Study guide

4.2 Portable Changeable Message Signs (PCMS) & Arrow Boards (Display Modes, Placement, & Messages)

IMSA Work Zone Temporary Traffic Control Technician Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview & MUTCD Part 6 Fundamentals

1.1 IMSA Work Zone Certification & Regulatory Basis 1.2 Fundamental Principles of Temporary Traffic Control (TTC) 1.3 Legal Authority, Liability, & MUTCD Headings

2 Chapter 2: Temporary Traffic Control Zone Components

2.1 The Advance Warning Area (Sign Spacing A/B/C Distances & Roadway Types) 2.2 The Transition Area (Taper Types: Merging, Shifting, Shoulder, Downstream) 2.3 The Activity Area (Longitudinal/Lateral Buffer Spaces, Work Space, Traffic Space) 2.4 The Termination Area (Downstream Tapers, Signage, & Teardown Sequences)

3 Chapter 3: Work Zone Speed Management & Taper Calculations

3.1 Taper Length Formulas 3.2 Device Spacing Rules in Tapers and Tangents 3.3 Work Zone Speed Limit Reductions & Urban vs. Rural Conditions

4 Chapter 4: Temporary Traffic Control Signage

4.1 Temporary Work Zone Signs (Colors, Shapes, Retroreflectivity, Roll-up vs. Rigid) 4.2 Portable Changeable Message Signs (PCMS) & Arrow Boards (Display Modes, Placement, & Messages) 4.3 Sign Mounting Heights, Portable Supports, & Crashworthiness (NCHRP 350 / MASH)

5 Chapter 5: Channelizing & Delineation Devices

5.1 Cones, Tubular Markers, & Vertical Panels 5.2 Drums & Barricades 5.3 Longitudinal Channelizing Devices (LCDs), Temporary Pavement Markings, & Raised Pavement Markers

6 Chapter 6: Positive Protection & Safety Hardware

6.1 Positive Protection Devices 6.2 Truck-Mounted Attenuators (TMAs) & Shadow Vehicles 6.3 Vehicle Warning Lights, ANSI/ISEA 107 Class 2/3 High-Visibility Apparel, & Worker PPE

7 Chapter 7: Flagging Operations — Principles & Positioning

7.1 Flagger Qualifications, Responsibilities, & High-Visibility Safety Equipment 7.2 Flagger Station Selection, Stopping Sight Distance, Flagger Advance Warning Signage, & Escape Paths 7.3 Flagger Hand Signaling (STOP, SLOW, Proceed Signals via STOP/SLOW Paddle vs. Red Flag Emergency Procedures)

8 Chapter 8: One-Lane, Two-Way Traffic Control & Coordination

8.1 One-Lane, Two-Way Control Methods 8.2 Temporary Traffic Control Signals & Automated Flagger Assistance Devices (AFADs) 8.3 Emergency Vehicle Pass-Through Protocols & Queue Management During Flagging

9 Chapter 9: Typical Applications (TA) — Stationary Operations

9.1 TA-1 to TA-16: Work on Shoulders & Lane Closures on Two-Lane Roads 9.2 Multilane & Expressway Lane Closures (TA-30 to TA-34) 9.3 Double Lane Closures, Lane Shifts, Intersection & Roundabout Work Zones (TA-21 to TA-27, TA-36, TA-37, TA-52 to TA-54)

10 Chapter 10: Mobile, Short-Duration, & Nighttime Operations

10.1 Mobile Operations (Continuous Movement, Slow-Moving Convoy, Shadow Vehicle Spacing, TA-17 & TA-35) 10.2 Short-Duration Work (Under 1 Hour) & Emergency Maintenance Setup Rules 10.3 Nighttime Temporary Traffic Control (Glare Control, Artificial Lighting Specs, & Retroreflectivity Requirements)

11 Chapter 11: Worker Safety, Positive Protection, & Accessibility

11.1 Worker Safety Measures & Positive Protection Selection Guidelines (23 CFR 630 Subpart K) 11.2 Pedestrian Accessibility (ADA Compliance, Continuous Detectable Pathways, & Audible Warnings) 11.3 Bicycle Accommodation & Detour Signing in TTC Zones

12 Chapter 12: Incident Management & Special Work Zone Environments

12.1 Traffic Incident Management (TIM) Zones 12.2 Utility & Municipal Maintenance Work Zones 12.3 Work Zone Inspection, Maintenance, & Log Keeping

13 Chapter 13: Traffic Control Theory, Capacity, & Queue Management

13.1 Traffic Flow Theory & Capacity Reduction in Work Zones 13.2 Queue Development, Shockwaves, & End-of-Queue Crash Mitigation 13.3 Temporary Traffic Control Plan (TTCP) Design & Inspection Workflows

4.2 Portable Changeable Message Signs (PCMS) & Arrow Boards (Display Modes, Placement, & Messages)

Key Takeaways Explain This Topic AI

Portable Changeable Message Signs (PCMS) should be limited to a maximum of 3 lines of text (or a full-matrix display) with up to 8 characters per line for full-size units, and a maximum of 2 phases per message cycle.

