Study guide

8.3 Steep-Slope Reroofing & Overlay Rules

Illinois Roofing Contractor Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 Current Exam Facts: Limited vs Unlimited 0.2 Application, CTS Registration & Exam Day 0.3 Blueprint Weights & Study Strategy

2 Safety: Fall Protection

1.1 OSHA Fall Protection Trigger Heights & Hierarchy 1.2 Personal Fall Arrest Systems 1.3 Guardrails, Warning Lines & Safety Monitors

3 Safety: Access & Equipment

2.1 Ladder Safety for Roofing 2.2 Scaffolding, Roof Brackets & Staging 2.3 Hoists, Material Handling & Crane Basics

4 Safety: PPE & Job Hazards

3.1 PPE Requirements for Roofers 3.2 Fire Safety, Hot Work & Kettle Operations 3.3 Hazard Communication, SDS & Chemical Risks 3.4 Asbestos, Silica, Lead & Heat Illness

5 Preparation: Deck & Substrate

4.1 Roof Deck Types & Inspection 4.2 Tear-Off, Re-Roof Prep & Substrate Repair 4.3 Rigid Board Insulation & Cover Boards

6 Preparation: Underlayment & Fasteners

5.1 Underlayment Types & Ice/Water Shield (Illinois) 5.2 Fasteners, Attachment Patterns & Corrosion 5.3 Moisture Control, Vapor Retarders & Ventilation Basics

7 Steep-Slope: Asphalt Shingles

6.1 Asphalt Shingle Types, Ratings & Installation 6.2 Valleys, Hips, Ridges & Starter Courses 6.3 Steep-Slope Flashing Details

8 Steep-Slope: Tile, Slate, Wood & Metal

7.1 Concrete & Clay Tile Systems 7.2 Slate Roofing 7.3 Wood Shingles & Shakes 7.4 Architectural & Structural Metal (Steep)

9 Steep-Slope: Climate & Reroofing

8.1 Attic Ventilation & Condensation Control 8.2 Ice Dams & Cold-Climate Detailing (Illinois) 8.3 Steep-Slope Reroofing & Overlay Rules

10 Low-Slope: Bituminous Systems

9.1 Built-Up Roofing (BUR) Systems 9.2 Modified Bitumen (APP & SBS) 9.3 Low-Slope Flashing, Edges & Terminations

11 Low-Slope: Single-Ply & SPF

10.1 EPDM Systems & Details 10.2 TPO & PVC Single-Ply Systems 10.3 Spray Polyurethane Foam (SPF) Roofing

12 Low-Slope: Drainage & Waterproofing

11.1 Drainage, Ponding & Roof Slope Design 11.2 Waterproofing & Dampproofing 11.3 Low-Slope Repair & Maintenance Practices

13 Illinois Law: Licensing Act

12.1 Illinois Roofing Industry Licensing Act Overview 12.2 Limited vs Unlimited Licenses & Qualifying Party 12.3 Bonds, Insurance & Workers' Compensation

14 Illinois Law: Business Practices

13.1 Contracts, Advertising & License Display 13.2 Mechanics Liens & Consumer Protections (Illinois) 13.3 Discipline, Penalties & Continuing Education

15 Codes, Estimating & Business

14.1 Building Codes, Permits & Fire/Energy Requirements 14.2 Estimating: Pitch Factors, Areas & Waste 14.3 NASCLA Business Law & Project Management Basics

16 Non-Residential Systems (Unlimited)

15.1 Commercial Roof System Selection 15.2 Structural Loads, Fire Ratings & Energy Code 15.3 Industrial & Specialty Roofing Systems 15.4 Unlimited Upgrade Path & Exam Differences

8.3 Steep-Slope Reroofing & Overlay Rules

Key Takeaways Explain This Topic AI

Overlays (recover) are allowed only when the existing roof and deck meet code and manufacturer limits—often a maximum of two layers of asphalt shingles

Full tear-off is required when the deck is damaged, wet, warped, or when layer limits, wet insulation, or irregular surfaces prevent a code-compliant recover

After tear-off, inspect and repair sheathing before underlayment—Illinois weather can hide decay at eaves, valleys, and north slopes

Manufacturer installation instructions and local amendments can be stricter than a generic “two-layer” rule and control warranty eligibility

  • Reroofing is the moment to correct ventilation, baffles, and ice-and-water shield that the old roof lacked
  • Last updated: July 2026

Reroofing is where steep-slope theory meets jobsite economics. Property owners ask for the cheapest second layer; manufacturers and codes ask whether the existing roof can legally and safely accept another covering. In Illinois, freeze–thaw, ice dams, and humid summers mean many “simple overlays” hide soft decking at eaves and valleys. Exam candidates must know when recover is allowed, when tear-off is mandatory, and what inspection steps follow once the old roof is gone.

Overlay (Recover) Versus Full Tear-Off

An overlay (also called a recover) installs a new steep-slope covering over an existing one without removing all prior layers to the deck. A full tear-off removes existing roof coverings down to the sheathing so the deck can be inspected, repaired, and detailed with new underlayment and flashings.

Overlays can reduce labor and disposal cost when conditions are ideal. They also add weight, can trap moisture, hide decay, and leave failed flashings in place. Tear-off costs more up front but reveals the truth about the deck and allows correct ice-and-water shield, drip edge, and ventilation corrections that Illinois roofs often need.

When Overlay May Be Allowed

Recover is a conditional permission, not a default right. Typical constraints—always verify the adopted code edition, local amendments, and the new shingle manufacturer’s written instructions—include:

Existing roof is structurally sound and essentially smooth, without cupped, brittle, or missing shingles that prevent uniform nailing

  • Deck remains sound—no soft spots, delamination, or widespread fastener withdrawal
  • Layer limits are respected (commonly no more than two asphalt shingle layers total after the recover)
  • Roof slope and product remain within the new covering’s approved applications

Flashings can be made weathertight; often step flashing and counterflashing still need selective replacement even on recovers

Ventilation and moisture conditions will not trap water between layers

Condition Overlay usually OK? Preferred action

One smooth, dry asphalt layer on sound deck; manufacturer allows recover Possibly yes Confirm two-layer max and nail length through existing layer into deck

  • Already two asphalt layers No Full tear-off
  • Soft, wet, or fire-damaged sheathing No Tear-off, repair/replace deck

Heavy ice-dam leakage history at eaves Rarely wise Tear-off to install proper eave membrane and fix attic heat loss

  • Uneven wood shakes/slate to receive asphalt Usually no Tear-off or specialty system per manufacturer
  • Bubbled underlayment / saturated deck smell No Tear-off and dry/repair

Nail length on overlays must penetrate the new shingle, pass through the existing layer(s), and achieve the required embedment into the deck. Short nails that stop in the old shingles are a classic recover failure mode.

Layer Limits and Manufacturer Constraints

Many jurisdictions effectively cap asphalt shingle roofs at two layers . A third layer is typically prohibited because of dead load, uneven surfaces, and inability to inspect the deck. Even when a local code might seem permissive, manufacturer instructions control warranty and are often incorporated into code compliance. If the shingle wrapper says “apply only to a clean deck” or “maximum one overlay,” that instruction governs the job you are installing.

Other manufacturer and code constraints that block casual overlays:

  • Prohibitions on recovering over saturated or curled roofs
  • Limits on recovering over insulated roof assemblies that need drying
  • Requirements to replace drip edge, valleys, and wall flashings rather than bury them
  • Specific underlayment and ice-barrier rules for cold climates that assume deck-level installation
  • Wind-warranty nailing patterns that cannot be achieved through irregular old surfaces

Illinois wind and winter events make “fasten through junk” a poor bet. When in doubt, tear off.

Mandatory Tear-Off Triggers

Plan a full tear-off when any of the following appear:

  • Existing roof already at the maximum layer count
  • Soft, spongy, delaminated, or mold-stained sheathing
  • Widespread leaks, especially along eaves and valleys after ice dams
  • Warped or uneven surfaces that prevent flat shingle courses

Need to correct deck slope washouts, add ventilated baffles at eaves, or reset ice-and-water shield to cold-climate widths

Building official or manufacturer requirement for deck inspection on that product/system

Tear-off is also the right ethical recommendation when an overlay would conceal known decay. Passing a short-term visual cover-up onto the next owner is not competent practice.

Deck Inspection After Tear-Off

Once the roof is stripped to sheathing, slow down. Illinois moisture often concentrates where snow sits longest—north slopes, valleys, behind chimneys, and at eaves inside the wall line. Inspect for:

  • Soft spots under foot pressure; probe suspect areas
  • Dark staining, fungal growth, and delaminated plywood/OSB edges
  • Overdriven or withdrawn nails from prior roofs
  • Inadequate thickness or spanning for current code loads
  • Knot holes, gaps, and damaged panels at hips and ridges
  • Evidence of chronic condensation (rusty nails, frost marks historically reported by owners)

Replace damaged panels; match thickness and panel rating; leave the deck clean, dry, and suitable for underlayment. Only then install ice-and-water shield at eaves/valleys, synthetic or felt underlayment as specified, new drip edge, and flashings. Reroofing without resetting cold-climate membrane details wastes the tear-off investment.

Using the Reroof to Fix Climate Systems

A steep-slope reroof in Illinois should be treated as a system reset:

  • Add or restore soffit intake and ridge exhaust with proper NFA balance
  • Install rafter baffles before insulating contractors refill eaves
  • Air-seal attic bypasses when the project scope allows access
  • Install ice-and-water shield to cold-climate eave dimensions, not token starter strips
  • Replace compromised step flashing rather than caulking over old metal
  • Confirm the chosen shingles are approved for the slope and for any recover scenario actually used

Code minimums, manufacturer instructions, and climate reality must agree. If an overlay prevents you from installing required ice barrier at the deck, the overlay is the wrong scope. Competent reroofing chooses tear-off whenever deck health, layer limits, or Illinois cold-climate detailing demand a clean start.