Study guide

5.1 HPE MSA Gen7 Hardware: Models, Controllers, Drives & Expansion

HPE ATP - Storage Solutions HPE0-J81

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation, Customer Requirements, HPE GreenLake & Portfolio

1.1 HPE0-J81 Exam Facts & the HPE ATP - Storage Solutions Certification Path 1.2 Assessing Storage Requirements, Workload Sizing & SLAs 1.3 HPE GreenLake Basics: Cloud Platform, Workspaces & Consumption Model 1.4 The HPE Storage Portfolio: Current Systems, Legacy Platforms & Positioning

2 Chapter 2: HPE Storage Tools, Reference Resources & Cloud Management

2.1 Assessment, Sizing & Configuration Tools: SAF, NinjaSTARS, Ninja Online & OCS 2.2 Compatibility & Reference Resources: SPOCK, QuickSpecs & HPE Support Center 2.3 Cloud Management & AIOps: Data Services Cloud Console, Data Ops Manager & HPE InfoSight

3 Chapter 3: Storage Topologies, Architectures & Implementation Models

3.1 Storage Topologies Compared: DAS, NAS, and SAN Architectures 3.2 Block, File, and Object Storage Implementations & Protocols 3.3 Converged, Hyperconverged (HCI) & Software-Defined Storage (SDS)

4 Chapter 4: Storage Fabrics, Connectivity & HPE GreenLake Services

4.1 SAN Fabric Design, Zoning & Multi-Protocol Storage Networking 4.2 Network Attached Storage Protocols, Shares & Permissions 4.3 HPE GreenLake Offerings for Storage and Data Protection

5 Chapter 5: HPE MSA Gen7 Storage: Hardware, Software & Data Protection

5.1 HPE MSA Gen7 Hardware: Models, Controllers, Drives & Expansion 5.2 HPE MSA Software: Virtual Storage, MSA-DP+, Automated Tiering & SSD Read Cache 5.3 HPE MSA Data Protection & Management: Snapshots, Volume Copy, Remote Snap & SMU v4

6 Chapter 6: HPE Alletra Storage MP B10000 & X10000

6.1 HPE Alletra Storage MP B10000 & X10000: Features and Positioning 6.2 HPE Alletra Storage MP Hardware: Controller Nodes, JBOFs, Switchless & Switched Systems 6.3 B10000 Resiliency & Data Services: All-Active Nodes, RAID 6, Data Reduction & Replication 6.4 Managing HPE Alletra Storage MP: Onboarding, Provisioning, Monitoring & Local Tools

7 Chapter 7: Data Protection Principles, Replication & Disaster Recovery

7.1 Fundamentals of Data Protection: RPO, RTO & Resiliency Architectures 7.2 Storage Snapshots, Clones & Replication Strategies 7.3 Disaster Recovery Planning, Business Continuity & Immutability

8 Chapter 8: HPE StoreOnce, Tape, GreenLake Backup and Recovery & Zerto

8.1 HPE StoreOnce Systems, Catalyst & Cloud Bank Storage 8.2 HPE Tape Solutions: LTO Technology, MSL Libraries & the Offline Air Gap 8.3 HPE GreenLake for Backup and Recovery: Architecture, Policies & Ransomware Protection 8.4 HPE Zerto Software: Continuous Data Protection, Disaster Recovery & Cyber Resilience

5.1 HPE MSA Gen7 Hardware: Models, Controllers, Drives & Expansion

Key Takeaways Explain This Topic AI

HPE MSA Gen7, launched in December 2024, includes the MSA 2070, MSA 2070 Flash Bundles, MSA 2072 Hybrid-Flash and TAA-compliant MSA 2070 models.

Every MSA Gen7 array has two controllers with 4 host ports each (8 per array); single-controller configurations are not supported.

Host connectivity is 16Gb or 32Gb Fibre Channel, 10/25GbE or 10GBASE-T iSCSI, or 12Gb SAS, depending on the model.

An array scales to 9 expansion enclosures, 240 SFF or 120 LFF drives and 7.37 PB raw, with 48 GB of data cache plus system memory per array.

The MSA 2072 includes two 1.92 TB read-intensive SSDs and the Advanced Data Services license; self-encrypting drives are supported only on MSA 2070 models.

Last updated: October 2026

HPE MSA Gen7 Hardware

Quick Answer: The HPE MSA Gen7 is HPE's entry-level, dual-controller block array. The family is the MSA 2070 (LFF or SFF, every host protocol), MSA 2070 Flash Bundles (12 read-intensive SSDs included), the MSA 2072 Hybrid-Flash (SFF, two 1.92 TB SSDs and the Advanced Data Services license included) and TAA-compliant MSA 2070 models. Each array has two controllers and 8 host ports , supports 16/32Gb FC, 10/25GbE or 10GBASE-T iSCSI, or 12Gb SAS , and scales to 9 expansion enclosures and 7.37 PB raw .

Where the MSA fits

HPE positions the MSA as an affordable, simple shared-storage array for small and midsize businesses, remote offices and departmental clusters. HPE notes it has been the leading shared storage for HPE ProLiant servers for more than 25 years. The MSA is block-only, managed locally, and designed to be customer-installable, self-repairable and self-upgradable.

