Study guide

0.3 Blueprint Weights & Study Strategy

Illinois Roofing Contractor Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy

2 Safety: Fall Protection

1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors

3 Safety: Access & Equipment

2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics

4 Safety: PPE & Job Hazards

3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness

5 Preparation: Deck & Substrate

4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards

6 Preparation: Underlayment & Fasteners

5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics

7 Steep-Slope: Asphalt Shingles

6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details

8 Steep-Slope: Tile, Slate, Wood & Metal

7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)

9 Steep-Slope: Climate & Reroofing

8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules

10 Low-Slope: Bituminous Systems

9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations

11 Low-Slope: Single-Ply & SPF

10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing

12 Low-Slope: Drainage & Waterproofing

11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices

13 Illinois Law: Licensing Act

12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation

14 Illinois Law: Business Practices

13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education

15 Codes, Estimating & Business

14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics

16 Non-Residential Systems (Unlimited)

15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences

0.3 Blueprint Weights & Study Strategy

Key Takeaways Explain This Topic AI

CTS weights six domains differently for Limited, Unlimited, and Commercial & Industrial upgrade—Non-Residential Roofing Systems is 0 on Limited but 15 on Unlimited and upgrade.

Safety & Employee Protection is the single largest Limited domain (25) and remains major on Unlimited (25) and upgrade (15).

Steep-Slope Roofing Systems carries heavy Unlimited weight (35) and strong Limited weight (20); low-slope and non-residential weights rise for Unlimited/upgrade candidates.

Allocate study hours to blueprint counts, not gut feel: Unlimited candidates must add commercial/industrial system depth that Limited candidates can de-emphasize.

Anchor study to the Act, NRCA Roofing Manual, NRCA Safety Manual, NASCLA Contractors Guide, and Atcheson estimating, then drill weak domains before the bimonthly CTS date.

Last updated: July 2026

Why Blueprint Weights Drive Your Hours

Illinois roofing candidates who study "everything equally" underperform. Continental Testing Services (CTS) publishes domain weights that differ for Limited , Unlimited , and the Commercial & Industrial upgrade . A Limited candidate who spends weeks on Non-Residential systems is optimizing for questions that are not on their exam (Limited weight 0 ). An Unlimited candidate who ignores Non-Residential or under-studies steep-slope is leaving the largest point blocks on the table.

This section translates the CTS blueprint into a concrete study strategy tied to Illinois licensing reality under IDFPR and the Roofing Industry Licensing Act (225 ILCS 335) .

Official Domain Weights (Limited / Unlimited / Upgrade)

Memorize this table; it is the spine of section 0.3:

  • # Domain Limited Unlimited Upgrade (C&I)
  • 1 Safety & Employee Protection 25 25 15
  • 2 Roofing Preparation & Materials 12 20 10
  • 3 Steep-Slope Roofing Systems 20 35 15
  • 4 Low-Slope Roofing Systems 8 15 10
  • 5 Rules, Regulations & Business Practices 15 20 15
  • 6 Non-Residential Roofing Systems 0 15 15
  • Total questions 80 130 80

Cross-check: Limited 25+12+20+8+15+0 = 80 . Unlimited 25+20+35+15+20+15 = 130 . Upgrade 15+10+15+10+15+15 = 80 .

  • Domain-by-Domain Teaching Notes
  • 1. Safety & Employee Protection (25 / 25 / 15)

Safety is the largest Limited domain and tied for the lead on Unlimited. Expect fall protection, ladders/scaffolds, material handling, heat/kettle and torch hazards where applicable, PPE, and jobsite employee-protection practices aligned with materials such as the NRCA Safety Manual . Upgrade candidates still see 15 safety items—enough to fail if ignored.

Study move: Build a safety drill set every week until exam week. Do not save OSHA-style and NRCA safety topics for the final two days.

2. Roofing Preparation & Materials (12 / 20 / 10)

Deck assessment, tear-off decisions, underlayments, fasteners, insulation, and material compatibility live here. Unlimited raises this domain to 20 , reflecting broader material systems across building types. Use the NRCA Roofing Manual and manufacturer-neutral preparation sequences; pair with Atcheson estimating habits so quantity takeoffs and waste factors do not surprise you on applied items.

3. Steep-Slope Roofing Systems (20 / 35 / 15)

Steep-slope is a career bread-and-butter domain for residential work and a massive Unlimited block (35 questions) . Shingles, flashing, valleys, ridges, ventilation interfaces, and steep-slope repair/reroof logic dominate. Limited's 20 questions already exceed low-slope's 8 —residential-focused candidates still must be steep-slope strong.

4. Low-Slope Roofing Systems (8 / 15 / 10)

Membranes, built-up concepts, modified bitumen families, drainage awareness, and low-slope flashing principles appear with modest Limited weight but grow on Unlimited ( 15 ) and upgrade ( 10 ). If you only install shingles today, you still need enough low-slope literacy to clear these items—especially on Unlimited.

