Study guide

4.3 Histograms & Frequency Distributions in Civil Service Reporting

Irish Public Service Numerical Reasoning Test Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Test Overview, Structure & Assessment Strategies

1.1 Test Overview, Structure & Administration 1.2 Pacing, Time Management & Exam Strategies 1.3 Assessment Interfaces, Tabbed Layouts & 'Cannot Say' Logic

2 Chapter 2: Core Arithmetic, Fractions & Decimals

2.1 Order of Operations & Mental Arithmetic Techniques 2.2 Fractions & Rational Numbers in Public Administration 2.3 Decimals, Rounding & Unit Conversions

3 Chapter 3: Percentages, Ratios & Proportions

3.1 Percentage Calculation & Base Identification 3.2 Percentage Change, Reverse Percentages & Multipliers 3.3 Ratios, Partitioning & Proportional Allocation 3.4 Rates, Staffing Metrics & Weighted Averages

4 Chapter 4: Statistical Tables & Bar Charts

4.1 Tabular Data Interpretation & Footnote Traps 4.2 Bar Charts, Clustered Bars & Segmented Stacks 4.3 Histograms & Frequency Distributions in Civil Service Reporting

5 Chapter 5: Line Graphs, Pie Charts & Multi-Source Synthesis

5.1 Line Graphs, Time Series & Trend Analysis 5.2 Pie Charts & Proportional Sector Expenditure 5.3 Multi-Source Data Synthesis & Cross-Referencing

6 Chapter 6: Financial Computations & Public Expenditure

6.1 Public Sector Budgeting, Allocation & Variance Analysis 6.2 Unit Costing, Service Delivery & Economies of Scale 6.3 Taxation, VAT & Net-to-Gross Calculations 6.4 Inflation, Indexation & Real vs Nominal Values

7 Chapter 7: Numerical Series, Sequences & Rapid Estimation

7.1 Arithmetic, Geometric & Two-Stage Number Sequences 7.2 Interleaved, Fibonacci & Pattern Recognition Series 7.3 High-Speed Estimation, Rounding & Order-of-Magnitude Filtering 7.4 Distractor Analysis, Unit Verification & Sanity Checking

4.3 Histograms & Frequency Distributions in Civil Service Reporting

Key Takeaways Explain This Topic AI

Histograms group numerical data into adjacent intervals; the axis label determines whether heights show frequency or density.

On a frequency-density histogram, height is frequency divided by class width and bar area equals frequency; normalized density gives relative-frequency area, with total area one.

The tallest density bar identifies a modal interval. A grouped median estimated at cumulative level N/2 requires an explicit within-class interpolation assumption.

An ogive is non-decreasing but need not be S-shaped; grouped quantiles read from it are estimates between known boundaries.

Last updated: October 2026

Histograms vs. Bar Charts: The Continuous Data Distinction

Histograms group a numerical variable into intervals. The variable can be continuous, such as measured duration, or discrete numerical data grouped for display, such as ages recorded in whole years. Bar charts instead compare categories; a year-by-year bar chart can also display time observations.

Spacing: Adjacent histogram bins follow the numerical scale. A zero-frequency interval has zero height; do not insert arbitrary gaps between nonempty adjacent bins.

Equal widths: With frequency on the vertical axis, heights show counts and areas are proportional to counts.

Frequency-density scale: Height is frequency divided by class width, so area equals frequency in the axis units. This gives a fair area comparison when widths differ.

Relative-density scale: If height is frequency divided by total observations and width, areas show proportions and sum to one. Always read the axis label before interpreting height or area.

Class Intervals & Equal vs. Unequal Bin Widths

Continuous variables are grouped into class intervals (or bins). Use non-overlapping intervals with explicit boundary conventions. Let L L L and U U U denote the lower and upper boundaries, not just the printed smallest and largest integer labels. The class width ( w w w ) is the difference between these boundaries: w = U − L w = U - L w = U − L

Equal Class Widths

When all intervals share an identical width (e.g., age groups 20 – 29 20\text{--}29 20 – 29 , 30 – 39 30\text{--}39 30 – 39 , 40 – 49 40\text{--}49 40 – 49 , using boundaries 19.5–29.5, 29.5–39.5 and 39.5–49.5 for whole-year records, each of width 10 years), the vertical axis can display raw frequency directly. Because widths are identical, a bar with twice the frequency has twice the height and twice the area.

Unequal Class Widths: The Distortion Trap

A practice display may use unequal intervals. For example, administrative earnings data might group salaries into €10,000 bands at lower pay scales, but widen to €20,000 or €30,000 bands at senior management levels.