The Gen7 model family

Model Form factor Host interfaces What is included

MSA 2070 2U, 12 LFF or 24 SFF bays 16Gb FC, 32Gb FC, 10/25GbE iSCSI, 10GBASE-T iSCSI or 12Gb SAS Array only; Advanced Data Services (ADS) Suite optional

MSA 2070 Flash Bundle 2U SFF 16Gb FC, 32Gb FC or 10/25GbE iSCSI Twelve factory-integrated read-intensive SSDs (23 TB or 46 TB bundles)

MSA 2072 Hybrid-Flash 2U SFF 16Gb FC, 32Gb FC, 10/25GbE iSCSI, 10GBASE-T iSCSI or 12Gb SAS Two factory-integrated 1.92 TB read-intensive SSDs plus one ADS license

  • TAA-compliant MSA 2070 2U SFF FC, iSCSI or SAS Requires at least six factory-integrated drives
  • HPE Smart Choice bundles 2U SFF FC, iSCSI or SAS Preconfigured all-flash bundles with up to 92 TB raw included

The FC and 10/25GbE iSCSI models ship without transceivers (Smart Choice bundles excepted); you order four or eight SFPs. The 10GBASE-T and 12Gb SAS models do not need SFPs.

Controller architecture

  • Feature MSA Gen7 value
  • Controllers per array 2 (dual controllers are mandatory)
  • Host ports 4 per controller, 8 per array
  • Cache 48 GB of data (read/write) cache plus system memory per array
  • Read cache extension Up to 8.34 TB (7.6 TiB) of SSD read cache per array
  • RAID engine RAID offload ASIC and processor
  • Cache protection Battery-free backup with supercapacitors and a flash memory card
  • Expansion ports 12Gb SAS
  • Hot-plug parts Controllers, drives, fans, power supplies and I/O modules
  • Active-active by pool

The controllers run an active/active, dual-pool design. Pool A is owned by controller A and pool B by controller B, and both controllers serve I/O at the same time. The array can also be set up active/passive with a single pool. Hosts use multipathing with ALUA (Asymmetric Logical Unit Access): paths through the controller that owns a volume's pool are optimized, and paths through the partner controller are non-optimized. If a controller fails, its partner takes over its pool. HPE states that single-controller operation exists only in this failover state; you cannot buy a single-controller MSA Gen7.

Write cache protection

Writes are acknowledged once they are in cache and mirrored to the partner controller. If power fails, supercapacitors keep the controller running long enough to copy cache contents to a flash memory card . Because there are no batteries, there is no battery to monitor, age out or replace.

Drives and enclosures

  • Drive type Capacities in the Gen7 QuickSpecs
  • SFF SSD 1.92, 3.84 and 7.68 TB
  • LFF SSD 1.92 TB
  • SFF 10K SAS HDD 1.2, 1.8 and 2.4 TB
  • LFF 7.2K midline SAS HDD 8, 12, 16, 20 and 24 TB
  • Self-encrypting SSD (SED) SFF 1.92, 3.84, 15.36 and 30.72 TB; LFF 1.92 TB
  • Self-encrypting HDD (SED) SFF 2.4 TB; LFF 12 TB

SSDs give the highest performance, 10K SAS HDDs balance performance and cost, and 7.2K midline HDDs give the lowest cost per TB. Self-encrypting drives are supported only on MSA 2070 and TAA-compliant MSA 2070 models , not on Flash Bundles or the MSA 2072.

Expansion

Add 0 to 9 expansion enclosures: the 2U 12-drive LFF enclosure or the 2U 24-drive SFF enclosure. LFF and SFF enclosures can be mixed.

Each enclosure has two I/O modules and connects with mini-SAS HD cables to the array's expansion ports or to the previous enclosure.

Maximum drives: 240 SFF or 120 LFF .

Maximum raw capacity: 7.37 PB with all-SFF high-capacity SSDs, or 2.88 PB all-LFF (24 TB drives).

Drives and enclosures can be hot-added.

Performance

HPE's internal benchmarks for MSA Gen7 list 783,000 random read IOPS , 227,000 random write IOPS , 14.1 GB/s segmented sequential reads and 9.6 GB/s segmented sequential writes. HPE also states up to 2x the random IOPS and 30% more sequential bandwidth than Gen6. Real results depend on drives, RAID, hosts and workload, so size with HPE's tools rather than quoting peak numbers.

Gen7 compared with Gen6

  • Area Gen6 (MSA 1060, 2060, 2062) Gen7 (MSA 2070, 2072)
  • Launch 2020 December 2024
  • Random IOPS Baseline Up to 2x
  • Sequential bandwidth Baseline Up to 30% more
  • Fibre Channel 16Gb 16Gb and 32Gb
  • Online controller and drive firmware updates Not a Gen6 feature New in Gen7, through MSA Smart Components
  • Drive protection MSA-DP+ introduced MSA-DP+ continued

Gen6 and Gen7 share the same drive carriers, so HPE describes them as MSA Gen6/Gen7 carriers. Customers with Gen6 arrays remain supported, but a new design should specify Gen7.

Design example

A medical clinic has a three-host VMware cluster, about 60 TB of data and a modest budget. The architect proposes an MSA 2072 16Gb FC SFF array: the two included 1.92 TB SSDs and the ADS license enable a performance tier, 10K SAS drives hold active virtual machines, and an LFF expansion enclosure of 7.2K midline drives holds image archives. Two FC switches give each host one path to each controller. A later replica at a second clinic would use Remote Snap, licensed on both arrays (section 5.3).

Common exam traps

Single-controller MSA: not supported in Gen7.

SED on an MSA 2072: not supported; choose an MSA 2070.

"The MSA 2072 needs an extra license for tiering": the ADS license is included.

Expansion limit: 9 enclosures, not unlimited.

Loading diagram... HPE MSA Gen7 dual-controller architecture