Study guide
4.4 Preharvest, Restricted-Entry, and Reentry Intervals
Iowa Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Certification Categories, Specialty Routes & 2026 Rule Changes 1.3 The Private Applicator Route
2 Iowa Laws & Regulations
2.1 Iowa Code Chapter 206 & IDALS Authority 2.2 Certification Categories and Licensing 2.3 Restricted-Use Pesticides and RUP Regulations 2.4 Record-Keeping Requirements 2.5 Recertification, Renewal, and Penalties 2.6 FIFRA and the Federal Framework (40 CFR 171) 2.7 Supervising Noncertified Applicators & Certified Handlers 2.8 Urban Application Notification Requirements 2.9 Iowa Product-Specific Use Restrictions 2.10 RUP Dealer Transactions, Sales Reporting & Use Recommendations
3 Pesticide Safety & PPE
3.1 Toxicity, Signal Words, and Exposure Routes 3.2 Personal Protective Equipment (PPE) 3.3 Worker Protection Standard (WPS) 3.4 Poisoning Symptoms and Emergency Response 3.5 Safe Handling and Storage 3.6 Transporting Pesticides Safely 3.7 Professionalism, Chemical Security & Stewardship
4 Label Compliance
4.1 Anatomy of a Pesticide Label 4.2 Signal Words, RUP Designation, and Precautionary Statements 4.3 Mixing and Application per Label Instructions 4.4 Preharvest, Restricted-Entry, and Reentry Intervals 4.5 Pesticide Formulations and Dilution
5 Environmental Protection
5.1 Groundwater and Surface Water Protection 5.2 Drift Management 5.3 Endangered Species and Pollinator Protection 5.4 Storage and Disposal of Pesticides and Containers 5.5 Spill Response and Environmental Hazards
6 Application Methods, Calibration & IPM
6.1 Application Equipment and Nozzle Selection 6.2 Calibration Calculations 6.3 Mixing, Loading, and Application-Rate Math 6.4 IPM Principles and Common Pest Recognition 6.5 Resistance Management 6.6 Timing and Methods of Application 6.7 Types of Pesticides and How They Work
7 Exam Readiness & Next Steps
7.1 Test-Taking Strategy and Practice Approach 7.2 Recertification Planning and Continuing Education
4.4 Preharvest, Restricted-Entry, and Reentry Intervals
Key Takeaways Explain This Topic AI
PHI (Preharvest Interval) protects consumers and livestock by ensuring residues fall below the tolerance before harvest; REI (Restricted-Entry Interval) protects workers by limiting entry into treated areas.
When tank-mixing products with different PHIs or REIs, always follow the longest interval.
Under WPS, the limited-contact/irrigation early-entry exception allows no more than 8 hours in any 24-hour period, with no hand labor and early-entry PPE.
Double notification (posted signs plus oral warning) removes the limited-contact/irrigation exception.
Plant-back (rotational crop) intervals govern when a different crop may be planted after application and are distinct from PHI and REI.
Last updated: August 2026
Two Intervals, Two Purposes
PHI and REI are both label-driven waiting periods, but they protect different things and apply to different people. Confusing them is a common Iowa exam error.
Interval What it controls Who it protects Starts at Ends when
PHI (Preharvest Interval) Residue levels at harvest Consumers, livestock Last application Crop may be harvested or grazed
REI (Restricted-Entry Interval) Worker entry into treated area Workers, handlers End of application Workers may re-enter with no special restrictions
A field can be past its REI (workers may enter freely) but still inside its PHI (the crop cannot yet be harvested), or the reverse. Always check both numbers.
Preharvest Interval (PHI)
The Preharvest Interval (PHI) is the minimum number of days between the last pesticide application and harvest of the crop. It is set so residues fall below the tolerance (the maximum legal residue level, established by EPA under FIFRA Section 408). Harvesting before the PHI expires risks an illegal residue violation, crop condemnation, and a label-violation citation.
