Study guide

3.2 Wage, Hour, and Safety Laws (FLSA, OSHA)

ICC Certified Building Official CBO

Track your progress as you read

Finished sections get a check mark.

1 Introduction

About the ICC CBO Exam How to Use This Guide

2 Chapter 1: Legislative and Alternative Methods

1.1 Code Adoption and Local Amendments 1.2 Board of Appeals and Alternative Materials/Methods

3 Chapter 2: Code Enforcement and Due Process

2.1 Permits and Construction Documents 2.2 Inspection Process and Certificate of Occupancy 2.3 Notices, Violations, and Stop Work Orders 2.4 Right of Entry and Administrative Warrants 2.5 Due Process and Equal Protection 2.6 Hazard Abatement and Emergency Measures 2.7 Tort Liability and Sovereign Immunity 2.8 Code Enforcement Prosecution and Civil Remedies

4 Chapter 3: Human Resources in Code Administration

3.1 Anti-Discrimination Laws in Public Employment (ADA, Title VII) 3.2 Wage, Hour, and Safety Laws (FLSA, OSHA) 3.3 Personnel Discipline, Performance, and Dismissal 3.4 Labor Relations, Grievances, and Due Process

5 Chapter 4: Reports and Public Records

4.1 Records Management and Document Retention 4.2 Public Records Disclosure and Freedom of Information Laws

6 Chapter 5: Customer Service and Public Relations

5.1 Customer Service Principles in Public Administration 5.2 Public Relations, Media, and Stakeholder Communication 5.3 Interagency Cooperation and Coordination 5.4 Conflict De-escalation and Dispute Resolution 5.5 Feedback Strategy and Continuous Service Improvement

7 Chapter 6: Personnel Administration

6.1 Job Descriptions and Personnel Needs Assessment 6.2 Recruitment, Selection, and Onboarding Processes 6.3 Staff Training, Professional Goals, and Certification 6.4 Performance Appraisals and Supervision Standards

8 Chapter 7: Financial Management

7.1 Operating and Capital Budget Development 7.2 Fee Structures, Valuation, and Revenue Generation 7.3 Financial Controls, Audits, and Cost Recovery

9 Chapter 8: Department Records and Information Systems

8.1 Permitting and Code Enforcement Reporting Systems 8.2 Electronic Document Review and Workflow Integration 8.3 Information Security, Data Privacy, and Disaster Recovery

10 Chapter 9: Architectural Plan Review

9.1 Use and Occupancy Classifications (IBC Chapter 3) 9.2 Construction Types and Height/Area Limitations (IBC Chapters 5 & 6) 9.3 Fire and Smoke Protection Features (IBC Chapters 7 & 8) 9.4 Fire Protection Systems (IBC Chapter 9) 9.5 Means of Egress and Occupant Load (IBC Chapter 10)

11 Chapter 10: Structural Plan Review

10.1 Design Loads and Structural Criteria (IBC Chapter 16) 10.2 Materials Standards and Foundations (IBC Chapters 18-23)

12 Chapter 11: Building Systems and Energy Code Plan Review

11.1 Mechanical (IMC) and Fuel Gas (IFGC) Plan Review 11.2 Plumbing Systems (IPC) and Backflow Protection 11.3 Electrical (NEC/NFPA 70) and Energy (IECC) Code Plan Review

13 Chapter 12: Field Inspection and Construction Compliance

12.1 Accessibility Standards and ANSI A117.1 Compliance 12.2 Soil Conditions, Excavation, and Site Inspections 12.3 Footing and Foundation Inspections 12.4 Concrete, Masonry, Steel, and Wood Structural Inspections 12.5 Rough-in MEP Inspections 12.6 Special Inspections and Quality Assurance (IBC Chapter 17) 12.7 Existing Buildings, Alterations (IEBC), and Final Inspections

3.2 Wage, Hour, and Safety Laws (FLSA, OSHA)

Key Takeaways Explain This Topic AI

The Fair Labor Standards Act (FLSA) governs minimum wage, overtime, and classifications for public and private sector employees.

Most building inspectors and code enforcement officers are classified as non-exempt because their primary duties do not involve policy-making or broad administrative discretion.

Public agencies may offer compensatory time (comp time) in lieu of cash overtime at a rate of 1.5 hours per hour worked, capped at 240 hours for code staff.

Travel between the office and inspection sites or between inspection sites is compensable, whereas normal home-to-work travel is not.

Under OSHA or state-plan programs, building departments must provide necessary personal protective equipment (PPE) and maintain safe conditions in excavations and elevated spaces.

