Study guide

6.9 Laplace Transforms & Transfer-Function Methods

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

6.9 Laplace Transforms & Transfer-Function Methods

Key Takeaways Explain This Topic AI

The Laplace transform converts a differential equation in time into an algebraic equation in s, so initial conditions are absorbed automatically rather than fitted afterwards.

The transform of the nth derivative is s^n F(s) minus a chain of initial-condition terms, which is the property that makes the method work for initial-value problems.

The first shifting theorem states that multiplying a time function by e^(-at) replaces s by s + a in the transform, and the second shifting theorem handles delayed functions.

The initial and final value theorems read the response at t = 0 and t = infinity directly from s F(s) without inverting the transform at all.

Last updated: August 2026

Definition and Purpose

The Laplace transform of a function f ( t ) f(t) f ( t ) defined for t ≥ 0 t \geq 0 t ≥ 0 is L { f ( t ) } = F ( s ) = ∫ 0 ∞ e − s t f ( t ) d t \mathcal{L}\{f(t)\} = F(s) = \int_{0}^{\infty} e^{-st}f(t)\,dt L { f ( t )} = F ( s ) = ∫ 0 ∞ ​ e − s t f ( t ) d t

provided the integral converges. The point of the transform is structural: differentiation in the time domain becomes multiplication by s s s in the transform domain. A differential equation therefore becomes an algebraic equation, which is solved by ordinary algebra and then inverted.

This is why the transform dominates control and vibration analysis — and why it is listed in the same syllabus bullet as differential equations.

Standard Transform Pairs

  • f ( t ) f(t) f ( t ) F ( s ) F(s) F ( s ) Region
  • 1 1 1 1 s \dfrac{1}{s} s 1 ​ s > 0 s > 0 s > 0
  • t n t^{n} t n n ! s n + 1 \dfrac{n!}{s^{n+1}} s n + 1 n ! ​ s > 0 s > 0 s > 0
  • e a t e^{at} e a t 1 s − a \dfrac{1}{s-a} s − a 1 ​ s > a s > a s > a
  • sin ⁡ ω t \sin \omega t sin ω t ω s 2 + ω 2 \dfrac{\omega}{s^2 + \omega^2} s 2 + ω 2 ω ​ s > 0 s > 0 s > 0
  • cos ⁡ ω t \cos \omega t cos ω t s s 2 + ω 2 \dfrac{s}{s^2 + \omega^2} s 2 + ω 2 s ​ s > 0 s > 0 s > 0

sinh ⁡ a t \sinh at sinh a t a s 2 − a 2 \dfrac{a}{s^2 - a^2} s 2 − a 2 a ​ s > ∣ a ∣ s > \lvert a\rvert s > ∣ a ∣

cosh ⁡ a t \cosh at cosh a t s s 2 − a 2 \dfrac{s}{s^2 - a^2} s 2 − a 2 s ​ s > ∣ a ∣ s > \lvert a\rvert s > ∣ a ∣

  • δ ( t ) \delta(t) δ ( t ) (unit impulse) 1 1 1 all s s s
  • u ( t ) u(t) u ( t ) (unit step) 1 s \dfrac{1}{s} s 1 ​ s > 0 s > 0 s > 0

Note the sign distinction between the circular and hyperbolic pairs — s 2 + ω 2 s^2 + \omega^2 s 2 + ω 2 versus s 2 − a 2 s^2 - a^2 s 2 − a 2 — which is a favourite objective-item discriminator.

The Derivative Property

Integrating the definition by parts gives L { f ′ ( t ) } = s F ( s ) − f ( 0 ) \mathcal{L}\{f'(t)\} = sF(s) - f(0) L { f ′ ( t )} = s F ( s ) − f ( 0 ) L { f ′ ′ ( t ) } = s 2 F ( s ) − s f ( 0 ) − f ′ ( 0 ) \mathcal{L}\{f''(t)\} = s^2F(s) - sf(0) - f'(0) L { f ′′ ( t )} = s 2 F ( s ) − s f ( 0 ) − f ′ ( 0 )

and in general L { f ( n ) ( t ) } = s n F ( s ) − s n − 1 f ( 0 ) − ⋯ − f ( n − 1 ) ( 0 ) \mathcal{L}\{f^{(n)}(t)\} = s^{n}F(s) - s^{n-1}f(0) - \cdots - f^{(n-1)}(0) L { f ( n ) ( t )} = s n F ( s ) − s n − 1 f ( 0 ) − ⋯ − f ( n − 1 ) ( 0 )

The initial conditions enter the algebra directly. This is the decisive practical advantage over the complementary-function method, where constants must be fitted to boundary conditions at the very end.

Shifting Theorems

First shifting (frequency shift). Multiplying by a decaying exponential shifts the transform: L { e − a t f ( t ) } = F ( s + a ) \mathcal{L}\{e^{-at}f(t)\} = F(s + a) L { e − a t f ( t )} = F ( s + a )

So L { e − a t sin ⁡ ω t } = ω ( s + a ) 2 + ω 2 \mathcal{L}\{e^{-at}\sin\omega t\} = \dfrac{\omega}{(s+a)^2 + \omega^2} L { e − a t sin ω t } = ( s + a ) 2 + ω 2 ω ​ — precisely the transform of a damped oscillation.

