Study guide

1.3 Blueprint Domains and Weighting

ICC B1 Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ICC B1 Orientation and Exam Strategy

1.1 Current ICC B1 Exam Facts 1.2 Eligibility, Application, and Scheduling 1.3 Blueprint Domains and Weighting 1.4 Open-Book IRC Navigation Strategy 1.5 Study Calendar and Practice Plan

2 Chapter 2: Code Administration

2.1 Code Administration Overview 2.2 Core Workflows and Decision Points 2.3 Scenario Practice for Code Administration 2.4 Common Traps in Code Administration 2.5 Practice Drills and Readiness Markers

3 Chapter 3: Building Planning

3.1 Building Planning Overview 3.2 Core Workflows and Decision Points 3.3 Scenario Practice for Building Planning 3.4 Common Traps in Building Planning 3.5 Practice Drills and Readiness Markers

4 Chapter 4: Footings and Foundations

4.1 Footings and Foundations Overview 4.2 Core Workflows and Decision Points 4.3 Scenario Practice for Footings and Foundations 4.4 Common Traps in Footings and Foundations 4.5 Practice Drills and Readiness Markers

5 Chapter 5: Floor Construction

5.1 Floor Construction Overview 5.2 Core Workflows and Decision Points 5.3 Scenario Practice for Floor Construction 5.4 Common Traps in Floor Construction 5.5 Practice Drills and Readiness Markers

6 Chapter 6: Wall Construction and Coverings

6.1 Wall Construction and Coverings Overview 6.2 Core Workflows and Decision Points 6.3 Scenario Practice for Wall Construction and Coverings 6.4 Common Traps in Wall Construction and Coverings 6.5 Practice Drills and Readiness Markers

7 Chapter 7: Roof/Ceiling Construction and Penetrations

7.1 Roof/Ceiling Construction and Penetrations Overview 7.2 Core Workflows and Decision Points 7.3 Scenario Practice for Roof/Ceiling Construction and Penetrations 7.4 Common Traps in Roof/Ceiling Construction and Penetrations 7.5 Practice Drills and Readiness Markers

8 Chapter 8: Public Safety

8.1 Public Safety Overview 8.2 Core Workflows and Decision Points 8.3 Scenario Practice for Public Safety 8.4 Common Traps in Public Safety 8.5 Practice Drills and Readiness Markers

9 Chapter 9: Final Review and Test Day

9.1 Timed Practice Strategy 9.2 Last-Week Review Map 9.3 Exam-Day Checklist 9.4 After the Exam and Next Steps

1.3 Blueprint Domains and Weighting

Key Takeaways Explain This Topic AI

The official B1 content outline has 7 major domains; Wall Construction and Coverings is the largest at 27% of the exam.

Public Safety and Special Construction (17%) and Footings and Foundations (16%) are the next two heaviest domains.

Floor Construction and Roof/Ceiling Construction each carry 14%; Building Planning is 8% and Code Administration is 4%.

Study time should follow domain weight first, then be adjusted upward for your personal weak areas revealed by practice.

Each domain maps to specific IRC chapters, so knowing the weights tells you which chapters to tab and drill most.

Last updated: June 2026

The Official Content Outline

The ICC publishes an exam content outline that lists every domain item writers may test and the percentage weight of each. The outline is the exam map: it does not reveal live questions, but it defines exactly where your 60 questions come from. Because the exam is scored as a whole, the weights translate almost directly into question counts — a 27% domain contributes roughly 16 of 60 questions, while a 4% domain contributes only about 2 to 3.

The 7 major domains and their official weights are:

  • # Domain Weight ~Questions Primary IRC chapters
  • 01 Code Administration 4% ~2-3 Ch. 1
  • 02 Building Planning 8% ~5 Ch. 3
  • 03 Footings and Foundations 16% ~10 Ch. 4
  • 04 Floor Construction 14% ~8 Ch. 5
  • 05 Wall Construction and Coverings 27% ~16 Ch. 6, 7
  • 06 Roof/Ceiling Construction 14% ~8 Ch. 8, 9, 10
  • 07 Public Safety and Special Construction 17% ~10 Ch. 3 (egress), R311, R312, R314/315, safety glazing

Note a correction worth flagging: some secondary study summaries list Footings and Foundations at 18% and label domain 07 'Public Safety' only. The official ICC outline weights Footings at 16% and titles domain 07 'Public Safety and Special Construction' at 17% . Use the official figures.

