Study guide
5.1 The Coordinate Plane, Plotting Points & Relations vs. Functions
HiSET Mathematics Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: HiSET Mathematics Overview & Test Strategy
1.1 Exam Structure, Scoring Standards & Test-Day Logistics 1.2 Using the HiSET Formula Sheet & Calculator Effectively 1.3 Word Problem Translation & Test-Taking Strategies
2 Chapter 2: Numbers and Operations — Number Sets & Real-World Arithmetic
2.1 Real Number Classification, Absolute Value & Order of Operations 2.2 Operations with Fractions, Decimals & Signed Numbers 2.3 Exponents, Radicals & Scientific Notation
3 Chapter 3: Numbers and Operations — Proportional Reasoning & Financial Math
3.1 Ratios, Rates, Unit Rates & Proportions 3.2 Percentages, Percent Change & Markup/Discount 3.3 Real-World Consumer & Financial Arithmetic
4 Chapter 4: Algebraic Concepts — Expressions, Linear Equations & Inequalities
4.1 Algebraic Expressions, Combining Like Terms & Distributive Property 4.2 Solving One-Step, Two-Step & Multi-Step Linear Equations 4.3 Solving and Graphing Linear Inequalities 4.4 Modeling Real-World Problems with Linear Equations & Inequalities
5 Chapter 5: Algebraic Concepts — Linear Functions, Coordinate Geometry & Graphing
5.1 The Coordinate Plane, Plotting Points & Relations vs. Functions 5.2 Slope, Rate of Change & Graphing Lines 5.3 Linear Equation Forms (Slope-Intercept, Point-Slope, Standard) 5.4 Parallel & Perpendicular Lines and Direct Variation
6 Chapter 6: Algebraic Concepts — Systems of Equations, Polynomials & Rational Expressions
6.1 Systems of Linear Equations (Graphing & Substitution) 6.2 Systems of Linear Equations (Elimination & Word Problems) 6.3 Polynomial Operations (Addition, Subtraction & Multiplication) 6.4 Factoring Polynomials & Special Products 6.5 Rational Expressions, Rational Equations & Radical Equations
7 Chapter 7: Algebraic Concepts — Quadratic Equations, Completing the Square & Function Families
7.1 Solving Quadratic Equations by Factoring & Square Root Property 7.2 The Quadratic Formula & The Discriminant 7.3 Quadratic Graphs, Parabolas & Basic Non-Linear Functions 7.4 Completing the Square, Vertex Form & Optimization 7.5 Graphing Function Families, Asymptotes & End Behavior
8 Chapter 8: Measurement and Geometry — 2D Geometry, Area & Transformations
8.1 Lines, Angles & Geometric Relationships 8.2 Triangles, Polygons & The Pythagorean Theorem 8.3 Perimeter, Circumference & Area of 2D Figures 8.4 Congruence, Similarity & Scale Drawings 8.5 Transformations in the Plane: Reflections, Translations, Rotations & Dilations
9 Chapter 9: Measurement and Geometry — 3D Figures & Measurement Systems
9.1 Surface Area of 3D Geometric Solids 9.2 Volume of 3D Geometric Solids 9.3 Units of Measurement & Dimensional Analysis
10 Chapter 10: Data Analysis, Probability, and Statistics — Data Displays & Statistical Measures
10.1 Measures of Central Tendency & Dispersion 10.2 Reading and Interpreting Tables, Bar Graphs, Line Graphs & Circle Graphs 10.3 Histograms, Box Plots & Scatter Plots
11 Chapter 11: Data Analysis, Probability, and Statistics — Probability & Counting Principles
11.1 Simple Probability & Odds 11.2 Compound Events, Independent & Dependent Probability 11.3 Real-World Data Analysis & Statistical Reasoning
5.1 The Coordinate Plane, Plotting Points & Relations vs. Functions
Key Takeaways Explain This Topic AI
The Cartesian coordinate plane is constructed from two perpendicular real number lines intersecting at the origin ( 0 , 0 ) (0, 0) ( 0 , 0 ) , dividing the plane into four Roman-numeral quadrants (I: ( + , + ) (+, +) ( + , + ) , II: ( − , + ) (-, +) ( − , + ) , III: ( − , − ) (-,-) ( − , − ) , IV: ( + , − ) (+, -) ( + , − ) ).
