Study guide

3.2 Positions, Testing, Seals & Offences

Hong Kong Taxi and Ride-hailing Vehicle Combined Written Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Snapshot

1.1 Purpose, Owner & Why the Test Exists 1.2 Eligibility & Disqualifying Convictions 1.3 Application, Fees & 2026 Test Status

2 Format, Centre & After the Test

2.1 Format, Timing & Dual Pass Marks 2.2 Centre, Languages, Documents & Exam Rules 2.3 Results, Retake, Licence & Pre-service Course

3 Taximeter & Fare Receipts

3.1 Taximeter Approval & Construction 3.2 Positions, Testing, Seals & Offences 3.3 Receipt Printing Device

4 JRS, Signs & Vehicle Markings

4.1 Journey Recording Systems (JRS) 4.2 Illuminated Roof Signs & Body Markings 4.3 Capacity Plates & General Taxi Appearance

5 Stands, Pick-up & For-Hire Duties

5.1 Pick-up, Set-down & Taxi Stands 5.2 For-Hire Status & Stand Queue Order 5.3 In-cab Displays, Identity Plate & Cross-Harbour Stands

6 Fares, Vehicle Hire & Fleet Regime

6.1 Fare Scales: Urban, NT & Lantau 6.2 Extra Charges & Tunnel / Toll Rules 6.3 Vehicle Hiring Documents & Taxi Fleet Regime

7 Passengers, Property & Driver Conduct

7.1 Goods & Baggage Rules 7.2 Animals, Lost Property & Seat Belts 7.3 Core Obligations: Accept Hire, Route & Passengers 7.4 Change, E-payment & General Conduct

8 Taxi-Driver-Offence Points

8.1 TDOP Offences & Point Values 8.2 Advice Notices & Taxi Service Improvement Course 8.3 Disqualification & Two-tier Penalties

9 Locations: Hospitals & Tourist Spots

9.1 Hospitals — Hong Kong Island & Kowloon 9.2 Hospitals — New Territories, Lantau & Private 9.3 Tourist Spots, Museums & Performance Venues

10 Locations: Hotels & Government

10.1 Major Hotels by District 10.2 Government Offices & District Police Stations 10.3 Courts, LegCo & Major Public Buildings

11 Commercial, Residential, Education & Routes

11.1 Commercial Buildings & Shopping Malls 11.2 Residential Landmarks 11.3 Higher Education Institutions 11.4 Route Planning Method

12 RUC: Fitness, Speed & Lanes

12.1 Fitness, Safety Checks, Seat Belts & Child Safety 12.2 Speed Limits & Stopping Distance 12.3 Overtaking, White Lines & Lane Discipline

13 RUC: Junctions & Vulnerable Users

13.1 Junctions, Roundabouts & Priority 13.2 Pedestrians, Cyclists & Other Road Users 13.3 Zebra & Green Man Crossings

14 RUC: Signs, Lights & Markings

14.1 Signs Giving Orders & Warnings 14.2 Traffic Lights & Lane / Tunnel Signals 14.3 Road Markings: Orders, Warning & Information 14.4 Stopping & Parking Restrictions

15 RUC: Weather, Emergencies & Professional Driving

15.1 Weather, Night Driving & Road Works 15.2 Emergencies, Breakdowns & Accidents 15.3 Professional / Commercial Driver Duties 15.4 Tunnels, Expressways & Control Areas

16 RUC: Other Road Users & the Language of Signals

16.1 Pedestrian Rules & the Road Crossing Code 16.2 Passengers, Public Transport & Taxi Operating Areas 16.3 Motor Cycles & Motor Tricycles 16.4 Signals, Arm Signals & Authorised Persons

3.2 Positions, Testing, Seals & Offences

Key Takeaways Explain This Topic AI

The actuating device has three positions: FOR HIRE (not recording; flag visible 20 m ahead), HIRED (recording time/distance/combo; flag not visible outside), and STOPPED (distance only or mechanism not in motion; flag not visible outside).

Actuating sequence is FOR HIRE → HIRED directly; return to FOR HIRE only via STOPPED.

Taximeters must be tested by the Commissioner before fitment and at intervals of not more than 6 months; satisfactory units (with receipt printer OK) are stamped and sealed.

Owners must report removal/cessation of a taximeter within 24 hours and report faults or seal damage as soon as possible; owner and driver both ensure approval and seal condition.

Non-compliance can bring a fine of $10,000 and 6 months' imprisonment; defacing/altering a meter without lawful excuse escalates on subsequent conviction to $25,000 and 12 months.

Last updated: August 2026

3.2 Positions, Testing, Seals & Offences

Quick Answer: Use FOR HIRE when free (not recording; flag visible to a person 20 m in front), HIRED when on a paid journey (recording; flag not visible outside), and STOPPED when finishing (distance only or mechanism not moving; flag not visible). Go FOR HIRE → HIRED directly and return to FOR HIRE only via STOPPED . Meters are tested before fitment and at least every 6 months , then stamped and sealed. Owner and driver share compliance duties; breaches attract $10,000 / 6 months , with higher penalties for deliberate defacement on subsequent conviction.

