Study guide
3.2 MMA/SMAW Process & Flux-Coated Electrodes
IIW International Welding Inspector — Standard IWI-S
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the IWI-S Qualification 1.2 Exam Structure, Routes & Scoring 1.3 How to Use This Guide
2 Inspector Role & Responsibilities
2.1 Inspector Duties Across the Weld Lifecycle 2.2 Reports, Traceability & Authority 2.3 IWI-S vs Basic and Comprehensive
3 Chapter 3: Arc Welding Processes I
3.1 Welding Technology Overview & Arc Fundamentals 3.2 MMA/SMAW Process & Flux-Coated Electrodes 3.3 MIG/MAG (GMAW) & Flux-Cored Arc Welding 3.4 TIG/GTAW Process
4 Chapter 4: Processes, Parameters & Consumables
4.1 SAW and Other Welding Processes 4.2 Cutting, Edge Preparation & Mechanisation 4.3 Heat Input, Arc Energy, Polarity & Parameters 4.4 ISO 4063 Process Numbers & Consumable Standards
5 Chapter 5: Metallurgy Foundations
5.1 Metals, Fe-C Alloys & Steel Classification 5.2 Structure of the Welded Joint & HAZ Zones 5.3 Carbon Equivalent, Hardenability & ISO/TR 15608 Groups
6 Chapter 6: Cracking Phenomena
6.1 Hydrogen Cold Cracking 6.2 Hot & Solidification Cracking 6.3 Lamellar Tearing 6.4 Fracture Types Related to Weld Defects
7 Chapter 7: Heat Treatment & Steel Families
7.1 Preheat, Interpass & PWHT 7.2 Carbon, Low-Alloy & Fine-Grain Steels 7.3 Creep-Resistant & Cryogenic Steels
8 Chapter 8: Stainless, Aluminium & Other Materials
8.1 Stainless & Heat-Resistant Steels 8.2 Aluminium & Aluminium Alloys 8.3 Nickel, Dissimilar Joints & Other Materials 8.4 Corrosion, Wear & Protective Layers
9 Chapter 9: Design & Welding Symbols
9.1 Strength of Materials Basics for Inspectors 9.2 Welded Joint Design & Preparation 9.3 ISO 2553 Welding Symbols 9.4 Fillet Throat Sizing & Structural Loading
10 Chapter 10: Fatigue, Distortion & Fabrication
10.1 Fatigue, Weld-Toe Effects & Fracture Mechanics Intro 10.2 Residual Stress & Distortion Control 10.3 Repair Welding, Plant Facilities & Health/Safety
11 Chapter 11: Weld Imperfections I
11.1 ISO 6520 Imperfection Classification 11.2 Cracks — Causes & Prevention 11.3 Porosity & Gas-Related Imperfections 11.4 Lack of Fusion & Lack of Penetration
12 Chapter 12: Weld Imperfections II
12.1 Undercut, Overlap & Shape Imperfections 12.2 Inclusions, Misalignment & Miscellaneous Defects 12.3 Evaluating Imperfections for Acceptance
13 Chapter 13: Surface NDT Methods
13.1 Visual Testing (ISO 17637) 13.2 Liquid Penetrant Testing (PT) 13.3 Magnetic Particle Testing (MT)
14 Chapter 14: Volumetric NDT & Destructive Tests
14.1 Radiographic Testing (RT) & Film Quality 14.2 Ultrasonic Testing (UT) 14.3 NDT Method Selection, IQI & ISO 9712 14.4 Destructive Testing of Welded Joints
15 Chapter 15: Codes, Acceptance & Qualification
15.1 ISO 5817 Quality Levels B/C/D 15.2 ISO 3834 Quality Requirements 15.3 WPS, WPQR & ISO 15614 15.4 Welder Qualification ISO 9606
16 Chapter 16: QA Documentation & Exam Strategy
16.1 Inspection Stages, ITPs & Hold Points 16.2 Materials Certificates, Traceability & In-Process Control 16.3 NCR, Reporting & QC Documents 16.4 Application of Standards & Practical Exam Strategy
3.2 MMA/SMAW Process & Flux-Coated Electrodes
Key Takeaways Explain This Topic AI
MMA/SMAW (ISO 4063 process 111) uses a flux-coated consumable electrode on a constant-current power source with manual arc length control
Flux coatings shield the pool, form slag, stabilise the arc, and may add deoxidizers and alloys; coating type strongly affects bead shape and hydrogen risk
Basic (low-hydrogen) electrodes need dry storage and baking/holding per manufacturer data; damp or cellulosic electrodes raise hydrogen cold-cracking risk on susceptible steels
