Study guide
11.2 Waterproofing & Dampproofing
Illinois Roofing Contractor Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy
2 Safety: Fall Protection
1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors
3 Safety: Access & Equipment
2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics
4 Safety: PPE & Job Hazards
3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness
5 Preparation: Deck & Substrate
4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards
6 Preparation: Underlayment & Fasteners
5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics
7 Steep-Slope: Asphalt Shingles
6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details
8 Steep-Slope: Tile, Slate, Wood & Metal
7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)
9 Steep-Slope: Climate & Reroofing
8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules
10 Low-Slope: Bituminous Systems
9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations
11 Low-Slope: Single-Ply & SPF
10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing
12 Low-Slope: Drainage & Waterproofing
11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices
13 Illinois Law: Licensing Act
12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation
14 Illinois Law: Business Practices
13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education
15 Codes, Estimating & Business
14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics
16 Non-Residential Systems (Unlimited)
15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences
11.2 Waterproofing & Dampproofing
Key Takeaways Explain This Topic AI
Waterproofing resists hydrostatic pressure and continuous water exposure; dampproofing only resists soil moisture vapor and incidental dampness—never substitute dampproofing where waterproofing is required
Plaza decks, buried roofs, and below-grade walls that can hold water need true waterproofing membranes with protection courses and drainage composites
Below-grade dampproofing is typically a thinner coating on foundation walls where no hydrostatic head is expected; Illinois clay soils and high water tables often push designs toward waterproofing instead
Horizontal waterproofing under pavers or vegetative overburden must include drainage planes, protection boards, and detailing at drains, planters, and wall interfaces
Illinois freeze-thaw and deicing salts attack unprotected membranes and flashings—protection, drainage, and terminations are as important as the membrane product itself
Last updated: July 2026
11.2 Waterproofing & Dampproofing
Exam Focus: Do not confuse waterproofing with dampproofing. Licensing questions often test whether a plaza deck, buried roof, or foundation wall needs a system that can handle standing water and hydrostatic pressure—or only a moisture-retardant coating.
Two Different Jobs Against Water
Roofing contractors in Illinois increasingly work at the edge of traditional “roof” scope: plaza decks over occupied space, green roofs , parking decks , and tie-ins to below-grade foundation waterproofing. The materials may look similar (sheets, fluids, asphaltic coatings), but the design intent splits cleanly:
System Resists Typical use Fails when…
Waterproofing Hydrostatic pressure and continuous or intermittent immersion Plaza decks, split-slab decks, buried roofs, foundation walls with water head Used as thin dampproof paint under a high water table
Dampproofing Soil moisture and vapor; incidental dampness without hydrostatic head Exterior of basement walls in well-drained sites Asked to hold ponded water or pressurized groundwater
Hydrostatic pressure is the force of water standing against a surface. A saturated clay backfill against a Chicago basement wall, or water trapped on a plaza membrane under pavers, creates hydrostatic (or near-hydrostatic) conditions. Dampproofing is not formulated or detailed for that load.
Dampproofing in Practice
Dampproofing is commonly a asphalt emulsion, coal-tar emulsion (historic), or similar coating applied to the exterior of concrete or masonry foundation walls. It may be sprayed or brushed in one or more coats. Its purpose is to slow moisture vapor and dampness migrating from soil into the wall—not to create a bathtub.
Illinois field realities:
Many older residential foundations in the Chicago suburbs received only dampproofing. Where perimeter drains fail or clay soil holds water, those walls wet despite the coating.
Building codes and geotechnical reports determine when dampproofing is allowed versus when waterproofing is mandatory. High water tables, poorly draining soils, and occupied spaces below grade push the design toward waterproofing.
Dampproofing is generally not appropriate as the sole barrier on a horizontal buried roof or plaza that can pond.
If an exam item describes “coating to resist soil dampness with no hydrostatic pressure,” the answer is dampproofing. If it describes “membrane for a plaza over retail with drains and pavers,” the answer is waterproofing.
Waterproofing Assemblies for Plazas and Buried Roofs
A plaza deck or buried roof places living, planted, or paved overburden above a waterproofing membrane that protects interior space. Typical assembly layers (bottom to top, simplified):
Structural deck — Often concrete; must be clean, cured, and properly sloped or provided with drainage.
Primer / vapor considerations — Per manufacturer; substrate moisture limits matter in Illinois humid summers.
Waterproofing membrane — Hot-applied rubberized asphalt, torch or adhesive sheet membranes, PVC/TPO specialty waterproofing sheets, or fluid-applied systems rated for the use.
Protection course — Board or sheet that shields the membrane from construction traffic and overburden.
Drainage layer — Dimple mats, drainage composites, or gravel that moves water horizontally to drains.
Insulation (if required) — Extruded polystyrene is common under plazas because it tolerates moisture better than many roof boards.
Overburden — Pavers on pedestals, concrete topping, soil and plants, or vehicular topping as designed.
Drainage Is Still Mandatory
Waterproofing does not excuse ponding on the membrane. Water should flow in the drainage layer to deck drains that are detailed as waterproofing penetrations—clamping rings, proprietary drain assemblies, or carefully flashed sumps. On Illinois plazas, freeze-thaw heaving of poorly drained fill and ice lensing under pavers are classic failure modes when the drainage composite is omitted or crushed.
Vertical-to-Horizontal Transitions
Where a plaza meets a building wall, the membrane must turn up and terminate above the wearing surface, often with a reglet , termination bar, and counterflashing. Wall waterproofing and deck waterproofing must be sequenced so water sheds out and down—not into the joint. These tie-ins are among the highest leak-risk details on mixed-use projects in downtown and suburban Illinois markets.
Below-Grade Waterproofing vs. Roofing Mindset
Below-grade walls use sheet-applied, fluid-applied, or blind-side (pre-applied) waterproofing against lagging. Roofing crews may install or tie into these systems at the foundation-to-roof interface on additions and podium buildings. Key contrasts with exposed roofing:
Protection — Backfill will puncture unprotected membranes; protection board is mandatory.
Drainage boards and footing drains — Relieve hydrostatic pressure; waterproofing works with drainage, not instead of it.
Quality control — Flood testing or electronic leak detection is common on horizontal waterproofing before overburden is placed. Once soil or topping is down, repairs become demolition.
NRCA and waterproofing manufacturers emphasize test before cover . Illinois winters shorten the safe window for flood tests (freezing water), so schedule testing in appropriate weather or use approved alternate methods.
Illinois Climate Stressors
Freeze-thaw — Water in voids expands; membranes need flexibility and full adhesion or properly designed loose-laid systems with ballast/overburden per approval.
Deicing salts — Attack concrete toppings and can migrate to flashings; specify resistant details at entries and garage plazas.
Clay soils — Hold water against foundations; dampproofing-alone designs are risky without functioning perimeter drainage.
Product Selection Reminders
Always match the membrane to exposure (buried vs. exposed), chemical resistance , movement joints , and warranty requirements. A roofing-grade TPO detail is not automatically a plaza waterproofing detail. Conversely, a foundation dampproof coating is never a substitute for a plaza waterproofing membrane.
On the Exam
Separate the words: dampproofing = moisture/vapor without hydrostatic head; waterproofing = water under pressure or continuous exposure. Plaza and buried roofs need waterproofing plus drainage and protection. When in doubt on an occupied deck over interior space, choose the waterproofing assembly path.