Study guide
CGL Coverage A: Bodily Injury and Property Damage Liability
Illinois Property & Casualty Insurance Exam
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Illinois Property & Casualty Insurance Exam Overview
Illinois Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Illinois P&C Insurance Regulation & Licensing
1.1 Illinois Department of Insurance (DOI) 1.2 Illinois P&C Producer Licensing Requirements 1.3 License Maintenance and Continuing Education
22 Chapter 2: Illinois Property Insurance Laws
2.1 Illinois Homeowners Insurance Requirements 2.2 Illinois Commercial Property Insurance
23 Chapter 3: Illinois Casualty Insurance Laws
3.1 Illinois Auto Insurance Requirements 3.2 Illinois General Liability Insurance 3.3 Illinois Workers' Compensation Insurance
24 Chapter 4: Illinois P&C Insurance Ethics & Prohibited Practices
4.1 Unfair Trade Practices 4.2 Producer Conduct and Responsibilities 4.3 Illinois Insurance Guaranty Fund
CGL Coverage A: Bodily Injury and Property Damage Liability
Key Takeaways Explain This Topic AI
CGL Coverage A pays sums the insured is legally obligated to pay as damages for bodily injury or property damage caused by an occurrence in the coverage territory.
ISO CG 00 01 is the occurrence form (triggered by when injury happens); CG 00 02 is claims-made with a retroactive date and ERP/tail.
Typical limits: $2M General Aggregate, $2M Products-Completed Ops Aggregate, $1M Each Occurrence, $100K Damage to Premises, $5K Medical Payments.
The General Aggregate can cap an individual loss below its Each Occurrence limit once prior claims erode the pool.
Key exclusions include auto, workers compensation, expected/intended injury, pollution, and damage to your own product or work.
Last updated: June 2026
CGL Coverage A: Bodily Injury and Property Damage Liability
The Commercial General Liability (CGL) policy is built on standardized ISO forms. The most-tested base form is the Occurrence form CG 00 01 (current edition CG 00 01 04 13 ); the alternative is the Claims-Made form CG 00 02 . Coverage A pays sums the insured becomes legally obligated to pay as damages because of bodily injury (BI) or property damage (PD) to which the insurance applies, and gives the insurer the right and duty to defend . The duty to defend ends when the insurer has used up the applicable limit paying judgments or settlements.
The Coverage Trigger: "Occurrence" and "Coverage Territory"
Coverage A applies only when the BI or PD is caused by an occurrence — an accident , including continuous or repeated exposure to substantially the same harmful conditions. The injury or damage must take place in the coverage territory (US, its territories, Canada, and international waters/airspace in transit between them) and must occur during the policy period . On the occurrence form , the trigger is when the injury happens , no matter when the claim is filed — so a 2026 policy can still owe for a 2026 injury reported in 2031.
Occurrence vs. Claims-Made (a top exam trap)
Do not confuse the two triggers. The chart below is heavily tested:
- Feature Occurrence (CG 00 01) Claims-Made (CG 00 02)
- Trigger Injury happens during policy period Claim made during policy period
- Reporting Any time, even years later Generally during the period
- Retroactive date Not used Retroactive date caps how far back
- Tail coverage Not needed ERP / tail for late-reported claims
Claims-made adds a Retroactive Date (injury before it is excluded) and an Extended Reporting Period (ERP) — a basic 5-year automatic tail plus an optional supplemental unlimited tail bought by endorsement.
The Limits Structure (worked numbers)
The CG 00 01 declarations stack several limits. The General Aggregate is the most the insurer pays for the policy term (Coverage A + B + Medical Payments), except product/completed-operations losses, which erode the separate Products-Completed Operations Aggregate . Within the General Aggregate sits the Each Occurrence limit, and inside that the Damage to Premises Rented to You (fire legal) limit and the Medical Payments limit.
- General Aggregate: $2,000,000
- Products-Completed Ops Aggregate: $2,000,000
- Each Occurrence: $1,000,000
- Damage to Premises Rented to You: $100,000 (per premises)
- Medical Payments: $5,000 (per person)
Worked example — aggregate erosion
A contractor has a $2,000,000 General Aggregate and a $1,000,000 Each Occurrence limit. During the year three separate non-products claims pay $800,000 , $700,000 , and $900,000 .
Claim 1 pays $800,000 (under the $1M occurrence cap) → aggregate remaining $1,200,000 .
Claim 2 pays $700,000 → aggregate remaining $500,000 .
Claim 3 is valued at $900,000 but only $500,000 of aggregate is left, so the insurer pays $500,000 — even though the occurrence limit is $1M.
The lesson: an individual loss can be capped by the aggregate , not just the per-occurrence limit, once prior claims have eroded the pool.
The Insuring Agreement and the Duty to Defend
Coverage A promises to pay sums the insured becomes legally obligated to pay as damages for bodily injury or property damage caused by an occurrence within the coverage territory during the policy period. An occurrence is defined as "an accident , including continuous or repeated exposure to substantially the same general harmful conditions." Expected or intended injury is excluded — the policy covers negligence , not deliberate harm.
The insurer's duty to defend is broader than its duty to pay: it must defend any suit seeking covered damages even if the allegations are groundless, false, or fraudulent . Defense costs are paid in addition to the limits, and the duty ends once the applicable limit is exhausted by payment of judgments or settlements.
Coverage Territory and the Products-Completed Operations Hazard
Concept Definition
Coverage territory The U.S., its territories, Canada; worldwide for products made/sold in the territory and for the insured's traveling employees
Products-completed operations hazard BI/PD arising away from premises out of the insured's product or completed work
The products-completed operations exposure is critical because a contractor's faulty work can cause injury long after the job ends, and it draws against a separate aggregate . Recognizing that defense is outside the limits, that "occurrence" requires an accident, and that products-completed operations has its own aggregate explains the structure of nearly every Coverage A scenario the exam presents.
Premises-Operations vs. Products-Completed Operations
Coverage A bundles two distinct exposures. Premises and operations liability covers injury occurring at the insured's location or during ongoing work — a customer slipping in the store or being struck during an active job. Products-completed operations covers injury occurring away from the premises after work is finished or the product has left the insured's control . The two draw against different aggregates and are rated separately, which is why a contractor must confirm the products-completed operations aggregate is adequate for latent defects that surface after project completion.