An ordered pair ( x , y ) (x, y) ( x , y ) defines a unique location where the x x x -coordinate specifies horizontal displacement from the y y y -axis and the y y y -coordinate specifies vertical displacement from the x x x -axis.
A relation is any set of ordered pairs; the domain comprises all input values ( x x x ), while the range comprises all output values ( y y y ).
A relation is a function if and only if each input value in the domain is paired with exactly one output value in the range; no x x x -value may map to multiple distinct y y y -values.
The Vertical Line Test states that a graph represents a function if and only if no vertical line intersects the curve at more than one point. Function notation f ( x ) f(x) f ( x ) represents the output value for an input x x x , not multiplication.
Last updated: September 2026
The Coordinate Plane, Plotting Points & Relations vs. Functions
Quick Summary: The Cartesian coordinate plane is defined by two perpendicular axes intersecting at the origin ( 0 , 0 ) (0,0) ( 0 , 0 ) , creating four quadrants labeled I through IV in a counterclockwise direction. A relation is any mathematical pairing of inputs ( x x x , the domain ) with outputs ( y y y , the range ). A relation qualifies as a function if and only if each input x x x is mapped to exactly one output y y y . Graphically, this is verified using the Vertical Line Test .
Coordinate geometry bridges pure arithmetic and spatial reasoning. On the HiSET Mathematics subtest, questions routinely require you to locate points, identify domain and range, determine whether a given graph or data set is a function, and evaluate expressions in function notation f ( x ) f(x) f ( x ) .
The Anatomy of the Cartesian Coordinate System
The Cartesian coordinate system is formed by the intersection of two perpendicular number lines on a two-dimensional flat surface (the coordinate plane):
The Horizontal Axis ( x x x -axis): Values increase to the right (positive) and decrease to the left (negative).
The Vertical Axis ( y y y -axis): Values increase upward (positive) and decrease downward (negative).
The Origin ( 0 , 0 ) (0,0) ( 0 , 0 ) : The central reference point where the x x x -axis and y y y -axis intersect. y-axis
- ▲
- │ Quadrant I
- Quadrant II │ (+, +)
- (-, +) │ x > 0, y > 0
- x < 0, y > 0 │
- │
- ─────────────────────────┼─────────────────────────► x-axis
- │ Origin (0,0)
- Quadrant III │ Quadrant IV
- (-, -) │ (+, -)
- x < 0, y < 0 │ x > 0, y < 0
- │
- ▼
- Quadrant Properties and Sign Conventions
The four quadrants are conventionally numbered using Roman numerals (I, II, III, IV) in a counterclockwise direction starting from the upper-right quadrant:
Quadrant / Location x x x -Coordinate Sign y y y -Coordinate Sign Coordinate Signs Example Point
Quadrant I Positive ( x > 0 x > 0 x > 0 ) Positive ( y > 0 y > 0 y > 0 ) ( + , + ) (+, +) ( + , + ) ( 4 , 7 ) (4, 7) ( 4 , 7 )
Quadrant II Negative ( x < 0 x < 0 x < 0 ) Positive ( y > 0 y > 0 y > 0 ) ( − , + ) (-, +) ( − , + ) ( − 5 , 3 ) (-5, 3) ( − 5 , 3 )
Quadrant III Negative ( x < 0 x < 0 x < 0 ) Negative ( y < 0 y < 0 y < 0 ) ( − , − ) (-,-) ( − , − ) ( − 8 , − 2 ) (-8, -2) ( − 8 , − 2 )
Quadrant IV Positive ( x > 0 x > 0 x > 0 ) Negative ( y < 0 y < 0 y < 0 ) ( + , − ) (+, -) ( + , − ) ( 6 , − 9 ) (6, -9) ( 6 , − 9 )
x x x -Axis (Horizontal) Any Real Number Zero ( y = 0 y = 0 y = 0 ) ( x , 0 ) (x, 0) ( x , 0 ) ( − 4 , 0 ) (-4, 0) ( − 4 , 0 ) or ( 5 , 0 ) (5, 0) ( 5 , 0 )
y y y -Axis (Vertical) Zero ( x = 0 x = 0 x = 0 ) Any Real Number ( 0 , y ) (0, y) ( 0 , y ) ( 0 , − 6 ) (0, -6) ( 0 , − 6 ) or ( 0 , 3 ) (0, 3) ( 0 , 3 )
The Origin Exactly Zero ( x = 0 x = 0 x = 0 ) Exactly Zero ( y = 0 y = 0 y = 0 ) ( 0 , 0 ) (0, 0) ( 0 , 0 ) ( 0 , 0 ) (0, 0) ( 0 , 0 )
Exam Watchout: Points that lie directly on the coordinate axes (such as ( 0 , 5 ) (0, 5) ( 0 , 5 ) or ( − 3 , 0 ) (-3, 0) ( − 3 , 0 ) ) do not belong to any quadrant. If a question asks which quadrant contains ( 0 , − 4 ) (0, -4) ( 0 , − 4 ) , the correct answer is that the point lies on the negative y y y -axis, not in Quadrant III or IV.
