Study guide

1.1 ICC P3 Exam Overview: Format, References & Content Weights

ICC Plumbing Plans Examiner P3

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview, Administration & Plan Review Workflow

1.1 ICC P3 Exam Overview: Format, References & Content Weights 1.2 Scope, Intent, and Administrative Authority 1.3 Construction Documents & Submittal Requirements 1.4 Inspections, Testing Protocols & Department Operations

2 Chapter 2: General Regulations, Materials & Pipe Protection

2.1 Piping Protection, Trenching & Bedding 2.2 Approved Piping Materials, Joints & Connections 2.3 Piping Hangers, Supports & Thermal Expansion

3 Chapter 3: Plumbing Fixtures, Occupant Load & Minimum Fixture Counts

3.1 Occupant Load Calculation & IPC Table 403.1 3.2 Separate Facilities, Urinal Substitution & Exceptions 3.3 Public Toilet Facilities & Customer Access Requirements 3.4 Multi-User, Single-User & Family/Assisted-Use Facilities

4 Chapter 4: Accessible Plumbing Facilities & Fixture Standards

4.1 ICC A117.1 Clearances & Accessible Fixture Dimensions 4.2 Accessible Showers, Bathtubs & Drinking Fountains 4.3 Fixture Construction, Flow Rates & Water Conservation

5 Chapter 5: Water Heaters, Fuel Gas Piping & Venting

5.1 Water Heater Design, Location & Clearances 5.2 Temperature & Pressure Relief Valves & Discharge Piping 5.3 Safety Controls, Drain Pans & Thermal Expansion 5.4 Fuel Gas Pipe Sizing: Demand, Tables & Length Methods (IFGC 402) 5.5 Gas Water Heater Venting & Combustion Air Calculations (IFGC 304 & 503) 5.6 Gas Piping Materials, Installation, Testing & Appliance Connections (IFGC 403–411, 624)

6 Chapter 6: Water Supply, Backflow Protection & Nonpotable Systems

6.1 Water Supply Fixture Units (WSFU) & Demand Estimation 6.2 Water Service & Distribution Pipe Sizing Calculations 6.3 Maximum Velocities, Water Hammer & Pressure Regulators 6.4 Backflow Prevention & Cross-Connection Control 6.5 Nonpotable Water Systems: Identification, Separation & Storage Tanks 6.6 Graywater Reuse, Rainwater Collection, Reclaimed Water & Subsurface Graywater

7 Chapter 7: Sanitary Drainage System Design & Sizing

7.1 Drainage Principles, Minimum Slope & Flow Velocities 7.2 Drainage Fixture Units (DFU) & System Load Assignment 7.3 Horizontal Branch & Building Drain/Sewer Sizing 7.4 Soil & Waste Stacks, Offsets & Multi-Story Systems

8 Chapter 8: Sanitary Cleanouts, Sumps & Sewage Ejectors

8.1 Cleanout Sizing, Spacing & Installation Requirements 8.2 Backwater Valves & Flood Protection 8.3 Sewage Ejectors, Sumps & Macerating Systems

9 Chapter 9: Venting Systems & Vent Sizing

9.1 Venting Fundamentals, Terminations & Flood Rim Rules 9.2 Fixture Vents, Individual & Common Vents, Trap-to-Vent Distances 9.3 Wet Venting, Circuit Venting & Combination Waste-Vent Systems 9.4 Vent Stacks, Stack Vents & Air Admittance Valves

10 Chapter 10: Traps, Interceptors & Special Waste Systems

10.1 Fixture Traps, Trap Seals & Design Requirements 10.2 Grease Interceptors: Sizing, Types & Plan Review 10.3 Oil Separators, Sand Interceptors & Indirect / Chemical Waste

11 Chapter 11: Storm Drainage Systems & Roof Drainage Design

11.1 Storm Drainage Hydraulics & 100-Year Rainfall Rates 11.2 Sizing Vertical Conductors, Leaders & Horizontal Storm Drains 11.3 Secondary (Emergency) Roof Drainage & Subsoil Systems

12 Chapter 12: Health Care Plumbing Systems

12.1 Health Care Plumbing Scope, Fixtures & Special Equipment 12.2 Health Care Water Supply Protection, Water Services & Medical Gas

1.1 ICC P3 Exam Overview: Format, References & Content Weights

Key Takeaways Explain This Topic AI

The ICC Plumbing Plans Examiner (P3) exam has 60 questions with a 2.5-hour time limit, per the ICC exam catalog.

The P3 exam is open book, and the 2024 edition references the 2024 IPC, the 2024 IFGC and ICC A117.1-2017.

ICC lets candidates bring copyrighted bound books to the P3 exam, but not study guides, presentations or practice questions.

Water Supply is the largest P3 domain at 19 percent, followed by Fixtures and Vents at 15 percent each.

ICC national certification exams, including P3, require a scaled score of 75 to pass.

Last updated: October 2026

ICC P3 Exam Overview: Format, References & Content Weights

The ICC Plumbing Plans Examiner (exam ID P3) is a national certification from the International Code Council. In ICC's description, the plumbing plans examiner reviews drawings, specifications and other documents from the design professional for compliance with the adopted codes, and answers code questions from designers and the public. The exam tests whether you can find and apply code text quickly , not whether you have memorized it.