If raw frequency were plotted on the vertical axis for unequal intervals:

A wide interval covering €60,000 to €90,000 ( w = 30 w = 30 w = 30 ) might contain 1,500 employees.

A narrower interval covering €45,000 to €60,000 ( w = 15 w = 15 w = 15 ) might contain 1,200 employees.

Plotting raw frequency would make the €60k–€90k bar taller (1,500 vs. 1,200), falsely suggesting higher staff concentration. In reality, employees are far more densely clustered in the narrower €45k–€60k band (80 staff per €1k width vs. 50 staff per €1k width).

The Frequency Density Principle

To eliminate visual and mathematical distortion when class widths vary, a density histogram scales the vertical axis using frequency density :

Frequency Density = Class Frequency Class Width = f w \text{Frequency Density} = \frac{\text{Class Frequency}}{\text{Class Width}} = \frac{f}{w} Frequency Density = Class Width Class Frequency ​ = w f ​

Rearranging this formula confirms that the physical area of the bar equals the frequency: Frequency (Area) = Frequency Density × Class Width = ( f w ) × w = f \text{Frequency (Area)} = \text{Frequency Density} \times \text{Class Width} = \left(\frac{f}{w}\right) \times w = f Frequency (Area) = Frequency Density × Class Width = ( w f ​ ) × w = f

Important

Read the vertical scale. On a frequency-density histogram, multiply height by class width to recover the count. On a normalized-density histogram, that area is a relative frequency; multiply it by the total number of observations to recover the count. Raw frequency heights give counts directly, but unequal-width bars then have areas that do not fairly compare counts.

Identifying the Modal Interval & Estimating the Median Class

Two fundamental measures of central tendency tested in public service frequency distributions are the modal interval and the median class .

1. The Modal Interval (Mode)

For a density histogram, call the interval with the highest frequency density the modal interval. This describes the tallest density bar, rather than necessarily the interval containing the most observations. Grouped counts do not establish the exact mode within a bin:

For equal class intervals , it is simply the interval with the highest raw frequency.

For unequal class intervals , it is the interval with the highest frequency density , NOT necessarily the highest raw frequency. A wide bin with a large raw frequency may have a low density, disqualifying it as the modal group.

2. The Median Class & Continuous Linear Interpolation

The median is a 50th-percentile measure. For raw data with an even number of observations, the sample median is the average of the two middle ordered values. Grouped counts generally cannot recover those exact values.

To estimate a grouped median, use the cumulative-frequency level N / 2 N/2 N /2 . Locate where that level falls, then assume observations are spread uniformly within that bin. Linear interpolation gives:

Estimated Median = L + ( N / 2 − c f prev f m ) × w \text{Estimated Median}=L+\left(\frac{N/2-cf_{\text{prev}}}{f_m}\right)\times w Estimated Median = L + ( f m ​ N /2 − c f prev ​ ​ ) × w

This is an estimate under a within-class assumption, not a precise raw-data median. If the cumulative halfway level is exactly a class boundary, interpolation reaches that boundary; do not infer that both central raw observations belong to the same class.

Where:

  • L L L = Lower boundary of the median class interval
  • N N N = Total number of observations across all classes

c f prev cf_{\text{prev}} c f prev ​ = Cumulative frequency of the class immediately preceding the median class

  • f m f_m f m ​ = Frequency of the median class itself
  • w w w = Class width of the median class interval
  • Cumulative Frequency Distributions & Ogives

A cumulative frequency distribution records the running total of frequencies up to the upper boundary of each class interval. When plotted on a graph, this gives a non-decreasing cumulative graph known as an ogive . Its shape need not be S-shaped. Between known boundaries, a straight segment implies uniform within-class interpolation.

Reading Quantiles from an Ogive

Median ( Q 2 Q_2 Q 2 ​ ): Read across horizontally from the 50 % 50\% 50% cumulative frequency level ( 0.50 × N 0.50 \times N 0.50 × N ) to intersect the curve, then drop vertically to read the median value on the horizontal axis.

Lower Quartile ( Q 1 Q_1 Q 1 ​ ): Read across from the 25 % 25\% 25% level ( 0.25 × N 0.25 \times N 0.25 × N ).

Upper Quartile ( Q 3 Q_3 Q 3 ​ ): Read across from the 75 % 75\% 75% level ( 0.75 × N 0.75 \times N 0.75 × N ).

Interquartile Range ( I Q R IQR I QR ): Calculated as I Q R = Q 3 − Q 1 IQR = Q_3 - Q_1 I QR = Q 3 ​ − Q 1 ​ , measuring the dispersion of the central 50 % 50\% 50% of the distribution, less sensitive than the mean to the magnitudes of extreme tail values. Quantile estimates from grouped data depend on the grouping and interpolation method.

