Study guide

3.1 Taximeter Approval & Construction

Hong Kong Taxi and Ride-hailing Vehicle Combined Written Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Snapshot

1.1 Purpose, Owner & Why the Test Exists 1.2 Eligibility & Disqualifying Convictions 1.3 Application, Fees & 2026 Test Status

2 Format, Centre & After the Test

2.1 Format, Timing & Dual Pass Marks 2.2 Centre, Languages, Documents & Exam Rules 2.3 Results, Retake, Licence & Pre-service Course

3 Taximeter & Fare Receipts

3.1 Taximeter Approval & Construction 3.2 Positions, Testing, Seals & Offences 3.3 Receipt Printing Device

4 JRS, Signs & Vehicle Markings

4.1 Journey Recording Systems (JRS) 4.2 Illuminated Roof Signs & Body Markings 4.3 Capacity Plates & General Taxi Appearance

5 Stands, Pick-up & For-Hire Duties

5.1 Pick-up, Set-down & Taxi Stands 5.2 For-Hire Status & Stand Queue Order 5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

6 Fares, Vehicle Hire & Fleet Regime

6.1 Fare Scales: Urban, NT & Lantau 6.2 Extra Charges & Tunnel / Toll Rules 6.3 Vehicle Hiring Documents & Taxi Fleet Regime

7 Passengers, Property & Driver Conduct

7.1 Goods & Baggage Rules 7.2 Animals, Lost Property & Seat Belts 7.3 Core Obligations: Accept Hire, Route & Passengers 7.4 Change, E-payment & General Conduct

8 Taxi-Driver-Offence Points

8.1 TDOP Offences & Point Values 8.2 Advice Notices & Taxi Service Improvement Course 8.3 Disqualification & Two-tier Penalties

9 Locations: Hospitals & Tourist Spots

9.1 Hospitals — Hong Kong Island & Kowloon 9.2 Hospitals — New Territories, Lantau & Private 9.3 Tourist Spots, Museums & Performance Venues

10 Locations: Hotels & Government

10.1 Major Hotels by District 10.2 Government Offices & District Police Stations 10.3 Courts, LegCo & Major Public Buildings

11 Commercial, Residential, Education & Routes

11.1 Commercial Buildings & Shopping Malls 11.2 Residential Landmarks 11.3 Higher Education Institutions 11.4 Route Planning Method

12 RUC: Fitness, Speed & Lanes

12.1 Fitness, Safety Checks, Seat Belts & Child Safety 12.2 Speed Limits & Stopping Distance 12.3 Overtaking, White Lines & Lane Discipline

13 RUC: Junctions & Vulnerable Users

13.1 Junctions, Roundabouts & Priority 13.2 Pedestrians, Cyclists & Other Road Users 13.3 Zebra & Green Man Crossings

14 RUC: Signs, Lights & Markings

14.1 Signs Giving Orders & Warnings 14.2 Traffic Lights & Lane / Tunnel Signals 14.3 Road Markings: Orders, Warning & Information 14.4 Stopping & Parking Restrictions

15 RUC: Weather, Emergencies & Professional Driving

15.1 Weather, Night Driving & Road Works 15.2 Emergencies, Breakdowns & Accidents 15.3 Professional / Commercial Driver Duties 15.4 Tunnels, Expressways & Control Areas

16 RUC: Other Road Users & the Language of Signals

16.1 Pedestrian Rules & the Road Crossing Code 16.2 Passengers, Public Transport & Taxi Operating Areas 16.3 Motor Cycles & Motor Tricycles 16.4 Signals, Arm Signals & Authorised Persons

3.1 Taximeter Approval & Construction

Key Takeaways Explain This Topic AI

Every Hong Kong taxi must carry a taximeter of a design and construction approved by the Commissioner for Transport — not the Police, EMSD, or the vehicle owner.

No taximeter or similar fare instrument may be fitted without prior Commissioner approval.

The indicator ("flag") must measure at least 100 mm × 50 mm and display FOR HIRE or TAXI when the taxi is available.

Fare figures on the dial must be at least 10 mm high, show dollars and cents clearly, and be illuminable in darkness or when the hirer requires light.

"Should not be sealed for ease of repairs" is NOT a construction requirement — the taximeter may be sealed to the Commissioner's satisfaction.

Last updated: August 2026

3.1 Taximeter Approval & Construction

Quick Answer: Every taxi must be fitted with a taximeter of a design and construction approved by the Commissioner for Transport . The meter needs a visible FOR HIRE / TAXI flag (≥100 mm × 50 mm), clear dollar-and-cent fare figures (≥10 mm high), illumination when dark or requested, and construction that may be sealed to the Commissioner's satisfaction. Approval does not come from the Police, EMSD, or the owner.

The taximeter is the legal heart of taxi charging in Hong Kong. Part A of the Taxi Written Test draws heavily on the Taxi Operation Booklet rules about who may approve a meter, what it must show, and how it must be built. Treat this section as pure regulation: the exam tests exact authorities and measurements, not "what feels practical."

Who Approves the Taximeter?

Every taxi must be fitted with a taximeter of a design and construction approved by the Commissioner for Transport. That single sentence is one of the most reusable exam facts in this chapter.

