Study guide

4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI)

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI)

Key Takeaways Explain This Topic AI

Quadratic roots are governed by discriminant Δ = b 2 − 4 a c \Delta = b^2 - 4ac Δ = b 2 − 4 a c , sum α + β = − b a \alpha + \beta = -\frac{b}{a} α + β = − a b ​ , and product α β = c a \alpha\beta = \frac{c}{a} α β = a c ​ , allowing quick equation construction and sign analysis.

Symmetric algebraic identities and reciprocal powers ( x + 1 x = k ⟹ x 2 + 1 x 2 = k 2 − 2 , x 3 + 1 x 3 = k 3 − 3 k x + \frac{1}{x} = k \implies x^2 + \frac{1}{x^2} = k^2 - 2, x^3 + \frac{1}{x^3} = k^3 - 3k x + x 1 ​ = k ⟹ x 2 + x 2 1 ​ = k 2 − 2 , x 3 + x 3 1 ​ = k 3 − 3 k ) simplify high-degree polynomials in competitive tests.

2D and 3D mensuration relies on fundamental volume and surface area relationships (cylinders π r 2 h \pi r^2 h π r 2 h , cones 1 3 π r 2 h \frac{1}{3}\pi r^2 h 3 1 ​ π r 2 h , spheres 4 3 π r 3 \frac{4}{3}\pi r^3 3 4 ​ π r 3 ), governed by the principle of volume conservation during metal/material recasting.

Data Interpretation (DI) requires mastery of tabular data, bar graphs, line charts, and pie chart angle conversions ( 1 % = 3.6 ∘ 1\% = 3.6^{\circ} 1% = 3. 6 ∘ ), emphasizing percentage growth, year-on-year analysis, and ratio evaluation.

Speed in DI is achieved by calculating approximate percentages, using common denominators, and avoiding complete manual arithmetic when options have distinct divergence.

Last updated: August 2026

Algebra, Mensuration, Geometry & Data Interpretation (DI)

Quantitative Aptitude in CIL MT Paper-I culminates in advanced algebraic relationships, 2D/3D mensuration geometry, and Data Interpretation (DI). Engineers are expected to interpret graphical outputs, calculate geometrical material clearances, and manipulate polynomial equations with precision.

  • 1. Algebraic Identities & Quadratic Polynomials
  • Core Polynomial Identities

Standard Binomial & Trinomial Expansions: ( a ± b ) 2 = a 2 ± 2 a b + b 2 (a \pm b)^2 = a^2 \pm 2ab + b^2 ( a ± b ) 2 = a 2 ± 2 ab + b 2 ( a + b + c ) 2 = a 2 + b 2 + c 2 + 2 ( a b + b c + c a ) (a + b + c)^2 = a^2 + b^2 + c^2 + 2(ab + bc + ca) ( a + b + c ) 2 = a 2 + b 2 + c 2 + 2 ( ab + b c + c a ) a 2 − b 2 = ( a − b ) ( a + b ) a^2 - b^2 = (a - b)(a + b) a 2 − b 2 = ( a − b ) ( a + b ) ( a ± b ) 3 = a 3 ± 3 a 2 b + 3 a b 2 ± b 3 = a 3 ± b 3 ± 3 a b ( a ± b ) (a \pm b)^3 = a^3 \pm 3a^2b + 3ab^2 \pm b^3 = a^3 \pm b^3 \pm 3ab(a \pm b) ( a ± b ) 3 = a 3 ± 3 a 2 b + 3 a b 2 ± b 3 = a 3 ± b 3 ± 3 ab ( a ± b ) a 3 + b 3 = ( a + b ) ( a 2 − a b + b 2 ) a^3 + b^3 = (a + b)(a^2 - ab + b^2) a 3 + b 3 = ( a + b ) ( a 2 − ab + b 2 ) a 3 − b 3 = ( a − b ) ( a 2 + a b + b 2 ) a^3 - b^3 = (a - b)(a^2 + ab + b^2) a 3 − b 3 = ( a − b ) ( a 2 + ab + b 2 )

