Study guide
3.4 Asbestos, Silica, Lead & Heat Illness
Illinois Roofing Contractor Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy
2 Safety: Fall Protection
1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors
3 Safety: Access & Equipment
2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics
4 Safety: PPE & Job Hazards
3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness
5 Preparation: Deck & Substrate
4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards
6 Preparation: Underlayment & Fasteners
5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics
7 Steep-Slope: Asphalt Shingles
6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details
8 Steep-Slope: Tile, Slate, Wood & Metal
7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)
9 Steep-Slope: Climate & Reroofing
8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules
10 Low-Slope: Bituminous Systems
9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations
11 Low-Slope: Single-Ply & SPF
10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing
12 Low-Slope: Drainage & Waterproofing
11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices
13 Illinois Law: Licensing Act
12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation
14 Illinois Law: Business Practices
13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education
15 Codes, Estimating & Business
14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics
16 Non-Residential Systems (Unlimited)
15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences
3.4 Asbestos, Silica, Lead & Heat Illness
Key Takeaways Explain This Topic AI
Older Illinois roofs may contain asbestos in felts, flashings, mastics, and coatings—disturbance can require licensed identification/abatement controls before tear-off proceeds.
Cutting concrete tile, pavers, or masonry without dust controls creates respirable crystalline silica; use wet methods, local exhaust, and respirators per OSHA’s silica standard.
Lead in flashings and old paints is regulated; grinding or torching lead-bearing materials can generate hazardous dust and fume under OSHA’s lead in construction rule.
Illinois summer heat and humidity drive heat illness risk—plan water, rest, shade, and acclimatization; cold weather still demands layered clothing and awareness of hypothermia/frostbite on exposed roofs.
Last updated: July 2026
3.4 Asbestos, Silica, Lead & Heat Illness
Quick Answer: Suspect asbestos on pre-1980s built-up and coating systems before aggressive tear-off; control silica when cutting concrete/tile; treat lead flashings and paints as regulated metals; and build heat-illness prevention into every Illinois summer roof schedule (with cold-weather awareness in winter).
Not every exam hazard is a fall or a flame. Long-latency disease agents and weather extremes appear throughout Illinois licensing content because roofers encounter them weekly on reroofs and tear-offs.
Asbestos on Older Roofs
Asbestos was widely used in roofing felts, flashings, silver coatings, mastics, and cementitious products. Many Illinois buildings constructed or reroofed decades ago may still hide asbestos-containing materials (ACM). Disturbing ACM—ripping felts, grinding flashings, dry sweeping debris—can release fibers that cause asbestosis, lung cancer, and mesothelioma years later.
Competent approach before tear-off:
- Step Action
- 1 Review building age, prior roof types, and any existing asbestos surveys
- 2 Assume suspect materials may contain asbestos until tested
- 3 Use accredited inspection/lab analysis when required
4 If ACM will be disturbed, follow EPA/Illinois/OSHA rules—often meaning licensed abatement, wet methods, PPE, and regulated-area controls
5 Never dry-sweep or use compressed air on asbestos debris
Roofing contractors who “just tear it off” without due diligence risk worker exposure, illegal disposal, and project shutdowns. Exam questions often test recognition (“black mastic on a 1960s school roof”) and the principle that identification precedes demolition .
Respirable Crystalline Silica
Concrete roof tile, clay tile cutting that hits concrete accessories, paver systems, masonry parapet work, and cutting cement board all can generate respirable crystalline silica . Silica causes silicosis and elevates lung cancer risk. OSHA’s silica standard for construction requires employers to:
- Assess tasks or follow Table 1-style specified exposure control methods where applicable
- Use wet cutting , vacuum dust collection with appropriate filters, or other engineering controls
- Provide respirators when controls are insufficient or as specified
- Limit dry sweeping and compressed-air cleanup of silica dust
- Train workers and keep exposure records as required
On a residential tile job in the Chicago suburbs, a cutoff saw without water or shroud can overexpose a cutter in minutes. Housekeeping matters: dry brooming silica dust off the roof onto landscaping spreads the hazard. Prefer HEPA vacuums and wet methods.
Lead Flashings & Paint
Lead-coated copper, lead flashing pieces, and lead-based paints on older metal edges or rooftop equipment still appear on Illinois tear-offs. OSHA’s lead in construction standard (29 CFR 1926.62) sets an action level and PEL for airborne lead and requires exposure assessment for triggering tasks such as grinding, sanding, welding, or torching lead-containing materials.
Practical controls:
Identify lead-suspect materials before aggressive mechanical or hot work
Prefer methods that minimize dust and fume; avoid uncontrolled torching of lead-coated metals when safer removal exists
- Use PPE and hygiene—no eating in the dust zone; wash before breaks
- Contain debris for proper disposal; do not take lead dust home on clothing
Even “small” flashing details can create high local exposures when ground indoors at a shop or torched in a courtyard with poor air movement.
Heat Illness Prevention in Illinois Summers
Illinois summers combine high temperatures with Midwest humidity, raising heat index values that stress roofers on black membranes and sun-exposed decks. Heat illness progresses from heat rash and cramps to heat exhaustion and life-threatening heat stroke.
Condition Warning signs Immediate response
Heat exhaustion Heavy sweating, weakness, nausea, headache, dizziness Rest in shade/cool area, hydrate, cool the body, stop work
Heat stroke Confusion, fainting, hot skin, possible lack of sweating Medical emergency —cool aggressively and call emergency services
Prevention program elements:
- Provide cool drinking water and encourage frequent intake
- Schedule heavy tear-off for cooler hours when feasible
- Mandatory rest/shade breaks; use canopies on large open roofs
- Acclimatize new or returning workers over several days
- Buddy system to watch for confusion or unusual behavior
- Adjust expectations during heat advisories common across Illinois in July–August
Dark clothing, incomplete hydration, and “push through lunch” culture cause many incidents. Supervisors should know emergency routes from commercial roofs and residential sites alike.
Cold Weather (Brief)
Winter and shoulder-season work still happens on Illinois roofs. Cold stress risks include frostbite on exposed fingers/ears and hypothermia when wind cuts across open decks. Layer moisture-wicking clothing, keep gloves dry when possible, warm up in vehicles on timed breaks, and watch for impaired dexterity that increases fall and tool injuries. Clear ice carefully without creating silica-like dust storms from aggressive dry scraping of cementitious residues when those hazards also apply. Hot coffee alone is not a cold-stress program—schedule shorter exposure periods when wind chill is severe and keep a dry glove change available for kettle and fastener work.
Integrating Health Hazards Into the Job Plan
A competent Illinois roofing contractor screens the building for asbestos and lead, plans silica controls for any cutting, stages water/shade for heat, and briefs the crew before tear-off day—not after someone is already overexposed. That planning mindset is exactly what licensing exams try to measure.