Study guide

14.2 Traffic Lights & Lane / Tunnel Signals

Hong Kong Taxi and Ride-hailing Vehicle Combined Written Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Snapshot

1.1 Purpose, Owner & Why the Test Exists 1.2 Eligibility & Disqualifying Convictions 1.3 Application, Fees & 2026 Test Status

2 Format, Centre & After the Test

2.1 Format, Timing & Dual Pass Marks 2.2 Centre, Languages, Documents & Exam Rules 2.3 Results, Retake, Licence & Pre-service Course

3 Taximeter & Fare Receipts

3.1 Taximeter Approval & Construction 3.2 Positions, Testing, Seals & Offences 3.3 Receipt Printing Device

4 JRS, Signs & Vehicle Markings

4.1 Journey Recording Systems (JRS) 4.2 Illuminated Roof Signs & Body Markings 4.3 Capacity Plates & General Taxi Appearance

5 Stands, Pick-up & For-Hire Duties

5.1 Pick-up, Set-down & Taxi Stands 5.2 For-Hire Status & Stand Queue Order 5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

6 Fares, Vehicle Hire & Fleet Regime

6.1 Fare Scales: Urban, NT & Lantau 6.2 Extra Charges & Tunnel / Toll Rules 6.3 Vehicle Hiring Documents & Taxi Fleet Regime

7 Passengers, Property & Driver Conduct

7.1 Goods & Baggage Rules 7.2 Animals, Lost Property & Seat Belts 7.3 Core Obligations: Accept Hire, Route & Passengers 7.4 Change, E-payment & General Conduct

8 Taxi-Driver-Offence Points

8.1 TDOP Offences & Point Values 8.2 Advice Notices & Taxi Service Improvement Course 8.3 Disqualification & Two-tier Penalties

9 Locations: Hospitals & Tourist Spots

9.1 Hospitals — Hong Kong Island & Kowloon 9.2 Hospitals — New Territories, Lantau & Private 9.3 Tourist Spots, Museums & Performance Venues

10 Locations: Hotels & Government

10.1 Major Hotels by District 10.2 Government Offices & District Police Stations 10.3 Courts, LegCo & Major Public Buildings

11 Commercial, Residential, Education & Routes

11.1 Commercial Buildings & Shopping Malls 11.2 Residential Landmarks 11.3 Higher Education Institutions 11.4 Route Planning Method

12 RUC: Fitness, Speed & Lanes

12.1 Fitness, Safety Checks, Seat Belts & Child Safety 12.2 Speed Limits & Stopping Distance 12.3 Overtaking, White Lines & Lane Discipline

13 RUC: Junctions & Vulnerable Users

13.1 Junctions, Roundabouts & Priority 13.2 Pedestrians, Cyclists & Other Road Users 13.3 Zebra & Green Man Crossings

14 RUC: Signs, Lights & Markings

14.1 Signs Giving Orders & Warnings 14.2 Traffic Lights & Lane / Tunnel Signals 14.3 Road Markings: Orders, Warning & Information 14.4 Stopping & Parking Restrictions

15 RUC: Weather, Emergencies & Professional Driving

15.1 Weather, Night Driving & Road Works 15.2 Emergencies, Breakdowns & Accidents 15.3 Professional / Commercial Driver Duties 15.4 Tunnels, Expressways & Control Areas

16 RUC: Other Road Users & the Language of Signals

16.1 Pedestrian Rules & the Road Crossing Code 16.2 Passengers, Public Transport & Taxi Operating Areas 16.3 Motor Cycles & Motor Tricycles 16.4 Signals, Arm Signals & Authorised Persons

14.2 Traffic Lights & Lane / Tunnel Signals

Key Takeaways Explain This Topic AI

Green means you may go if safe; amber after green means stop unless you are so close that a sudden stop might cause an accident; red means stop behind the Stop line; red+amber means remain stationary but may prepare to move when green shows safely.

A green filter arrow may light with red still showing — you may go only in the arrow’s direction if safe; separate lane lights apply only to their own lanes.

Do not enter a junction on green if your exit is blocked; keep yellow boxes and pedestrian crossings clear.