5. Rules, Regulations & Business Practices (15 / 20 / 15)

This is where Illinois jurisprudence under 225 ILCS 335 , licensing classes, qualifying-party duties, contracting practices, and business-rule judgment items concentrate. Unlimited weights this at 20 . Pair the Act with the NASCLA Contractors Guide for business-practice framing, while keeping answers Illinois-specific (IDFPR/CTS facts from sections 0.1–0.2).

6. Non-Residential Roofing Systems (0 / 15 / 15)

Limited = 0. Do not burn Limited study calendar on deep commercial/industrial assemblies beyond what overlaps other domains. Unlimited and upgrade = 15 each. Commercial and industrial system knowledge is a dedicated scoring block for those seats—treat it as a full mini-course, not a footnote.

  • Study-Hour Allocation Models
  • Limited Candidate (80 questions / 90 minutes)

Approximate proportional hours for a 40-hour study plan:

  • Domain Blueprint Q Suggested share of 40 hours
  • Safety & Employee Protection 25 ~12–13 hours
  • Steep-Slope Roofing Systems 20 ~10 hours
  • Rules, Regulations & Business Practices 15 ~7–8 hours
  • Roofing Preparation & Materials 12 ~5–6 hours
  • Low-Slope Roofing Systems 8 ~4 hours
  • Non-Residential Roofing Systems 0 0 hours dedicated
  • Unlimited Candidate (130 questions / 150 minutes)

For a 60-hour study plan, weight toward steep-slope ( 35 ) and safety ( 25 ), then regulations ( 20 ), preparation ( 20 ), and split remaining time across low-slope ( 15 ) and non-residential ( 15 ). Unlimited is not "Limited plus a little"—it is a longer exam with commercial/industrial depth and heavier steep-slope demand.

Upgrade Candidate (80 questions / 90 minutes)

You already proved residential Limited competence. Reallocate toward Non-Residential (15) , keep Safety (15) and Rules (15) sharp, and use steep-slope/low-slope/preparation weights (15/10/10) to close commercial gaps without replaying your entire Limited curriculum from zero.

Official Reference Shelf

Anchor reading—not random YouTube playlists—as your source of truth:

Illinois Roofing Industry Licensing Act (225 ILCS 335) — jurisprudence and licensing structure.

NRCA Roofing Manual — systems, preparation, steep- and low-slope practice.

NRCA Safety Manual — employee protection and jobsite safety.

NASCLA Contractors Guide — business practices and contracting frameworks.

Atcheson estimating references — quantities, waste, and estimating judgment.

When a practice explanation conflicts with these sources, prefer the official shelf and Illinois statute over informal tips.

Four-Week Sprint Before a Bimonthly CTS Date

Assuming you registered ~ one month ahead:

Week 1 — Blueprint map & safety foundation. Memorize the weight table. Complete safety modules; start Act/jurisprudence notes (qualifying party, Limited vs Unlimited scope, bond/insurance prerequisites).

Week 2 — Steep-slope + preparation. Drive steep-slope reps hard (especially Unlimited). Layer underlayment, deck, and materials items from NRCA.

Week 3 — Low-slope + non-residential (as applicable) + business rules. Limited: modest low-slope + heavy rules practice. Unlimited/upgrade: full non-residential block + low-slope expansion + rules.

Week 4 — Mixed timed sets & weak-domain repair. Simulate 90- or 150-minute pacing. Log misses by domain number (1–6). Re-drill only the domains that actually cost points.

Exam Scenarios Tied to Weights

Scenario 1: A Limited candidate spends half their study time on plaza-deck waterproofing and industrial metal panel systems tagged as Non-Residential. Diagnosis: Misallocated hours; Limited Non-Residential weight is 0 . Redirect to Safety (25) and Steep-Slope (20).

Scenario 2: An Unlimited candidate is excellent on shingles but blanks membrane attachment and commercial flashing details. Diagnosis: Low-Slope (15) and Non-Residential (15) together equal 30 questions—ignore them and you can fail despite strong steep-slope performance.

Scenario 3: An upgrade candidate skips safety because "I already passed Limited." Diagnosis: Upgrade still includes 15 Safety items; complacency is a scoring leak.

Scenario 4: A candidate knows products cold but cannot explain qualifying-party duties or Limited's 8-unit residential scope. Diagnosis: Rules/Regulations domain (15–20) will punish trade-only studying.

Integrating Strategy With Sections 0.1 and 0.2

Pick the correct exam form first (0.1)—weights differ.

Register ~ one month out on the bimonthly CTS calendar (0.2)—your four-week sprint needs a fixed end date.

Pass at 70% , then complete IDFPR filing ($125, bond, insurance) so study effort converts into a license, not just a score report.

Closing Study Rules

Hours follow counts —Safety and Steep-Slope first for most seats.

Limited ignores dedicated Non-Residential ; Unlimited/upgrade do not.

Jurisprudence is scored —Act literacy is not optional fluff.

Timed mixed practice in the final week beats passive rereading.

Official references beat unverified shortcuts.

Use the blueprint as a budget. Every study hour should have a domain number attached, or you are guessing.