Study guide

12.2 Play Areas and Amusement Rides

ICC Accessibility Inspector / Plans Examiner 21

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: General Administrative and Scoping Provisions

1.1 Occupancy Group Accessibility and IBC Chapter 11 Scoping 1.2 General Administration: Definitions, Conventions, and Code Editions 1.3 Existing Buildings: IEBC Section 306 Alterations, Additions, and Changes of Occupancy 1.4 Technical Infeasibility, Existing-Building Ramps, and Historic Structures

2 Chapter 2: Building Blocks (ICC A117.1 Chapter 3)

2.1 Walking and Floor Surfaces, Openings, and Level Changes 2.2 Turning Space and Clear Floor Space: New Versus Existing Buildings 2.3 Knee and Toe Clearances 2.4 Unobstructed and Obstructed Reach Ranges 2.5 Protruding Objects and Vertical Clearance

3 Chapter 3: Accessible Routes — Route Scoping, Entrances, and Doors

3.1 Accessible Route Scoping, Components, Slopes, and Clear Width 3.2 Accessible Entrances: Number, Location, and Power-Operated Doors 3.3 Doors, Doorways, and Gates: Clear Width and Maneuvering Clearances 3.4 Door Hardware, Forces, Closing Speed, Door Surfaces, and Windows

4 Chapter 4: Accessible Routes — Ramps, Curb Ramps, and Conveyance

4.1 Ramps: Slopes, Landings, and Clearances 4.2 Ramp Handrails, Edge Protection, and Cross Slopes 4.3 Curb Ramps, Blended Transitions, and Detectable Warnings at Crossings 4.4 Elevators, LULA Elevators, and Platform Lifts

5 Chapter 5: Accessible Means of Egress

5.1 Accessible Means of Egress: Number, Components, Elevators, and Stairways 5.2 Elevators, Platform Lifts, Areas of Refuge, and Exterior Areas for Assisted Rescue 5.3 Two-Way Communication, Egress Signage, and Instructions

6 Chapter 6: General Site and Building Elements

6.1 Accessible Parking: Scoping, Van Spaces, Dimensions, and Signs 6.2 Passenger Loading Zones, Bus Stops, and Rail Platforms 6.3 Site Accessibility: Site Routes, Routes Through Parking, EV Charging, and Fuel Dispensers 6.4 Stairways: Treads, Risers, Nosings, Visual Contrast, and Lighting 6.5 Stair Handrails: Location, Height, Profile, Continuity, and Extensions

7 Chapter 7: Plumbing Elements and Facilities

7.1 Water Closets and Toilet Compartments 7.2 Grab Bars: Locations, Cross Sections, Spacing, Strength, and Assisted Toileting 7.3 Toilet Rooms, Lavatories, Sinks, Mirrors, Urinals, and Accessories 7.4 Bathtubs, Shower Compartments, and Seats 7.5 Plumbing Scoping: Family Rooms, Adult Changing Stations, Drinking Fountains, Laundry, and Saunas

8 Chapter 8: Communication Elements and Features

8.1 Visible Alarms and Assistive Listening Systems 8.2 Accessible Signage: Visual Characters, Raised Characters, Braille, Pictograms, and Symbols 8.3 Telephones, ATMs and Fare Machines, Two-Way Communication Systems, and Detectable Warnings

9 Chapter 9: Special Rooms and Spaces

9.1 Assembly Areas: Wheelchair Spaces, Companion Seats, Dispersion, and Lines of Sight 9.2 Dressing and Locker Rooms, Courtrooms, Detention Cells, Self-Storage, and Classroom Acoustics 9.3 Kitchens and Kitchenettes

10 Chapter 10: Built-in Furnishings and Equipment

10.1 Dining Surfaces and Work Surfaces 10.2 Sales and Service Counters and Windows 10.3 Check-Out Aisles, Food Service Lines, Benches, Storage, Charging Stations, and Gaming

11 Chapter 11: Dwelling and Sleeping Units

11.1 Scoping Accessible, Type A, and Type B Units (IBC 1108) 11.2 Type A Units (A117.1 Section 1103) 11.3 Type B Units (A117.1 Section 1104) 11.4 Accessible Units: Hotels, Dormitories, Health Care and Residential Care (A117.1 Section 1102) 11.5 Type C (Visitable) Units and Units with Communication Features

12 Chapter 12: Recreational Facilities

12.1 Swimming Pools, Wading Pools, Hot Tubs, and Spas 12.2 Play Areas and Amusement Rides 12.3 Sports Facilities, Exercise Equipment, Golf, Boating, Fishing, and Shooting Facilities

12.2 Play Areas and Amusement Rides

Key Takeaways Explain This Topic AI

At least 50 percent of elevated play components must be on an accessible route, and Table 1008.3.2.1.2 sets how many ground level components and types must be on an accessible route when elevated components are provided.

Ground level play area routes are 60 inches wide (44 inches in play areas under 1,000 square feet with turning spaces), and elevated routes are 36 inches wide.

Play area ramps are 1:16 maximum at ground level and rise 12 inches maximum between elevated components, with handrails 20 to 28 inches high and 0.95 to 1.55 inches in diameter.

