Study guide
5.2 HPE MSA Software: Virtual Storage, MSA-DP+, Automated Tiering & SSD Read Cache
HPE ATP - Storage Solutions HPE0-J81
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation, Customer Requirements, HPE GreenLake & Portfolio
1.1 HPE0-J81 Exam Facts & the HPE ATP - Storage Solutions Certification Path 1.2 Assessing Storage Requirements, Workload Sizing & SLAs 1.3 HPE GreenLake Basics: Cloud Platform, Workspaces & Consumption Model 1.4 The HPE Storage Portfolio: Current Systems, Legacy Platforms & Positioning
2 Chapter 2: HPE Storage Tools, Reference Resources & Cloud Management
2.1 Assessment, Sizing & Configuration Tools: SAF, NinjaSTARS, Ninja Online & OCS 2.2 Compatibility & Reference Resources: SPOCK, QuickSpecs & HPE Support Center 2.3 Cloud Management & AIOps: Data Services Cloud Console, Data Ops Manager & HPE InfoSight
3 Chapter 3: Storage Topologies, Architectures & Implementation Models
3.1 Storage Topologies Compared: DAS, NAS, and SAN Architectures 3.2 Block, File, and Object Storage Implementations & Protocols 3.3 Converged, Hyperconverged (HCI) & Software-Defined Storage (SDS)
4 Chapter 4: Storage Fabrics, Connectivity & HPE GreenLake Services
4.1 SAN Fabric Design, Zoning & Multi-Protocol Storage Networking 4.2 Network Attached Storage Protocols, Shares & Permissions 4.3 HPE GreenLake Offerings for Storage and Data Protection
5 Chapter 5: HPE MSA Gen7 Storage: Hardware, Software & Data Protection
5.1 HPE MSA Gen7 Hardware: Models, Controllers, Drives & Expansion 5.2 HPE MSA Software: Virtual Storage, MSA-DP+, Automated Tiering & SSD Read Cache 5.3 HPE MSA Data Protection & Management: Snapshots, Volume Copy, Remote Snap & SMU v4
6 Chapter 6: HPE Alletra Storage MP B10000 & X10000
6.1 HPE Alletra Storage MP B10000 & X10000: Features and Positioning 6.2 HPE Alletra Storage MP Hardware: Controller Nodes, JBOFs, Switchless & Switched Systems 6.3 B10000 Resiliency & Data Services: All-Active Nodes, RAID 6, Data Reduction & Replication 6.4 Managing HPE Alletra Storage MP: Onboarding, Provisioning, Monitoring & Local Tools
7 Chapter 7: Data Protection Principles, Replication & Disaster Recovery
7.1 Fundamentals of Data Protection: RPO, RTO & Resiliency Architectures 7.2 Storage Snapshots, Clones & Replication Strategies 7.3 Disaster Recovery Planning, Business Continuity & Immutability
8 Chapter 8: HPE StoreOnce, Tape, GreenLake Backup and Recovery & Zerto
8.1 HPE StoreOnce Systems, Catalyst & Cloud Bank Storage 8.2 HPE Tape Solutions: LTO Technology, MSL Libraries & the Offline Air Gap 8.3 HPE GreenLake for Backup and Recovery: Architecture, Policies & Ransomware Protection 8.4 HPE Zerto Software: Continuous Data Protection, Disaster Recovery & Cyber Resilience
5.2 HPE MSA Software: Virtual Storage, MSA-DP+, Automated Tiering & SSD Read Cache
Key Takeaways Explain This Topic AI
MSA virtual storage groups drives into disk groups, disk groups into up to two pools (each up to 4 PiB addressable), and pools into volumes of up to 128 TiB.
MSA-DP+ is an erasure-coding-based RAID level introduced with Gen6 that spreads data, parity and spare capacity across all drives, with default spare equal to the two largest drives.
Automated tiering moves 4 MB pages between the Performance (SSD), Standard (10K SAS) and Archive (7.2K midline SAS) tiers based on access patterns.
An Advanced Data Services license is needed to mix SSDs and HDDs in a system, except when the SSDs are used only as SSD read cache.
Volume tier affinity (QoS) biases a volume's pages toward the performance or archive tier without disabling automated tiering.
Last updated: October 2026
HPE MSA Software: Virtual Storage and Tiering
Quick Answer: MSA Gen7 uses virtual storage : drives form disk groups , disk groups join one of two pools (A or B, each owned by a controller), and volumes are thin-provisioned from a pool in 4 MB pages . The automated tiering engine moves hot pages to the Performance tier (SSD) and cold pages to the Standard (10K SAS) or Archive (7.2K midline) tier. Mixing SSDs and HDDs requires the Advanced Data Services (ADS) Suite , except when the SSDs serve only as SSD read cache .
The virtual storage hierarchy
Object Definition Key limits (Gen7 QuickSpecs)
Disk group A set of drives of one type in one protection level (RAID 1, 5, 6, 10 or MSA-DP+) Can span enclosures
Pool One or more disk groups; pool A is owned by controller A and pool B by controller B Up to 2 pools, each 4 PiB addressable
Volume Logical unit presented to hosts, built from 4 MB pages spread across the pool Up to 128 TiB; up to 512 volumes per system
Host Named set of initiators that volumes are mapped to Up to 512 hosts and 1,024 initiators
Because a volume's pages spread across every disk group in its pool, adding capacity also adds performance, and HPE states that data automatically reflows to balance utilization when a pool is expanded.