ISO 2560-type designations encode strength, coating, and positional capability—inspectors check marking against the WPS consumable
Inspector checks include correct electrode classification and size, coating condition, polarity, current range, and interpass cleaning of slag
Last updated: July 2026
3.2 MMA/SMAW Process & Flux-Coated Electrodes
Quick Answer: MMA (Manual Metal Arc) / SMAW (Shielded Metal Arc Welding), ISO 4063 111 , is stick welding with a flux-coated consumable electrode on a CC power source. The coating provides shielding gas, slag, arc stabilisers, and alloying . Inspectors verify electrode type and condition, polarity, current range, and dry storage for low-hydrogen grades.
Process Overview
In MMA/SMAW the welder feeds a coated stick electrode into the joint while maintaining arc length by hand. The core wire melts into the pool; the coating decomposes and forms slag over the bead. Equipment is simple: CC power source, electrode holder, work clamp, and leads. That simplicity makes 111 the default for site repair, maintenance, and outdoor work where gas cylinders are impractical—provided wind and moisture controls still meet the WPS.
Key process traits for inspectors:
Consumable electrode — classification must match the WPS (strength, coating, hydrogen designator where specified).
Self-generated shielding — coating gases and slag protect the pool; no separate shielding gas cylinder for standard carbon-steel electrodes.
Slag removal — each pass must be cleaned before the next; trapped slag is a classic solid inclusion.
Duty cycle and electrode length — frequent stops to change sticks lower effective deposition versus continuous wire processes.
Flux Coating Functions
The baked coating is not cosmetic paint. It performs several concurrent jobs:
Shielding — thermal decomposition releases gases (for example CO₂, CO, H₂/H₂O-related species depending on coating chemistry) that displace air from the arc and pool zone.
Slag formation — molten oxides and silicates float on the weld metal, shape the bead, slow cooling, and continue protection during solidification.
Arc stabilisation — ionizing compounds (often sodium or potassium compounds) help re-strike and steady the arc, including on AC where specified.
Deoxidation and alloying — manganese, silicon, and other additions refine weld metal chemistry and mechanical properties.
Usability aids — iron powder in some coatings raises deposition rate; cellulose in others drives deep penetration and a forceful arc for open-root pipe work.
If coating is cracked, greasy, or wet, those functions fail partially or completely—expect porosity, unstable arc, and elevated hydrogen.
Electrode Classification Concepts (ISO 2560 Family)
IWI-S candidates should understand classification logic , not memorize every commercial brand. Under systems such as ISO 2560 (covered electrodes for non-alloy and fine-grain steels), designations encode information of the form:
- Strength / toughness levels of deposited metal
- Coating type and usability (including positional capability)
- Electrical characteristics (current type / polarity suitability)
- Hydrogen designators where low-hydrogen performance is claimed
In parallel market language you will still see AWS-style marks such as E6010 , E6013 , E7018 . Treat them as process-family examples :
E60xx / E70xx — approximate tensile strength class (×1000 psi in the AWS scheme).
Third digit — positional capability family.
Coating / usability digit — links to cellulosic, rutile, basic, iron-powder behaviours.