Construction rules (Section 3.1) say what a lawful meter is. This section explains how the driver must use it, how often it must be tested and sealed , and what happens when people ignore those duties.

The Three Actuating Positions

The actuating device sets the taximeter into one of three legal positions. Learn each row of the table — exams mix visibility, recording mode, and sequence into multi-part traps.

  • Position Recording behaviour Flag visibility
  • FOR HIRE Not recording Flag visible to a person standing 20 m in front of the taxi
  • HIRED Recording time , distance , or a combination Flag not visible outside the taxi
  • STOPPED Recording distance only , or the mechanism is not in motion Flag not visible outside the taxi
  • FOR HIRE

When the taxi is available, the meter sits on FOR HIRE . It must not be recording fare. The flag must be visible from 20 metres ahead so intending hirers and enforcement can see the free status. If the flag is down or hidden while you claim to be free, you have broken the visibility rule for this position.

HIRED

At the start of hire, move the actuating device to HIRED . The meter then records according to the approved time/distance/combination logic. The flag must not be visible outside — the public should not read the vehicle as free while a passenger is on board and the meter is running.

STOPPED

STOPPED is the intermediate position used when the hire ends or when the mechanism should freeze time charging. In STOPPED, the meter either records distance only or the mechanism is not in motion . As with HIRED, the flag is not visible outside. STOPPED is also the mandatory bridge when returning to free status (see sequence below).

Mandatory Actuating Sequence

The Booklet fixes how you may move between positions:

From FOR HIRE you go directly to HIRED when the taxi is hired.

You return to FOR HIRE only via STOPPED — you do not jump straight from HIRED back to FOR HIRE.

Operational meaning:

Accept hire → HIRED (recording starts).

Journey complete / fare settlement → STOPPED .

Ready for the next passenger → FOR HIRE (after STOPPED).

Skipping STOPPED on the way back to free status is a sequence violation. On the exam, any option that says you may switch HIRED → FOR HIRE in one motion is wrong.

When Hire Begins — and Driver Duties at Start and End

Two linked timing rules appear alongside position control:

At the start of hire , the driver must move the flag (actuating device) to the recording position ( HIRED ).

After the hire , the driver must return the device to a non-recording position (via STOPPED , then FOR HIRE when free again).

Hiring time starts at the earlier of:

when the journey begins , or

when the taxi is first made available at the appointed time and place (for example, a pre-arranged pick-up where the passenger is late but the taxi has already arrived on time).

That "earlier of" rule stops gamesmanship about when the clock may start. If the taxi was available at the agreed appointment before wheels moved, hire time can already have started.

Testing, Stamping and Sealing

A taximeter must be tested by the Commissioner (or under the Commissioner's testing regime as described in the Booklet):

before fitment to the vehicle, and

thereafter at intervals of not more than 6 months .

If the test is satisfactory and the receipt printing device is also in order, the taximeter is stamped and sealed . The seal is not a decoration — it is evidence that the unit passed accuracy and integrity checks. Section 3.3 covers the printer itself; remember here that printer health is part of what allows stamping and sealing to complete.

Six months is a hard ceiling: "about twice a year when convenient" is not the legal standard. Intervals ≤ 6 months means you cannot stretch to seven or eight months between tests.

Owner Reporting Duties

The owner has explicit notification duties:

  • Event Reporting duty
  • Removal of the taximeter, or cessation of its use Report within 24 hours
  • Fault or damage affecting accuracy or the seal Report as soon as possible (ASAP)

Do not confuse the clocks. Removal/cessation has a fixed 24-hour outer bound. Accuracy or seal problems demand immediate attention — "ASAP," not "next weekly roster."

Owner and Driver: Shared Compliance

Both the owner and the driver must ensure:

  • the taximeter complies with the rules,
  • it remains of an approved type, and

the seal is in good condition .

This dual duty is deliberate. An owner cannot blame "the driver always checks" and walk away; a driver cannot claim "the owner never told me" if the seal is broken or the meter is unapproved. On the exam, answers that place the duty on only one party are usually incomplete.

  • Offences and Penalties
  • Failure to ensure compliance / approval / seal condition

If owner or driver fails those duties: fine of $10,000 and imprisonment for 6 months (the Booklet's stated maximum framing for this failure).

Defacing, damaging or altering the taximeter

Without lawful excuse, defacing, damaging, or altering a taximeter attracts escalating penalties:

  • Conviction Maximum penalty (Booklet)
  • First $10,000 fine and 6 months imprisonment
  • Subsequent $25,000 fine and 12 months imprisonment

"Without lawful excuse" excludes authorised testing, repair, or official work. Casual "adjustments," broken seals from neglect, or intentional tampering fall on the wrong side of the line.

Putting Operation Together

A lawful shift looks like this in miniature: