Study guide
3.4 Direction Sense, Blood Relations & Order/Ranking
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
3.4 Direction Sense, Blood Relations & Order/Ranking
Key Takeaways Explain This Topic AI
The 8-point compass system maps into Cartesian coordinates where East is + x +x + x , West is − x -x − x , North is + y +y + y , and South is − y -y − y , simplifying multi-step path calculations.
Shortest straight-line displacement between initial and terminal points is strictly calculated using the Pythagorean theorem d = ( Δ x ) 2 + ( Δ y ) 2 d = \sqrt{(\Delta x)^2 + (\Delta y)^2} d = ( Δ x ) 2 + ( Δ y ) 2 .
Sunrise casts all shadows due West, while sunset casts all shadows due East; facing North at sunrise causes shadows to fall to one's Left.
Genealogical family tree modeling relies on standard generational tiers, gender tokens, and backward decoding for conversation-based 'pointing to' problems.
In linear ranking: Total T = L + R − 1 T = L + R - 1 T = L + R − 1 , non-overlapping intermediate count is T − ( L A + R B ) T - (L_A + R_B) T − ( L A + R B ) , and overlapping intermediate count is ( L A + R B ) − T − 2 (L_A + R_B) - T - 2 ( L A + R B ) − T − 2 .
Last updated: August 2026
Direction Sense, Blood Relations & Order/Ranking
Section 3.4 integrates three cornerstone modules of logical reasoning in the Coal India Limited Management Trainee selection test: Direction Sense and Spatial Orientation , Genealogical Blood Relations , and Order/Ranking Mechanics . These topics assess a candidate's spatial visualization, genealogical deconstruction, and discrete arithmetic modeling under timed conditions.
- 1. Direction Sense & Spatial Orientation Mechanics
- 1.1 The 8-Point Compass System and Cartesian Coordinate Mapping
Direction sense problems can be modeled either as vectors or on a standard Cartesian ( x , y ) (x, y) ( x , y ) coordinate plane where the initial starting origin is ( 0 , 0 ) (0, 0) ( 0 , 0 ) :
Cardinal Directions: North ( + y ) (+y) ( + y ) , South ( − y ) (-y) ( − y ) , East ( + x ) (+x) ( + x ) , West ( − x ) (-x) ( − x ) .
Intercardinal / Ordinal Directions: North-East ( + x , + y ) (+x, +y) ( + x , + y ) , North-West ( − x , + y ) (-x, +y) ( − x , + y ) , South-East ( + x , − y ) (+x, -y) ( + x , − y ) , South-West ( − x , − y ) (-x, -y) ( − x , − y ) .
Turn Mechanics:
Right Turn: + 90 ∘ +90^{\circ} + 9 0 ∘ Clockwise rotation.
Left Turn: + 90 ∘ +90^{\circ} + 9 0 ∘ Counter-Clockwise rotation ( 270 ∘ 270^{\circ} 27 0 ∘ CW).
- U-Turn / About Turn: 180 ∘ 180^{\circ} 18 0 ∘ reversal. NORTH (+y)
- |
- NW (-x, +y) | NE (+x, +y)
- \ | /
- \ | /
- \ | /
- WEST (-x) ------------+-------(0,0)-------+------------ EAST (+x)
- / | \
- / | \
- / | \
- SW (-x, -y) | SE (+x, -y)
- |
- SOUTH (-y)
- 1.2 The Pythagorean Shortest-Path Formulation
To calculate the direct shortest straight-line distance ( d d d ) between a starting origin ( x 0 , y 0 ) (x_0, y_0) ( x 0 , y 0 ) and a terminal stopping point ( x f , y f ) (x_f, y_f) ( x f , y f ) : d = ( Δ x ) 2 + ( Δ y ) 2 = ( x f − x 0 ) 2 + ( y f − y 0 ) 2 d = \sqrt{(\Delta x)^2 + (\Delta y)^2} = \sqrt{(x_f - x_0)^2 + (y_f - y_0)^2} d = ( Δ x ) 2 + ( Δ y ) 2 = ( x f − x 0 ) 2 + ( y f − y 0 ) 2 Direction of Endpoint relative to Origin = arctan ( Δ y Δ x ) \text{Direction of Endpoint relative to Origin} = \arctan\left(\frac{\Delta y}{\Delta x}\right) Direction of Endpoint relative to Origin = arctan ( Δ x Δ y )
1.3 Shadow and Solar Position Laws
Shadow questions depend strictly on the invariant trajectory of the sun across the sky:
- Time of Day Sun Position Direction Shadow is Cast Facing North Facing South Facing East Facing West
- Morning (Sunrise) East West Shadow to LEFT Shadow to RIGHT Shadow BEHIND Shadow IN FRONT
- Evening (Sunset) West East Shadow to RIGHT Shadow to LEFT Shadow IN FRONT Shadow BEHIND
Noon (12:00 PM) Overhead Negligible / None No lateral shadow No lateral shadow No lateral shadow No lateral shadow
Exam Shortcut: If two persons A A A and B B B stand facing each other at sunrise, and A A A 's shadow falls to the right of B B B , then B B B is facing North (since morning shadow falls to the West, which is to the right of someone looking South, wait: if shadow falls to the right of B, B must be facing South! If B faces South, West is B's right side. Therefore A A A faces North).
