Study guide
14.3 Earthquakes, Volcanoes & the Rock Cycle
HiSET Science Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Scientific Inquiry, Data Interpretation, Experimental Design & Scientific Evaluation
1.1 The Scientific Method, Hypotheses & Experimental Variables 1.2 Interpreting Data Visualizations: Graphs, Data Tables, Charts & Trends 1.3 Evaluating Experimental Design, Sample Size, Validity & Sources of Error 1.4 Scientific Models, Evidence-Based Explanations & Correlation vs. Causation 1.5 Identifying the Research Question & Selecting the Best Procedure 1.6 Hypotheses, Assumptions, Data & Conclusions: Relevance and Source Reliability
2 Chapter 2: Cell Structure, Function & Transport
2.1 Cell Theory, Prokaryotes vs. Eukaryotes, and Cellular Organization 2.2 Eukaryotic Organelles: Nucleus, Mitochondria, Ribosomes, ER, Golgi, and Lysosomes 2.3 Plant vs. Animal Cell Specializations and Cellular Transport (Diffusion, Osmosis, and Active Transport)
3 Chapter 3: Cellular Energy & Cell Division
3.1 Photosynthesis: Light Reactions, Calvin Cycle, Chloroplast Structure, and Energy Storage in Glucose 3.2 Cellular Respiration, Glycolysis, Krebs Cycle, Electron Transport, and Aerobic vs. Anaerobic Fermentation 3.3 The Cell Cycle, Mitosis (Asexual Reproduction/Somatic Growth) vs. Meiosis (Gamete Formation, Crossing Over, Genetic Variation)
4 Chapter 4: Molecular Genetics, Inheritance & Punnett Squares
4.1 DNA Structure, Double Helix, Nucleotides, and Semi-Conservative Replication 4.2 RNA Types, Transcription, Translation, and the Universal Genetic Code 4.3 Mendelian Inheritance, Dominant vs. Recessive Alleles, Genotype vs. Phenotype, and Monohybrid Punnett Squares
5 Chapter 5: Complex Genetics, Mutations & Biotechnology
5.1 Complex Inheritance: Incomplete Dominance, Codominance, Sex-Linked Traits, Polygenic Traits, and Pedigrees 5.2 Genetic Mutations: Point Mutations, Frameshift Mutations, Chromosomal Aberrations, and Environmental Mutagens 5.3 Modern Biotechnology: Recombinant DNA, PCR, Gel Electrophoresis, GMOs, and Gene Therapy Ethics
6 Chapter 6: Evolution, Natural Selection & Classification
6.1 Darwinian Natural Selection, Adaptation & Evolutionary Fitness 6.2 Evidence for Evolution: Fossils, Anatomy & Molecular Homology 6.3 Speciation Mechanisms, Cladograms & Biological Classification
7 Chapter 7: Ecology, Food Webs & Biogeochemical Cycles
7.1 Levels of Ecological Organization, Biotic & Abiotic Factors, and Global Biomes 7.2 Trophic Levels, Food Webs & Ecological Energy Pyramids 7.3 Biogeochemical Cycles: Hydrologic, Carbon-Oxygen & Nitrogen Cycles
8 Chapter 8: Population Dynamics, Ecological Interactions & Succession
8.1 Community Interactions: Competition, Predation & Symbiosis 8.2 Population Dynamics: Growth Curves & Limiting Factors 8.3 Ecological Succession, Biodiversity & Ecosystem Resilience
9 Chapter 9: Human Body Systems & Homeostasis
9.1 Circulatory and Respiratory Systems: Heart Chambers, Systemic vs. Pulmonary Circuits, Blood Vessels, Blood Components, Alveolar Gas Exchange, and Oxygen/CO2 Transport 9.2 Digestive and Excretory Systems: Mechanical vs. Chemical Digestion, Peristalsis, Enzyme Action, Small Intestine Absorption, and Nephron Function 9.3 Nervous and Endocrine Systems: Neuron Anatomy, Action Potentials, Synapses, Central vs. Peripheral Nervous System, Reflex Arcs, Endocrine Glands and Hormones, and Skeletal-Muscular Lever Action 9.4 Immune Defense, Pathogens, Vaccines, and Systemic Homeostasis via Negative Feedback Loops
10 Chapter 10: Chemistry: Atoms, Periodic Table & Chemical Bonding
10.1 Atomic Structure, Subatomic Particles & Isotopes 10.2 The Periodic Table, Groups, Periods & Periodic Trends 10.3 Chemical Bonding: Ionic, Covalent & Metallic Bonds
11 Chapter 11: Chemical Reactions, States of Matter, Acids & Bases
11.1 Physical vs. Chemical Changes, Reaction Types & Conservation of Mass 11.2 States of Matter, Kinetic Molecular Theory & Phase Transitions 11.3 Solutions, Solubility, Acids, Bases & the pH Scale
12 Chapter 12: Physics: Motion, Newton's Laws & Energy Conservation
12.1 Kinematics: Distance, Displacement, Velocity & Motion Graphs 12.2 Newton's Laws of Motion, Friction & Universal Gravitation 12.3 Work, Power & Conservation of Mechanical Energy
