Study guide
3.2 Vehicular Volume Warrants (Warrants 1, 2, and 3)
IMSA Traffic Signal Senior Field Technician Level III Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Adaptive Signal Control Technology (ASCT) & Modern Systems
1.1 ASCT Architecture & Operational Principles 1.2 Model-Based vs. Rule-Based ASCT Algorithms 1.3 ASCT Detection Layout & System Health Monitoring 1.4 Central Traffic Management Systems (ATMS) & Architecture
2 Chapter 2: Connected Vehicles (V2X), ITS Integration & Emerging Technologies
2.1 Connected Vehicle V2X Architecture & the 5.9 GHz Safety Spectrum 2.2 Roadside Unit Installation, GNSS Timing & SCMS Security 2.3 SPaT and MAP Message Structure under SAE J2735 2.4 Controller-to-RSU Interface, CV Applications & MAP Field Verification 2.5 Preemption vs. Priority and Transit Signal Priority Strategies 2.6 TSP Detection Architectures, Conditional Priority & Freight Priority 2.7 Automated Traffic Signal Performance Measures (ATSPMs)
3 Chapter 3: MUTCD Signal Warrants & Justification Studies
3.1 Traffic Studies & Engineering Data Collection 3.2 Vehicular Volume Warrants (Warrants 1, 2, and 3) 3.3 Pedestrian, School Crossing, and Network Warrants (Warrants 4, 5, and 8) 3.4 Coordinated, Crash Experience, Grade Crossing, and PHB Warrants (Warrants 6, 7, and 9)
4 Chapter 4: MUTCD Signal Equipment, Display & Visibility Standards
4.1 Signal Face Arrangements & MUTCD Lens Sizing 4.2 LED Optics, Backplates & Optical Shielding 4.3 Number of Signal Faces, the 20-Degree Placement Envelope & Sight Distance 4.4 Signal Face Mounting Heights, Lateral Offset & Distance from the Stop Line 4.5 Flashing Yellow Arrow Operation & Yellow Trap Elimination 4.6 Pedestrian Signal Displays, Countdown Modules, Interval Timing & APS 4.7 Bicycle Signal Faces & MUTCD Flashing Operation
5 Chapter 5: Advanced Traffic Detection Technologies & Configuration
5.1 Video Image Detection & Microwave Radar Detection 5.2 Thermal, Acoustic & Magnetometer Detection Technologies 5.3 Inductive Loop Physics, Geometry & Conductor Standards 5.4 Multi-Loop Arrays, Lead-In Cable & Pull-Box Splicing 5.5 Detector Testing, Tuning, Megohmmeter Diagnostics & Troubleshooting
6 Chapter 6: Traffic Communications & Fiber Optic Networks
6.1 Optical Waveguide Physics, Fiber Types & OSP Cable Construction 6.2 Optical Connectors, Polish Geometries & Redundant ITS Ring Topologies 6.3 Fiber Splicing, Optical Testing & Link Loss Budgets 6.4 Managed Industrial Ethernet in Traffic Cabinets 6.5 Copper, Twisted-Pair & Wireless Communications Media
7 Chapter 7: Actuated Phasing, Ring-Barrier Structure & Dual-Ring Operations
7.1 NEMA Dual-Ring Phasing, Barriers & Phase Compatibility 7.2 Lead-Lag Left Turns, the Yellow Trap & Signal Overlaps 7.3 Actuated Phase Parameters, Minimum Green, Passage Time & Termination 7.4 Recall Modes, Volume-Density Control & Parameter Diagnostics 7.5 Yellow Change & Red Clearance Interval Kinematics 7.6 Dilemma Zones, Pedestrian Interval Equations & a Full Field Calculation
8 Chapter 8: Coordinated Arterial Timing & Preemption Systems
8.1 Arterial Progression Principles & Actuated-Coordinated Operation 8.2 Time-Space Diagrams, Lead-Lag Sequencing & Transition Troubleshooting 8.3 Emergency Vehicle Preemption Technologies & Execution Sequence 8.4 Railroad Preemption Interconnects & Warning Time Calculations
9 Chapter 9: Electrical Codes, Grounding, Surge Protection & Power Distribution
9.1 NEC Articles, Underground Cover & Raceway Fill 9.2 Conductor Ampacity, Derating & NESC Overhead Clearances 9.3 Grounding, Bonding & Ground Resistance Testing 9.4 Transient Overvoltage, Surge Protective Devices & Cabinet Lightning Protection 9.5 Battery Backup Systems, Battery Chemistries & AC Branch Circuit Voltage Drop 9.6 Basic Electrical & Electronic Fundamentals for Signal Technicians
10 Chapter 10: NEMA TS1, TS2 & ATC Cabinet Architecture
10.1 NEMA TS1 vs. TS2 Architecture, SDLC Bus & BIUs 10.2 Malfunction Management Units (MMU) vs. Conflict Monitors (CMU) 10.3 Model 170/2070, ATC Architecture, Load Switches & Flashers
11 Chapter 11: Project Oversight, Quality Assurance, Maintenance & Troubleshooting
11.1 Civil, Raceway & Pole Construction Inspection Milestones 11.2 IMSA Cable Specifications, Cable Pulling, Acceptance Testing & As-Builts 11.3 Systematic Cabinet Troubleshooting & Diagnostic Instrumentation 11.4 Electrical Safety, Arc Flash Protection & Work Zone Traffic Control
3.2 Vehicular Volume Warrants (Warrants 1, 2, and 3)
Key Takeaways Explain This Topic AI
Warrant 1 (Eight-Hour Vehicular Volume) requires volume thresholds to be met for any 8 hours of an average day across Condition A (Minimum Volume), Condition B (Interruption of Continuous Traffic), or Condition C (80% Combination).
The 70% columns of MUTCD Table 4C-1 may be used in place of the 100% columns when the posted or statutory speed limit or the 85th-percentile speed on the major street exceeds 40 mph, or when the intersection lies in the built-up area of an isolated community of fewer than 10,000 people.
When Condition C (80% combination) is evaluated under high-speed or rural conditions, the combined factor is 56% (0.80 × 0.70 = 0.56) of standard 100% thresholds.
Warrant 2 (Four-Hour Vehicular Volume) evaluates plotted volume points across any 4 hours of an average day against MUTCD Figure 4C-1 or 4C-2 curves.
Warrant 3 (Peak Hour) is intended for unique short-duration peak generators such as industrial shift changes or sports stadiums and requires extreme side-street delay or curve satisfaction.
Last updated: September 2026
3.2 Vehicular Volume Warrants (Warrants 1, 2, and 3)
Note
The Primary Vehicular Volume Warrants :
The MUTCD defines three dedicated vehicular volume warrants in Chapter 4C: Warrant 1 (Eight-Hour Vehicular Volume) , Warrant 2 (Four-Hour Vehicular Volume) , and Warrant 3 (Peak Hour) . These warrants evaluate whether sustained vehicular demand across intersecting approaches creates conflicting movements and delays of such magnitude that stop-controlled operations are no longer adequate.
In signal justification analysis, vehicular volume warrants are the most frequently analyzed and commonly satisfied warrants. However, applying these warrants requires precise compliance with lane designation rules, right-turn volume adjustments, speed threshold criteria, and hour-matching constraints.
Warrant 1: Eight-Hour Vehicular Volume
MUTCD Section 4C.02 defines Warrant 1 , which consists of three distinct conditions: Condition A (Minimum Vehicular Volume) , Condition B (Interruption of Continuous Traffic) , and Condition C (Combination of Conditions) .
General Operational Rules for Warrant 1
The 8-Hour Rule : The specified volume thresholds must be met or exceeded for any 8 hours of an average day . An average day is defined as a typical weekday representing regular traffic patterns. The 8 hours do not need to be consecutive, but the identical 8 hours must be used for both the major-street and the minor-street volumes within a given condition (Section 4C.02, Paragraph 5). The 8 hours selected for the Condition A analysis are not required to be the same 8 hours selected for Condition B. Under Section 4C.01, Paragraph 15, any four consecutive 15-minute periods may be treated as 1 hour provided the separate 1-hour periods do not overlap.
Approach Identification :
Major Street : The roadway carrying the higher total entering volume, or the designated arterial roadway.
Minor Street : The intersecting lower-volume street. The threshold applies to the higher-volume minor-street approach (one direction only), not the sum of both minor-street approaches!
Approach Lane Classification :
An approach is considered 1 lane if traffic moves in a single file.
An approach is considered 2 or more lanes if two or more through lanes are available, or if an exclusive turn lane carries substantial volume and operates independently without lane-blocking.
Right-turn volume exclusion : If an exclusive right-turn lane exists on the minor approach with adequate deceleration length, minimal cross-traffic conflict, and little delay, the engineer may exclude the right-turn volume from the minor approach count and evaluate the remaining approach lanes as a single-lane approach.
Condition A: Minimum Vehicular Volume
Condition A applies to intersections where the principal volume of intersecting traffic is high on both intersecting streets (such as two busy arterial or collector corridors). Traffic signals are intended to allocate time between heavy conflicting flows.
