Study guide

13.3 Premium Basis, Experience Modification, and Classification

Idaho Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Idaho Property & Casualty Insurance Exam Overview

Idaho Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Idaho P&C Insurance Regulation & Licensing

1.1 Idaho Department of Insurance 1.2 Idaho P&C Producer Licensing Requirements 1.3 Continuing Education and License Maintenance

22 Chapter 2: Idaho Property Insurance

2.1 Idaho Homeowners Insurance 2.2 Idaho Commercial Property Insurance 2.3 Idaho Farm and Ranch Insurance

23 Chapter 3: Idaho Auto & Casualty Insurance

3.1 Idaho Auto Insurance Requirements 3.2 Idaho Liability Insurance 3.3 Idaho Commercial Auto Insurance

24 Chapter 4: Idaho Ethics & Professional Conduct

4.1 Unfair Trade Practices and Prohibited Conduct 4.2 Ethical Practices and Professional Responsibilities 4.3 Idaho Consumer Protection

13.3 Premium Basis, Experience Modification, and Classification

Key Takeaways Explain This Topic AI

Premium is based on payroll per $100, using classification codes that reflect job hazard.

Manual premium = (payroll / 100) x rate, calculated per class then summed.

The policy is auditable: estimated at inception, finalized by a post-term payroll audit.

An experience mod below 1.00 credits good loss history; above 1.00 debits poor history.

Large accounts may use premium discount, deductible, or retrospective rating plans.

Last updated: June 2026

How Workers Compensation Premium Is Built

Workers compensation premium is payroll-based . The insurer assigns each job a classification code with a rate per $100 of payroll, multiplies by estimated payroll, then adjusts for the employer's loss history. Because final payroll is unknown at inception, the policy is auditable : the company estimates premium up front and performs a payroll audit after expiration to set the actual premium.

Classification

Each occupation receives a classification code reflecting its hazard. A clerical worker has a low rate; a roofer has a high one. The governing classification is the main business operation. Misclassification is a frequent audit dispute and a common exam trap: payroll must be reported under the correct class, and certain payroll (overtime premium portion) may be adjusted.

Manual Premium Calculation

Manual (base) premium uses this formula:

(Payroll / 100) x Rate = Manual Premium

Example: a contractor has $600,000 of payroll in a class rated at $4.50 per $100.

$600,000 / 100 = 6,000 units.

6,000 x $4.50 = $27,000 manual premium .

If payroll is split across classes, calculate each class separately and add the results before applying the experience modifier.

Experience Modification (the Mod)

The experience modification factor (Mod) compares the employer's actual losses to expected losses for its class.

A Mod of 1.00 is average.

Below 1.00 (a credit Mod) means better-than-average losses and lowers premium.

Above 1.00 (a debit Mod) means worse-than-average losses and raises premium.

Example: $27,000 manual premium x a 0.85 Mod = $22,950 . A 1.20 Mod would instead produce $32,400. The Mod rewards safety and is the strongest selling point for loss control.

Premium Discount and Deductibles

Large accounts may earn a premium discount for size, or use a deductible plan . Retrospective rating (retro) adjusts final premium to actual losses within a min/max range. Smaller employers often use guaranteed cost with a flat audited premium.

Multi-Class Worked Example

A contractor has two classes: $300,000 of carpentry payroll rated $5.00 per $100 and $200,000 of clerical payroll rated $0.40 per $100.

Carpentry: ($300,000 / 100) x $5.00 = $15,000.

Clerical: ($200,000 / 100) x $0.40 = $800.

Manual premium = $15,000 + $800 = $15,800 .

Apply a 1.10 debit mod: $15,800 x 1.10 = $17,380 . Exam trap: clerical payroll must be kept separate and properly documented, or the auditor may apply the higher governing class rate to all payroll.

The Audit and Estimated Premium

Because payroll changes during the year, the up-front premium is a deposit based on estimated payroll. After expiration the insurer conducts a payroll audit (physical or voluntary) and issues an additional bill or a refund. The minimum charge to issue any policy is the expense constant plus a state-set minimum premium . An employer that refuses an audit may be charged an estimated premium up to a multiple of the deposit. Accurate records protect the employer from costly audit adjustments.

Full Premium Build-Up Sequence

Workers comp premium is built in a fixed order, and the exam may ask which step comes when:

Manual premium = (payroll / 100) x rate, summed across classes.

Apply the Experience Modification (Mod) — multiply the manual premium by the Mod factor.

Apply schedule rating credits/debits for risk-specific features (not all states).

Apply the premium discount for size (larger premium earns a bigger percentage discount).

Add the expense constant and test against the state minimum premium .

The Mod always applies before the premium discount. A common distractor reverses these, producing the wrong number.

How the Experience Mod Is Computed

The Mod compares the employer's actual losses over a three-year experience period (excluding the most recent year) to the expected losses for businesses in the same class. A formula weights primary losses (the first slice of each claim — frequency) more heavily than excess losses (severity), because the rating system penalizes frequent small claims more than one large one. This is why a contractor with many minor strains can have a worse Mod than one with a single catastrophic claim. A debit Mod above 1.00 also drives eligibility for construction credit programs in some states.

Worked Example — Discount After the Mod

A manufacturer has $1,000,000 of payroll at a $6.00 rate: manual premium = ($1,000,000 / 100) x $6.00 = $60,000 . Apply a credit Mod of 0.90 : $60,000 x 0.90 = $54,000 (modified premium). Now apply a size premium discount of, say, 9% on the standard premium: $54,000 x (1 − 0.09) = $49,140 . Reversing the order — applying the discount before the Mod — would yield a different, incorrect figure, which is why the sequence matters. After the policy expires, the payroll audit trues up the estimated $1,000,000 payroll to the actual figure and bills or refunds the difference.

Payroll Inclusions, Exclusions, and the Overtime Rule

Knowing what counts as "payroll" is an audit and exam staple. Included : wages, salaries, commissions, bonuses, holiday and vacation pay, and the value of certain non-cash compensation. Excluded or limited : the premium portion of overtime (the extra half of time-and-a-half is removed, so only straight-time counts), tips, certain employer contributions, and severance. Executive officer payroll is capped between a state-set minimum and maximum per week when they elect coverage.

The auditor will reclassify payroll to the governing class if the employer cannot produce records segregating, say, clerical from field labor — which is why clean payroll records directly protect premium. Misreporting that converts a high-rated roofer's hours to a low-rated clerical class is the kind of error the audit is designed to catch.