Study guide

6.1 HPE Alletra Storage MP B10000 & X10000: Features and Positioning

HPE ATP - Storage Solutions HPE0-J81

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation, Customer Requirements, HPE GreenLake & Portfolio

1.1 HPE0-J81 Exam Facts & the HPE ATP - Storage Solutions Certification Path 1.2 Assessing Storage Requirements, Workload Sizing & SLAs 1.3 HPE GreenLake Basics: Cloud Platform, Workspaces & Consumption Model 1.4 The HPE Storage Portfolio: Current Systems, Legacy Platforms & Positioning

2 Chapter 2: HPE Storage Tools, Reference Resources & Cloud Management

2.1 Assessment, Sizing & Configuration Tools: SAF, NinjaSTARS, Ninja Online & OCS 2.2 Compatibility & Reference Resources: SPOCK, QuickSpecs & HPE Support Center 2.3 Cloud Management & AIOps: Data Services Cloud Console, Data Ops Manager & HPE InfoSight

3 Chapter 3: Storage Topologies, Architectures & Implementation Models

3.1 Storage Topologies Compared: DAS, NAS, and SAN Architectures 3.2 Block, File, and Object Storage Implementations & Protocols 3.3 Converged, Hyperconverged (HCI) & Software-Defined Storage (SDS)

4 Chapter 4: Storage Fabrics, Connectivity & HPE GreenLake Services

4.1 SAN Fabric Design, Zoning & Multi-Protocol Storage Networking 4.2 Network Attached Storage Protocols, Shares & Permissions 4.3 HPE GreenLake Offerings for Storage and Data Protection

5 Chapter 5: HPE MSA Gen7 Storage: Hardware, Software & Data Protection

5.1 HPE MSA Gen7 Hardware: Models, Controllers, Drives & Expansion 5.2 HPE MSA Software: Virtual Storage, MSA-DP+, Automated Tiering & SSD Read Cache 5.3 HPE MSA Data Protection & Management: Snapshots, Volume Copy, Remote Snap & SMU v4

6 Chapter 6: HPE Alletra Storage MP B10000 & X10000

6.1 HPE Alletra Storage MP B10000 & X10000: Features and Positioning 6.2 HPE Alletra Storage MP Hardware: Controller Nodes, JBOFs, Switchless & Switched Systems 6.3 B10000 Resiliency & Data Services: All-Active Nodes, RAID 6, Data Reduction & Replication 6.4 Managing HPE Alletra Storage MP: Onboarding, Provisioning, Monitoring & Local Tools

7 Chapter 7: Data Protection Principles, Replication & Disaster Recovery

7.1 Fundamentals of Data Protection: RPO, RTO & Resiliency Architectures 7.2 Storage Snapshots, Clones & Replication Strategies 7.3 Disaster Recovery Planning, Business Continuity & Immutability

8 Chapter 8: HPE StoreOnce, Tape, GreenLake Backup and Recovery & Zerto

8.1 HPE StoreOnce Systems, Catalyst & Cloud Bank Storage 8.2 HPE Tape Solutions: LTO Technology, MSL Libraries & the Offline Air Gap 8.3 HPE GreenLake for Backup and Recovery: Architecture, Policies & Ransomware Protection 8.4 HPE Zerto Software: Continuous Data Protection, Disaster Recovery & Cyber Resilience

6.1 HPE Alletra Storage MP B10000 & X10000: Features and Positioning

Key Takeaways Explain This Topic AI

HPE Alletra Storage MP is a common, modular NVMe hardware platform; the B10000 runs block (and unified file) software and the X10000 runs object and file software.

HPE calls the B10000 the industry's first disaggregated, scale-out block storage with a 100% data availability guarantee, delivered at a midrange price point.

B10000 software (HPE Alletra Storage ArcusOS) is all-inclusive: snapshots, Remote Copy, Peer Persistence, QoS, Peer Motion, data reduction and cloud management; encryption needs a separate license.

HPE backs the B10000 with 100% availability, StoreMore (at least 4:1 savings), zero RTO/RPO, cyber resiliency and 30-day satisfaction guarantees.

The X10000 provides S3 object and NFSv4.1 file access, data intelligence for AI pipelines, and optional accelerator nodes for very fast backup and restore.

Last updated: October 2026

HPE Alletra Storage MP B10000 & X10000: Features

Quick Answer: HPE Alletra Storage MP ("MP" for multi-protocol) is one modular, disaggregated NVMe hardware platform with two main software systems. The B10000 is mission-critical block storage, now with unified file , all-active scale-out nodes and a 100% data availability guarantee . The X10000 is scale-out object and file storage with native S3, NFSv4.1 and built-in data intelligence for AI. Both are managed from Data Services Cloud Console on the HPE GreenLake cloud.

One platform, different software

Element B10000 X10000

Data services Block (FC, NVMe/FC, iSCSI, NVMe/TCP) and unified file (NFS, ArcusOS 10.5.0+) Object (S3 and S3a APIs) and file (native NFSv4.1 namespace)

Software HPE Alletra Storage ArcusOS HPE-developed, container-based software with Kubernetes orchestration

Scale 2 to 6 controller nodes; up to 16 JBOFs; about 5.9 PB raw 3 to 16 controller nodes; up to 16 JBOFs; about 23.6 PB raw

Protection RAID 6, distributed sparing Triple-parity erasure coding

Typical workloads Databases, virtualization, mixed mission-critical apps Data lakes, AI and analytics, backup targets, digital repositories

Both use the same building blocks: a 2U chassis that holds either controller nodes or 24 NVMe drives, with controllers and drive shelves connected over 100 Gb Ethernet. Section 6.2 covers the hardware.