Exam Format at a Glance

  • Item Detail (ICC exam catalog, checked October 2026)
  • Exam ID P3, General Plans Examiner category, national certification
  • Questions 60 multiple-choice questions
  • Time limit 2.5 hours (150 minutes), or about 2.5 minutes per question
  • Book policy Open book
  • Delivery PRONTO (Proctored Remote Online Testing Option), taken in person or online with a remote proctor
  • Listed fee $320 for PRONTO
  • Passing standard Scaled score of 75 , the standard for ICC national certification exams
  • Score report Passing candidates see only "PASS"; failing candidates receive their numeric scaled score

Code years: ICC lists the P3 exam for both the 2024 and 2021 code years. Choose the year your jurisdiction or employer requires, and study the matching books. This guide follows the 2024 editions , which renumbered many IPC sections. For example, the urinal substitution rule moved to IPC 424.2, water closet rules to 425, and the vent methods to 910 through 916.

Approved References (2024 Code Year)

2024 International Plumbing Code (IPC). It includes Resource A , plumbing provisions excerpted from ICC A117.1-2017.

2024 International Fuel Gas Code (IFGC).

ICC A117.1-2017, Accessible and Usable Buildings and Facilities .

The 2021 code year uses the 2021 IPC and 2021 IFGC with ICC A117.1-2017. ICC provides digital access to one or more listed references during the exam at no extra cost.

What You May Bring

According to the catalog, you may bring copyrighted, bound books , including the approved references. Training materials such as presentations, study guides and practice questions are not permitted. All questions are based only on the approved references, and only those references can support a question appeal. Check the current ICC candidate bulletin for rules on tabs and highlighting before you mark up your books.

Content Domains and Weights

  • Domain Weight ≈ Questions Subtopics (Weight) Guide Coverage
  • General Requirements 5% 3 Piping protection (2%); piping installation (3%) Chapters 1–2

Fixtures 15% 9 Fixtures and materials (2%); installation of fixtures (5%); installation of accessible fixtures (3%); inspection of accessible fixtures (5%) Chapters 3–4

Water Heaters 10% 6 Safety devices (3%); piping, combustion air and venting, including fuel gas sizing (7%) Chapter 5

Water Supply 19% 11 Materials (3%); supply piping installation (6%); protection of water supply, including water treatment (5%); nonpotable systems (5%) Chapter 6

Sanitary Drainage 13% 8 Materials (3%); sizing drains and stacks (4%); sumps, ejectors, backwater valves and cleanouts (3%); indirect waste (3%) Chapters 7–8, Section 10.3

  • Vents 15% 9 Materials, joints and grades (5%); sizing and installation (10%) Chapter 9
  • Traps 11% 7 Traps, interceptors and separators (7%); chemical treatment and neutralization (4%) Chapter 10
  • Storm 7% 4 Roof drains, conductors and leaders (4%); sumps and subdrains (3%) Chapter 11
  • Health Care Plumbing 5% 3 Installation of fixtures (2%); protection of water supply (3%) Chapter 12

Question counts are the weights applied to 60 questions and rounded; ICC does not publish exact counts per domain.

Takeaways from the weights:

Water Supply (19%) is the largest domain. It includes nonpotable water (IPC Chapter 13) and water treatment , which are easy to skip.

Fixtures (15%) puts 8 percent on accessible fixtures, so ICC A117.1 clearances, grab bars and heights matter.

The 7 percent Water Heaters subtopic covers IFGC fuel gas pipe sizing, combustion air and venting , so bring the IFGC and practice the Table 402.4 sizing tables.

Vents (15%) places 10 percent on sizing and installation, including the trap-to-vent distances, wet vents, circuit vents and vent stack tables.

Working an Open-Book Exam in 150 Minutes

With about 2.5 minutes per question, you cannot read a chapter to answer one question. Successful candidates:

Know where things are. Learn the IPC chapter layout: Chapter 3 general regulations, 4 fixtures, 5 water heaters, 6 water supply, 7 drainage, 8 indirect waste, 9 vents, 10 traps and interceptors, 11 storm, 12 medical gas, 13 nonpotable water and 14 subsurface graywater. Appendix E covers water pipe sizing.

Use the index. Look up keywords such as "cleanout," "vacuum breaker" or "scupper" instead of paging through chapters.

Memorize the tables you use most. Table 403.1 (fixture counts), Table 709.1 (DFUs), Tables 710.1(1) and 710.1(2) (drain sizing), Table 909.1 (trap-to-vent distances), Table 1106.2 (storm piping) and IFGC Table 402.4(1) appear repeatedly.

Make two passes. Answer the questions you know first, flag the calculation-heavy ones, and return to them with the time left.

Watch the edition. Questions follow the code year you registered for. A section number from a 2018 or 2021 study aid may point to a different rule in the 2024 code.

How to Use This Guide

Each section ends with a plans examiner checklist and practice questions that cite the 2024 section numbers. Work through the chapters in outline order, and tab the matching code sections in your own books as you go.