The standard display rate for multi-phase PCMS messages requires each phase to be displayed for at least 2.0 seconds, with total message cycle time not exceeding 8.0 seconds.

Arrow Board display modes include Flashing Arrow / Sequential Chevron (lane closure), Flashing Double Arrow (two-lane split), and Flashing Caution or Alternating Diamond Caution (shoulder work / lane blockage warning without merge).

PCMS units must be placed on the shoulder or beyond the clear zone prior to the work zone tapers, sited and aligned for maximum legibility, off the shoulder and behind a barrier or outside the clear zone where practicable.

Arrow panels must be visible from a minimum distance of 1 mile for Type C panels (96 in x 48 in on high-speed freeways) and shall be capable of at least 50 percent dimming from full brilliance, with the dimmed mode used for nighttime operation.

Last updated: July 2026

  • 4.2 Portable Changeable Message Signs (PCMS) & Arrow Boards (Display Modes, Placement, & Messages)
  • Portable Changeable Message Signs (PCMS) Specifications

Portable Changeable Message Signs (PCMS) are dynamic, electronic traffic control devices designed to convey real-time, emergency, or variable traffic information to road users. Governed by MUTCD Section 6L.05 , PCMS units are deployed when static warning signs cannot adequately convey changing field conditions, such as unexpected queues, lane closures, detours, adverse weather delays, or altered speed limits.

A standard full-size PCMS consists of a trailer-mounted LED matrix display panel powered by a battery bank supplemented by solar charging panels. The key hardware and operational parameters recommended by the MUTCD (these are Guidance, not Standard) include:

Matrix Architecture: Displays feature either character-matrix (discrete 5x7 or 3x15 pixel character blocks) or full-matrix LED layouts capable of displaying text and approved graphical symbols.

Display Capacity: Standard full-size PCMS displays are formatted to show a maximum of 3 lines of text per phase , with up to 8 characters per line (including spaces). This 3-line, 8-character matrix (24 characters total per phase) represents the optimal cognitive processing threshold for drivers traveling at highway speeds.

Character Height & Legibility Distance:

All facilities: Letter height should be a minimum of 18 inches . The PCMS itself should be visible from 1/2 mile under both day and night conditions.

Incident-response and service patrol vehicles: A letter height as short as 10 inches may be used. Shorter letters may also be used on low-speed facilities provided the message is legible from at least 650 feet .

Automatic Dimming Control: PCMS units must incorporate a photoelectric sensor that automatically adjusts LED brightness. The MUTCD requires only that PCMS automatically adjust their brightness under varying light conditions; the 50-percent dimming requirement applies to arrow boards, not PCMS to prevent driver glare and haloing, while ramping up intensity under bright sunlight to maintain high contrast.

PCMS Message Design, Phase Timing, & Prohibited Formatting

Because drivers have only a few seconds to read dynamic sign text while maintaining control of their vehicles, message composition is governed by strict human factors guidelines. MUTCD Section 6L.05 establishes the following operational guidance:

Phase Limitations: A PCMS message cycle must contain no more than 2 phases (screens). MUTCD Guidance is that a message should consist of no more than two phases; if more than two phases are needed, additional PCMS should be used, separated by at least 1,000 feet on freeways and expressways and at least 500 feet on other highways. If a driver approaching at 65 mph cannot read the message in 2 phases, the information is too complex and must be simplified.

Phase Display Timing:

Each phase must be displayed for a minimum of 2.0 seconds .

The total cycle time for a 2-phase message (Phase 1 + Phase 2) must not exceed 8.0 seconds .

Each phase should be capable of being understood by itself, regardless of the order in which it is read, and messages should be centered within each line of legend.

Standard 3-Line Message Formatting Rule:

Line 1 (The Problem / Hazard): Identifies what is occurring ahead (e.g., LEFT LANE , ROAD WORK , ACCIDENT ).

Line 2 (Location / Distance): Specifies where the hazard is located (e.g., AT EXIT 12 , 1 MILE , AHEAD ).

Line 3 (Recommended Action): Instructs the driver on what action to take (e.g., MERGE RIGHT , PREPARE TO STOP , USE DETOUR ).

Prohibited PCMS Practices:

No Scrolling or Moving Text: Text must never scroll horizontally across the screen or slide vertically.

No Dynamic Display Techniques: Animation, rapid flashing, dissolving, exploding, scrolling, and horizontal or vertical travel across the sign face are prohibited outright, except when the PCMS is used to simulate an arrow board display.