Condition B: Interruption of Continuous Traffic
Condition B applies where traffic on the major street is so continuous and heavy that minor-street traffic suffers excessive delay or hazard in entering or crossing the major street. The major-street threshold is significantly higher than in Condition A, while the minor-street threshold is lower (reflecting difficulty in finding crossing gaps).
Condition C: Combination of Conditions (80% Criteria)
Condition C is utilized in exceptional circumstances where neither Condition A nor Condition B is fully satisfied on its own, but both are met to at least the 80% level . Condition C is only permitted after an adequate trial of less restrictive remedies has failed to resolve traffic operations.
Volume Reductions: 70% Factor and 56% Combined Factor
Each volume warrant carries its own reduction Option — Warrant 1 in Section 4C.02, Paragraph 7 , Warrant 2 in Section 4C.03, Paragraph 4 , and Warrant 3 in Section 4C.04, Paragraph 4 . In every case the reduced values may be used if:
The posted or statutory speed limit or the 85th-percentile speed on the major street exceeds 40 mph ; OR
The intersection lies within the built-up area of an isolated community having a population of less than 10,000 .
Warning
Exam trap : the trigger is posted or statutory speed limit or 85th-percentile speed — either one exceeding 40 mph is sufficient. Candidates who memorize only "85th percentile" will mis-analyze an approach posted at 45 mph whose measured 85th-percentile speed is 38 mph. Note also that the corresponding Option for Warrant 4 (Pedestrian Volume) uses 35 mph , not 40 mph.
When both the 80% Combination (Condition C) AND the 70% high-speed / rural factor apply simultaneously, the overall multiplier is: 0.80 × 0.70 = 0.56 ( 56 % of base standard thresholds ) 0.80 \times 0.70 = 0.56 \quad (56\% \text{ of base standard thresholds}) 0.80 × 0.70 = 0.56 ( 56% of base standard thresholds )
Comprehensive MUTCD Warrant 1 Threshold Matrix
The following table provides the complete, exact numerical vehicular volume thresholds for MUTCD Warrant 1 across all approach lane configurations and reduction factors (MUTCD Table 4C-1):
Condition & Approach Geometry Standard (100%) Base Criteria High-Speed / Rural (70% Factor) Combination (80% Factor) High-Speed + Combo (56% Factor)
Condition A: Minimum Volume
1 lane major / 1 lane minor Major: 500 vph; Minor: 150 vph Major: 350 vph; Minor: 105 vph Major: 400 vph; Minor: 120 vph Major: 280 vph; Minor: 84 vph
2+ lanes major / 1 lane minor Major: 600 vph; Minor: 150 vph Major: 420 vph; Minor: 105 vph Major: 480 vph; Minor: 120 vph Major: 336 vph; Minor: 84 vph
2+ lanes major / 2+ lanes minor Major: 600 vph; Minor: 200 vph Major: 420 vph; Minor: 140 vph Major: 480 vph; Minor: 160 vph Major: 336 vph; Minor: 112 vph
1 lane major / 2+ lanes minor Major: 500 vph; Minor: 200 vph Major: 350 vph; Minor: 140 vph Major: 400 vph; Minor: 160 vph Major: 280 vph; Minor: 112 vph
Condition B: Interruption of Traffic
1 lane major / 1 lane minor Major: 750 vph; Minor: 75 vph Major: 525 vph; Minor: 53 vph Major: 600 vph; Minor: 60 vph Major: 420 vph; Minor: 42 vph
2+ lanes major / 1 lane minor Major: 900 vph; Minor: 75 vph Major: 630 vph; Minor: 53 vph Major: 720 vph; Minor: 60 vph Major: 504 vph; Minor: 42 vph
2+ lanes major / 2+ lanes minor Major: 900 vph; Minor: 100 vph Major: 630 vph; Minor: 70 vph Major: 720 vph; Minor: 80 vph Major: 504 vph; Minor: 56 vph
1 lane major / 2+ lanes minor Major: 750 vph; Minor: 100 vph Major: 525 vph; Minor: 70 vph Major: 600 vph; Minor: 80 vph Major: 420 vph; Minor: 56 vph
Note: Major-street volume represents the total of both approaches (vph). Minor-street volume represents the higher-volume approach in one direction only (vph).
Warrant 2: Four-Hour Vehicular Volume
MUTCD Section 4C.03 establishes Warrant 2 , intended for intersections where vehicular volume is high for a shorter duration than 8 hours, but remains substantial over four individual hours of an average day.
Graphical Curve Evaluation Mechanics
Unlike Warrant 1's fixed tabular numbers, Warrant 2 is evaluated graphically by plotting hourly data points on MUTCD curves:
MUTCD Figure 4C-1 : Standard volume curves (urban / operating speed ≤ 40 \le 40 ≤ 40 mph).