On site, the inspector’s job is simple: the electrode stamp on the stub and carton must match the WPS consumable (including any hydrogen, brand, or lot controls required by the quality plan). Do not accept “equivalent looking” electrodes without engineering approval and, where required, requalification.
- Coating Families: Basic, Rutile, Cellulosic
- Basic (low-hydrogen) coatings
Often associated with DCEP operation and all-position structural work when correctly classified.
Give good toughness potential and low diffusible hydrogen when stored dry.
Sensitive to moisture pickup — require heated quivers, holding ovens, and controlled issue from sealed packs per manufacturer and WPS.
Typical field example language: low-hydrogen structural electrodes used for restrained joints on carbon and low-alloy steels.
Rutile coatings
Easy arc strike, smooth bead appearance, good welder appeal for general fabrication.
Moderate penetration relative to cellulosic; slag often easy to remove.
Hydrogen levels are generally higher than carefully controlled basic electrodes—suitability depends on steel, thickness, restraint, and procedure.
Cellulosic coatings
High cellulose content produces a digging, forceful arc and deep penetration—historically common for open-root pipe welding in certain industries.
Generate significant hydrogen in the arc atmosphere.
On hardenable or highly restrained steels, cellulosic electrodes can elevate hydrogen cold cracking risk unless procedures (preheat, interpass, consumable choice) control it.
Storage rules differ from basic electrodes; do not bake cellulosic electrodes as if they were low-hydrogen basics—follow the manufacturer. The inspection point is still condition and WPS compliance , not improvised oven practice.
Hydrogen Risk, Damp Electrodes, Storage and Baking
Diffusible hydrogen in weld metal and HAZ is a primary driver of hydrogen-assisted cold cracking on susceptible steels (covered in depth in the metallurgy chapters). For MMA:
Sources — moisture in coating, cellulose chemistry, contaminated joint surfaces, humid atmosphere on exposed basic electrodes.
Controls — sealed packaging, issue control, holding at specified temperature, re-drying/baking only when the manufacturer and procedure allow it, limited exposure time on the shop floor.
Inspector actions — check oven/quiver temperatures and logs, reject electrodes with damaged flux, wet cartons, or undocumented redrying; verify that cellulosic use is actually permitted by the WPS for that material and joint.
A common non-conformance is basic electrodes left overnight on a cold bench, then used on thick restrained butt welds without reconditioning. That is both a consumable control failure and a cracking risk.
Inspector Checks for MMA/SMAW
Use a systematic checklist aligned with the ITP:
Correct electrode — classification, diameter, and any brand/lot requirements per WPS and traceability rules.
Condition — coating intact, dry (as required), free of oil and dirt; stubs not reused beyond good practice.
Power and polarity — CC source (or correct multi-process mode); polarity matches electrode and WPS.
Current range — amperage within WPS and manufacturer limits for diameter and position; watch for overheating electrodes or cold, ropey beads at the extremes.
Technique-related process control — arc length roughly electrode diameter (process guidance), correct travel angle for position, adequate root cleaning between passes.
Environment — wind and rain protection; joint cleanliness; preheat/interpass when specified.
Slag and visual — complete deslagging, no obvious slag lines, undercut, or porosity before NDT.
Typical Imperfections Linked to MMA Misuse
- Situation Likely issues
- Damp basic electrode Porosity, elevated hydrogen, delayed cracking risk
- Wrong polarity / current too low Poor fusion, convex cold bead, slag traps
- Current too high / arc too long Undercut, spatter, porosity, burn-through on thin material
- Incomplete slag removal Elongated slag inclusions between passes
- Cellulosic on crack-sensitive steel without controls Hydrogen cracks in weld or HAZ
- Summary for WTE/WIE Preparation
MMA remains highly examinable because it combines process physics, consumable metallurgy, and storage discipline . Know process 111 , coating functions, the behavioural contrast between basic / rutile / cellulosic , and the inspector’s role in electrode identity and dryness . Those points reappear when you later review WPS consumable tables and hydrogen cracking case studies.