Study guide
0.2 Application, CTS Registration & Exam Day
Illinois Roofing Contractor Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy
2 Safety: Fall Protection
1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors
3 Safety: Access & Equipment
2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics
4 Safety: PPE & Job Hazards
3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness
5 Preparation: Deck & Substrate
4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards
6 Preparation: Underlayment & Fasteners
5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics
7 Steep-Slope: Asphalt Shingles
6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details
8 Steep-Slope: Tile, Slate, Wood & Metal
7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)
9 Steep-Slope: Climate & Reroofing
8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules
10 Low-Slope: Bituminous Systems
9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations
11 Low-Slope: Single-Ply & SPF
10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing
12 Low-Slope: Drainage & Waterproofing
11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices
13 Illinois Law: Licensing Act
12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation
14 Illinois Law: Business Practices
13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education
15 Codes, Estimating & Business
14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics
16 Non-Residential Systems (Unlimited)
15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences
0.2 Application, CTS Registration & Exam Day
Key Takeaways Explain This Topic AI
Register with Continental Testing Services roughly one month ahead of a bimonthly Illinois roofing exam date; missed sittings have no make-up—you re-register for a later date.
CTS administers the competency exam; after a score of 70% or higher, you pursue the IDFPR licensure packet and pay the $125 IDFPR application fee with required bond and insurance evidence.
Retakes are allowed while credentials remain valid; failing candidates must re-schedule through CTS rather than assuming a same-cycle make-up seat.
Both Limited and Unlimited exams test Illinois jurisprudence under the Roofing Industry Licensing Act (225 ILCS 335) in addition to trade knowledge.
Exam-day success depends on bringing required identification, arriving early for CTS procedures, and managing time against the 90-minute (Limited/upgrade) or 150-minute (Unlimited) clocks.
Last updated: July 2026
Why Registration Discipline Matters
Illinois roofing exams are not daily walk-in CBT products in the same way some states offer continuous Pearson VUE seating. Continental Testing Services (CTS) runs Illinois roofing contractor examinations on a bimonthly date pattern. If you treat registration casually—waiting until the week of the exam, or assuming a missed date can be "made up" informally—you can lose an entire testing cycle, delay your IDFPR license application, and leave crews unable to pull permits under a properly licensed entity.
This section walks the path from deciding Limited versus Unlimited (or upgrade), through CTS registration, exam-day execution, scoring, retakes, and the handoff to IDFPR for the license itself.
- End-to-End Path: CTS Then IDFPR
- Keep the two agencies mentally separate: Decide license class (Limited / Unlimited / Upgrade)
- │
- ▼
- Register & pay exam fee with CTS (~$248 commonly cited)
- │
- ▼
- Sit exam on scheduled bimonthly CTS date
- │
- ▼
- Score ≥ 70% → receive pathway to licensure packet
- │
- ▼
- File IDFPR roofing contractor application ($125 fee)
- + bond + insurance + qualifying-party documentation
- │
- ▼
- IDFPR issues license when package is complete and compliant
CTS proves competency . IDFPR grants the license under the Illinois Roofing Industry Licensing Act (225 ILCS 335) once statutory and administrative requirements are met.
Bimonthly Dates and the One-Month Registration Habit
CTS historically schedules Illinois roofing exams on a bimonthly cadence (every other month). Exact dates and sites are published by CTS for each cycle—always verify the current bulletin rather than relying on a friend's memory from last year.
Practical registration rule taught for planning: register approximately one month ahead of your target date. That buffer covers:
Processing time for CTS eligibility and confirmation.
Travel planning if your assigned site is not local.
Final study block timed to the actual seat (not an open-ended "someday").
Avoiding a full-cycle slip if a date fills or your paperwork is incomplete.
No Make-Up If You Miss the Seat
If you are a no-show, arrive too late to be seated under CTS rules, or otherwise miss your scheduled examination, there is no make-up for that missed sitting. You must re-register for a subsequent bimonthly administration. Fees and policies for transfers versus forfeitures are controlled by CTS's published candidate rules for the cycle—do not assume a courtesy reschedule.
Exam scenario: You registered for the March CTS date but a crew emergency keeps you on a roof until evening. You cannot "take it next Saturday" as a make-up. You re-enter the CTS registration process for the next available bimonthly date.