13 Chapter 13: Physics: Waves, the Electromagnetic Spectrum, Electricity & Magnetism
13.1 Wave Mechanics: Properties, Behaviors & Sound Waves 13.2 The Electromagnetic Spectrum: Waves, Photons & Applications 13.3 Electricity, Circuits & Electromagnetism
14 Chapter 14: Earth's Structure, Plate Tectonics & the Rock Cycle
14.1 Earth's Interior Structure: Compositional & Mechanical Layers 14.2 Plate Tectonics: Seafloor Spreading, Convection & Plate Boundaries 14.3 Earthquakes, Volcanoes & the Rock Cycle
15 Chapter 15: Geologic Time, Fossils, Hydrosphere & the Water Cycle
15.1 Weathering, Erosion, Deposition & Soil Horizons 15.2 Geologic Time, Stratigraphy & the Fossil Record 15.3 The Global Hydrosphere, Groundwater Dynamics & Oceans
16 Chapter 16: Atmosphere, Weather Systems & Climate Change
16.1 Earth's Atmosphere: Composition, Pressure Dynamics & Thermal Layers 16.2 Weather Systems, Air Masses, Frontal Boundaries & Severe Storms 16.3 Climate Dynamics, the Greenhouse Effect & Earth's Resources
17 Chapter 17: Astronomy: Solar System, Earth-Moon System & the Universe
17.1 The Solar System & Gravitational Motion 17.2 The Earth-Moon-Sun System: Cycles, Seasons, Phases & Tides 17.3 Stars, Stellar Evolution & Modern Cosmology
14.3 Earthquakes, Volcanoes & the Rock Cycle
Key Takeaways Explain This Topic AI
Earthquakes originate at the subsurface focus (hypocenter), while the epicenter is the surface point directly above it; locating an epicenter requires triangulating P-S wave arrival lag times from at least three seismograph stations.
Volcanic eruptions are fueled by subduction flux melting at convergent boundaries and decompression melting at intraplate hotspots, where stationary mantle plumes create age-progressive island chains.
The rock cycle is an open, dynamic system in which any rock type can be transformed into any other rock type through igneous, sedimentary, and metamorphic processes.
Intrusive igneous rocks cool slowly underground forming large, visible crystals (phaneritic texture), whereas extrusive igneous rocks cool rapidly on the surface forming fine-grained (aphanitic) or glassy textures.
Fossils are preserved almost exclusively in sedimentary rocks because the extreme temperatures of melting (igneous) and crushing differential pressures (metamorphic) obliterate organic remains.
Last updated: September 2026
Earthquakes, Volcanoes & the Rock Cycle
Quick Answer: Earthquakes release stored elastic strain along faults; rupture begins at the subterranean focus (hypocenter) directly below the surface epicenter . Seismologists locate epicenters via triangulation using P-S wave lag times from at least three seismograph stations . Volcanoes form through subduction flux melting at convergent margins and decompression melting over stationary mantle hotspots (e.g., Hawaii). Earth materials continuously transform through the rock cycle : igneous rocks crystallize from molten melt (coarse intrusive vs. fine extrusive), sedimentary rocks form via weathering and lithification (the only rock family preserving intact fossils), and metamorphic rocks form through heat and directed pressure without melting (foliated vs. non-foliated).
Chapter 14 concludes by connecting tectonic motion to seismic rupture, volcanism, and the rock cycle, illustrating how Earth continuously recycles energy and mineral matter.
Earthquake Mechanics & Fault Behavior
An earthquake is the sudden vibration of Earth's crust caused by rapid energy release along a fault . The rupture process follows elastic rebound theory (Harry Fielding Reid):
Frictional Locking: Tectonic forces exert continuous stress, but fault roughness ( asperities ) locks the fault plane.
Elastic Strain: Adjacent rock bends elastically, storing potential strain energy.
Brittle Rupture: When shear stress overcomes frictional resistance, the fault slips suddenly.
Rebound: Rock snaps back to its unstrained geometry, radiating seismic waves.
Focus (Hypocenter) vs. Epicenter
Understanding earthquake geometry is critical for the HiSET exam:
Focus (Hypocenter): The exact point deep within the crust or mantle where fault slippage begins and seismic waves originate.
Epicenter: The geographic point on Earth's surface vertically above the focus . The epicenter typically experiences the most severe surface shaking.
