Study guide

12.3 Bonds, Insurance & Workers' Compensation

Illinois Roofing Contractor Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy

2 Safety: Fall Protection

1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors

3 Safety: Access & Equipment

2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics

4 Safety: PPE & Job Hazards

3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness

5 Preparation: Deck & Substrate

4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards

6 Preparation: Underlayment & Fasteners

5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics

7 Steep-Slope: Asphalt Shingles

6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details

8 Steep-Slope: Tile, Slate, Wood & Metal

7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)

9 Steep-Slope: Climate & Reroofing

8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules

10 Low-Slope: Bituminous Systems

9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations

11 Low-Slope: Single-Ply & SPF

10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing

12 Low-Slope: Drainage & Waterproofing

11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices

13 Illinois Law: Licensing Act

12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation

14 Illinois Law: Business Practices

13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education

15 Codes, Estimating & Business

14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics

16 Non-Residential Systems (Unlimited)

15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences

12.3 Bonds, Insurance & Workers' Compensation

Key Takeaways Explain This Topic AI

Limited licensees must submit a continuous bond of $10,000; Unlimited licensees must submit a continuous bond of $25,000

IDFPR insurance certification (RF-INS) requires property damage coverage of at least $250,000 and liability coverage of at least $500,000 per occurrence

Workers' compensation insurance covering roofing employees (or approved self-insurance) is required under the Act

Bond evidence is submitted on IDFPR BD forms (BD-LRF for Limited; BD-URF for Unlimited); do not alter form language

After exam passage, the IDFPR application fee is $125; the CTS exam fee is commonly about $248 and is separate from the Department application fee

Last updated: July 2026

12.3 Bonds, Insurance & Workers' Compensation

Quick Answer: Illinois roofing licensure requires financial responsibility. Post a $10,000 continuous bond for Limited or $25,000 for Unlimited. Certify insurance on RF-INS with at least $250,000 property damage and $500,000 liability coverage per occurrence, plus workers' compensation for employees. Use the correct BD bond form for your license type. After you pass the CTS exam (commonly about $248 ), submit the IDFPR license application with the $125 application fee and supporting documents.

Passing the trade/jurisprudence exam proves competence. Bonds and insurance prove you can stand behind that competence if something goes wrong. CTS Domain 5 tests the numbers and the forms.

Why Financial Responsibility Matters

The Act's public-protection purpose does not end at skills testing. Homeowners and businesses need recourse if a contractor fails to meet legal or contractual obligations. Surety bonds and liability insurance are statutory/regulatory tools that:

  • Discourage undercapitalized, hit-and-run operators
  • Provide a claim path when statutory conditions are met
  • Force applicants to demonstrate ongoing compliance as a condition of licensure and renewal

On the exam, connect every dollar amount back to that consumer-protection theme.

Surety Bonds

Under 225 ILCS 335, an applicant must submit a continuous bond to the Department in the amount of:

  • License type Required continuous bond
  • Limited $10,000
  • Unlimited $25,000

Key points to memorize:

  • The bond amount tracks license scope—Unlimited's broader authority comes with the higher bond
  • The bond must be continuous while the license remains active
  • The surety must be authorized to transact fidelity and surety business in Illinois
  • Bond language and submission follow IDFPR supporting-document rules
  • BD Forms

IDFPR uses dedicated bond supporting documents:

  • BD-LRF — Limited roofing contractor bond form
  • BD-URF — Unlimited roofing contractor bond form

Department instructions warn applicants not to change the language on the BD form. Incomplete, altered, or wrong-type bond forms are a common cause of application delays. For renewals as well as initial applications, submit the proper BD form completed by a bonding company licensed in Illinois.

Liability and Property Damage Insurance

The Act requires applicants to obtain public liability and property damage insurance in amounts and under circumstances determined by the Department. IDFPR operationalizes those minima on the insurance certification form.

RF-INS Minimums

Supporting Document RF-INS is the Department's accepted certification of liability and property damage insurance. On RF-INS, the applicant certifies holding at least:

  • Coverage Minimum amount
  • Property damage $250,000 for each occurrence of property damage
  • Liability (personal injury / bodily harm) $500,000 for each occurrence

Critical compliance details:

  • RF-INS must be properly completed and submitted with the license application or renewal package
  • IDFPR states that RF-INS is the proof of liability and property damage insurance the Department will accept
  • The applicant completes the applicant section; an authorized insurance agent completes the remainder
  • Coverage must remain in force; renewals and mid-cycle verification use the same documentation discipline

Do not confuse bond amounts with insurance amounts. A $10,000 or $25,000 bond is not a substitute for $250,000 / $500,000 insurance limits.

Workers' Compensation

An applicant must also show Workers' Compensation insurance covering the applicant's roofing employees, or approval as a self-insurer of workers' compensation in accordance with Illinois law.

Why this is heavily tested:

  • Roofing is a high-injury trade
  • The Act expressly lists workers' compensation among the evidentiary requirements for licensure

Exam scenarios may describe a contractor with liability insurance but no workers' compensation—that package is incomplete for employees

Sole proprietors without employees still need to understand the requirement because hiring even one employee changes the compliance picture. Always answer from the Act's employee-coverage rule rather than assumptions about "owner-only" operations unless the question clearly states facts that change the analysis.

Fees: Exam vs Application

Candidates often mix up who gets paid for what. Keep the streams separate:

  • Payment Typical amount Paid for / to
  • CTS qualifying-party exam About $248 Examination through the exam provider

IDFPR license application fee $125 License application to IDFPR after (or in connection with) meeting exam and document requirements

Notes for exam recall:

  • The $125 figure is the Department application fee associated with licensure paperwork to IDFPR
  • The CTS exam fee (commonly cited around $248 ) is separate and does not replace the IDFPR fee

Bond premiums and insurance premiums are additional business costs, not substitutes for either governmental/exam fee

Exact vendor fees can change over time; for CTS Illinois jurisprudence study, know the commonly tested figures and, more importantly, know that exam fees and IDFPR application fees are distinct.

Putting Documents Together

A complete financial-responsibility package for initial licensure typically includes:

  • Evidence the qualifying party passed the required exam
  • Correct continuous bond on BD-LRF or BD-URF
  • Completed RF-INS showing ≥ $250,000 property damage and ≥ $500,000 liability
  • Workers' compensation evidence (or approved self-insurance)
  • IDFPR application with the $125 fee and other required business information

Missing any one piece can stall licensure even after a strong exam score.

Common Exam Traps

Watch for these distractors:

  • Swapping Limited and Unlimited bond amounts ($10,000 vs $25,000)
  • Swapping insurance figures ($250,000 property damage vs $500,000 liability)
  • Claiming the bond alone satisfies insurance requirements
  • Forgetting workers' compensation when employees are present
  • Treating the CTS exam fee as the only payment needed for an Illinois license
  • Practical Study Drill

Say the package aloud until automatic:

"Limited ten thousand bond, Unlimited twenty-five thousand bond. RF-INS two-fifty property and five hundred liability. Workers' comp for employees. One twenty-five to IDFPR after the CTS exam."

That drill covers the majority of numeric jurisprudence items in this subsection.