Transfer platforms are 14 x 24 inches and 11 to 18 inches high, transfer steps rise 8 inches maximum, and entry points and seats are 11 to 24 inches above the clear floor space.

Each fixed-course amusement ride provides at least one wheelchair space, transfer seat or transfer device; the ride floor aligns within plus or minus 5/8 inch and 3 inches of gap at load.

Last updated: October 2026

  • 12.2 Play Areas and Amusement Rides
  • Play Areas
  • Scoping

IBC 1111.4.13: play areas containing play components designed and constructed for children are located on an accessible route. A117.1 1008 then sets what inside the play area must be accessible. Section 1008.3 applies to play areas for children 2 years and older ; separate play areas for different age groups each comply. Exceptions include family child care play areas in the proprietor's residence, relocations of components to create safe use zones without extending the surface, amusement attractions, and altered components where the surface is not altered.

Play Components (1008.3.2)

Ground level components: where provided, at least one of each type is on an accessible route.

Elevated components: where provided, at least 50 percent are on an accessible route.

When elevated components are provided, additional ground level components are required by Table 1008.3.2.1.2 (unless at least 50 percent of the elevated components are connected by a ramp and at least 3 of those are different types):

  • Elevated components provided Ground level components on an accessible route Different types
  • 1 Not applicable Not applicable
  • 2 to 4 1 1
  • 5 to 7 2 2
  • 8 to 10 3 3
  • 11 to 13 4 3
  • 14 to 16 5 3
  • 17 to 19 6 3
  • 20 to 22 7 4
  • 23 to 25 8 4
  • 26 and over 8, plus 1 for each additional 3 over 25 5

Ground level components provided to meet the one-of-each-type rule may count toward the table if the type count is satisfied, and they are dispersed and integrated.

Soft contained play structures (1008.2.2): with three or fewer entry points, one is on an accessible route; with four or more, two.

Routes Within Play Areas (1008.4.1)

  • Item Requirement
  • Vertical clearance 80 in. over routes serving ground level components

Ground level width 60 in. ; 44 in. in play areas under 1,000 sq ft if a turning space is provided where the narrower route exceeds 30 ft; 36 in. for 60 in. maximum lengths separated by 60 x 60 in. segments

Elevated width 36 in. ; 32 in. for 24 in. separated by 48 in. segments; transfer systems 24 in.

  • Ground level ramps Running slope 1:16 maximum
  • Elevated ramps Rise 12 in. maximum per run

Ramp handrails Not required within ground level use zones; no extensions required; circular gripping surfaces 0.95 to 1.55 in. ; top 20 to 28 in. above the ramp

Surfaces Stable, firm, slip resistant and regularly maintained; within use zones, comply with ASTM F1292 impact attenuation

Transfer systems may replace ramps for up to 25 percent of elevated components where 20 or more elevated components are provided, and for any number where fewer than 20 are provided.

Transfer Systems and Components (1008.4.2 and 1008.4.3)

Item Requirement

Transfer platform Level, 14 in. deep x 24 in. wide, top 11 to 18 in. high, with a transfer space (305) centered on the 24-in. side and a means of support

  • Transfer steps 14 x 24 in., 8 in. maximum high, with support
  • Turning space At least one on the same level as play components; next to swings where swings are provided
  • Clear floor space At each play component

Play tables Knee clearance 24 in. high, 17 in. deep and 30 in. wide; rims 31 in. maximum (no knee clearance with a parallel approach for ages 5 and under)

Entry points and seats 11 to 24 in. above the clear floor space (slide entries exempt), with a transfer support

  • Amusement Rides
  • Scoping (IBC 1111.4.8)

Rides that move people through a fixed course within a defined area comply; mobile or portable rides are exempt. Load and unload areas are accessible and on an accessible route (one position on the route where there are several). At the load position, the wheelchair space position, transfer seats and transfer devices are on an accessible route. Each ride provides at least one wheelchair space, ride seat designed for transfer, or transfer device , except rides controlled or operated by the rider, rides designed primarily for children who are assisted by an adult, and rides without built-in or mechanically fastened seats. IBC 1112.4 requires signs at queue entries identifying the type of access provided.

Technical Criteria (A117.1 1002)

Item Requirement

Routes Chapter 4; in load areas and on rides, ramps up to 1:8 and non-505 handrails where 405.2 or 505 compliance is not structurally or operationally feasible

  • Load and unload areas A turning space
  • Wheelchair space size 30 in. wide x 48 in. long, measured 9 in. above the floor

Floor alignment At load, vertical difference within plus or minus 5/8 in. and horizontal gap 3 in. maximum (or ramps and bridge plates per 36 CFR 1192.83(c))

Ride entry 32 in. clear

Protrusions in the space Up to 6 in. along the front between 9 and 27 in. high; up to 25 in. above 27 in.

Companion seats Where the ride is wider than 53 in. , seats more than one rider and the wheelchair need not be centered

Transfer seats and devices 14 to 24 in. above the load area surface, with a clear floor space and a wheelchair storage space (305) in or near the unload area