Triangulation: Locating Epicenters via P-S Wave Lag Time
Compressional P-waves ( v P ≈ 6.0 km/s v_P \approx 6.0\text{ km/s} v P ≈ 6.0 km/s ) travel faster than shear S-waves ( v S ≈ 3.5 km/s v_S \approx 3.5\text{ km/s} v S ≈ 3.5 km/s ), arriving at seismograph stations first.
As distance from the epicenter increases, the P-S arrival lag time ( Δ t = t S − t P \Delta t = t_S - t_P Δ t = t S − t P ) increases systematically . Seismologists convert this lag time into an epicentral distance ( r r r ):
One Station: Yields distance r 1 r_1 r 1 . The epicenter could lie anywhere along a circle of radius r 1 r_1 r 1 .
Two Stations: Two distance circles intersect at two distinct points .
Three Stations: A third station's circle intersects at a single unique geographic point , uniquely identifying the epicenter.
Volcanic Activity: Subduction vs. Hotspots
Volcanism vents molten rock and gases onto Earth's surface across two primary geodynamic settings:
1. Subduction Volcanism (Flux Melting)
At convergent subduction zones, hydrous marine minerals descend into the mantle. Trapped water is released into the overlying mantle wedge, lowering the melting point of mantle peridotite ( flux melting ). The resulting buoyant magma rises to build volcanic island arcs (e.g., the Aleutians) or continental volcanic arcs (e.g., the Cascades).
2. Hotspot Volcanism (Mantle Plumes)
A hotspot is an intraplate volcanic center fueled by a stationary plume of hot rock rising from near the core-mantle boundary. As a tectonic plate drifts over a stationary mantle plume , a sequential track of volcanoes develops:
The active volcano sits directly above the plume (e.g., Kilauea on Hawaii's Big Island).
Extinct, eroded volcanoes trail away in the direction of plate motion (e.g., Maui, Oahu, Kauai, and the submerged Emperor Seamounts).
Island ages increase linearly with distance, documenting plate motion.
Note
Magma vs. Lava: Molten rock underground is magma ; at the surface, it is lava . Felsic lavas are viscous and explosive (Mt. St. Helens); mafic lavas are fluid and effusive (Hawaiian shield volcanoes).
The Rock Cycle: Continuous Terrestrial Recycling
The rock cycle illustrates how Earth materials transform among three primary rock families:
Rock Family Formation Process Distinguishing Texture Common Examples Diagnostic HiSET Signature
Igneous (Intrusive) Slow cooling of magma deep underground Coarse-grained ( phaneritic ); visible crystals Granite, Diorite, Gabbro Interlocking, visible crystals from slow cooling.
Igneous (Extrusive) Rapid cooling of lava on surface Fine-grained ( aphanitic ), glassy, or vesicular Basalt, Obsidian, Pumice Microscopic crystals, volcanic glass, or gas bubbles.
Sedimentary (Clastic) Weathering, erosion, deposition, lithification Layered strata ( bedding ), cemented fragments Sandstone, Shale, Conglomerate Uniquely preserves intact fossils ; layered clasts.
Sedimentary (Chemical) Mineral precipitation or organic shell buildup Crystalline or fossiliferous beds Limestone, Rock Salt, Coal Calcite reactivity with acid; shell fragments.
Metamorphic (Foliated) Heat and directed differential pressure Parallel mineral alignment; banded striping Slate, Schist, Gneiss Wavy mineral banding ( gneissic banding ).
Metamorphic (Non-foliated) Heat and uniform pressure without melting Recrystallized interlocking crystalline grains Marble, Quartzite Uniform crystalline texture; no mineral banding.
Rock Cycle Transformation Pathways
Igneous: Magma cooling slowly underground forms coarse intrusive rock (granite); lava cooling rapidly on the surface forms fine extrusive rock (basalt) or glass (obsidian).
Sedimentary: Weathering breaks exposed rock into sediment. Overburden weight squeezes grains ( compaction ), and dissolved minerals precipitate ( cementation ), lithifying sediment into rock.
Metamorphic: Deep burial subjects rocks to heat ( > 200 ∘ C >200^\circ\text{C} > 20 0 ∘ C ) and pressure without melting, aligning minerals into foliated bands (e.g., slate → \rightarrow → gneiss ). If rock melts completely, it returns to magma.
HiSET Exam Traps & Strategic Takeaways
Trap: Focus vs. Epicenter: The focus is subterranean where rupture begins; the epicenter is the surface point directly above it.
Trap: Triangulation Minimum: Exactly three seismograph stations are required to locate a unique epicenter.
Trap: Crystal Size: Slow underground cooling yields large crystals (intrusive granite); rapid surface cooling yields microscopic crystals (extrusive basalt).
Trap: Fossil Preservation: Fossils exist almost exclusively in sedimentary rocks because igneous melting and metamorphic recrystallization destroy organic remains.