The Conditional Cubic Identity: a 3 + b 3 + c 3 − 3 a b c = ( a + b + c ) ( a 2 + b 2 + c 2 − a b − b c − c a ) a^3 + b^3 + c^3 - 3abc = (a + b + c)(a^2 + b^2 + c^2 - ab - bc - ca) a 3 + b 3 + c 3 − 3 ab c = ( a + b + c ) ( a 2 + b 2 + c 2 − ab − b c − c a ) = 1 2 ( a + b + c ) [ ( a − b ) 2 + ( b − c ) 2 + ( c − a ) 2 ] = \frac{1}{2}(a + b + c)\left[(a - b)^2 + (b - c)^2 + (c - a)^2\right] = 2 1 ​ ( a + b + c ) [ ( a − b ) 2 + ( b − c ) 2 + ( c − a ) 2 ] If a + b + c = 0 , then a 3 + b 3 + c 3 = 3 a b c \text{If } a + b + c = 0, \quad \text{then } a^3 + b^3 + c^3 = 3abc If a + b + c = 0 , then a 3 + b 3 + c 3 = 3 ab c

Reciprocal Powers ( x + 1 / x = k x + 1/x = k x + 1/ x = k ):

  • x 2 + 1 x 2 = k 2 − 2 x^2 + \frac{1}{x^2} = k^2 - 2 x 2 + x 2 1 ​ = k 2 − 2
  • x 3 + 1 x 3 = k 3 − 3 k x^3 + \frac{1}{x^3} = k^3 - 3k x 3 + x 3 1 ​ = k 3 − 3 k
  • x 4 + 1 x 4 = ( k 2 − 2 ) 2 − 2 x^4 + \frac{1}{x^4} = (k^2 - 2)^2 - 2 x 4 + x 4 1 ​ = ( k 2 − 2 ) 2 − 2

If x − 1 x = k ⟹ x 2 + 1 x 2 = k 2 + 2 , x 3 − 1 x 3 = k 3 + 3 k x - \frac{1}{x} = k \implies x^2 + \frac{1}{x^2} = k^2 + 2, \quad x^3 - \frac{1}{x^3} = k^3 + 3k x − x 1 ​ = k ⟹ x 2 + x 2 1 ​ = k 2 + 2 , x 3 − x 3 1 ​ = k 3 + 3 k

Quadratic Equations & Nature of Roots

For a x 2 + b x + c = 0 ax^2 + bx + c = 0 a x 2 + b x + c = 0 with roots α \alpha α and β \beta β : x = − b ± b 2 − 4 a c 2 a x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} x = 2 a − b ± b 2 − 4 a c ​ ​

  • Sum of Roots: α + β = − b a \alpha + \beta = -\frac{b}{a} α + β = − a b ​
  • Product of Roots: α β = c a \alpha \beta = \frac{c}{a} α β = a c ​

Discriminant Analysis ( Δ = b 2 − 4 a c \Delta = b^2 - 4ac Δ = b 2 − 4 a c ):

Δ > 0 \Delta > 0 Δ > 0 : Two distinct real roots (rational if Δ \Delta Δ is a perfect square).

Δ = 0 \Delta = 0 Δ = 0 : Two equal real roots ( α = β = − b / 2 a \alpha = \beta = -b/2a α = β = − b /2 a ).

Δ < 0 \Delta < 0 Δ < 0 : Complex conjugate roots.

2. 2D Mensuration & Plane Geometry

Shape Perimeter / Circumference Area ( A A A ) Special Properties

Scalene Triangle P = a + b + c P = a + b + c P = a + b + c A = s ( s − a ) ( s − b ) ( s − c ) A = \sqrt{s(s-a)(s-b)(s-c)} A = s ( s − a ) ( s − b ) ( s − c ) ​ Semi-perimeter s = ( a + b + c ) / 2 s = (a+b+c)/2 s = ( a + b + c ) /2 (Heron's Formula)

Equilateral Triangle P = 3 a P = 3a P = 3 a A = 3 4 a 2 A = \frac{\sqrt{3}}{4}a^2 A = 4 3 ​ ​ a 2 Height h = 3 2 a h = \frac{\sqrt{3}}{2}a h = 2 3 ​ ​ a , Inradius r = a 2 3 r = \frac{a}{2\sqrt{3}} r = 2 3 ​ a ​ , Circumradius R = a 3 R = \frac{a}{\sqrt{3}} R = 3 ​ a ​