Case Study: Civil Service Passport Application Processing Times

The following hypothetical dataset contains 1,200 processing durations, recorded to the nearest whole working day. For histogram interpolation, use boundaries 0.5–5.5, 5.5–10.5, 10.5–15.5, 15.5–25.5, 25.5–40.5 and 40.5–65.5 days. Thus the printed 1–5 group has width 5, rather than 5 - 1. These are exercise data, not a claim about the Passport Service’s actual performance.

Processing Duration (Working Days) Number of Applications (Frequency f f f ) Cumulative Frequency ( c f cf c f ) Class Width ( w w w ) Frequency Density (Cases per Day)

  • 1 to 5 days 180 180 5 180 / 5 = 36.0 180 / 5 = 36.0 180/5 = 36.0
  • 6 to 10 days 340 520 5 340 / 5 = 68.0 340 / 5 = 68.0 340/5 = 68.0
  • 11 to 15 days 420 940 5 420 / 5 = 84.0 420 / 5 = 84.0 420/5 = 84.0
  • 16 to 25 days 160 1,100 10 160 / 10 = 16.0 160 / 10 = 16.0 160/10 = 16.0
  • 26 to 40 days 75 1,175 15 75 / 15 = 5.0 75 / 15 = 5.0 75/15 = 5.0
  • 41 to 65 days 25 1,200 25 25 / 25 = 1.0 25 / 25 = 1.0 25/25 = 1.0
  • Total 1,200 — — —
  • Worked Walkthrough: Modal Group, Median & SLA Compliance
  • 1. Determining the Modal Class

Comparing frequency densities across all classes:

  • 1–5 days: 36.0 cases/day
  • 6–10 days: 68.0 cases/day
  • 11–15 days: 84.0 cases/day
  • 16–25 days: 16.0 cases/day
  • 26–40 days: 5.0 cases/day
  • 41–65 days: 1.0 cases/day

The modal class is 11 to 15 days , as it possesses the highest frequency density (84.0 cases per day).

2. Calculating Estimated Median via Linear Interpolation

Total applications N = 1,200 N = 1{,}200 N = 1 , 200 . The grouped interpolation level is N / 2 = 600 N/2=600 N /2 = 600 . The exact sample median would average ordered observations 600 and 601.

Both central observations lie within the 11 to 15 days class (since cumulative frequency reaches 520 at 10 days and 940 at 15 days).

Variables: L = 10.5 L = 10.5 L = 10.5 (continuous lower boundary), c f prev = 520 cf_{\text{prev}} = 520 c f prev ​ = 520 , f m = 420 f_m = 420 f m ​ = 420 , w = 5 w = 5 w = 5 . Estimated Median = 10.5 + ( 600 − 520 420 ) × 5 = 10.5 + ( 80 420 ) × 5 ≈ 10.5 + 0.95238 ≈ 11.45 working days \text{Estimated Median} = 10.5 + \left(\frac{600 - 520}{420}\right) \times 5 = 10.5 + \left(\frac{80}{420}\right) \times 5 \approx 10.5 + 0.95238 \approx 11.45\text{ working days} Estimated Median = 10.5 + ( 420 600 − 520 ​ ) × 5 = 10.5 + ( 420 80 ​ ) × 5 ≈ 10.5 + 0.95238 ≈ 11.45 working days

3. Evaluating Service Level Agreement (SLA) Compliance

Scenario: A hypothetical service target requires that at least 75.0 % 75.0\% 75.0% of complex renewals must be resolved within 15 working days.

Cumulative applications resolved within 15 days = 940 = 940 = 940 .

Percentage achieved: ( 940 1,200 ) × 100 ≈ 78.33 % \left(\frac{940}{1{,}200}\right) \times 100 \approx 78.33\% ( 1 , 200 940 ​ ) × 100 ≈ 78.33% .

Conclusion: The Department exceeded the stipulated target by 3.33 3.33 3.33 percentage points ( 78.33 % − 75.0 % 78.33\% - 75.0\% 78.33% − 75.0% ).

Tip

In questions asking for "the proportion of cases exceeding X X X days", subtract the cumulative frequency from the total: for applications exceeding 25 days, the count is 1,200 − 1,100 = 100 1{,}200 - 1{,}100 = 100 1 , 200 − 1 , 100 = 100 cases, or ( 100 / 1,200 ) × 100 ≈ 8.33 % (100 / 1{,}200) \times 100 \approx 8.33\% ( 100/1 , 200 ) × 100 ≈ 8.33% .