MUTCD Figure 4C-2 : 70% volume reduction curves (major-street 85th percentile speed > 40 > 40 > 40 mph or isolated community < 10 , 000 < 10,000 < 10 , 000 population). Minor-Street Higher Approach Volume (VPH)
- ^
- 300 | [Curve: 2+ Major / 2+ Minor]
- 250 | . - '
- 200 | . - ' * Hr 3
- 150 | . - ' * Hr 1 * Hr 2
- 100 | . - ' * Hr 4
- 50 | . - ' (If all 4 plotted hours fall ABOVE curve, Warrant 2 is MET)
- 0 +------------------------------------------------------------>
- 0 200 400 600 800 1000 1200 1400
- Major-Street Total Volume Both Approaches (VPH)
- Step-by-Step Procedure for Warrant 2 Analysis
From the 12-hour or 16-hour turning movement count, determine the total entering volume on the major street (both approaches combined) and the volume on the higher minor-street approach (one direction only) for every hour.
Plot each hour as an ( x , y ) (x, y) ( x , y ) point: x = Major Street Total Volume (vph) x = \text{Major Street Total Volume (vph)} x = Major Street Total Volume (vph) , y = Minor Street Higher Approach Volume (vph) y = \text{Minor Street Higher Approach Volume (vph)} y = Minor Street Higher Approach Volume (vph) .
Select the appropriate curve based on approach geometry (1 lane / 1 lane; 2+ lanes / 1 lane; 2+ lanes / 2+ lanes; or 1 lane / 2+ lanes).
Warrant Satisfaction Rule : If any four plotted hours fall above the applicable curve, Warrant 2 is satisfied. The four hours do not need to be consecutive, but the same four hours must be used for both major and minor approaches.
Warrant 3: Peak Hour
MUTCD Section 4C.04 establishes Warrant 3 , which is designed specifically for unusual and severe conditions where traffic demand is concentrated into a single peak hour of the day.
Warning
Restrictive Application of Warrant 3 :
The MUTCD states that Warrant 3 should be applied only in unusual cases , such as office complexes, manufacturing facilities with shift changes, regional amusement parks, or major sports venues that generate high-volume, concentrated traffic over a short time window. If a signal is installed solely under Warrant 3, it often causes excessive delay to major-street traffic during the other 23 hours of the day. Less restrictive alternatives (such as channelization, dynamic turn lane assignments, or manual police traffic control during the peak window) must be thoroughly considered first.
Warrant 3 is satisfied if either Condition A or Condition B is met. Both are evaluated over the same 1 hour (any four consecutive 15-minute periods) of an average day:
Condition A: Peak-Hour Delay, Volume, and Entering Thresholds
All three of the following criteria must be met during the same single peak hour of an average day:
Minor-Street Delay : The total stopped-time delay experienced by the traffic on one minor-street approach ( one direction only ) controlled by a STOP sign equals or exceeds 4 vehicle-hours for a one-lane approach, or 5 vehicle-hours for a two-lane approach; AND
Minor-Street Volume : The volume on the same minor-street approach equals or exceeds 100 vph for 1 lane of moving traffic, or 150 vph for 2 or more lanes; AND
Total Entering Volume : The total entering volume from all approaches equals or exceeds 650 vph for intersections with three approaches (T-intersections), or 800 vph for intersections with four or more approaches.
Condition B: Peak-Hour Volume Curves
Condition B evaluates plotted volume points during a single peak hour on MUTCD Figure 4C-3 (standard) or Figure 4C-4 (70% factor). If the single peak hour plots above the applicable geometric curve, Condition B is met.
- Technical Calculations and Practical Example
- Field Scenario: Suburban Arterial Evaluation
A technician evaluates an intersection with 2 through lanes on the major street (posted 45 mph, measured 85th percentile speed 47 mph) and 1 lane on the minor-street approach. The community has a population of 85,000. Peak 8-hour data shows:
Major-street total volume averages 680 vph .
Minor-street higher approach volume averages 110 vph .
Analysis Steps :
Check High-Speed Factor: Because the 85th percentile speed (47 mph) exceeds 40 mph, the 70% high-speed factor applies.
Evaluate Warrant 1, Condition A (2+ lanes major / 1 lane minor, 70%):
Major threshold: 420 vph. Actual = 680 vph ≥ 420 \ge 420 ≥ 420 vph (SATISFIED).
Minor threshold: 105 vph. Actual = 110 vph ≥ 105 \ge 105 ≥ 105 vph (SATISFIED).
Conclusion : Warrant 1, Condition A is satisfied across the 8-hour window under the 70% high-speed reduction criteria.