No Advertising or Non-Traffic Messages: PCMS displays must never present commercial messages, public service announcements, or generic text such as DRIVE SAFELY or HAVE A NICE DAY during active work zone operations. +-------------------------------------------------------------------------+

  • | PCMS 2-PHASE MESSAGE DISPLAY STANDARD |
  • +-------------------------------------------------------------------------+
  • | PHASE 1 (Display >= 2.0 s) | PHASE 2 (Display >= 2.0 s) |
  • | +------------------------+ | +------------------------+ |
  • | Line 1 | L E F T L A N E | | | M E R G E | |
  • | Line 2 | C L O S E D | | | R I G H T | |
  • | Line 3 | 1 M I L E | | | A H E A D | |
  • | +------------------------+ | +------------------------+ |
  • +-------------------------------------------------------------------------+
  • Arrow Boards: Specifications, Sizes, and Display Modes

Arrow Boards (also referred to as Arrow Panels) are high-intensity light displays used to supplement static advance warning signs and channelizing devices in temporary traffic control zones (MUTCD Section 6L.06). They provide crisp, directional guidance to advise approaching drivers of lane closures and split movements.

Arrow Board Classification & Minimum Dimensions (MUTCD Figure 6L-3):

Type A (48 inches x 24 inches): Features a minimum of 12 lamps. Appropriate for use on low-speed urban streets. Minimum legibility distance is 1/2 mile (2,640 feet).

Type B (60 inches x 30 inches): Features a minimum of 13 lamps. Appropriate for intermediate-speed facilities and for maintenance or mobile operations on high-speed roadways. Minimum legibility distance is 3/4 mile (3,960 feet).

Type C (96 inches x 48 inches): Features a minimum of 15 lamps. Intended for use on high-speed, high-volume motor vehicle traffic control projects. Minimum legibility distance is 1 mile (5,280 feet).

Type D (Flexible In-Vehicle / Trailer): Used for mobile operations.

Operational Display Modes & Legal Usage:

Lane Closure Modes (Directing Traffic Merge):

Flashing Arrow: Displays a solid arrowhead flashing in the direction of the open lane ( LEFT or RIGHT ).

Sequential Chevron: Displays a series of flashing chevrons pointing continuously toward the open lane.

Usage Rule: Flashing Arrow, Sequential Arrow, and Sequential Chevron modes shall be used only for stationary or moving lane closures on multi-lane roadways . Arrow boards shall be used only to indicate a lane closure and shall not be used to indicate a lane shift. They must never be used on two-lane, two-way roads where flaggers or temporary signals govern alternating one-way traffic.

Split Traffic / Multi-Lane Shift Mode:

Flashing Double Arrow: Displays arrowheads pointing simultaneously to the left and right.

Usage Rule: Authorized strictly for center lane closures on multi-lane roadways where traffic is permitted to pass safely on either side of the work obstruction. It is strictly prohibited for single-direction lane merges.

Caution / Warning Modes (No Merge Authorized):

Alternating Four-Corner Flash: Flashes four lamps positioned at the outermost corners of the panel.

Alternating Diamond Caution: Alternately flashes two diamond-shaped groups of elements.

Usage Rule: Caution mode signifies that a work operation is present along the shoulder or within a closed lane, but does not authorize or direct a lane change . Drivers are advised to proceed with caution in their established lane. +-------------------------------------------------------------------------+

  • | ARROW BOARD OPERATIONAL DISPLAY MODES |
  • +-------------------------------------------------------------------------+
  • | Display Mode | Visual Pattern | Authorized Application|
  • +-------------------------+------------------------+----------------------|
  • | Flashing Arrow (R or L) | <--- or ---> | Single Lane Closure |
  • | Sequential Chevron | <<< or >>> | High-Speed Merge |
  • | Flashing Double Arrow | <---------> | Center Split Only |
  • | Four-Corner Caution | * * | Shoulder Work Only |
  • | | * * | (No Lane Change) |
  • +-------------------------------------------------------------------------+
  • Field Placement, Lateral Offset, and Sight Distance Rules

Proper field installation of PCMS trailer units and Arrow Boards is vital to prevent secondary crashes and ensure drivers process displays well in advance of merge tapers:

Placement of Arrow Boards:

For a stationary lane closure, the arrow board should be located on the shoulder at the beginning of the merging taper; where the shoulder is narrow, it should be located in the closed lane. A separate arrow board shall be used for each closed lane.

For mobile operations, the Arrow Board is mounted on the rear of a shadow vehicle equipped with a Truck-Mounted Attenuator (TMA) trailing the work convoy.

Placement of PCMS Units:

Positioned upstream of the work zone , well in advance of the first static advance warning sign or upstream of the expected traffic queue tail.

Placed off the shoulder and behind a traffic barrier where practicable; where no barrier is available, off the shoulder and outside the clear zone. If it must be placed on the shoulder or within the clear zone, it shall be delineated with retroreflective TTC devices.

Clear Zone Offset & Delineation:

When placed on the shoulder within the roadside clear zone, trailer units present a potential fixed-object hazard. They must be delineated with retroreflective channelizing drums or protected by temporary crash cushions.

Aiming Angle & Glare Elimination:

Trailer units must be leveled using jack stands to ensure the display panel is perpendicular to the vertical grade.

To maximize LED target value while eliminating specular nighttime reflection glare (headlight reflection off the polycarbonate screen), the display panel should be sited and aligned to provide maximum legibility and to allow time for road users to respond; the MUTCD prescribes no specific aiming angle.

Loading diagram... TTC Advance Warning Zone PCMS & Arrow Board Field Placement Layout