects and CBRN Hazards
14.1 Chemical Health Effects and Target Organs 14.2 Biological Hazards and CBRN/WMD Agents
15 Incident Command and Site Control
15.1 ICS Structure for Hazmat Incidents 15.2 Control Zones and the Site Safety Plan 15.3 Incident Action Plan and Response Objectives
16 Evaluation and Termination
16.1 Evaluating and Reporting Progress 16.2 Termination, Documentation, and Evidence Preservation
1.3 NFPA 470, OSHA HAZWOPER, and APIE-T
Key Takeaways Explain This Topic AI
NFPA 470 (2022) is the current consolidated responder standard; it absorbed NFPA 472, NFPA 473, and NFPA 1072, so Chapter 11 — not standalone NFPA 1072 Chapter 7 — is the current technician JPR chapter.
OSHA 29 CFR 1910.120(q) governs emergency-response technicians; 1910.120(e) is hazardous-waste site-worker training (including the well-known 40-hour general site worker) and is not the fire-service technician course.
APIE-T (Analyze, Plan, Implement, Evaluate, Terminate) maps to NFPA 470 Chapter 11 JPRs 11.2–11.6.
OSHA 1910.120(q)(6)(iii) lists technician competencies (A) through (I), from implementing the employer’s emergency response plan through basic chemical and toxicological terminology.
ERG 2024 is the current PHMSA Emergency Response Guidebook used with DOT/PHMSA transportation rules; SARA Title III/EPCRA drives local emergency planning, not the Pro Board written length.
Last updated: August 2026
Technician test items mix three languages : a consensus standard, a federal emergency-response rule, and a risk-based process. If you can name all three — National Fire Protection Association (NFPA) 470 (2022) , OSHA 29 CFR 1910.120(q) , and APIE-T — you can place almost any introductory question. If you only remember “HAZWOPER 40,” you will miss items that look easy.
NFPA 470 (2022): one book instead of three
NFPA 470 , Hazardous Materials/Weapons of Mass Destruction (WMD) Standard for Responders , 2022 edition , is the current professional-qualification and competency document for this exam. It consolidated three earlier standards:
- NFPA 472 — competencies for responders
- NFPA 473 — competencies for emergency medical service personnel
- NFPA 1072 — professional qualifications (the JPR book many academies still quote from habit)
Technician JPRs are Chapter 11 . Awareness is Chapter 5 . Operations is Chapter 7 . The Pro Board list updated 08-20-2024 tests Technician on Chapter 11 with Chapters 5 and 7 as prerequisites. Trap: citing NFPA 1072 Chapter 7 as if it were still the standalone current professional-qualification document. Chapter 7 of 1072 was the technician JPR chapter in that older book. In 470/2022, Chapter 7 is Operations and Chapter 11 is Technician . TEEX HAZ020’s catalog still cites NFPA 1072 Chapter 7 beside 29 CFR 1910.120(q)(6)(iii); that is a legacy label on a current course, not proof that 1072 remains the live standalone standard. When an item asks for the current technician chapter, answer NFPA 470 (2022) Chapter 11 .
OSHA HAZWOPER: (q) is not (e)
Hazardous Waste Operations and Emergency Response (HAZWOPER) is OSHA 29 CFR 1910.120 . The section has more than one job inside it, and mixing them is a high-yield error.
Paragraph (e) trains hazardous-waste site workers — cleanup at uncontrolled hazardous waste sites. The well-known 40-hour “HAZWOPER” course plus three days of field experience is (e)(3)(i) for general site workers . That course does not make you a fire-service hazardous materials technician and does not replace NFPA 470 Chapter 11 skills.
Paragraph (q) trains emergency response to releases without regard to location . Fire-department hazmat teams live here. Technician requirements are (q)(6)(iii) : at least 24 hours equal to first responder operations level AND competency in (A) through (I). The employer shall so certify.
Write this on a flashcard: 40-hour HAZWOPER cleanup ≠ emergency-response technician. A refinery firefighter can hold both; they are different legal boxes. Exam stems that mention Superfund cleanup, the National Priorities List, or “general site worker” are pointing at (e) . Stems that mention a leaking cargo tank on the interstate, a chlorine valve at a treatment plant, or “stop the release” are pointing at (q) .