Plotting Ordered Pairs ( x , y ) (x, y) ( x , y )
Every point in the coordinate plane is uniquely designated by an ordered pair ( x , y ) (x, y) ( x , y ) :
The first value, x x x (the abscissa ), indicates how many units to move horizontally from the origin: move right if x > 0 x > 0 x > 0 and left if x < 0 x < 0 x < 0 .
The second value, y y y (the ordinate ), indicates how many units to move vertically from the horizontal position: move up if y > 0 y > 0 y > 0 and down if y < 0 y < 0 y < 0 .
Relations, Domain, and Range
In algebra, any collection of ordered pairs is called a relation . A relation establishes a relationship between two quantities: an input set and an output set.
Defining Domain and Range
Domain: The set of all possible input values ( x x x -coordinates or independent variable values).
Range: The set of all possible output values ( y y y -coordinates or dependent variable values). Relation: {(-2, 4), (0, 1), (3, 7), (5, 4)}
- Domain (Inputs / x-values): { -2, 0, 3, 5 }
- Range (Outputs / y-values): { 1, 4, 7 }
Note: When listing the domain or range as a mathematical set, duplicate values are written only once, and numbers are typically ordered from least to greatest.
Discrete vs. Continuous Domains
Discrete Relations: Composed of individual, separated points (e.g., the number of tickets sold vs. total revenue). The domain and range are listed as explicit sets of distinct numbers: Domain = { 1 , 2 , 3 , 4 } \text{Domain} = \{1, 2, 3, 4\} Domain = { 1 , 2 , 3 , 4 } .
Continuous Relations: Formed by an unbroken curve or line segment where all real numbers within an interval are included (e.g., temperature over time). Domain and range are expressed using inequalities or interval notation: Domain: − 4 ≤ x ≤ 6 and Range: − 2 ≤ y ≤ 10 \text{Domain: } -4 \le x \le 6 \quad \text{and} \quad \text{Range: } -2 \le y \le 10 Domain: − 4 ≤ x ≤ 6 and Range: − 2 ≤ y ≤ 10
The Definition of a Function
A function is a specialized relation with a strict mathematical rule: Every input x in the domain must map to EXACTLY ONE output y in the range. \text{Every input } x \text{ in the domain must map to } \mathbf{\text{EXACTLY ONE}} \text{ output } y \text{ in the range.} Every input x in the domain must map to EXACTLY ONE output y in the range.
The "One Output per Input" Principle
To determine whether a relation is a function:
Look for repeated x x x -values: If an x x x -value appears more than once with different y y y -values, the relation is NOT a function.
Outputs may repeat: Different x x x -values are permitted to share the same y y y -value. For example, f ( 2 ) = 9 f(2) = 9 f ( 2 ) = 9 and f ( − 2 ) = 9 f(-2) = 9 f ( − 2 ) = 9 is completely valid for a function (as seen in parabolas like y = x 2 y = x^2 y = x 2 ). VALID FUNCTION (Many-to-One Allowed): NOT A FUNCTION (One-to-Many Forbidden):
- Input (x) Output (y) Input (x) Output (y)
- 3 ───────────────► 9 4 ───────────────► 2
- 3 ───────────────► 9 4 ───────────────► -2 (Duplicate x!)