Key implications:

The approving authority is the Commissioner for Transport (Transport Department leadership in regulatory terms). Sample-style questions often plant wrong authorities — Hong Kong Police Force, Electrical and Mechanical Services Department (EMSD), Customs, or "the registered owner." Those are traps.

No taximeter or similar instrument may be fitted without prior approval . "Similar instrument" matters: anything that purports to measure or display fare by time, distance, or combination is covered. You cannot swap in an unapproved black-box app display and call it fine because it "works like a meter."

Approval is about design and construction of the device type, not a one-off handshake with the driver on the roadside. Later sections cover periodic testing and sealing of the specific unit after fitment.

When you see a multiple-choice item that asks who must approve the taximeter, lock onto Commissioner for Transport and eliminate operational agencies and private parties.

The Indicator ("Flag")

The taximeter includes an indicator , commonly called the flag . Construction and display rules for the flag are specific:

  • Flag requirement Rule
  • Minimum size At least 100 mm × 50 mm
  • Wording Displays FOR HIRE or TAXI
  • Purpose Signals that the taxi is available for hire when the actuating device is in the FOR HIRE position

Memorise the minimum dimensions as a pair: 100 by 50 millimetres . Exam writers love substituting 80 × 50, 100 × 40, or "approximately postcard size" as distractors. The words on the flag are not decorative branding — they are statutory hire status language.

In the next section you will learn when the flag must be visible outside (FOR HIRE) versus not visible (HIRED / STOPPED). Here, the construction point is simpler: the indicator must be large enough and worded correctly so road users can recognise a taxi that is free for hire.

Construction Requirements in Detail

Beyond approval and the flag, the Booklet sets a cluster of construction and display standards. Study them as a checklist.

Sealing

The taximeter may be sealed to the Commissioner's satisfaction . Sealing protects accuracy and deters tampering. A classic false statement on practice-style items is that the meter "should not be sealed for ease of repairs." That statement is wrong — ease of repair is not a legal design goal that overrides sealing. If an option claims sealing is optional for workshop convenience, treat it as a failing construction statement.

Fare dial clarity

The fare dial must show amounts clearly in dollars and cents . The dial (or associated display wording) uses the words FARE , EXTRAS , and H.K. Dollars / cents (or the abbreviated forms HK$ and c ). Hirers and enforcement officers must be able to read what is being charged as the main fare versus extras.

How the amount is built

The meter must be capable of showing an amount determined by:

  • time , or
  • distance , or

a combination of time and distance.

Additional fares must advance in progressive increments — successive steps, not a single lump that appears without intermediate structure. Progressive increment design matches Hong Kong's published fare scales (flagfall, then distance/time steps), which you study in the fares chapter.

Figure size and illumination

  • Display feature Minimum / rule
  • Figure height At least 10 mm
  • Illumination Dial must be illuminable in darkness or when the hirer requires light
  • Actuating position display Shows the operating position: FOR HIRE , HIRED , or STOPPED

Ten-millimetre figures are an easy numeric trap. Smaller "fine print" would defeat the passenger's right to see the fare. Illumination is not only a night-driving nicety: if the cabin is dark or the hirer asks for the dial to be lit, the system must allow that. Separately, the meter must make the actuating position itself readable — so everyone can tell whether the taxi is free, on hire, or stopped for fare settlement.

What Is NOT a Requirement

Exam items often reverse true rules into plausible-sounding nonsense. High-yield false claims include:

Sealing should be avoided so workshops can repair meters quickly — false (sealing to the Commissioner's satisfaction is part of the regime).

Approval may be granted by the Police or EMSD instead of the Commissioner — false .

An owner may fit any reliable digital meter without prior approval — false .

Flag size is left to manufacturer preference — false (≥100 mm × 50 mm).

Figures may be any legible size — false (≥10 mm height).

When a question asks which statement is not a requirement, hunt for the comfort-or-convenience clause that undercuts sealing, approval, or minimum dimensions.

Why Construction Rules Matter Operationally

These construction rules feed every later duty in this chapter. If the meter is not an approved type, nothing about testing intervals, seal integrity, or printed receipts sits on a lawful foundation. If figures are too small or the dial cannot be lit, the passenger cannot verify the fare. If the flag is undersized, the FOR HIRE signal fails its public function.

For the Written Test, prioritise:

Commissioner for Transport as approver.

No unapproved taximeter or similar instrument.

Flag ≥100 mm × 50 mm with FOR HIRE or TAXI .

Figures ≥10 mm , dollars/cents, FARE / EXTRAS / HK$ wording.

Sealing allowed / required to Commissioner's satisfaction — not "unsealed for repairs."

Illuminable dial and clear FOR HIRE / HIRED / STOPPED position display.

Master those six points and you will correctly answer the majority of pure construction questions before you even study actuating sequence and penalties.

Memory Hooks

Commissioner, not constable — Transport approves the meter type.

100 × 50 flag, 10 mm figures — two size numbers that often appear on the paper.

FARE + EXTRAS + HK$ — the dial speaks the legal language of charging.

Sealed is good; "unsealed for repairs" is a distractor.

Next, Section 3.2 turns construction into daily operation: the three actuating positions, the mandatory sequence, six-month testing, reporting duties, and the criminal penalties for non-compliance and tampering.