Study guide
2.3 Dilutions, Alligations & Reconstitution
PSI Equivalence Examination Third Country Qualification Recognition
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & TCQR Framework
1.1 TCQR Pathway and PSI Equivalence Exam Structure 1.2 PSI Core Competency Framework and MPharm Standard 1.3 Irish Healthcare System & Pharmacy Environment
2 Chapter 2: Pharmaceutical Calculations
2.1 Paediatric & Adult Dose Calculations 2.2 Percentage Strengths, Ratio Strengths & PPM Conversions 2.3 Dilutions, Alligations & Reconstitution 2.4 Infusion Rates, Syringe Drivers & Opioid Equianalgesic Conversions
3 Chapter 3: Pharmacology & Applied Pharmacokinetics
3.1 Receptor Pharmacology & Autonomic Nervous System 3.2 Cardiovascular & Renal Pharmacology 3.3 Central Nervous System & Antimicrobial Pharmacology 3.4 Pharmacokinetics & Narrow Therapeutic Index Drugs
4 Chapter 4: Basic Science & Pharmaceutics
4.1 Physicochemical Properties of Drugs 4.2 Dosage Form Formulation & Excipients 4.3 Drug Stability, Degradation & Bioequivalence
5 Chapter 5: Pharmacy Practice & Dispensing Workflow
5.1 Prescription Validation & Dispensing Workflow 5.2 Patient Counselling & Medicines Safety 5.3 Responding to Symptoms & Minor Ailments 5.4 Primary Care Schemes & Community Services
6 Chapter 6: Irish Pharmacy Law & Professional Ethics
6.1 Pharmacy Act 2007 & PSI Governance 6.2 Medicinal Products Regulations 6.3 Controlled Drugs Legislation & Misuse of Drugs Regulations 6.4 Professional Ethics & Code of Conduct
7 Chapter 7: Clinical Therapeutics & Disease State Management
7.1 Respiratory & Endocrine Therapeutics 7.2 Cardiovascular & Gastrointestinal Therapeutics 7.3 Infections, Antimicrobial Stewardship & Public Health 7.4 Special Populations & Complex Care
8 Chapter 8: OSCE & Practical Clinical Communication Skills
8.1 OSCE Station Structure & Core Competencies 8.2 Structured Patient Consultations & Devices Counselling 8.3 Prescriber Interventions, Ethical Dilemmas & Professional Judgement
2.3 Dilutions, Alligations & Reconstitution
Key Takeaways Explain This Topic AI
The fundamental dilution formula C1V1 = C2V2 relies on mass balance, where active solute amount remains constant while volume increases.
Alligation Alternate calculates exact proportional parts of two different strengths (CH and CL) needed to obtain an intermediate target strength (CT).
Powder Volume (PV = Vf - Vd) accounts for physical liquid volume displacement by dry powders during reconstitution.
Displacement Value (DV) represents the volume (in mL) displaced by 1 gram of dry powder.
Failing to account for displacement values in paediatric oral suspensions or IV reconstitutions causes significant dosing errors.
Last updated: July 2026
- 2.3 Dilutions, Alligations & Reconstitution
- Introduction to Compounding & Dilution Mechanics
Pharmaceutical compounding and reconstitution of dry powder formulations require exact mathematical calculations to achieve the intended final drug concentration. In clinical practice across Irish hospital and community pharmacy settings, pharmacists frequently encounter stock solution dilutions, non-standard strength compounding via alligation, and displacement calculations for dry powder oral suspensions and parenteral injections.
1. Dilution Principles & C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 V 1 = C 2 V 2
When diluting a solution by adding diluent (e.g., Water for Injections or 0.9% Sodium Chloride), the total amount of active solute remains constant , while total volume increases and concentration decreases proportionally.
The Fundamental Dilution Formula: C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 V 1 = C 2 V 2
Where:
- C 1 C_1 C 1 = Initial concentration of stock solution
- V 1 V_1 V 1 = Initial volume of stock solution required
- C 2 C_2 C 2 = Final target concentration of diluted solution
- V 2 V_2 V 2 = Final target volume of diluted solution
Diluent Volume Determination: Volume of Diluent to Add = V 2 − V 1 \text{Volume of Diluent to Add} = V_2 - V_1 Volume of Diluent to Add = V 2 − V 1
Note: C 1 C_1 C 1 and C 2 C_2 C 2 must be in identical concentration units (e.g., % w/v, mg/mL, or ratio strength), and V 1 V_1 V 1 and V 2 V_2 V 2 must be in matching volume units (e.g., mL or L).