2. Blood Relations: Structural Genealogical Modeling
Blood relation puzzles require parsing complex familial networks. Standardized graphic symbols eliminate ambiguity.
- 2.1 Universal Genealogical Tree Notations
- Male: Represented by [ + ] [+] [ + ] or a Square □ \square □
- Female: Represented by [ − ] [-] [ − ] or a Circle ◯ \bigcirc ◯
- Marital Union (Spouses): Double horizontal parallel line ( = ) (=) ( = )
- Sibling Bond (Brother/Sister): Single horizontal solid line ( − ) (-) ( − )
Generational Descent: Vertical solid line ( ∣ ) (\mid) ( ∣ ) [Paternal Grandfather (+)] = [Paternal Grandmother (-)]
- |
- v
- [Uncle (+)] ----- [Father (+)] = [Mother (-)] ----- [Maternal Aunt (-)]
- |
- +---------------+---------------+
- | |
- v v
- [Brother (+)] [Self / Sister (-)]
- 2.2 Key Relational Lexicon
Paternal vs. Maternal: Paternal relates to Father's side (e.g., Paternal Uncle = Father's Brother); Maternal relates to Mother's side (e.g., Maternal Uncle = Mother's Brother).
Sibling Offspring: Nephew (Brother's or Sister's Son); Niece (Brother's or Sister's Daughter).
Affinal Relationships (By Marriage):
Sister-in-law: Brother's wife OR Spouse's sister.
Brother-in-law: Sister's husband OR Spouse's brother.
Father-in-law / Mother-in-law: Spouse's father / mother.
"Only Son of my Father": Refers to the speaker himself (if the speaker is male) or the speaker's brother (if the speaker is female).
"Only Child of my Father": Refers uniquely to the speaker.
2.3 Solving Archetypes
Conversational / "Pointing-to" Statements: Use the Backward Decoding Method . Deconstruct the sentence starting from the possessive pronoun "my" and work toward the subject. Example: "She is the daughter of the only son of my grandfather." \text{Example: } \text{"She is the daughter of the only son of my grandfather."} Example: "She is the daughter of the only son of my grandfather."
Step 1: "My grandfather" ⟹ \implies ⟹ Speaker's Grandfather.
Step 2: "The only son of my grandfather" ⟹ \implies ⟹ Speaker's Father.
Step 3: "Daughter of [Speaker's Father]" ⟹ \implies ⟹ Speaker's Sister.
Coded Blood Relations: Represent relations via operators (e.g., P + Q ⟹ P P + Q \implies P P + Q ⟹ P is father of Q Q Q ; P − Q ⟹ P P - Q \implies P P − Q ⟹ P is mother of Q Q Q ; P × Q ⟹ P P \times Q \implies P P × Q ⟹ P is sister of Q Q Q ). Solve using:
Gender Elimination: Immediately rule out options where the target person's required gender contradicts the operator.
Generation Gap Count ( Δ G \Delta G Δ G ): Assign generation values ( + 1 +1 + 1 for parent, 0 0 0 for sibling/spouse, − 1 -1 − 1 for child) and sum them across the string.
3. Order & Ranking Formulations & Principles
Order and ranking questions require establishing an exact numerical count of elements in a linear queue from directional endpoints (Left/Top vs Right/Bottom).
3.1 Total Number of Persons in a Single Row ( T T T )
When the rank of a single individual A A A is known from both ends of a line: T = L A + R A − 1 T = L_A + R_A - 1 T = L A + R A − 1 Rearranged: L A = T − R A + 1 , R A = T − L A + 1 \text{Rearranged:} \quad L_A = T - R_A + 1, \qquad R_A = T - L_A + 1 Rearranged: L A = T − R A + 1 , R A = T − L A + 1
Why − 1 -1 − 1 ? Because person A A A is counted twice: once from the left and once from the right.
