Study guide
1.3 Legal Descriptions and Surveys
Illinois Real Estate Broker Exam
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
How This Guide Maps to the Illinois Salesperson Exam
2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use
1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances
3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title
2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording
4 National Portion: Chapter 3: Property Value & Appraisal
3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs
5 National Portion: Chapter 4: Real Estate Contracts & Agency
4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure
6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)
5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management
7 National Portion: Chapter 6: Property Disclosures & Environmental Issues
6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability
8 National Portion: Chapter 7: Financing & Settlement
7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations
9 National Portion: Chapter 8: Real Estate Math Calculations
8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math
10 Chapter 1: IDFPR & Licensing Requirements
1.1 Illinois Department of Financial and Professional Regulation 1.2 Illinois License Requirements 1.3 License Exemptions & Violations 1.4 Sponsorship & Employment
11 Chapter 2: Illinois Agency Law
2.1 Agency Relationships in Illinois 2.2 Fiduciary Duties 2.3 Brokerage Agreements 2.4 Commission & Compensation
12 Chapter 3: Illinois Contracts & Disclosures
3.1 Residential Real Property Disclosure 3.2 Lead Paint & Radon Disclosure 3.3 Purchase Contracts 3.4 Escrow & Trust Accounts
13 Chapter 4: Illinois Property Law & Fair Housing
4.1 Illinois Fair Housing Law 4.2 Property Ownership in Illinois 4.3 Illinois Landlord-Tenant Law 4.4 Taxes & Transfer Requirements
1.3 Legal Descriptions and Surveys
Key Takeaways Explain This Topic AI
The three accepted legal-description methods are metes-and-bounds, rectangular (government) survey, and lot-and-block (recorded plat).
Metes-and-bounds always begins and ends at the same point of beginning (POB); a description that does not close is defective.
In the rectangular survey system a township is 6 miles square (36 sq mi) and contains 36 sections; each section is 1 mile square = 640 acres.
An acre is 43,560 square feet; memorize it because most area math depends on it.
A street address is NOT a valid legal description; benchmarks and datum are used to describe elevation and air/subsurface rights.
Last updated: June 2026
Legal Descriptions and Surveys
A legal description identifies a parcel precisely enough that a surveyor can locate its exact boundaries. A mailing address or a tax-assessor parcel number is not a legal description. Three systems are accepted nationally.
1. Metes-and-bounds
The oldest method, used in the original colonies. It describes the parcel by metes (distances and compass directions) and bounds (boundaries and monuments). Every metes-and-bounds description:
Starts at a defined point of beginning (POB) ,
Traces each boundary by direction and distance (and references monuments such as "the old oak" or "the iron pin"),
Must return to the POB — the description must "close."
Trap: A description that ends at a different point than the POB is defective; the parcel does not close, and the description fails. Monuments (physical markers) generally control over recited distances if the two conflict.
2. Rectangular (government) survey system
Also called the public land survey system (PLSS) . It divides land using principal meridians (north-south lines) and base lines (east-west lines). Memorize the grid:
- Unit Size Contains
- Township 6 miles by 6 miles = 36 square miles 36 sections
- Section 1 mile by 1 mile = 1 square mile 640 acres
- Quarter section half mile by half mile 160 acres
- Acre 43,560 square feet —
Township lines run east-west and create tiers; range lines run north-south and create columns. Sections within a township are numbered 1 to 36 in a boustrophedonic (zigzag) pattern: Section 1 is the northeast corner, numbering runs west to Section 6, drops down, runs east, and so on, ending at Section 36 in the southeast corner.
Worked acreage math: "The NW 1/4 of the SE 1/4 of Section 8." Start with a 640-acre section. Multiply the fractions: 1/4 x 1/4 = 1/16. Then 640 / 16 = 40 acres . Shortcut: multiply all the denominators (4 x 4 = 16) and divide 640 by that product.
Second example: "The S 1/2 of the NW 1/4 of the NE 1/4." Denominators: 2 x 4 x 4 = 32. 640 / 32 = 20 acres .
Reading section fractions and combining acreage
The rectangular-survey questions almost always ask for acreage from a chain of fractions. The reliable method: multiply all the denominators, then divide 640 (acres in a section) by the product.
Worked example — combined tracts: "The N 1/2 of the SW 1/4 and the SE 1/4 of the SW 1/4 of Section 10."
First tract: N 1/2 of SW 1/4 → denominators 2 × 4 = 8 → 640 ÷ 8 = 80 acres .
Second tract: SE 1/4 of SW 1/4 → denominators 4 × 4 = 16 → 640 ÷ 16 = 40 acres .
Combined: 80 + 40 = 120 acres .
When a description joins parcels with "and," compute each piece separately, then add. When it nests with "of," multiply the denominators of the whole chain. Mixing these two operations is the most common arithmetic error on survey questions.
Township grid, correction lines, and conflicts
The public land survey system numbers townships by tier (north or south of a base line) and range (east or west of a principal meridian). A description like "Township 3 North, Range 2 West" (T3N, R2W) locates one 36-square-mile township on the grid.
Because meridians converge toward the poles, surveyors insert correction lines and guide meridians so townships stay close to six miles square; the leftover slivers create slightly undersized government lots , often along the north and west edges of a township.
Rule of priority when descriptions conflict: physical monuments (an iron pin, a river) control over courses and distances (bearings and footages), which control over area (the stated acreage). So if a deed says "to the old oak, 300 feet" but the oak is actually 290 feet away, the monument wins and the boundary runs to the oak.
Exam shortcut: Monuments beat measurements; measurements beat acreage. Memorize that hierarchy and most boundary-conflict questions answer themselves.