2. Alligation Alternate & Alligation Medial
When two solutions or semi-solid preparations of different strengths ( C High C_{\text{High}} C High and C Low C_{\text{Low}} C Low ) are mixed to obtain an intermediate target strength ( C Target C_{\text{Target}} C Target ), the Alligation Alternate method is used.
Alligation Grid Construction:
Set up the grid with C High C_{\text{High}} C High at the top-left, C Low C_{\text{Low}} C Low at the bottom-left, and C Target C_{\text{Target}} C Target in the centre: C High Parts of C High = C Target − C Low C Target C Low Parts of C Low = C High − C Target \begin{array}{ccc}
- C_{\text{High}} & & \text{Parts of } C_{\text{High}} = C_{\text{Target}} - C_{\text{Low}} \\
- & C_{\text{Target}} & \\
- C_{\text{Low}} & & \text{Parts of } C_{\text{Low}} = C_{\text{High}} - C_{\text{Target}}
\end{array} C High C Low C Target Parts of C High = C Target − C Low Parts of C Low = C High − C Target Total Parts = Parts of C High + Parts of C Low = C High − C Low \text{Total Parts} = \text{Parts of } C_{\text{High}} + \text{Parts of } C_{\text{Low}} = C_{\text{High}} - C_{\text{Low}} Total Parts = Parts of C High + Parts of C Low = C High − C Low
Proportional Calculation: Quantity of C High = ( Parts of C High Total Parts ) × Total Required Quantity \text{Quantity of } C_{\text{High}} = \left( \frac{\text{Parts of } C_{\text{High}}}{\text{Total Parts}} \right) \times \text{Total Required Quantity} Quantity of C High = ( Total Parts Parts of C High ) × Total Required Quantity Quantity of C Low = ( Parts of C Low Total Parts ) × Total Required Quantity \text{Quantity of } C_{\text{Low}} = \left( \frac{\text{Parts of } C_{\text{Low}}}{\text{Total Parts}} \right) \times \text{Total Required Quantity} Quantity of C Low = ( Total Parts Parts of C Low ) × Total Required Quantity
3. Powder Volume & Displacement Value Calculations
Dry powder injections and oral antibiotic suspensions occupy physical volume when reconstituted with liquid diluent. Failing to account for powder displacement leads to significant dosing errors.
Key Definitions & Formulas:
Final Reconstituted Volume ( V f V_f V f ): Total volume of liquid after complete reconstitution of powder with diluent.
Diluent Volume ( V d V_d V d ): Actual volume of liquid added to the dry powder.
Powder Volume ( P V PV P V ): Volume occupied by the dry powder itself. P V = V f − V d PV = V_f - V_d P V = V f − V d
Displacement Value ( D V DV D V ): The volume of liquid (in mL) displaced by a specific mass (typically 1 gram or 1 vial) of dry powder. Displacement Value (mL/g) = Powder Volume (mL) Mass of Powder (g) \text{Displacement Value (mL/g)} = \frac{\text{Powder Volume (mL)}}{\text{Mass of Powder (g)}} Displacement Value (mL/g) = Mass of Powder (g) Powder Volume (mL)
4. Step-by-Step Worked Numerical Examples
Worked Example 2.3.1: Stock Solution Dilution ( C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 V 1 = C 2 V 2 )
Clinical Scenario: A pharmacist needs to prepare 500 mL of a 0.05% w/v Chlorhexidine solution by diluting a 2% w/v Chlorhexidine concentrate stock solution. Calculate:
The volume of 2% stock solution required ( V 1 V_1 V 1 ).
The volume of purified water diluent to add.