Second shifting (time delay). For a function switched on at t = a t = a t = a : L { f ( t − a ) u ( t − a ) } = e − a s F ( s ) \mathcal{L}\{f(t-a)u(t-a)\} = e^{-as}F(s) L { f ( t − a ) u ( t − a )} = e − a s F ( s )

A pure time delay multiplies the transform by e − a s e^{-as} e − a s , which is how transport lag in a conveyor or a pipeline is modelled.

Further Operational Theorems

Multiplication by t t t : L { t f ( t ) } = − d F ( s ) d s \mathcal{L}\{t\,f(t)\} = -\frac{dF(s)}{ds} L { t f ( t )} = − d s d F ( s ) ​

Division by t t t : L { f ( t ) t } = ∫ s ∞ F ( u ) d u \mathcal{L}\left\{\frac{f(t)}{t}\right\} = \int_{s}^{\infty}F(u)\,du L { t f ( t ) ​ } = ∫ s ∞ ​ F ( u ) d u

Transform of an integral: L { ∫ 0 t f ( τ ) d τ } = F ( s ) s \mathcal{L}\left\{\int_0^t f(\tau)\,d\tau\right\} = \frac{F(s)}{s} L { ∫ 0 t ​ f ( τ ) d τ } = s F ( s ) ​

Convolution theorem. The inverse transform of a product is the convolution of the individual inverses: L − 1 { F ( s ) G ( s ) } = ∫ 0 t f ( τ ) g ( t − τ ) d τ \mathcal{L}^{-1}\{F(s)G(s)\} = \int_0^t f(\tau)g(t-\tau)\,d\tau L − 1 { F ( s ) G ( s )} = ∫ 0 t ​ f ( τ ) g ( t − τ ) d τ

This is the formal statement that a system's output equals its impulse response convolved with the input.

Initial and Final Value Theorems

These two results extract the endpoints of the response without any inversion at all: f ( 0 + ) = lim ⁡ s → ∞ s F ( s ) , f ( ∞ ) = lim ⁡ s → 0 s F ( s ) f(0^+) = \lim_{s\to\infty} sF(s), \qquad f(\infty) = \lim_{s\to 0} sF(s) f ( 0 + ) = s → ∞ lim ​ s F ( s ) , f ( ∞ ) = s → 0 lim ​ s F ( s )

The final value theorem is valid only if the system is stable , that is, if all poles of s F ( s ) sF(s) s F ( s ) lie in the left half-plane. Applying it to an oscillatory or growing response gives a meaningless answer, and objective items exploit exactly that.

Inverse Transforms by Partial Fractions

Inversion in practice means splitting F ( s ) F(s) F ( s ) into standard pairs. For F ( s ) = s + 5 ( s + 1 ) ( s + 3 ) F(s) = \frac{s + 5}{(s+1)(s+3)} F ( s ) = ( s + 1 ) ( s + 3 ) s + 5 ​

write A s + 1 + B s + 3 \dfrac{A}{s+1} + \dfrac{B}{s+3} s + 1 A ​ + s + 3 B ​ . Multiplying out gives s + 5 = A ( s + 3 ) + B ( s + 1 ) s + 5 = A(s+3) + B(s+1) s + 5 = A ( s + 3 ) + B ( s + 1 ) . Setting s = − 1 s = -1 s = − 1 gives 4 = 2 A 4 = 2A 4 = 2 A , so A = 2 A = 2 A = 2 ; setting s = − 3 s = -3 s = − 3 gives 2 = − 2 B 2 = -2B 2 = − 2 B , so B = − 1 B = -1 B = − 1 . Hence f ( t ) = 2 e − t − e − 3 t f(t) = 2e^{-t} - e^{-3t} f ( t ) = 2 e − t − e − 3 t

Worked Example: Damped Free Vibration

Solve x ′ ′ + 3 x ′ + 2 x = 0 x'' + 3x' + 2x = 0 x ′′ + 3 x ′ + 2 x = 0 with x ( 0 ) = 1 x(0) = 1 x ( 0 ) = 1 and x ′ ( 0 ) = 0 x'(0) = 0 x ′ ( 0 ) = 0 .