'Harvest' includes direct-combining, cutting (swathing), and — for forage crops — grazing. For animal feed crops, labels use separate terms:
Pregrazing Interval (PGI) : days between application and allowing livestock to graze.
Feeding restrictions : days before cutting hay, silage, or straw, or before feeding treated forage.
Example: a label might say 'Do not graze or feed green forage for 14 days after application. Do not harvest for hay for 30 days.' Each is a separate restriction that must be met.
When Tank-Mixing, Use the Longest PHI
If you apply a tank mix of two products with different PHIs, you must wait the longest PHI among them before harvest. The same rule applies to REIs. A shorter PHI does not override a longer one.
Restricted-Entry Interval (REI)
The Restricted-Entry Interval (REI) is the time after a pesticide application during which entry into the treated area is restricted under EPA's Worker Protection Standard (WPS, 40 CFR Part 170) . The REI appears on the label in the Agricultural Use Requirements box. During the REI:
Workers may not enter the treated area for hand-labor tasks.
Only exempt entries are allowed (see below).
Posted warning signs or oral notification may be required.
Typical REIs are 12, 24, or 48 hours, but some products carry longer REIs (for example, 5 days for certain organophosphates with dermal toxicity concerns). The REI is set based on the product's acute dermal and inhalation toxicity.
REI vs. Signal Word
A common misconception is that the signal word sets the REI. It does not. The REI is determined by the product's acute dermal and inhalation toxicity and by EPA's WPS rules. A CAUTION product can carry a 48-hour REI; a WARNING product can carry a 12-hour REI. Read the label's Agricultural Use Requirements box for the actual REI.
Early-Entry Exceptions Under WPS
The WPS allows a few narrow exceptions for entering during an REI. Iowa agricultural employers must meet all conditions of any exception they use.
No-Contact Exception
A worker may enter if they will have no contact with anything treated (soil, water, air, plant surfaces) and any inhalation exposure level on the label has been reached. No special PPE is required.
Short-Term Activities Exception
No hand labor.
No more than 1 hour in any 24-hour period.
No entry during the first 4 hours after application, and until any inhalation criterion is met.
Early-entry PPE from the label must be provided and worn.
Limited-Contact / Irrigation Tasks Exception
No hand labor.
No more than 8 hours in any 24-hour period.
No entry during the first 4 hours after application, and until any inhalation criterion is met.
Contact is minimal (feet, lower legs, hands, forearms).
The need for entry could not have been foreseen, and delay would cause significant economic loss.
Does not apply to products whose labeling requires double notification (both posted signs and oral warning).
Early-entry PPE must be provided and worn.
Agricultural Emergency Exception
A state, tribal, or federal agency must declare an agricultural emergency. Hand labor is permitted, and there is no time limit, but all PPE, training, and decontamination requirements of the short-term exception apply.
Double Notification
Some labels require double notification — both a posted warning sign at the entrance to the treated area and an oral warning to each worker — before and during the REI. A label that requires double notification does not allow the limited-contact/irrigation exception. The label's Agricultural Use Requirements box states whether notification is oral, posted, or both.
Plant-Back (Rotational Crop) Intervals
A plant-back interval (also called a rotational crop interval ) is the minimum time that must pass after a pesticide application before a different crop can be planted in the same field. Planting too soon can injure the rotational crop or cause illegal residues in it.
Example: a label may say 'Do not plant rotational crops for 4 months after application. Corn, soybeans, and wheat may be planted 4 months after application; all other crops 18 months.' Plant-back intervals are distinct from PHI and REI — they govern what you can plant next, not when you can harvest or enter.
Putting It Together
Before any application, read the label for three waiting periods: the PHI (when you can harvest or graze), the REI (when workers can re-enter), and any plant-back interval (when you can rotate to the next crop). Note the longest interval when tank-mixing. For WPS-covered agricultural establishments, check the notification requirement and whether double notification removes the limited-contact exception. Meeting these intervals is part of using the product consistent with its labeling — and therefore part of complying with FIFRA and Iowa Code Chapter 206.