OSHA technician competencies under (q)(6)(iii) are:
- Letter Competency
- (A) Implement the employer’s emergency response plan (ERP)
- (B) Classify, identify, and verify known and unknown materials using field survey instruments
- (C) Function within an assigned Incident Command System (ICS) role
- (D) Select and use specialized chemical personal protective equipment (PPE)
- (E) Hazard and risk-assessment techniques
- (F) Advanced control, containment, and/or confinement within available resources and PPE
- (G) Decontamination procedures
- (H) Termination procedures
- (I) Basic chemical and toxicological terminology and behavior
Those nine letters are why later chapters exist. They are also why 24 hours is not a typical academy length: fire-service courses of 40–80 hours (CDP PER-272, TEEX HAZ020, IAFF) are how departments actually build (A)–(I) plus NFPA 470 Chapter 11 JPRs.
EPA, DOT/PHMSA, and SARA Title III/EPCRA — the surrounding law
You do not need a law-school map, but you do need to know who owns which problem.
The U.S. Environmental Protection Agency (EPA) is the environmental-cleanup and Superfund/RCRA neighbor of HAZWOPER site work. EPA interest rises when product hits soil, water, or a listed waste site. It does not write NFPA 470 JPRs.
The U.S. Department of Transportation (DOT) Pipeline and Hazardous Materials Safety Administration (PHMSA) owns transportation of hazardous materials: placards, labels, shipping papers, and the Emergency Response Guidebook . The current guidebook is the ERG 2024 . First-due isolation distances in the orange guides are operations tools; technicians still use the ERG, then go further with instruments, SDS, and container analysis.
Superfund Amendments and Reauthorization Act (SARA) Title III , also called the Emergency Planning and Community Right-to-Know Act (EPCRA) , drives Local Emergency Planning Committees , facility reporting, and community right-to-know. Your employer’s ERP should connect to that local plan. EPCRA does not set the 100-question written length or the 70% passing score.
On a test item, pick the smallest correct owner : PHMSA/ERG for a placarded truck on the highway; EPA for a Superfund cleanup worker’s 40-hour (e) course; OSHA (q) for the fire-department technician stopping a release; NFPA 470 Chapter 11 for Pro Board/IFSAC professional qualification.
APIE-T: the process that maps onto Chapter 11
The International Association of Fire Fighters (IAFF) and NFPA-based programs teach a risk-based process: Analyze, Plan, Implement, Evaluate, Terminate (APIE-T) . It is not a fourth law. It is the order of work that NFPA 470 Chapter 11 already uses:
APIE-T step NFPA 470 (2022) JPR block Technician meaning
Analyze 11.2 Collect and interpret hazard information, survey with instruments, assess container damage, predict behavior, estimate the endangered area
Plan 11.3 Set response objectives, select PPE, select decontamination, build the incident action plan
Implement 11.4 Perform the assigned ICS function, don/doff and work in PPE, control product, rescue as assigned, run mass and technical decontamination
Evaluate 11.5 Determine whether control and decontamination are working; report progress; change the plan if they are not
Terminate 11.6 Document, debrief, transfer remaining hazards, and close the emergency phase
Some older pocket cards stop at APIE (four letters) and fold termination into evaluate. This exam path includes Terminate as its own JPR block ( 11.6 ) and OSHA lists termination as competency (H) . Do not skip the last letter. Evaluate asks “is the leak actually stopped?” Terminate asks “have we documented, debriefed, and handed the scene off?” They are sequential, not synonyms.
A chlorine ton-container incident run through APIE-T looks like this. Analyze: identify chlorine, read the container and valve, estimate downwind impact. Plan: offensive objective to kit the valve, Level A or other selected ensemble, technical decontamination corridor, backup team. Implement: make the entry, control the leak, decontaminate. Evaluate: monitoring and visual check confirm the release has stopped; if not, withdraw and re-plan. Terminate: logs, exposure records, after-action notes, and return of the facility to the responsible party. That five-step spine is how Chapter 11 items are written even when the question never prints the acronym.
Keep the consolidation trap and the (q) versus (e) trap in the same mental folder. The current book is NFPA 470 (2022) . The current technician chapter is 11 . The emergency-response law is 1910.120(q) . The 40-hour site-worker course is 1910.120(e) . The process is APIE-T , mapped to 11.2–11.6 . Everything else in this guide hangs on those four sentences.