Study guide
3.2 Collecting and Interpreting Hazard Information
Hazardous Materials Technician Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Technician Role and Response Levels 1.3 NFPA 470, OSHA HAZWOPER, and APIE-T
2 Hazard Identification Systems
2.1 DOT Hazard Classes 1–9 2.2 Placards, Labels, and GHS Pictograms 2.3 UN/NA Numbers and NFPA 704 2.4 SDS and Shipping Papers
3 Reference Sources and Chemical Properties
3.1 Emergency Response Guidebook (ERG 2024) 3.2 Collecting and Interpreting Hazard Information 3.3 Chemical and Physical Properties for Responders
4 Containers, Damage, and Behavior
4.1 Container Recognition 4.2 Container Damage Assessment 4.3 Predicting Material and Container Behavior 4.4 Estimating the Endangered Area
5 PPE Ensembles and Chemical Protective Clothing
5.1 EPA/OSHA PPE Levels A–D 5.2 Chemical Protective Clothing Types and NFPA Standards 5.3 Permeation, Penetration, Degradation, and Compatibility 5.4 Respiratory Protection: SCBA and Air-Purifying Respirators
6 PPE Selection and Operations
6.1 Selecting Technician-Level PPE 6.2 Donning, Doffing, and Working in PPE 6.3 Heat Stress, Work/Rest, and the Buddy System 6.4 PPE Programs and Medical Surveillance
7 Decontamination Fundamentals
7.1 Contamination vs Exposure 7.2 Emergency Decontamination 7.3 Technical Decontamination and Corridor Setup 7.4 Decontamination Methods and Solutions
8 Mass Decontamination and Effectiveness
8.1 Mass Decontamination 8.2 Equipment Decon and Runoff Control 8.3 Evaluating Decontamination Effectiveness
9 Product Control Fundamentals
9.1 Containment vs Confinement 9.2 Confinement Techniques 9.3 Plugging and Patching 9.4 Overpacking Nonbulk and Radioactive Packages
10 Offensive Control and Rescue
10.1 Pressurized Containers and Chlorine Kits A/B/C 10.2 MC 306/DOT 406 Dome Clamp, Grounding, and Bonding 10.3 Liquid Product Transfer 10.4 Victim Rescue and Recovery in the Hot Zone
11 Air Monitoring Fundamentals
11.1 Monitoring Strategy, Bump Tests, and Calibration 11.2 Four-Gas Meters and Combustible Gas Indicators 11.3 Photoionization and Flame Ionization Detectors
12 Specialized Detection
12.1 Colorimetric Detector Tubes 12.2 Radiation Types and Detection Instruments 12.3 Interpreting Monitoring Data and Instrument Limits
13 Toxicology Fundamentals
13.1 Routes of Exposure 13.2 Dose-Response, Acute vs Chronic Effects 13.3 Exposure Limits: PEL, TLV, STEL, Ceiling, IDLH, REL
14 Health Effects and CBRN Hazards
14.1 Chemical Health Effects and Target Organs 14.2 Biological Hazards and CBRN/WMD Agents
15 Incident Command and Site Control
15.1 ICS Structure for Hazmat Incidents 15.2 Control Zones and the Site Safety Plan 15.3 Incident Action Plan and Response Objectives
16 Evaluation and Termination
16.1 Evaluating and Reporting Progress 16.2 Termination, Documentation, and Evidence Preservation
3.2 Collecting and Interpreting Hazard Information
Key Takeaways Explain This Topic AI
NFPA 470 11.2.1 and 11.2.2 require technicians to collect and interpret hazard and response information; OSHA 1910.120(q)(6)(iii)(B) requires classification, identification, and verification of known and unknown materials using field survey instruments and equipment.
Build identity from more than one source: ERG, SDS, shipping papers, NIOSH Pocket Guide, CAMEO Chemicals, CHEMTREC/CANUTEC, facility pre-plans, pipeline markers, NFPA 704, container specification plates, interviews, and monitoring data.
The CDC/NIOSH Pocket Guide is the industrial-hygiene reference for IDLH values, OSHA PELs, NIOSH recommended exposure limits, physical description, incompatibilities, and PPE/respirator recommendations—information the ERG does not give.