Solution:
Step 1: Apply C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 V 1 = C 2 V 2 2 % × V 1 = 0.05 % × 500 mL 2\% \times V_1 = 0.05\% \times 500\text{ mL} 2% × V 1 = 0.05% × 500 mL
Step 2: Solve for V 1 V_1 V 1 V 1 = 0.05 × 500 2 = 25 2 = 12.5 mL V_1 = \frac{0.05 \times 500}{2} = \frac{25}{2} = 12.5\text{ mL} V 1 = 2 0.05 × 500 = 2 25 = 12.5 mL
Step 3: Calculate Diluent Volume Diluent Volume = V 2 − V 1 = 500 mL − 12.5 mL = 487.5 mL \text{Diluent Volume} = V_2 - V_1 = 500\text{ mL} - 12.5\text{ mL} = 487.5\text{ mL} Diluent Volume = V 2 − V 1 = 500 mL − 12.5 mL = 487.5 mL
Worked Example 2.3.2: Alligation Alternate Ointment Compounding
Clinical Scenario: Prepare 300 g of a 5% w/w Coal Tar ointment by mixing a 20% w/w Coal Tar ointment and a 2% w/w Coal Tar ointment stock. Calculate the exact mass (in grams) of each stock ointment required.
Solution:
- Step 1: Set Up Alligation Grid
- C High = 20 % C_{\text{High}} = 20\% C High = 20%
- C Low = 2 % C_{\text{Low}} = 2\% C Low = 2%
- C Target = 5 % C_{\text{Target}} = 5\% C Target = 5%
- Parts of 20% ointment = 5 − 2 = 3 parts 5 - 2 = 3\text{ parts} 5 − 2 = 3 parts
- Parts of 2% ointment = 20 − 5 = 15 parts 20 - 5 = 15\text{ parts} 20 − 5 = 15 parts
- Total Parts = 3 + 15 = 18 parts 3 + 15 = 18\text{ parts} 3 + 15 = 18 parts
Step 2: Calculate Mass of 20% Ointment Mass of 20% = ( 3 18 ) × 300 g = 1 6 × 300 g = 50 g \text{Mass of 20\%} = \left( \frac{3}{18} \right) \times 300\text{ g} = \frac{1}{6} \times 300\text{ g} = 50\text{ g} Mass of 20% = ( 18 3 ) × 300 g = 6 1 × 300 g = 50 g
Step 3: Calculate Mass of 2% Ointment Mass of 2% = ( 15 18 ) × 300 g = 5 6 × 300 g = 250 g \text{Mass of 2\%} = \left( \frac{15}{18} \right) \times 300\text{ g} = \frac{5}{6} \times 300\text{ g} = 250\text{ g} Mass of 2% = ( 18 15 ) × 300 g = 6 5 × 300 g = 250 g
Verification: 50 g + 250 g = 300 g 50\text{ g} + 250\text{ g} = 300\text{ g} 50 g + 250 g = 300 g .
Worked Example 2.3.3: Antibiotic Reconstitution & Displacement Value
Clinical Scenario: A vial containing 1 g of Ampicillin dry powder has a known displacement value of 0.7 mL per 1 g vial.
If 4.3 mL of Water for Injections is added to the 1 g vial, what is the final reconstituted volume?
What is the resulting concentration of Ampicillin in mg/mL?
What volume of reconstituted solution must be withdrawn to administer a dose of 250 mg?
Solution:
Step 1: Calculate Final Reconstituted Volume ( V f V_f V f ) V f = V d + P V = 4.3 mL + 0.7 mL = 5.0 mL V_f = V_d + PV = 4.3\text{ mL} + 0.7\text{ mL} = 5.0\text{ mL} V f = V d + P V = 4.3 mL + 0.7 mL = 5.0 mL
Step 2: Calculate Reconstituted Concentration (mg/mL) Concentration = 1 , 000 mg 5.0 mL = 200 mg/mL \text{Concentration} = \frac{1,000\text{ mg}}{5.0\text{ mL}} = 200\text{ mg/mL} Concentration = 5.0 mL 1 , 000 mg = 200 mg/mL
Step 3: Calculate Volume for 250 mg Dose Volume = 250 mg 200 mg/mL = 1.25 mL \text{Volume} = \frac{250\text{ mg}}{200\text{ mg/mL}} = 1.25\text{ mL} Volume = 200 mg/mL 250 mg = 1.25 mL
5. Method Comparison Table
Technique Primary Equation / Method Primary Clinical Application
Simple Dilution C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 V 1 = C 2 V 2 Preparing stock solution dilutions, pediatric IV dilutions
Alligation Alternate Cross-grid subtraction Mixing two semi-solid or liquid stock bases to custom %
Displacement Reconstitution P V = V f − V d PV = V_f - V_d P V = V f − V d Reconstituting IV antibiotic vials and oral suspensions