RAID levels and MSA-DP+
MSA Gen7 supports RAID 1, 5, 6 and 10 and MSA-DP+ for virtual disk groups. RAID 0 (NRAID) is allowed only for read cache.
MSA-DP+ is a RAID-based protection level introduced with the sixth-generation MSA. HPE describes it as using erasure coding to give better performance and availability and very fast rebuilds compared with traditional parity RAID:
Data, parity and spare capacity are distributed across every drive in the disk group. There are no idle dedicated spare drives.
The default target spare capacity equals the sum of the two largest drives , enough to restore full fault tolerance after losing any two drives.
After a failure, the rebuild writes to many drives in parallel, so it finishes much faster than rebuilding onto a single spare.
Drives in one MSA-DP+ group must be the same type . Capacities may differ, but HPE recommends that the largest drive be no more than twice the smallest.
A replacement drive inserted into the failed drive's slot joins the group automatically, and the group can be expanded incrementally.
- Protection Survives Spare model Typical use
- RAID 10 One drive per mirror pair Dedicated spares Write-heavy SSD or 10K tiers
- RAID 6 Any two drives Dedicated spares Large HDD disk groups
MSA-DP+ Any two drives, with fast distributed rebuild Distributed spare capacity Large disk groups, especially high-capacity HDDs
The three tiers
- Tier Media Purpose
- Performance SSD Hot data: database indexes, active VM blocks
- Standard Enterprise 10K SAS HDD Mainstream data
- Archive Midline 7.2K SAS HDD Cold data, file shares, backup copies
A tier is the set of disk groups of the same media class in a pool. A pool can contain one, two or all three tiers.
Automated tiering
MSA automated tiering (version 2.0 in Gen7) is sub-LUN : it moves individual 4 MB pages rather than whole volumes. The controllers track access to every page. Frequently accessed pages migrate up to the highest available tier, and pages that cool down migrate down. Movement is continuous and needs no scheduling.
The SMU I/O Workload view helps with sizing the SSD tier. It shows, over a 7-day timeline, what share of the I/O is served by what share of capacity. If 80% of I/O falls on a small slice of capacity, a modest SSD tier delivers most of the benefit.
Volume tier affinity
The QuickSpecs list Virtual Tier Affinity as the MSA quality-of-service feature. A volume's tier affinity can be:
No affinity (default): pages move purely on access patterns.
Performance: pages are biased toward the fastest tier, useful for a latency-sensitive database.
Archive: pages are biased toward the archive tier, useful for backup copies or rarely used data, so they do not compete for SSD space.
Affinity is a preference, not a pin. Tiering continues, and the tier capacity still limits what fits.
SSD read cache
SSD read cache is the low-cost alternative to an SSD performance tier:
One or two SSDs are added to a pool as a read cache disk group; RAID 0 is allowed because the cache holds only copies.
Frequently read data is copied to SSD. Writes go to the HDD disk groups, so losing a cache SSD loses no data.
The Gen7 array supports up to 8.34 TB (7.6 TiB) of read cache.
A pool uses either a performance tier or read cache, not both.
Licensing: what needs the Advanced Data Services Suite
The MSA Advanced Data Services (ADS) Suite is included with every MSA 2072 and optional on MSA 2070 models. It adds performance tiering , 512 snapshots and Volume Copy , and Remote Snap . HPE's rule is that an ADS license is required when HDDs and SSDs are mixed in the same system, except when SSDs are used only as read cache .
Pool A Pool B ADS license needed?
- HDDs HDDs or none No
- SSDs (flash pool) SSDs (flash pool) or none No
- HDDs with SSD read cache HDDs, or HDDs with SSD read cache, or none No
- SSDs (flash pool) HDDs Yes
- HDDs and SSDs (auto-tiering) Any Yes
Archive tiering between 10K and midline HDDs does not involve SSDs, so it does not trigger the license.
Thin provisioning and space reclamation
MSA virtual volumes are thin provisioned : pages are allocated only when data is written. HPE lists thin provisioning, space reclamation and thin rebuild as standard "thin technologies":
Space reclamation returns pages to the pool when hosts send SCSI UNMAP after deleting data.
Thin rebuild rebuilds only the allocated parts of a failed drive, shortening rebuilds on partly full disk groups.
Because pools can be overcommitted, monitor pool thresholds and alerts so the pool never runs out of space.
Host presentation
Volumes are mapped to hosts or host groups with a LUN number and access level. Present each volume through both controllers so ALUA multipathing can fail over. The MSA also supports the VMware VAAI primitives (hardware-assisted locking, copy offload and block zeroing) and LDAP authentication of administrators against Active Directory.
Common exam traps
Tiering versus read cache: tiering moves the only copy of data and needs ADS when SSDs and HDDs are mixed; read cache holds disposable copies and does not need ADS.
One acceleration method per pool: performance tier or read cache, not both.
MSA-DP+ spares: the spare capacity is distributed, not a separate spare drive.
Two pools maximum: one per controller.