Study guide

5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

Hong Kong Taxi and Ride-hailing Vehicle Combined Written Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Snapshot

1.1 Purpose, Owner & Why the Test Exists 1.2 Eligibility & Disqualifying Convictions 1.3 Application, Fees & 2026 Test Status

2 Format, Centre & After the Test

2.1 Format, Timing & Dual Pass Marks 2.2 Centre, Languages, Documents & Exam Rules 2.3 Results, Retake, Licence & Pre-service Course

3 Taximeter & Fare Receipts

3.1 Taximeter Approval & Construction 3.2 Positions, Testing, Seals & Offences 3.3 Receipt Printing Device

4 JRS, Signs & Vehicle Markings

4.1 Journey Recording Systems (JRS) 4.2 Illuminated Roof Signs & Body Markings 4.3 Capacity Plates & General Taxi Appearance

5 Stands, Pick-up & For-Hire Duties

5.1 Pick-up, Set-down & Taxi Stands 5.2 For-Hire Status & Stand Queue Order 5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

6 Fares, Vehicle Hire & Fleet Regime

6.1 Fare Scales: Urban, NT & Lantau 6.2 Extra Charges & Tunnel / Toll Rules 6.3 Vehicle Hiring Documents & Taxi Fleet Regime

7 Passengers, Property & Driver Conduct

7.1 Goods & Baggage Rules 7.2 Animals, Lost Property & Seat Belts 7.3 Core Obligations: Accept Hire, Route & Passengers 7.4 Change, E-payment & General Conduct

8 Taxi-Driver-Offence Points

8.1 TDOP Offences & Point Values 8.2 Advice Notices & Taxi Service Improvement Course 8.3 Disqualification & Two-tier Penalties

9 Locations: Hospitals & Tourist Spots

9.1 Hospitals — Hong Kong Island & Kowloon 9.2 Hospitals — New Territories, Lantau & Private 9.3 Tourist Spots, Museums & Performance Venues

10 Locations: Hotels & Government

10.1 Major Hotels by District 10.2 Government Offices & District Police Stations 10.3 Courts, LegCo & Major Public Buildings

11 Commercial, Residential, Education & Routes

11.1 Commercial Buildings & Shopping Malls 11.2 Residential Landmarks 11.3 Higher Education Institutions 11.4 Route Planning Method

12 RUC: Fitness, Speed & Lanes

12.1 Fitness, Safety Checks, Seat Belts & Child Safety 12.2 Speed Limits & Stopping Distance 12.3 Overtaking, White Lines & Lane Discipline

13 RUC: Junctions & Vulnerable Users

13.1 Junctions, Roundabouts & Priority 13.2 Pedestrians, Cyclists & Other Road Users 13.3 Zebra & Green Man Crossings

14 RUC: Signs, Lights & Markings

14.1 Signs Giving Orders & Warnings 14.2 Traffic Lights & Lane / Tunnel Signals 14.3 Road Markings: Orders, Warning & Information 14.4 Stopping & Parking Restrictions

15 RUC: Weather, Emergencies & Professional Driving

15.1 Weather, Night Driving & Road Works 15.2 Emergencies, Breakdowns & Accidents 15.3 Professional / Commercial Driver Duties 15.4 Tunnels, Expressways & Control Areas

16 RUC: Other Road Users & the Language of Signals

16.1 Pedestrian Rules & the Road Crossing Code 16.2 Passengers, Public Transport & Taxi Operating Areas 16.3 Motor Cycles & Motor Tricycles 16.4 Signals, Arm Signals & Authorised Persons

5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

Key Takeaways Explain This Topic AI

When standing or plying for hire, the fare table (English and Chinese), vehicle registration mark, and taxi driver identity plate must be clearly visible and legible to a passenger.

The fare table’s design and position are as specified by the Commissioner; it must appear in both English and Chinese.

The identity plate sits in a holder of size, design, and position specified by the Commissioner; captions read “TAXI DRIVER IDENTITY PLATE” and “的士司機證.”

The plate shows the driver’s full name as on the identity document (English and Chinese where appropriate) and the driver’s photograph; the holder shows the taxi’s registration mark.

At a cross-harbour taxi stand, a driver may refuse a hire that is not for a destination across the harbour via the Cross-Harbour Tunnel, Western Harbour Crossing, or Eastern Harbour Crossing.

Last updated: August 2026

5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

Quick Answer: When standing or plying for hire , keep clearly visible and legible to a passenger: (i) the fare table in English and Chinese (Commissioner design/position), (ii) the vehicle registration mark , and (iii) the taxi driver identity plate in its holder — captions “TAXI DRIVER IDENTITY PLATE” / “的士司機證” , full name as on the ID (EN and Chinese where appropriate), photograph , and holder showing the taxi registration mark . At a cross-harbour taxi stand , the driver may refuse a hire that is not for a destination across the harbour via CHT, WHC, or EHC .

Sections 5.1–5.2 covered stands, stopping, queue order, and hire signals. This section (§VI.7–6.8 style content) is about what the passenger must be able to see when you are free for hire, and the one major stand-type exception to normal accept-hire expectations: cross-harbour taxi stands .

Visibility Duty When Standing or Plying for Hire

Whenever the taxi is standing or plying for hire , specified items must be clearly visible and legible to a passenger . “Plying for hire” means seeking passengers (street work or stand work while free). Hidden, face-down, faded beyond reading, or Chinese-only/English-only fare tables that fail the bilingual rule will not satisfy the duty.

Think of three pillars of in-cab transparency:

  • How much will this cost? → fare table
  • Which vehicle is this? → registration mark
  • Who is driving? → taxi driver identity plate

All three serve passenger trust, enforcement, and complaint follow-up.