  • HPE Alletra Storage MP B10000
  • What HPE says it is

HPE describes the B10000 as "mission-critical storage at midrange economics" and as the industry's first disaggregated, scale-out block storage with a 100% data availability guarantee. It was previously sold as HPE GreenLake for Block Storage built on HPE Alletra Storage MP. It brings the 3PAR and Primera lineage of all-active, multi-node block storage to the disaggregated Alletra Storage MP hardware.

Key features

Disaggregated scale-out: add controller nodes for performance or JBOF shelves for capacity, independently and without disruption.

All-active, multi-node design: every node serves I/O, with no single point of failure.

NVMe end to end: TLC or QLC NVMe SSDs, and NVMe/FC and NVMe/TCP host protocols alongside FC and iSCSI.

Unified block and file: NFS file services on the same system from ArcusOS 10.5.0.

AI-driven cloud operations: intent-based provisioning, fleet analytics and invisible, non-disruptive upgrades through DSCC.

Ransomware protection: real-time ransomware threat detection, automated response workflows, immutable snapshots for recovery, and SIEM/XDR alerting that identifies affected volumes.

Integrated backup: application-consistent backup of B10000 volumes to HPE StoreOnce through protection policies, without a separate backup application.

All-inclusive software (ArcusOS)

The B10000 software subscription includes, among others:

  • Feature Purpose
  • Virtual Copy Read/write, read-only and immutable snapshots
  • Remote Copy Synchronous and asynchronous replication, two- and three-data-center topologies
  • Peer Persistence Active-active storage metro cluster with transparent failover
  • Priority Optimization Quality of service
  • Virtual Domains Multitenancy on one array
  • Dynamic Optimization Non-disruptive changes to volume layout
  • Peer Motion and Online Import Data migration from HPE and competitor arrays
  • Thin provisioning, deduplication and compression Capacity efficiency
  • System Reporter Performance and capacity reporting
  • Management UI, CLI, Web Services API and DSCC Local and cloud management

Data-at-rest encryption is separate: it needs an encryption license and self-encrypting or FIPS-validated drives, and once enabled it cannot be disabled.

HPE guarantees for the B10000

Guarantee What it covers

100% Data Availability Guarantee Guaranteed data availability for mission-critical apps on the no-single-point-of-failure platform

  • StoreMore Guarantee Total savings of at least 4:1 for the workloads
  • Zero RTO/RPO Guarantee Business continuity for configurations that HPE qualifies

Cyber Resiliency Guarantee Access to an HPE Services expert within 30 minutes of reporting an outage caused by ransomware

30-day Satisfaction Guarantee HPE works with the customer if the system does not meet its specifications

HPE's Future-Ready program adds a free, non-disruptive controller refresh. Guarantee terms and qualifying conditions are in HPE's guarantee documents; read them before quoting a guarantee to a customer.

  • HPE Alletra Storage MP X10000
  • What HPE says it is

HPE describes the X10000 as a next-generation, software-defined, scale-out data system for object and file storage and data intelligence , designed for exabyte-scale capacity. Its data layer is a log-structured, key-value store that is extent-based and optimized for TLC and QLC flash. Protocol layers such as object sit on top of it, so each protocol is native rather than layered on another.

Key features

Native S3 and S3a APIs , tested with the AWS and MinIO S3 SDKs. Any host that can make HTTPS connections can use it.

Native NFSv4.1 file system alongside object storage.

RDMA for S3-compatible storage , which HPE says can boost performance by up to 2x, plus RDMA for file workloads and KV cache support for AI inference.

Data intelligence nodes that enrich data inline with metadata and vector embeddings for retrieval-augmented generation (RAG) and analytics.

Data protection accelerator nodes , based on HPE StoreOnce Gen5 technology, for very high backup and restore throughput. HPE quotes up to 60x data reduction, including deduplication, for data protection use cases.

Efficiency: inline data reduction and triple-parity erasure coding within one array.

Bucket-level replication between X10000 systems, including active/active.

100% data availability guarantee for object storage, which HPE describes as an industry first.

Typical uses

Active data lakes and analytics engines that read S3 (for example Spark or Kafka pipelines), AI training and inference data, digital repositories, and fast backup and recovery targets for Veeam, Commvault or Cohesity.

Positioning the B10000 and X10000

  • Requirement Choose
  • Block volumes for Oracle, SQL Server or VMware with a 100% availability guarantee B10000
  • Block plus NFS file on one system B10000 with unified file
  • S3 data lake for analytics or AI X10000
  • Very fast backup target with high data reduction X10000 with accelerator nodes, or StoreOnce
  • Scale-out file service based on VAST Data software HPE GreenLake for File Storage
  • Small budget, a few hosts MSA Gen7 instead
  • Common exam traps

X10000 as block storage: it is object and file; block is the B10000.

X10000 as VAST software: it is HPE-developed; VAST software is used by GreenLake for File Storage.

Encryption as included software: it requires its own license.

"Six nines" for the B10000: the B10000 carries a 100% data availability guarantee.

Loading diagram... HPE Alletra Storage MP: one platform, two systems