Study guide
2.3 Coinsurance and the Coinsurance Formula
Idaho Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Idaho Property & Casualty Insurance Exam Overview
Idaho Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Idaho P&C Insurance Regulation & Licensing
1.1 Idaho Department of Insurance 1.2 Idaho P&C Producer Licensing Requirements 1.3 Continuing Education and License Maintenance
22 Chapter 2: Idaho Property Insurance
2.1 Idaho Homeowners Insurance 2.2 Idaho Commercial Property Insurance 2.3 Idaho Farm and Ranch Insurance
23 Chapter 3: Idaho Auto & Casualty Insurance
3.1 Idaho Auto Insurance Requirements 3.2 Idaho Liability Insurance 3.3 Idaho Commercial Auto Insurance
24 Chapter 4: Idaho Ethics & Professional Conduct
4.1 Unfair Trade Practices and Prohibited Conduct 4.2 Ethical Practices and Professional Responsibilities 4.3 Idaho Consumer Protection
2.3 Coinsurance and the Coinsurance Formula
Key Takeaways Explain This Topic AI
Coinsurance requires the insured to carry a stated percentage (often 80%, 90%, or 100%) of the property's value or face a penalty on every loss.
Payment = (Limit Carried / Amount Required) x Loss, where Amount Required = Value x Coinsurance %.
The settlement is the LESSER of the formula result, the actual loss, or the policy limit.
A ratio of 100% or more is capped at 100% — you never collect a bonus for over-insuring.
Agreed value or full insurance to value is the clean way to avoid the coinsurance penalty.
Last updated: June 2026
Why Coinsurance Exists
Most property losses are partial , not total. Without a penalty for underinsurance, an owner could insure a $1,000,000 building for only $200,000, pay a small premium, and still recover most partial losses — starving the insurer of premium for the true exposure. The coinsurance clause corrects this by penalizing inadequate limits on every covered loss. The clause is found in most commercial property forms and in dwelling-fire policies, and it is one of the highest-yield calculation topics on the property portion of the exam.
The clause rewards owners who carry limits close to full value with lower per-dollar rates, and it makes the insured a co-insurer for any shortfall below the required percentage. Coinsurance percentages are stated in the policy declarations; 80% is the most common, with 90% and 100% options available for lower rates in exchange for carrying more coverage. Coinsurance applies only to partial losses — a total loss simply pays the limit.
Higher coinsurance percentages buy a lower rate per $100 of coverage because the insurer is assured of collecting premium on a value close to the true exposure. The trade-off is that the insured must carry a higher limit to escape the penalty, leaving less room for error if values are underestimated. The clause is an example of the insurance principle of insurance to value , aligning the premium collected with the risk transferred.
The Coinsurance Formula
Memorize this exactly:
Payment = (Amount Carried / Amount Required) x Loss
where Amount Required = Property Value x Coinsurance % . The final settlement is the lesser of the formula result, the actual loss, or the policy limit. Three numbers, one cap — that is the whole mechanic.
A common memory aid is "did/should over should" : divide what you did carry by what you should have carried, then multiply by the loss. Note that value in the formula is measured at the time of loss , not when the policy was bound, so an appreciating building can quietly slide into underinsurance. Always read the question for the policy limit because it caps the formula result no matter how large the calculated payment is.
Coinsurance Calculation Steps
- Step Operation
- 1 Amount Required = Property Value x Coinsurance %
- 2 Ratio = Amount Carried / Amount Required (cap at 100%)
- 3 Formula Payment = Ratio x Loss
- 4 Settlement = lesser of formula payment, loss, or policy limit
Example 1 — No Penalty
Building value: $600,000 ; coinsurance: 80% ; limit carried: $480,000 ; loss: $120,000 .
Amount Required = $600,000 x 80% = $480,000 .
Ratio = $480,000 / $480,000 = 100% .
Payment = 100% x $120,000 = $120,000 — the full partial loss is paid because the owner insured to value.
Example 2 — Coinsurance Penalty
Same building and loss, but the owner carries only $360,000 .
Amount Required = $480,000 ; Amount Carried = $360,000.
Ratio = $360,000 / $480,000 = 75% .
Payment = 75% x $120,000 = $90,000 .
The insured absorbs a $30,000 penalty because, by underinsuring, they acted as a co-insurer for 25% of the exposure.
Example 3 — the Policy-Limit Cap Trap
Building value $1,000,000 ; coinsurance 80% ; limit $700,000 ; loss $900,000 .
Amount Required = $1,000,000 x 80% = $800,000 .
Ratio = $700,000 / $800,000 = 87.5% .
Formula result = 87.5% x $900,000 = $787,500 .
But payment cannot exceed the $700,000 limit, so the insurer pays $700,000 . Forgetting the cap is the most common error on this calculation.
Notice that in Example 3 the insured both under-insured to value and suffered a near-total loss, so two limits bite: the coinsurance penalty reduces the formula result, and the policy limit then caps the actual check. When a deductible is also present, subtract it after the coinsurance step but recognize that the policy limit still governs the maximum. Practicing several variations until the order of operations is automatic is the surest way to bank these points on test day.
Avoiding the Penalty and Insurance to Value
Insurance to value (ITV) is the ratio of coverage carried to property value. Meeting or exceeding the coinsurance percentage avoids any penalty; a ratio of 100% or more is capped at 100% — over-insuring earns no bonus. Buying agreed value removes coinsurance entirely. Because values drift upward, limits should be reviewed annually.
Worked ITV check: $480,000 of coverage on a $600,000 building gives an ITV of $480,000 / $600,000 = 80% , exactly satisfying an 80% requirement. If construction-cost inflation pushed the building's value to $640,000, the same $480,000 would only be 75% insured to value, re-opening the penalty on the next loss. This is why annual limit reviews and inflation-guard endorsements matter.
An inflation-guard endorsement automatically increases the limit by a stated percentage over the policy term to keep pace with rising replacement costs, helping the insured stay above the coinsurance threshold. A peak-season endorsement does the same for inventory that swings seasonally. Both are tools that protect the insured from sliding into a penalty as values change, and the exam may ask which endorsement addresses fluctuating or rising values.
Exam Cheat-Sheet
Amount Required = value x coinsurance %.
Payment is the lesser of the formula result, the actual loss, or the policy limit.
A ratio of 100% or more is treated as 100% — no bonus.
Coinsurance applies to partial losses only; agreed value removes it. Watch the policy-limit cap on large losses — it is the most common miss.