What to Complete Before You Register
Before paying CTS, confirm:
Checkpoint Why It Matters
Correct exam form Limited (80Q/90 min), Unlimited (130Q/150 min), or Commercial & Industrial upgrade (80Q/90 min) only if you already hold Limited
Qualifying-party identity The person who will supervise and be day-to-day engaged must be the examinee
Study shelf started Act; NRCA Roofing Manual; NRCA Safety Manual; NASCLA Contractors Guide; Atcheson estimating
Calendar buffer ~1 month lead time before the published CTS date
Post-pass funding Plan for IDFPR $125 application fee plus bond premium and insurance meeting ≥$250,000 property damage / ≥$500,000 GL / workers' comp
Candidates sometimes pass CTS and then stall for months waiting on a bond or workers' compensation policy. Build those vendor relationships before exam day so the IDFPR package can move quickly after a passing score.
- Exam-Day Logistics
- Identification and Admission
Follow the CTS admission instructions for your authorization notice. Typically you must present government-issued photo identification that matches your registration name. Arrive early enough to complete check-in; late arrivals risk denial of seating with no make-up for that cycle.
Timing Discipline by Exam Form
- Exam Form Questions Clock Rough Pace
- Limited 80 90 minutes ~1.1 minutes per question
- Unlimited 130 150 minutes ~1.15 minutes per question
- Commercial & Industrial upgrade 80 90 minutes ~1.1 minutes per question
Mark difficult items and move on; unanswered questions help no one. Jurisprudence stems under 225 ILCS 335 can be wordy—budget time for reading carefully without burning the clock on a single scenario.
What Is and Is Not Allowed
CTS publishes prohibited-item and conduct rules for each administration. Expect standard secure testing controls: no unauthorized electronics, no sharing answers, and no leaving with exam content. Violations can void the sitting and create disciplinary exposure that follows you into the IDFPR phase.
Scoring, Licensure Packet, and the 70% Gate
A score of 70% or higher is required to obtain the documentation pathway commonly described as the licensure packet used to proceed with IDFPR . Below 70%, you do not advance to licensure on that attempt.
After a pass:
Retain CTS score documentation as instructed.
Complete the IDFPR roofing contractor application and pay the $125 application fee through the IDFPR form/process.
Attach evidence of the class-correct surety bond ($10,000 Limited / $25,000 Unlimited), property damage insurance ≥$250,000, GL ≥$500,000, and workers' compensation .
Ensure the qualifying party information matches the individual who tested and will remain day-to-day engaged.
Retakes While Credentials Remain Valid
Illinois roofing candidates may retake the exam while their testing credentials/authorization remain valid under CTS and related rules. Retakes are not unlimited forever without re-establishing eligibility—watch expiration dates on authorizations and any CTS notices.
Practical retake habits:
Diagnose weak blueprint domains (see section 0.3) using your score report categories when available.
Re-register early enough to catch the next bimonthly date (~1 month lead).
Do not assume a failed March sitting automatically rolls to May without a new registration action.
Jurisprudence Reminder for Exam Day
Both Limited and Unlimited examinations include Illinois jurisprudence related to roofing under the Act. Exam-day preparation is not only product knowledge (shingles, membranes, flashings). Expect items on licensing classes, qualifying-party duties, and regulatory obligations that flow from 225 ILCS 335 . Upgrade examinees should also expect Non-Residential system weight that Limited candidates do not see at the same blueprint intensity (detailed in 0.3).
Exam Scenarios You Should Rehearse
Scenario A — Late registration: A candidate tries to register five days before a CTS date and finds the administration closed. Outcome: wait for the next bimonthly cycle; the one-month planning habit exists to prevent this.
Scenario B — Pass then stall: A candidate scores 72% on Unlimited but delays IDFPR filing because the $25,000 bond is not yet secured. Outcome: still not licensed to contract; CTS pass alone is incomplete.
Scenario C — Wrong form: A Limited licensee registers for full Unlimited out of confusion instead of the Commercial & Industrial upgrade. Outcome: still a valid path to Unlimited if they pass, but they accepted a longer 130-question / 150-minute exam when an 80/90 upgrade seat may have been available—confirm eligibility before paying.
Scenario D — Missed seat: A candidate oversleeps and misses check-in. Outcome: no make-up; re-register for a later CTS date.
Checklist the Night Before
Confirm CTS date, time, and site from your authorization.
Pack required ID; set two alarms; plan travel buffer.
Review Limited/Unlimited/upgrade timing and 70% pass rule.
Skim Act-based jurisprudence notes (qualifying party, license scope, bond concepts).
Ready post-pass documents list: IDFPR $125 fee path, bond, insurance certificates, workers' comp.
Treat registration and exam day as a professional operations problem , not a casual appointment. Contractors who manage CTS timing the way they manage material deliveries pass and license faster.