3.2 Finding the Number of Persons Between Two Individuals
Let person A A A be at rank L A L_A L A from the left, and person B B B be at rank R B R_B R B from the right in a row of total size T T T .
Case 1: Simple / Non-Overlapping Case ( T > L A + R B T > L_A + R_B T > L A + R B )
When the sum of individual ranks is strictly less than the total count, there is an unoccupied gap between them: Persons Between A and B = T − ( L A + R B ) \text{Persons Between } A \text{ and } B = T - (L_A + R_B) Persons Between A and B = T − ( L A + R B )
Case 2: Overlapping Case ( T < L A + R B T < L_A + R_B T < L A + R B )
When the sum of ranks exceeds the total row capacity, the paths of A A A and B B B cross each other: Persons Between A and B = ( L A + R B ) − T − 2 \text{Persons Between } A \text{ and } B = (L_A + R_B) - T - 2 Persons Between A and B = ( L A + R B ) − T − 2
Why − 2 -2 − 2 ? Because both persons A A A and B B B have been counted twice during the overlapping sweep.
3.3 Position Swapping (Interchange Mechanism)
Suppose A A A is at position L A L_A L A from the left and B B B is at position R B R_B R B from the right. After interchanging positions, A A A occupies B B B 's original seat and is now at position L A ′ L_A' L A ′ from the left. Total Persons in Row ( T ) = L A ′ + R B − 1 \text{Total Persons in Row } (T) = L_A' + R_B - 1 Total Persons in Row ( T ) = L A ′ + R B − 1 New Rank of B from Right ( R B ′ ) = R B + ( L A ′ − L A ) = T − L A + 1 \text{New Rank of } B \text{ from Right } (R_B') = R_B + (L_A' - L_A) = T - L_A + 1 New Rank of B from Right ( R B ′ ) = R B + ( L A ′ − L A ) = T − L A + 1 Number of Persons Between A and B = ∣ L A ′ − L A ∣ − 1 \text{Number of Persons Between } A \text{ and } B = |L_A' - L_A| - 1 Number of Persons Between A and B = ∣ L A ′ − L A ∣ − 1
4. Master Comparison and Ranking Formulas Summary
Operational Scenario Governing Mathematical Formula Key Boundary Condition
Total from Single Person T = L A + R A − 1 T = L_A + R_A - 1 T = L A + R A − 1 Same individual measured from both ends
Rank from Opposite End R A = T − L A + 1 R_A = T - L_A + 1 R A = T − L A + 1 Total T T T and one end rank L A L_A L A must be known
Between (Non-Overlapping) Gap = T − ( L A + R B ) \text{Gap} = T - (L_A + R_B) Gap = T − ( L A + R B ) T > ( L A + R B ) T > (L_A + R_B) T > ( L A + R B )
Between (Overlapping) Gap = ( L A + R B ) − T − 2 \text{Gap} = (L_A + R_B) - T - 2 Gap = ( L A + R B ) − T − 2 T < ( L A + R B ) T < (L_A + R_B) T < ( L A + R B )
Total after Position Swap T = L A ′ + R B − 1 T = L_A' + R_B - 1 T = L A ′ + R B − 1 L A ′ L_A' L A ′ is new left rank, R B R_B R B is old right rank
Distance via Coordinates d = ( Δ x ) 2 + ( Δ y ) 2 d = \sqrt{(\Delta x)^2 + (\Delta y)^2} d = ( Δ x ) 2 + ( Δ y ) 2 Orthogonal Cartesian movement
- 5. Comprehensive Step-by-Step Worked Problems
- Worked Example 1: Multi-Segment Direction & Distance
Scenario: A mining surveyor starts at the central pit office ( 0 , 0 ) (0, 0) ( 0 , 0 ) and travels 12 km 12\text{ km} 12 km due North to Shaft A. He then turns 90 ∘ 90^{\circ} 9 0 ∘ East and travels 8 km 8\text{ km} 8 km to Substation B. He then turns 90 ∘ 90^{\circ} 9 0 ∘ South and travels 6 km 6\text{ km} 6 km to Workshop C. Finally, he turns 90 ∘ 90^{\circ} 9 0 ∘ East and travels 7 km 7\text{ km} 7 km to the Main Weighbridge D.