Right Triangle P = a + b + h P = a + b + h P = a + b + h A = 1 2 × base × height A = \frac{1}{2} \times \text{base} \times \text{height} A = 2 1 ​ × base × height Hypotenuse h = a 2 + b 2 h = \sqrt{a^2 + b^2} h = a 2 + b 2 ​

Rectangle P = 2 ( l + w ) P = 2(l + w) P = 2 ( l + w ) A = l × w A = l \times w A = l × w Diagonal d = l 2 + w 2 d = \sqrt{l^2 + w^2} d = l 2 + w 2 ​

Rhombus P = 4 a P = 4a P = 4 a A = 1 2 d 1 d 2 A = \frac{1}{2} d_1 d_2 A = 2 1 ​ d 1 ​ d 2 ​ Diagonals bisect at 90 ∘ 90^{\circ} 9 0 ∘ ; Side a = 1 2 d 1 2 + d 2 2 \text{Side } a = \frac{1}{2}\sqrt{d_1^2 + d_2^2} Side a = 2 1 ​ d 1 2 ​ + d 2 2 ​ ​

Trapezium P = a + b + c + d P = a + b + c + d P = a + b + c + d A = 1 2 ( a + b ) × h A = \frac{1}{2}(a + b) \times h A = 2 1 ​ ( a + b ) × h a , b a, b a , b are parallel sides, h h h is perpendicular distance

Circle C = 2 π r C = 2\pi r C = 2 π r A = π r 2 A = \pi r^2 A = π r 2 Sector Area = θ 360 ∘ π r 2 = \frac{\theta}{360^{\circ}}\pi r^2 = 36 0 ∘ θ ​ π r 2 , Arc Length = θ 360 ∘ 2 π r = \frac{\theta}{360^{\circ}}2\pi r = 36 0 ∘ θ ​ 2 π r

Annulus (Ring) — A = π ( R 2 − r 2 ) A = \pi(R^2 - r^2) A = π ( R 2 − r 2 ) Width w = R − r w = R - r w = R − r

3. 3D Mensuration: Solids & Volume Conservation

Solid Object Volume ( V V V ) Curved / Lateral Surface Area ( C S A CSA CS A ) Total Surface Area ( T S A TSA TS A )

Cuboid V = l × w × h V = l \times w \times h V = l × w × h L S A = 2 h ( l + w ) LSA = 2h(l + w) L S A = 2 h ( l + w ) T S A = 2 ( l w + w h + h l ) TSA = 2(lw + wh + hl) TS A = 2 ( lw + w h + h l ) , Diagonal = l 2 + w 2 + h 2 = \sqrt{l^2 + w^2 + h^2} = l 2 + w 2 + h 2 ​

Cube V = a 3 V = a^3 V = a 3 L S A = 4 a 2 LSA = 4a^2 L S A = 4 a 2 T S A = 6 a 2 TSA = 6a^2 TS A = 6 a 2 , Diagonal = a 3 = a\sqrt{3} = a 3 ​

Right Cylinder V = π r 2 h V = \pi r^2 h V = π r 2 h C S A = 2 π r h CSA = 2\pi rh CS A = 2 π r h T S A = 2 π r ( h + r ) TSA = 2\pi r(h + r) TS A = 2 π r ( h + r )

Hollow Cylinder V = π ( R 2 − r 2 ) h V = \pi(R^2 - r^2)h V = π ( R 2 − r 2 ) h C S A = 2 π ( R + r ) h CSA = 2\pi(R + r)h CS A = 2 π ( R + r ) h T S A = 2 π ( R + r ) h + 2 π ( R 2 − r 2 ) TSA = 2\pi(R + r)h + 2\pi(R^2 - r^2) TS A = 2 π ( R + r ) h + 2 π ( R 2 − r 2 )

Right Cone V = 1 3 π r 2 h V = \frac{1}{3}\pi r^2 h V = 3 1 ​ π r 2 h C S A = π r l CSA = \pi r l CS A = π r l T S A = π r ( l + r ) TSA = \pi r(l + r) TS A = π r ( l + r ) , Slant Height l = r 2 + h 2 l = \sqrt{r^2 + h^2} l = r 2 + h 2 ​

Sphere V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 ​ π r 3 C S A = 4 π r 2 CSA = 4\pi r^2 CS A = 4 π r 2 T S A = 4 π r 2 TSA = 4\pi r^2 TS A = 4 π r 2