- 0 ───────────────► 0 7 ───────────────► 5
- Evaluating Function Representations
Representation Is it a Function? Mathematical Reason
{ ( 1 , 3 ) , ( 2 , 5 ) , ( 3 , 7 ) , ( 4 , 9 ) } \{(1, 3), (2, 5), (3, 7), (4, 9)\} {( 1 , 3 ) , ( 2 , 5 ) , ( 3 , 7 ) , ( 4 , 9 )} YES Every x x x -value { 1 , 2 , 3 , 4 } \{1, 2, 3, 4\} { 1 , 2 , 3 , 4 } is distinct and pairs with one y y y -value.
{ ( − 2 , 4 ) , ( 0 , 1 ) , ( 3 , 4 ) , ( 5 , 8 ) } \{(-2, 4), (0, 1), (3, 4), (5, 8)\} {( − 2 , 4 ) , ( 0 , 1 ) , ( 3 , 4 ) , ( 5 , 8 )} YES The output 4 4 4 repeats, but all x x x -values { − 2 , 0 , 3 , 5 } \{-2, 0, 3, 5\} { − 2 , 0 , 3 , 5 } are unique.
{ ( 4 , 1 ) , ( 4 , − 1 ) , ( 9 , 2 ) , ( 9 , − 2 ) } \{(4, 1), (4, -1), (9, 2), (9, -2)\} {( 4 , 1 ) , ( 4 , − 1 ) , ( 9 , 2 ) , ( 9 , − 2 )} NO The input x = 4 x = 4 x = 4 maps to both 1 1 1 and − 1 -1 − 1 ; x = 9 x = 9 x = 9 maps to 2 2 2 and − 2 -2 − 2 .
Table with x = [ 2 , 2 , 3 , 4 ] x = [2, 2, 3, 4] x = [ 2 , 2 , 3 , 4 ] and y = [ 5 , 8 , 11 , 14 ] y = [5, 8, 11, 14] y = [ 5 , 8 , 11 , 14 ] NO The input x = 2 x = 2 x = 2 produces conflicting outputs ( 5 5 5 and 8 8 8 ).
Loading diagram... Relation vs. Function Hierarchy and Decision Flowchart
The Vertical Line Test (VLT)
The Vertical Line Test is a visual and geometric method used to determine whether a graph on the coordinate plane represents a function.
The Vertical Line Test Rule
If any vertical line can be drawn through a graph such that it intersects the curve at more than one point , the graph is NOT a function .
Why does this rule work? A vertical line represents the equation x = c x = c x = c , where the input x x x is constant. If a vertical line intersects a graph at two points ( c , y 1 ) (c, y_1) ( c , y 1 ) and ( c , y 2 ) (c, y_2) ( c , y 2 ) where y 1 ≠ y 2 y_1 \neq y_2 y 1 = y 2 , then that single input c c c produces two distinct outputs, violating the fundamental definition of a function. PASSES VLT (IS A FUNCTION): FAILS VLT (NOT A FUNCTION):
- y y
- │ / (Linear) │ .---. (Circle)
- │ / │ / \
- ─────┼────/──────► x ─────┼───(───────)───► x
- │ / │ \ /
- │ / │ '---'
- │ │ │
- (Every vertical line (A vertical line intersects
- hits at most ONCE) the circle at TWO points)
- Common Graph Classifications on the HiSET
Valid Functions (Pass VLT): Non-vertical straight lines ( y = m x + b y = mx + b y = m x + b ), upward or downward parabolas ( y = a x 2 + b x + c y = ax^2 + bx + c y = a x 2 + b x + c ), absolute value V-shapes ( y = ∣ x ∣ y = |x| y = ∣ x ∣ ), and exponential curves ( y = 2 x y = 2^x y = 2 x ).
Not Functions (Fail VLT): Circles ( x 2 + y 2 = r 2 x^2 + y^2 = r^2 x 2 + y 2 = r 2 ), ellipses, sideways parabolas ( x = y 2 x = y^2 x = y 2 ), and vertical lines ( x = c x = c x = c , where the vertical line hits infinitely many points).