Step-by-Step Coordinate Tracking:
- Origin: ( x 0 , y 0 ) = ( 0 , 0 ) (x_0, y_0) = (0, 0) ( x 0 , y 0 ) = ( 0 , 0 )
- North 12 km ⟹ ( 0 , + 12 ) 12\text{ km} \implies (0, +12) 12 km ⟹ ( 0 , + 12 )
East 8 km ⟹ ( 0 + 8 , + 12 ) = ( 8 , 12 ) 8\text{ km} \implies (0 + 8, +12) = (8, 12) 8 km ⟹ ( 0 + 8 , + 12 ) = ( 8 , 12 )
South 6 km ⟹ ( 8 , 12 − 6 ) = ( 8 , 6 ) 6\text{ km} \implies (8, 12 - 6) = (8, 6) 6 km ⟹ ( 8 , 12 − 6 ) = ( 8 , 6 )
East 7 km ⟹ ( 8 + 7 , 6 ) = ( 15 , 6 ) 7\text{ km} \implies (8 + 7, 6) = (15, 6) 7 km ⟹ ( 8 + 7 , 6 ) = ( 15 , 6 ) Net Displacement: Δ x = 15 − 0 = 15 km , Δ y = 6 − 0 = 6 km \text{Net Displacement: } \Delta x = 15 - 0 = 15\text{ km}, \quad \Delta y = 6 - 0 = 6\text{ km} Net Displacement: Δ x = 15 − 0 = 15 km , Δ y = 6 − 0 = 6 km Shortest Straight-Line Distance: d = 15 2 + 6 2 = 225 + 36 = 261 ≈ 16.155 km \text{Shortest Straight-Line Distance: } d = \sqrt{15^2 + 6^2} = \sqrt{225 + 36} = \sqrt{261} \approx 16.155\text{ km} Shortest Straight-Line Distance: d = 1 5 2 + 6 2 = 225 + 36 = 261 ≈ 16.155 km Final Direction relative to Origin: North-East (First Quadrant) \text{Final Direction relative to Origin:} \quad \text{North-East (First Quadrant)} Final Direction relative to Origin: North-East (First Quadrant)
Worked Example 2: Coded Blood Relations with Generational Gap Analysis
Scenario: Let:
P # Q ⟹ P is the father of Q ( Δ G = + 1 , Male ) P \# Q \implies P \text{ is the father of } Q \quad (\Delta G = +1, \text{ Male}) P # Q ⟹ P is the father of Q ( Δ G = + 1 , Male )
P $ Q ⟹ P is the mother of Q ( Δ G = + 1 , Female ) P \text{\textdollar} Q \implies P \text{ is the mother of } Q \quad (\Delta G = +1, \text{ Female}) P $ Q ⟹ P is the mother of Q ( Δ G = + 1 , Female )
P & Q ⟹ P is the sister of Q ( Δ G = 0 , Female ) P \& Q \implies P \text{ is the sister of } Q \quad (\Delta G = 0, \text{ Female}) P & Q ⟹ P is the sister of Q ( Δ G = 0 , Female )
P @ Q ⟹ P is the brother of Q ( Δ G = 0 , Male ) P @ Q \implies P \text{ is the brother of } Q \quad (\Delta G = 0, \text{ Male}) P @ Q ⟹ P is the brother of Q ( Δ G = 0 , Male )
Expression: M # N & O @ P $ Q M \# N \& O @ P \text{\textdollar} Q M # N & O @ P $ Q Task: Determine the exact relationship of M M M to Q Q Q .
Step-by-Step Deconstruction:
M # N ⟹ M M \# N \implies M M # N ⟹ M is Father of N N N ( M M M is male, Δ G = + 1 \Delta G = +1 Δ G = + 1 ).
N & O ⟹ N N \& O \implies N N & O ⟹ N is Sister of O O O ( N N N is female, Δ G = 0 \Delta G = 0 Δ G = 0 ).
O @ P ⟹ O O @ P \implies O O @ P ⟹ O is Brother of P P P ( O O O is male, Δ G = 0 \Delta G = 0 Δ G = 0 ).
Therefore, N , O , P N, O, P N , O , P are full siblings, all children of Father M M M .
P $ Q ⟹ P P \text{\textdollar} Q \implies P P $ Q ⟹ P is Mother of Q Q Q ( P P P is female, Δ G = + 1 \Delta G = +1 Δ G = + 1 ).
Total Generation Gap from M M M down to Q Q Q : Δ G = + 1 + 0 + 0 + 1 = + 2 \Delta G = +1 + 0 + 0 + 1 = +2 Δ G = + 1 + 0 + 0 + 1 = + 2 .
Since M M M is the father of P P P , and P P P is the mother of Q Q Q , M M M is the Maternal Grandfather of Q Q Q .