CHEMTREC and the shipper 24-hour number on shipping papers provide 24-hour technical assistance; they do not replace on-scene verification.
Stopping at an ERG orange page as if it were a completed identity is an exam and field failure. A highway crash with a visible UN number and an unlabeled drum farm start at different clues but both require identify-then-verify.
Last updated: August 2026
3.2 Collecting and Interpreting Hazard Information
Quick Answer: NFPA 470 11.2.1 / 11.2.2 and OSHA 1910.120(q)(6)(iii)(B) require you to classify, identify, and verify known and unknown materials. Collect information from the ERG , SDS , shipping papers , the NIOSH Pocket Guide , CAMEO Chemicals , CHEMTREC or CANUTEC , pre-plans, pipeline markers, NFPA 704 , specification plates, interviews, and instruments. Identify first, then verify with more than one source . Do not treat an orange ERG page as finished identity.
Awareness-level responders recognize that a hazard is present. Operations-level responders use defensive information. Hazardous materials technicians are the people OSHA expects to approach the point of release after they have actually identified the product. That is why (q)(6)(iii)(B) is written as classification, identification, and verification of known and unknown materials by using field survey instruments and equipment . (q)(6)(iii)(I) —basic chemical and toxicological terminology and behavior—is the language you use to interpret those sources. If your only move is "open the ERG and start the kit," you have not met the JPR.
The source stack: what each one is for
Source What it reliably gives you What it will not do
ERG 2024 Initial isolation, orange-guide family hazards, green-page TIH distances for transportation Unique identity, IDLH, PPE permeation, offensive tactics
Shipping papers / bill of lading / consist Proper shipping name, UN/NA number, hazard class, packing group, quantity, 24-hour emergency telephone number (49 CFR 172.604) Proof the tank still contains what was loaded
SDS Manufacturer identity, composition, first aid, firefighting, spill measures, handling, exposure controls, physical/chemical properties, stability/reactivity, toxicology Instant on-scene isolation distances; may lag the load if the paperwork is for a different batch
NIOSH Pocket Guide (CDC/NIOSH) IDLH , OSHA permissible exposure limits (PELs) , NIOSH recommended exposure limits (RELs) , physical description, incompatibilities, PPE and respirator recommendations Transportation isolation tables; not every commercial mixture
CAMEO Chemicals (NOAA/EPA) Datasheets, reactivity, fire/health/spill recommendations; works offline in the app A substitute for your department's PPE chemical charts
CHEMTREC / CANUTEC / shipper 24-hour number Live industry assistance, SDS retrieval, shipper notification, specialty teams (for example chlorine) On-scene instrument readings
Facility pre-plans and pipeline markers Inventories, valve locations, operator name, 24-hour number, product in that segment Current contents if operations changed since the plan
NFPA 704 diamond Fixed-facility health/flammability/instability and special hazards at a glance Transportation isolation; not a UN number
Container specification plates DOT/TC specification, test dates, capacity, pressures The chemical name
Interviews (driver, plant operator, witnesses) Load history, leak timeline, process unit Unverified truth—people guess under stress
Monitoring data (preview) Oxygen, flammable range, toxic readings, radiation Identity by themselves; they classify atmosphere
Wireless Information System for Emergency Responders (WISER) still appears in older lectures and some test language as a National Library of Medicine mobile chemical tool. NLM discontinued WISER (announced 2023). Train to CAMEO Chemicals , the NIOSH Pocket Guide app, and the ERG 2024 app as the current public tools, and do not lose points on a question that still lists WISER as a historical source name.
NIOSH Pocket Guide: the industrial-hygiene page the ERG is missing
The NIOSH Pocket Guide to Chemical Hazards is a Centers for Disease Control and Prevention / NIOSH publication. It is built for workplace chemicals, not for DOT isolation distances. For a technician it is how you turn a name into numbers you can brief :
IDLH — the concentration that poses an immediate threat to life, would cause irreversible or delayed adverse health effects, or would interfere with the ability to escape. OSHA uses that concept in HAZWOPER decision-making; NIOSH publishes chemical-specific values.
PEL — OSHA regulatory limit (often an 8-hour time-weighted average).