Last updated: July 2026

Wage, Hour, and Safety Laws in Code Administration

Operating a municipal code administration department requires adherence to federal and state labor standards governing compensation and workplace safety. The Certified Building Official (CBO) must manage the operational budget and staff scheduling in compliance with the Fair Labor Standards Act (FLSA) while maintaining a comprehensive safety program under the Occupational Safety and Health Act (OSHA) or equivalent state plans. Violations of these statutes can lead to severe financial penalties, employee grievances, and personal injury liability.

The Fair Labor Standards Act (FLSA)

The FLSA establishes minimum wage, overtime pay, recordkeeping, and youth employment standards affecting employees in the private sector and in federal, state, and local governments. A primary administrative duty of the CBO is to ensure that all positions within the department are correctly classified as either exempt or non-exempt.

Exempt vs. Non-Exempt Classifications

To be classified as exempt from overtime pay, an employee must satisfy three tests: the salary level test, the salary basis test, and the primary duty test.

Salary Level & Basis: The employee must be paid a predetermined, fixed salary that meets the statutory minimum, regardless of the quality or quantity of work performed.

Primary Duty: The employee's principal responsibility must involve executive, administrative, or professional duties.

Executive Exemption: Applies to supervisors, such as the CBO, assistant building officials, or inspection supervisors, who manage at least two full-time employees and have input into hiring, firing, and promotions.

Administrative Exemption: Applies to employees performing office or non-manual work directly related to management or general business operations, and whose primary duties include the exercise of discretion and independent judgment on matters of significance.

Professional Exemption: Applies to roles requiring advanced knowledge in a field of science or learning acquired by a prolonged course of specialized intellectual instruction, such as licensed structural engineers or architects.

In a building department, building, electrical, plumbing, and code enforcement inspectors are typically non-exempt . Although inspectors make technical decisions based on code compliance, their work constitutes routine enforcement of established standards rather than independent policy-making. Thus, they must be paid overtime at a rate of one and one-half times their regular rate for all hours worked over 40 in a workweek.

Public Sector Overtime and Compensatory Time

Under Section 7(o) of the FLSA, public agencies may offer compensatory time off (comp time) instead of cash overtime, provided there is a pre-existing agreement with the employees or their union.

Comp time must be accrued at the same rate as overtime: 1.5 hours of comp time for every 1 hour of overtime worked.

For non-public-safety personnel (including inspectors and administrative clerks), employees may accrue a maximum of 240 hours of comp time. Beyond this limit, the agency must pay cash overtime.

Upon termination, unused comp time must be paid at the employee's final rate.

Compensable Travel Time

Building inspectors travel extensively, and compensability is governed by the Portal-to-Portal Act:

Home-to-Work Travel: Normal daily commuting to the office or first inspection site is not compensable.

Workday Travel: Travel between the office and inspection sites, or between different sites during the day, is compensable.

One-Day Out-of-Town Assignment: Travel to and from an out-of-town training seminar is compensable, minus the normal daily commute time.

The Occupational Safety and Health Act (OSHA)

While federal OSHA does not directly cover state and local government employees, Section 18 of the OSH Act allows states to develop and operate their own occupational safety and health programs. In the approximately 28 states and territories with OSHA-approved State Plans, public sector employees—including municipal building inspectors—must be provided safety protections that are "at least as effective as" federal standards. In states without State Plans, municipalities are governed by state-specific public employee safety laws.

Inspector Field Safety and Hazards

Building inspectors are exposed to active construction hazards daily. Under the General Duty Clause , the employer must furnish a place of employment free from recognized hazards that cause or are likely to cause death or serious physical harm. Specific field hazards and compliance mandates include:

Personal Protective Equipment (PPE): The department must provide and enforce the use of PPE, including ANSI-approved hardhats, safety glasses, high-visibility class 2 or 3 vests, and steel-toed boots.

Fall Protection: Under 29 CFR 1926 Subpart M, inspectors must utilize appropriate fall protection systems (such as harnesses and lifelines) when inspecting roofs, open shafts, or elevated structures where a fall hazard of 6 feet or more exists.

Trenching and Excavation: Under Subpart P, inspectors must never enter an un-shored trench or excavation deeper than 5 feet that lacks an engineering protective system (such as trench boxes, shoring, or proper sloping).

Hazard Communication & Confined Spaces: Inspectors must be trained in recognizing hazardous atmospheres (such as sewer gases, mold, or carbon monoxide) and must not enter permit-required confined spaces without proper testing equipment and training.

Lock-Out/Tag-Out (LOTO): When performing electrical inspections, safety protocols must be followed to ensure equipment is de-energized before examination.

Administrative Responsibilities of the CBO

The CBO is responsible for implementing the department’s safety program. This includes conducting annual safety audits, organizing regular safety meetings ("tailgate meetings"), investigating all field accidents, and maintaining log forms (such as OSHA Form 300) to record occupational injuries and illnesses.