Inside the Heavy Domains

Wall Construction and Coverings (27%) is the exam's center of gravity and breaks into many sub-tasks: lumber quality for walls (4%), wood framing of walls (4%), header spans (2%), steel framing (2%), fireblocking (2%), masonry materials and placement (2%), concrete wall inspection (2%), braced wall panels (2%), interior coverings (2%), exterior sheathing/veneers/weather-resistant coverings (3%), and exterior plaster/stucco/lath (2%). This domain alone can decide a pass. If you master nothing else deeply, master Chapter 6 framing rules, the fastening schedule, header spans, and braced wall panels.

Public Safety and Special Construction (17%) covers means of egress (4%), exit stairways and ramps (3%), exterior construction such as decks and porches (3%), smoke detectors (2%), flame spread of insulation and finishes (2%), and safety glazing (3%). These are life-safety provisions and a favorite of item writers because the numbers are crisp and testable — egress opening dimensions, stair riser/tread, guard heights, and hazardous safety-glazing locations.

Footings and Foundations (16%) spans footings (5%), stepped footings and special foundations (3%), columns and piers (3%), and site preparation, foundation, and basement walls (5%). Expect questions on frost-depth footings, footing sizing tables, anchor bolts, dampproofing/waterproofing, and unbalanced backfill limits.

A Practical Allocation Rule

Start from the weights. Give Wall, Public Safety, and Footings the most calendar time — together they are 60% of the exam.

Then adjust for misses. If a low-weight domain like Code Administration produces repeated errors, fix it; easy points lost in a 4% domain can still sit right on the pass line.

Tab by chapter, not by topic. Because domains map to IRC chapters, your physical tabs should mirror the chapter structure so a domain cue jumps you to the right place.

Turning the Blueprint Into a Tracker

A blueprint is only useful if it drives action. Build a one-page domain tracker and, for each of the 7 domains, score yourself on four readiness levels:

Understand — I know what the domain covers and which IRC chapter owns it.

Locate — I can find the governing section/table in the code in under a minute.

Apply — I can read the requirement and decide compliance in a timed scenario.

Discriminate — I can explain why each distractor is wrong, not just pick the right answer.

A domain is exam-ready only when you reach level 4. Most candidates plateau at level 1 (familiarity) and mistake it for mastery — they recognize the topic but cannot find or apply the rule fast enough. The tracker forces honesty.

Worked Allocation Example

Suppose you have 100 study hours. A weight-driven baseline might be: Wall ~27 hrs, Public Safety ~17 hrs, Footings ~16 hrs, Floor ~14 hrs, Roof/Ceiling ~14 hrs, Building Planning ~8 hrs, Code Administration ~4 hrs. After your first diagnostic practice set, shift perhaps 10-15 hours toward whichever domains you bombed, even if they are low-weight, because the marginal point is equally valuable wherever it comes from.

Common Trap

Do not over-invest in Code Administration (4%) because it feels orderly and quotable. It is the smallest domain. The points live in the framing, foundation, and life-safety chapters — that is where the questions are, and that is where careful IRC navigation pays off most.

Reading the Sub-Task Weights

The official outline breaks each domain into numbered sub-tasks, and each carries its own small percentage. This granularity tells you which parts of a chapter item writers emphasize. For example, within Footings and Foundations, Footings (5%) and Site Preparation/Foundation/Basement Walls (5%) are weighted higher than Stepped Footings (3%) or Columns and Piers (3%) — so a frost-depth footing or a foundation-wall question is more likely than a stepped-footing question.

Domain Highest-weight sub-tasks Lower-weight sub-tasks

Wall Construction (27%) Lumber quality 4%, Wood framing 4%, Exterior sheathing/veneers 3% Header spans, steel framing, fireblocking, masonry, braced panels, interior coverings, stucco (2% each)

Public Safety (17%) Means of egress 4%, Safety glazing 3%, Exit stairs/ramps 3%, Exterior construction 3% Smoke detectors 2%, Flame spread 2%

Footings/Foundations (16%) Footings 5%, Site prep/foundation/basement walls 5% Stepped footings 3%, Columns/piers 3%

Roof/Ceiling (14%) Roof framing 4% Insulation/vapor 2%, attics 2%, sheathing 2%, coverings 2%, fireplaces/chimneys 2%

The lesson: even inside a domain, lead with the higher-weighted sub-tasks . In Roof/Ceiling, rafter and truss framing (4%) outweighs any single covering or ventilation sub-task, so a span-table question is the most probable single item in that domain.

Map Weights to Chapters Before You Drill

The final move in this section is to connect each domain to its IRC chapter so your study and your tabs align. Building Planning and most Public Safety provisions live in Chapter 3; Footings in Chapter 4; Floors in Chapter 5; Walls in Chapters 6-7; Roof/Ceiling in Chapters 8-10; and energy provisions in Chapter 11. When you sit down to study a domain, you should already know which chapter to open — that linkage is the bridge from the blueprint to the open-book navigation skill covered next.