Study guide
11.2 Coordinate Geometry
ICAS Mathematics Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 ICAS Mathematics Format & Papers 1.2 Results, Percentiles & Award Levels 1.3 Preparation & Problem-Solving Strategies
2 Number & Arithmetic: Whole Numbers
2.1 Place Value & Whole Numbers 2.2 The Four Operations & Order of Operations 2.3 Factors, Multiples & Prime Numbers
3 Number & Arithmetic: Fractions, Decimals & Percentages
3.1 Fractions 3.2 Decimals & Recurring Decimals 3.3 Percentages & Financial Maths
4 Number & Arithmetic: Ratio, Integers & Indices
4.1 Ratio, Rates & Proportion 4.2 Integers & Directed Numbers 4.3 Indices & Index Laws
5 Algebra & Patterns: Patterns & Relationships
5.1 Number & Shape Patterns 5.2 Sequences & Function Rules 5.3 Number Sentences & Missing Values
6 Algebra & Patterns: Expressions & Equations
6.1 Simplifying & Expanding Expressions 6.2 Factorising Expressions 6.3 Solving Linear Equations
7 Algebra & Patterns: Graphs, Formulas & Advanced Equations
7.1 Substitution & Formulas 7.2 The Cartesian Plane & Linear Graphs 7.3 Advanced Equations, Inequalities & Simultaneous Equations
8 Measures & Units: Length, Area & Volume
8.1 Length & Perimeter 8.2 Area & Composite Shapes 8.3 Volume, Capacity & Surface Area
9 Measures & Units: Units, Time & Rates
9.1 Metric Units & Conversions 9.2 Mass, Time & Elapsed Time 9.3 Speed, Distance & Map Scale
10 Space & Geometry: Angles & Shapes
10.1 Angles & Parallel and Perpendicular Lines 10.2 Triangles, Quadrilaterals & Congruence 10.3 Three-Dimensional Objects & Nets
11 Space & Geometry: Transformations & Coordinates
11.1 Symmetry & Transformations 11.2 Coordinate Geometry 11.3 Pythagoras' Theorem & Trigonometry
12 Chance & Data: Statistics & Data Displays
12.1 Reading Tables & Graphs 12.2 Mean, Median, Mode & Range 12.3 Spread, Outliers & Statistical Displays
13 Chance & Data: Probability
13.1 Probability of Single Events 13.2 Compound Events: 'And', 'Or' & 'At Least' 13.3 Conditional Probability & Expected Frequency
11.2 Coordinate Geometry
Key Takeaways Explain This Topic AI
Coordinates are always written (x, y) — x first (across), then y (up or down); the signs of x and y tell you which of the four quadrants a point lies in
The midpoint of a segment is found by averaging the x-coordinates and averaging the y-coordinates of the endpoints
The distance between two points is the hypotenuse of a right-angled triangle: d equals the square root of (x2 − x1) squared plus (y2 − y1) squared
Gradient equals rise over run: (y2 − y1) divided by (x2 − x1); a positive gradient rises left to right, a negative gradient falls
For a parallelogram, the diagonals bisect each other, so opposite vertices share the same midpoint — the fastest way to find a missing fourth vertex
Last updated: July 2026
The cartesian plane is where geometry meets algebra, and ICAS tests it at every level from Paper D upwards. Younger papers ask you to read or plot a point; Papers E-F expect midpoints, distances and gradients; senior papers fold coordinates into transformation and trigonometry problems. The good news is that almost every coordinate question reduces to counting squares or applying one of three small formulas — none of which needs a calculator.
Plotting and Reading Points in All Four Quadrants
Every point is written as an ordered pair (x, y) : the x-coordinate first (movement across), then the y-coordinate (movement up or down). Remember it as "you walk along the corridor before you climb the stairs." The axes divide the plane into four quadrants , numbered anticlockwise starting from the top right.
- Quadrant x sign y sign Example point
- I (top right) + + (3, 2)
- II (top left) − + (−4, 1)
- III (bottom left) − − (−2, −5)
- IV (bottom right) + − (6, −3)
Points on an axis are in no quadrant: (0, 4) lies on the y-axis and (0, 0) is the origin. The classic ICAS trap is swapping the order — the point (2, 5) is 2 across and 5 up, not the other way round. Read the signs before you plot: a negative y means move DOWN from the x-axis.