REL — NIOSH recommended limit (not automatically the same as the PEL).
Physical description, odor (never used as a detection strategy), vapor pressure , ionization potential , relative gas density , flash point, lower/upper explosive limits when they apply.
Incompatibilities and reactivities — the list that tells you not to put that product next to water, acids, or oxidizers during control or decon.
PPE and respirator recommendations — a starting point that you still match to your ensemble's permeation data.
If the ERG says "toxic, may be fatal if inhaled" and the Pocket Guide gives you an IDLH in parts per million, you now have something a safety officer can put in the incident action plan. That is interpretation, not decoration.
CHEMTREC, CANUTEC, and the 24-hour number on the papers
CHEMTREC is the U.S. chemical-industry 24-hour emergency center listed in the ERG. CANUTEC is the Canadian counterpart; Mexican SETIQ is listed the same way. Shipping papers must carry a 24-hour emergency response telephone number . That number may be the shipper's own center or a contracted service such as CHEMTREC. Use it to confirm the load, obtain the SDS, and activate shipper or industry response teams . It is not a substitute for walking the scene from a safe location, reading the specification plate, or putting a meter in the air. Calling CHEMTREC and then entering the hot zone without verification is still a (q)(6)(iii)(B) miss.
Identify, then verify—on purpose
The failure pattern is always the same: one clue feels strong, so the team stops collecting.
Collect every independent clue you can reach from the cold or warm zone: placard, ID number, name, papers, diamond, stencil, driver statement, pre-plan, odor as a report from others (not as your sniff test), visible state of matter, container shape.
Form a tentative identification ("this is probably chlorine, UN 1017, Guide 124").
Verify with a second source of a different type. Shipping papers plus the yellow ERG page are two documents in the same transportation system—useful, but weak if both are wrong together. Stronger pairings: papers plus SDS plus NIOSH plus a meter reading that matches the claimed product.
Use field survey instruments to classify the atmosphere and to support identification of unknowns . OSHA's wording is not optional: known and unknown , instruments and equipment . A four-gas meter, radiation pager, pH paper, and (later in this guide) photoionization detector are how you keep from betting your lungs on a stencil.
If sources conflict, believe the conflict. A tank placarded flammable liquid whose headspace is not in the combustible-gas range, or a "chlorine" leak with no electrochemical-sensor movement and no acid-gas effects, is not a reason to argue with the placard—it is a reason to stop offensive action and re-identify.
Brief the incident commander with what is known, what is verified, and what is still assumed. Assumptions belong on the board, not in the entry order.
Trap: stopping at the ERG orange page as "the identity." Orange Guide 128 is a family of flammable liquids. It is not proof you have gasoline versus toluene versus a polar solvent that needs alcohol-resistant foam. Guide 124 is not a laboratory confirmation of chlorine. The orange page tells you how to start protecting people . Identity is a separate JPR.
Two scenes, same duty
Scene A — highway crash with a visible UN number. A cargo tank displays 1017 . Yellow page, green highlight, orange Guide 124, papers in the cab matching chlorine, driver conscious and consistent. You still verify : check the specification plate and valves against a chlorine cargo tank, call the 24-hour number, and use monitoring (oxygen, corrosive-gas sensor or colorimetric tube, not a photoionization detector as your chlorine proof) before anyone commits to a kit. The UN number makes this faster . It does not make instruments optional.
Scene B — unknown drum farm. Weathered 55-gallon drums, mixed colors, missing or contradictory labels, no shipping papers, a faint solvent odor reported by the first engine, NFPA 704 diamonds on the building that do not match every drum. There is no honest ERG identity yet. Classification starts with container type, condition, and field survey instruments : radioactivity, oxygen, flammability, pH of any liquid, volatile organic readings, and a methodical SDS search of the facility inventory. Interviews with a plant employee are clues, not a name you write on the entry board as fact. Opening drums to "see what it looks like" or sniffing the bung is not technician identification; it is an exposure.
The exam will swap those two pictures. The scoring idea is identical: collect, identify, verify with more than one source, and use instruments for known and unknown materials. Highway clues are richer. The drum farm is poorer. Neither scene is finished when the orange book falls open.