Hemisphere V = 2 3 π r 3 V = \frac{2}{3}\pi r^3 V = 3 2 ​ π r 3 C S A = 2 π r 2 CSA = 2\pi r^2 CS A = 2 π r 2 T S A = 3 π r 2 TSA = 3\pi r^2 TS A = 3 π r 2

Volume Conservation in Recasting: When a solid metal ingot or billet is melted down and recast into N N N identical smaller bodies: V original = N × V new V_{\text{original}} = N \times V_{\text{new}} V original ​ = N × V new ​

Loading diagram... Data Interpretation Taxonomy and Metric Computation

4. Data Interpretation (DI) Analytical Frameworks

Data Interpretation in CIL MT tests rapid data extraction and percentage comparisons from four primary display formats:

1. Table Charts

Data is arranged in row-by-column grids. Typical questions evaluate:

Row/Column Sums: Rapid grouping of values by round tens or hundreds.

Ratio Analysis: Expressing output of one division relative to another without high-precision decimals.

2. Bar Charts & Stacked Bars

Bars represent discrete categories (e.g., subsidiary-wise annual production in Million Tonnes). Visual height corresponds directly to magnitude.

3. Pie Charts (Angular vs. Percentage Mapping)

A full circular pie chart represents 100 % 100\% 100% of data distributed across 360 ∘ 360^{\circ} 36 0 ∘ : 100 % = 360 ∘ ⟺ 1 % = 3.6 ∘ ⟺ 1 ∘ = 10 36 % = 5 18 % 100\% = 360^{\circ} \iff 1\% = 3.6^{\circ} \iff 1^{\circ} = \frac{10}{36}\% = \frac{5}{18}\% 100% = 36 0 ∘ ⟺ 1% = 3. 6 ∘ ⟺ 1 ∘ = 36 10 ​ % = 18 5 ​ % Value of Sector = ( θ ∘ 360 ∘ ) × Total Value \text{Value of Sector} = \left(\frac{\theta^{\circ}}{360^{\circ}}\right) \times \text{Total Value} Value of Sector = ( 36 0 ∘ θ ∘ ​ ) × Total Value

4. Line Graphs & Trend Metrics

Used for continuous time series (monthly coal dispatches, overburden removal over years).

Percentage Increase / Decrease: Δ % = ( Value current − Value base Value base ) × 100 % \Delta\% = \left(\frac{\text{Value}_{\text{current}} - \text{Value}_{\text{base}}}{\text{Value}_{\text{base}}}\right) \times 100\% Δ% = ( Value base ​ Value current ​ − Value base ​ ​ ) × 100%

Compound Annual Growth Rate (CAGR) Approximation: CAGR = ( V final V initial ) 1 / n − 1 \text{CAGR} = \left(\frac{V_{\text{final}}}{V_{\text{initial}}}\right)^{1/n} - 1 CAGR = ( V initial ​ V final ​ ​ ) 1/ n − 1

Worked Example: Subsidiary Production Table

Consider annual coal dispatch data across five CIL subsidiaries:

  • Subsidiary 2024 Dispatch (MT) 2025 Dispatch (MT) Growth (MT) Growth Rate (%)
  • ECL 50.0 55.0 + 5.0 +5.0 + 5.0 + 10.00 % +10.00\% + 10.00%
  • BCCL 40.0 46.0 + 6.0 +6.0 + 6.0 + 15.00 % +15.00\% + 15.00%
  • CCL 60.0 72.0 + 12.0 +12.0 + 12.0 + 20.00 % +20.00\% + 20.00%
  • NCL 120.0 132.0 + 12.0 +12.0 + 12.0 + 10.00 % +10.00\% + 10.00%
  • SECL 150.0 165.0 + 15.0 +15.0 + 15.0 + 10.00 % +10.00\% + 10.00%
  • Total 420.0 470.0 +50.0 +11.90%

CCL achieved the highest individual growth rate ( 20.00 % 20.00\% 20.00% ).

SECL contributed the largest absolute incremental tonnage ( 15.0 MT 15.0\text{ MT} 15.0 MT ).

Total CIL dispatch grew by 50 420 × 100 % = 11.90 % \frac{50}{420} \times 100\% = 11.90\% 420 50 ​ × 100% = 11.90% .