Transforming and inserting the initial conditions: [ s 2 X − s ( 1 ) − 0 ] + 3 [ s X − 1 ] + 2 X = 0 \left[s^2X - s(1) - 0\right] + 3\left[sX - 1\right] + 2X = 0 [ s 2 X − s ( 1 ) − 0 ] + 3 [ s X − 1 ] + 2 X = 0 X ( s 2 + 3 s + 2 ) = s + 3 ⟹ X = s + 3 ( s + 1 ) ( s + 2 ) X(s^2 + 3s + 2) = s + 3 \quad \Longrightarrow \quad X = \frac{s+3}{(s+1)(s+2)} X ( s 2 + 3 s + 2 ) = s + 3 ⟹ X = ( s + 1 ) ( s + 2 ) s + 3 ​

Partial fractions give X = 2 s + 1 − 1 s + 2 X = \dfrac{2}{s+1} - \dfrac{1}{s+2} X = s + 1 2 ​ − s + 2 1 ​ , so x ( t ) = 2 e − t − e − 2 t x(t) = 2e^{-t} - e^{-2t} x ( t ) = 2 e − t − e − 2 t

Both exponents are negative, confirming a stable, over-damped return to equilibrium — consistent with c 2 = 9 > 4 m k = 8 c^2 = 9 > 4mk = 8 c 2 = 9 > 4 mk = 8 . Checking the initial value theorem: lim ⁡ s → ∞ s X = lim ⁡ s ( s + 3 ) / ( s 2 + 3 s + 2 ) = 1 \lim_{s\to\infty} sX = \lim s(s+3)/(s^2+3s+2) = 1 lim s → ∞ ​ s X = lim s ( s + 3 ) / ( s 2 + 3 s + 2 ) = 1 , which matches x ( 0 ) = 1 x(0) = 1 x ( 0 ) = 1 .

Transfer Functions and System Response

For a system at rest initially, the ratio of the transform of the output to the transform of the input is the transfer function : G ( s ) = Y ( s ) X ( s ) G(s) = \frac{Y(s)}{X(s)} G ( s ) = X ( s ) Y ( s ) ​

For the mass-spring-damper driven by a force F ( t ) F(t) F ( t ) , transforming m x ¨ + c x ˙ + k x = F m\ddot x + c\dot x + kx = F m x ¨ + c x ˙ + k x = F with zero initial conditions gives G ( s ) = X ( s ) F ( s ) = 1 m s 2 + c s + k G(s) = \frac{X(s)}{F(s)} = \frac{1}{ms^2 + cs + k} G ( s ) = F ( s ) X ( s ) ​ = m s 2 + cs + k 1 ​

Writing this in the standard second-order form, G ( s ) = 1 / k s 2 ω n 2 + 2 ζ s ω n + 1 , ω n = k m , ζ = c 2 m k G(s) = \frac{1/k}{\dfrac{s^2}{\omega_n^2} + \dfrac{2\zeta s}{\omega_n} + 1}, \qquad \omega_n = \sqrt{\frac{k}{m}}, \quad \zeta = \frac{c}{2\sqrt{mk}} G ( s ) = ω n 2 ​ s 2 ​ + ω n ​ 2 ζ s ​ + 1 1/ k ​ , ω n ​ = m k ​ ​ , ζ = 2 mk ​ c ​

exposes the two parameters that govern every second-order system: the undamped natural frequency and the damping ratio .

Poles and stability

The poles are the roots of the denominator, and they determine the character of the response entirely:

  • Pole location Response
  • Both real and negative Over-damped decay
  • Repeated real negative Critically damped
  • Complex pair with negative real part Decaying oscillation
  • Purely imaginary pair Sustained oscillation; marginally stable
  • Any pole with positive real part Unstable ; response grows without bound

The rule is compact and worth memorising: a system is stable if and only if all poles lie in the left half of the s-plane. The real part sets the rate of decay and the imaginary part sets the frequency of oscillation.

Standard Test Inputs

  • Input x ( t ) x(t) x ( t ) X ( s ) X(s) X ( s )
  • Impulse δ ( t ) \delta(t) δ ( t ) 1 1 1
  • Step of height A A A A u ( t ) A\,u(t) A u ( t ) A / s A/s A / s
  • Ramp of slope A A A A t A\,t A t A / s 2 A/s^2 A / s 2
  • Sinusoid A sin ⁡ ω t A\sin\omega t A sin ω t A ω / ( s 2 + ω 2 ) A\omega/(s^2+\omega^2) A ω / ( s 2 + ω 2 )

Because the impulse transform is simply 1, the transform of the impulse response is the transfer function itself — which is why the impulse response characterises a linear system completely.

Worked example. Find the steady-state deflection of the mass-spring-damper under a step force of magnitude F 0 F_0 F 0 ​ . X ( s ) = G ( s ) F 0 s = F 0 s ( m s 2 + c s + k ) X(s) = G(s)\frac{F_0}{s} = \frac{F_0}{s\left(ms^2+cs+k\right)} X ( s ) = G ( s ) s F 0 ​ ​ = s ( m s 2 + cs + k ) F 0 ​ ​

Applying the final value theorem, valid here because the system is stable: x ( ∞ ) = lim ⁡ s → 0 s X ( s ) = F 0 k x(\infty) = \lim_{s\to0} s\,X(s) = \frac{F_0}{k} x ( ∞ ) = s → 0 lim ​ s X ( s ) = k F 0 ​ ​

The steady-state deflection is simply the static deflection F 0 / k F_0/k F 0 ​ / k , entirely independent of the mass and the damping. Those two parameters govern how the system reaches that value — overshoot, oscillation and settling time — but not the final value itself. This separation between transient behaviour and steady-state value is one of the most useful ideas the transform provides, and it carries directly into the vibration and control content of Paper-II.