(i) Fare Table — English and Chinese

The fare table must be:

  • displayed so a passenger can clearly see and read it,
  • in English and Chinese , and

of a design and position determined by the Commissioner (for Transport).

Drivers do not invent their own fare-card layout. The Commissioner specifies how the table looks and where it sits in the vehicle. Exam items may claim that English-only is enough for tourists, or that the driver may tape a handwritten card anywhere convenient — both fail. Bilingual + Commissioner design/position is the package.

The fare table is separate from the taximeter dial. The meter shows the running amount; the table explains the published scale (flagfall, distance/time steps, extras) so the passenger can understand how the meter should behave. Fare-scale numbers themselves are Chapter 6 material; here the duty is display of the lawful bilingual table.

(ii) Vehicle Registration Mark

The vehicle registration mark must also be clearly visible and legible to a passenger when the taxi is standing or plying for hire. Passengers and officers need to identify the specific vehicle — essential for lost property, complaints, and incident reports. Do not obscure the displayed registration with stickers, folders, or poorly placed equipment.

This in-cab / passenger-facing visibility of the registration mark sits alongside external plates; the Written Test emphasis here is that a passenger inside (or engaging the cab) can read it as part of the for-hire display set.

(iii) Taxi Driver Identity Plate and Holder

The taxi driver identity plate must be shown in a holder . Size, design, and position of the plate/holder arrangements are as specified by the Commissioner .

Mandatory captions

The plate carries bilingual captions:

  • Language Caption
  • English TAXI DRIVER IDENTITY PLATE
  • Chinese 的士司機證

Memorise both strings. Exam options may garble the Chinese, drop one language, or substitute “Taxi Licence” / “Driver Card” wording.

What the plate and holder show

  • Item Requirement
  • Full name As on the driver’s identity document , in English and Chinese where appropriate
  • Photograph The driver’s photograph
  • Holder Shows the taxi registration mark

Name must match the ID document — not a nickname, radio callsign, or incomplete English-only spelling when Chinese appears on the ID. The photograph lets passengers confirm they are dealing with the licensed driver. The holder links that driver identity to this taxi by displaying the taxi’s registration mark on the holder itself.

Together, plate + holder answer: Who is driving this registered taxi?

Common identity-plate traps

Photo optional if the name is clear — false (photograph is required).

Holder need not show registration if the vehicle plate is outside — false (holder shows the taxi registration mark).

Captions may be English only — false (English and Chinese captions).

Driver designs a personal badge — false (Commissioner size/design/position).

Cross-Harbour Taxi Stands: Special Refuse Rule

A cross-harbour taxi stand is a stand type the Commissioner for Transport may designate (Section 5.1). At such a stand, the Booklet gives a focused right to refuse certain hires.

When the driver may refuse

At a cross-harbour taxi stand , the driver may refuse a hire that is not for a destination across the harbour by way of one of the three harbour crossings:

  • Cross-Harbour Tunnel (CHT)
  • Western Harbour Crossing (WHC)
  • Eastern Harbour Crossing (EHC)

In plain language: the stand is for cross-harbour work. A passenger who only wants a short trip that does not go across the harbour via CHT, WHC, or EHC can be refused at that stand. That is an exception to the general expectation that a free taxi accepts lawful hire (detailed further in passenger-conduct chapters).

What the rule does not say

  • Misreading Correct approach
  • Driver may refuse any hire at any stand Special refuse rule is for cross-harbour taxi stands , not every stand
  • Driver must accept only WHC trips Any of CHT, WHC, or EHC cross-harbour destinations qualify

Driver may refuse a true cross-harbour hire for convenience The permission is to refuse hires that are not cross-harbour via those tunnels

“Across the harbour” includes any long NT trip The rule is tied to harbour crossing via the three named tunnels

Tunnel toll and extra charging is Chapter 6; here the point is accept vs refuse at the stand , not how much the toll line shows on the meter.

Integrating Display Rules with Stand Work

A driver free at a cross-harbour stand at night should simultaneously satisfy:

5.1 — waiting at a lawfully designated cross-harbour stand (or temporary signed arrangement).

5.2 — first two ready, flag up, roof TAXI lit in darkness, queue order for accepting hire.

5.3 — fare table (EN+ZH), registration mark , and identity plate (captions, name, photo, holder reg) all visible and legible .

5.3 refuse option — if the intending passenger’s trip is not cross-harbour via CHT / WHC / EHC , refusal at this stand type is allowed.

If the same passenger wanted a cross-harbour destination via one of those tunnels, the special refuse permission would not apply merely because the driver prefers another tunnel or a different job.

Why Passenger-Facing Displays Matter

Fare tables reduce disputes about “what the scale should be.” Registration and identity plates support accountability — lost property returns, TDOP/complaint processes, and passenger confidence. Cross-harbour stand rules keep tunnel queues functional so vehicles waiting for harbour work are not forced into short local hires that empty the stand of cross-harbour supply.

Exam Focus List

Duty applies when standing or plying for hire .

Three visibles: fare table (EN+ZH) , registration mark , identity plate .

Fare table and plate/holder: Commissioner design/position (and size for the plate system).

Captions: TAXI DRIVER IDENTITY PLATE / 的士司機證 .

Name as on ID (EN+Chinese where appropriate) + photo ; holder shows taxi registration .

Cross-harbour stand: may refuse non-cross-harbour hires; cross-harbour via CHT, WHC, or EHC .

Chapter 5 Close

Across this chapter you should now be able to answer: where to stop (type-correct stand or lawful hail; Transport permanent vs Police ≤72 h temporary), how to queue and signal free/hired status (first two ready, move up, flag and night roof light, recording cycle, hire-time start), and what passengers must see plus when cross-harbour stand refusal is allowed. Master those clusters and Part A stand / for-hire items become structured recalls instead of vague “driver etiquette” guesses.