Midpoint of a Segment
The midpoint of the segment joining (x₁, y₁) and (x₂, y₂) is found by averaging each coordinate:
M = ( (x₁ + x₂) / 2 , (y₁ + y₂) / 2 )
Worked example: find the midpoint of A(−3, 2) and B(5, 8). Average the x-coordinates: (−3 + 5)/2 = 1. Average the y-coordinates: (2 + 8)/2 = 5. The midpoint is (1, 5). Check on a sketch: it should sit exactly halfway between the two points. A reverse question asks for a missing endpoint: if M(1, 5) is the midpoint of A(−3, 2) and B, then B = (2×1 − (−3), 2×5 − 2) = (5, 8). Double the midpoint, subtract the known endpoint.
Distance Between Two Points
For a horizontal or vertical segment, just subtract: the distance from (2, 3) to (7, 3) is 7 − 2 = 5 units, and from (1, −2) to (1, 4) is 4 − (−2) = 6 units.
For a slanted segment, build a right-angled triangle and use Pythagoras (see section 11.3):
d = √( (x₂ − x₁)² + (y₂ − y₁)² )
Worked example: find the distance from P(1, 2) to Q(4, 6). Horizontal change: 4 − 1 = 3. Vertical change: 6 − 2 = 4. Distance = √(3² + 4²) = √(9 + 16) = √25 = 5 units. Recognising the 3-4-5 triple saves time — no calculator required.
Gradient
The gradient (slope) of a line measures its steepness:
gradient = rise / run = (y₂ − y₁) / (x₂ − x₁)
Worked example: the line through (1, 2) and (5, 10) has gradient (10 − 2)/(5 − 1) = 8/4 = 2. For every 1 unit across, the line rises 2 units. Four cases to know:
- Positive gradient: line rises left to right
- Negative gradient: line falls left to right, e.g. (2 − 8)/(5 − 1) = −6/4 = −3/2
- Zero gradient: horizontal line (y values equal)
- Undefined gradient: vertical line (x values equal, so you would divide by zero)
Subtract the coordinates in the SAME order for both points; mixing (y₂ − y₁) with (x₁ − x₂) flips the sign and is a very common error. Parallel lines have equal gradients — ICAS uses this fact often.
Using Coordinates to Describe Transformations
Coordinates make transformations precise. Rules worth knowing about the origin and axes:
- Reflect (a, b) in the x-axis → (a, −b)
- Reflect (a, b) in the y-axis → (−a, b)
- Reflect (a, b) in the line y = x → (b, a)
- Rotate (a, b) 90° clockwise about the origin → (b, −a)
- Rotate (a, b) 180° about the origin → (−a, −b)
- Translate by h right and k up → (a + h, b + k)
- Enlarge about the origin with scale factor k → (ka, kb)
Worked example: triangle with vertex (2, 3) is rotated 90° clockwise about the origin. The image is (3, −2). Check: the point moved from Quadrant I to Quadrant IV, which is exactly where a quarter-turn clockwise takes it.
Coordinate Problems Involving Shapes
The signature ICAS problem: "Three vertices of a parallelogram are (1, 1), (6, 1) and (7, 4). Find the fourth vertex." In a parallelogram the diagonals bisect each other , so opposite vertices share a midpoint. Label the points A(1, 1), B(6, 1), C(7, 4) and the unknown D. Since AB is horizontal with length 5, the side DC must also be horizontal with length 5: D = (7 − 5, 4) = (2, 4). Verify with the midpoint rule: midpoint of diagonal AC is ((1+7)/2, (1+4)/2) = (4, 2.5); midpoint of BD is ((6+2)/2, (1+4)/2) = (4, 2.5). They match, so D(2, 4) is correct.
Strategy summary for shape questions:
Sketch the points first — a rough grid drawing exposes wrong answers immediately.
Use horizontal/vertical counting before reaching for formulas.
Use equal gradients to check parallel sides, and the midpoint rule for parallelograms.
Estimate: if your calculated vertex lands in the wrong quadrant, recheck your signs.