Function Notation: f ( x ) f(x) f ( x ) Mechanics & Evaluation
Function notation replaces the dependent variable y y y with the symbol f ( x ) f(x) f ( x ) , read aloud as "f of x" . y = f ( x ) y = f(x) y = f ( x )
f f f is the name of the function (other common letters include g , h , C , P g, h, C, P g , h , C , P ).
x x x represents the input variable (independent variable).
f ( x ) f(x) f ( x ) represents the resulting output value (dependent variable, equivalent to y y y ).
Critical Warning: f ( x ) f(x) f ( x ) does NOT mean f f f multiplied by x x x . It signifies that the rule named f f f is being applied to the input value x x x .
Evaluating Functions for Specific Inputs
To evaluate a function for a given input value, substitute that value in place of every instance of the variable x x x in the algebraic expression.
- Step-by-Step Worked Examples
- Example 1: Linear Function with a Negative Input
Evaluate f ( − 4 ) f(-4) f ( − 4 ) for the function f ( x ) = − 3 x + 7 f(x) = -3x + 7 f ( x ) = − 3 x + 7 .
Substitute − 4 -4 − 4 into the expression: f ( − 4 ) = − 3 ( − 4 ) + 7 f(-4) = -3(-4) + 7 f ( − 4 ) = − 3 ( − 4 ) + 7
- Apply multiplication of signed numbers: f ( − 4 ) = 12 + 7 f(-4) = 12 + 7 f ( − 4 ) = 12 + 7
- Add the terms: f ( − 4 ) = 19 f(-4) = 19 f ( − 4 ) = 19
(This corresponds to the coordinate point ( − 4 , 19 ) (-4, 19) ( − 4 , 19 ) on the graph of f ( x ) f(x) f ( x ) ).
Example 2: Quadratic Function with Exponent Rules
Evaluate g ( − 3 ) g(-3) g ( − 3 ) for the function g ( x ) = 2 x 2 − 5 x + 3 g(x) = 2x^2 - 5x + 3 g ( x ) = 2 x 2 − 5 x + 3 .
Substitute − 3 -3 − 3 for x x x : g ( − 3 ) = 2 ( − 3 ) 2 − 5 ( − 3 ) + 3 g(-3) = 2(-3)^2 - 5(-3) + 3 g ( − 3 ) = 2 ( − 3 ) 2 − 5 ( − 3 ) + 3
Evaluate exponents first ( ( − 3 ) 2 = + 9 (-3)^2 = +9 ( − 3 ) 2 = + 9 ): g ( − 3 ) = 2 ( 9 ) − 5 ( − 3 ) + 3 g(-3) = 2(9) - 5(-3) + 3 g ( − 3 ) = 2 ( 9 ) − 5 ( − 3 ) + 3
- Perform multiplications: g ( − 3 ) = 18 + 15 + 3 g(-3) = 18 + 15 + 3 g ( − 3 ) = 18 + 15 + 3
- Sum the values: g ( − 3 ) = 36 g(-3) = 36 g ( − 3 ) = 36
- Example 3: Solving for Input When Output is Known
For the function h ( x ) = 4 x − 9 h(x) = 4x - 9 h ( x ) = 4 x − 9 , find the value of x x x such that h ( x ) = 15 h(x) = 15 h ( x ) = 15 .
- Set the function expression equal to the target output 15 15 15 : 4 x − 9 = 15 4x - 9 = 15 4 x − 9 = 15
- Add 9 to both sides: 4 x = 24 4x = 24 4 x = 24
- Divide by 4: x = 6 x = 6 x = 6
(When the input is 6 6 6 , the output is 15 15 15 , corresponding to the ordered pair ( 6 , 15 ) (6, 15) ( 6 , 15 ) ).
Example 4: Reading Function Values from a Graph
Suppose a graph shows a curve labeled y = f ( x ) y = f(x) y = f ( x ) :
To find f ( 2 ) f(2) f ( 2 ) : Locate x = 2 x = 2 x = 2 on the horizontal axis, move vertically to meet the curve, and read the corresponding y y y -value on the vertical axis.
To find x x x when f ( x ) = − 3 f(x) = -3 f ( x ) = − 3 : Locate y = − 3 y = -3 y = − 3 on the vertical axis, move horizontally to find all points where the curve has that height, and read their corresponding x x x -coordinates.