Lane signals on tunnels, control areas, and expressways/trunk roads: green arrow/light or blank may proceed if safe; flashing amber = danger ahead, drive with caution; diagonal green arrow = leave the lane that way when safe; red cross/red light = do not proceed in that lane.

Secondary traffic lights matter if the primary fails; once past the Stop line, continue with care without re-checking the signals as if restarting the approach.

Last updated: August 2026

14.2 Traffic Lights & Lane / Tunnel Signals

Quick Answer: Green — go if safe. Amber (after green) — stop unless so close that a sudden stop might cause an accident. Red — stop behind the Stop line . Red + amber — stay stopped; may prepare to move when green shows safely. A green filter arrow may allow movement in the arrow direction even if red still shows. Lane signals (tunnels/expressways): green/blank = lane open if safe; flashing amber = danger ahead; diagonal green arrow = leave lane that way when safe; red cross / red light = do not proceed in that lane.

Section 14.1 covered static signs. This section covers traffic lights for drivers , filter arrows , secondary signals , and lane signals used in tunnel areas, control areas, and trunk roads / expressways — high-frequency Part B and daily taxi skills.

Traffic Lights Control Everyone

Traffic lights control drivers, cyclists, and pedestrians . At a signalised junction you must follow:

  • The light signals that apply to your approach / lane
  • Related traffic signs and road markings (Stop line, arrows, turn bans)
  • Rules that keep the junction clear even when the light facing you is green

You wait behind the Stop line when you must not go. Entering on red, or stopping across the pedestrian area, is both an exam fail pattern and a real collision factory.

Core Light Meanings for Drivers and Cyclists

Learn the RUC table as fixed facts:

Signal Meaning If already stopped If approaching

Green You may move across if safe Go if way clear; give way to pedestrians still on the crossing Cross carefully; do not accelerate just because green appears; check right–left–right; give way to pedestrians still crossing

Amber (follows green) You must stop unless so close that stopping suddenly might cause an accident Stay behind Stop line Slow and stop behind Stop line in the correct lane

Red (follows amber) You must stop behind the Stop line Stay stopped Slow and stop behind Stop line in correct lane

Red + amber together Remain stationary ; may prepare to move when green shows, if safe Stay put; prepare only Slow; do not enter until green

Amber: the high-yield trap

Amber is not “speed up to beat the light.” Amber after green is a stop signal with a narrow exception: you may continue only if you are so close that a sudden stop might cause an accident . Taxi pressure (“the meter is running,” “passenger is late”) never rewrites amber.

Red + amber is not green

Hong Kong uses red and amber together before green. That combination means prepare , not go. Moving off on red+amber is a classic error.

Green is permission, not a command to block

Green allows movement if safe . You must still:

  • Give way to pedestrians still on the crossing
  • Avoid entering if traffic ahead is blocked so you would stop in the junction, box, or crossing
  • Obey any signs that qualify green (banned turns, mandatory directions)
  • Secondary Traffic Lights

At many junctions, secondary (duplicate) signals sit on the far side or sometimes the near side. If the main signal fails (for example a green lamp fails), obey the secondary as if it were the main light.

Once you are clear of the Stop line , continue with care without treating the far signal as a new “start from stop” instruction in the RUC sense — you do not freeze mid-junction because you re-read a secondary display as a fresh red for a vehicle already lawfully committed and clear of the line. The professional point: primary failure → use secondary on approach; once past the line, clear the junction carefully.

  • Filter Arrows and Special Green Controls
  • Green arrow with red still showing

A green arrow may light even though the red light is still showing . Meaning:

You may go in the direction shown by the arrow if it is safe , whatever the other lights show for other movements.

You may not invent extra movements the arrow does not allow. Straight-ahead on a left-filter-only arrow is wrong.

Green arrow replacing full green

If movement is allowed only in one direction , a green arrow may replace the full green. Signs often reinforce that single permitted movement.

Indicative right-turn green arrow (right-turn pocket)

At some junctions with a right-turn pocket :

When the full green is on and the right-turn arrow is off , right-turners may move into the pocket and wait for a safe gap in opposing traffic, then turn when safe; other movements may still run

When the right-turn arrow is also on , opposing traffic is held on red — you may complete the right turn if safe

Separate lights per lane

Some junctions give different lights to different lanes . Obey only the lights for your lane . Looking at the adjacent lane’s green is not a licence to go.

Signs with lights

Signs may qualify green — for example banning a turn or forcing a direction. Green never authorises a signed prohibited turn.

Intermittent Red (Wig-Wag) Warning Signals

Where red lights flash alternately (wig-wag), all approaching vehicles must stop until both red lights have stopped flashing. These appear where traffic is stopped only infrequently (for example fire station exits). Treat them as a hard stop, not a “peek and go.”

Do Not Block the Junction on Green

Part B and professional practice share one rule:

Even on green, do not enter unless you can clear the junction (and any yellow box / pedestrian crossing) without stopping in it.

If traffic ahead is jammed, wait before the junction until there is room. Horns do not create space. Stopping on the pedestrian crossing “to save a car length” endangers people and fails the Code’s clear-junction idea.

Lane Signals: Tunnels, Control Areas, Expressways / Trunk Roads

Lane signals are common in tunnel areas , control areas , and on trunk roads / expressways . They may be overhead (one per lane) or at the roadside / central reservation / tunnel wall.

In normal conditions they may be off , show a green downward arrow , or a green light . When something is wrong, amber warnings and red closures appear. Always act on them — danger may exist even if you cannot yet see it.

  • Display Meaning / action
  • Green downward arrow , green light , or blank face You may proceed in that lane if safe
  • Flashing amber Danger ahead (accident, obstruction, weather). Drive with caution ; be prepared to stop

Green diagonal downward arrow (left or right) You must leave the lane in the direction shown when safe; do not change suddenly; if you reach danger or a red before you can leave safely, stop and wait in that lane until a safe change is possible

  • Red cross or red light You must not proceed beyond the signal in that lane
  • Professional tunnel / expressway habits for taxis
  • Pick the correct lane early from overhead arrows and guide signs — late cuts cause sideswipes
  • Never treat a red-cross lane as “empty short cut”
  • On flashing amber, drop speed and increase gap; passengers can wait
  • If directed out of a lane, signal, check mirrors/blind spots, and move only when safe
  • Tunnel / control staff signals and signs have authority — stop when directed
  • Professional Driving Through Signalised Corridors

Urban taxi work is a chain of signalised junctions. Build a repeatable routine:

Read far — see the light colour early; choose the correct lane before the solid line traps you

Match speed to amber risk — approach so you can stop smoothly if amber appears, not so fast that “too close” becomes your only story

  • Hold behind the line on red and red+amber
  • On green , re-check pedestrians and the exit space; then move smoothly for passenger comfort
  • Filter arrows — move only in the arrow direction; do not expand the permission
  • Lane signals in tunnels/expressways — treat red and diagonal arrows as hard safety orders
  • Common Exam Traps
  • Trap Correct view
  • Amber means hurry through Amber means stop unless stopping suddenly would cause an accident
  • Red + amber means go Means prepare , remain stationary
  • Green always means enter now Enter only if safe and you can clear the junction
  • Filter arrow + red allows any movement Only the arrow direction
  • Adjacent lane’s green is good enough Obey your lane’s signals
  • Red cross overhead is advisory Do not proceed in that lane
  • Flashing amber can be ignored if road looks empty Danger may be unseen — caution , prepare to stop
  • Closing Checklist for Section 14.2

Memorise green / amber / red / red+amber duties for stopped and approaching vehicles.

Amber = stop unless sudden stop would cause an accident; never “race the amber.”

Filter green arrow may run with red — only the arrow’s path, if safe.

Per-lane lights — obey only your lane; signs may qualify green.

Secondary lights cover primary failure on approach; clear the junction carefully once past the Stop line.

Wig-wag reds — stop until flashing ends.

Lane signals — green/blank open if safe; flashing amber caution; diagonal leave lane; red cross closed.

Never block junctions, yellow boxes, or crossings just because your light is green.

Next, Section 14.3 covers road markings that give orders, warnings, and information — including yellow boxes and keep-clear rules taxis meet every hour.