Study guide

7.2 Plane Trusses, Friction Mechanics & Screws/Wedges

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

7.2 Plane Trusses, Friction Mechanics & Screws/Wedges

Key Takeaways Explain This Topic AI

A plane truss is statically determinate and rigid if m = 2j - 3; it behaves as an unstable mechanism if m < 2j - 3 and is statically indeterminate (redundant) if m > 2j - 3.

Zero-force members can be identified by rapid inspection: (1) two non-collinear members at an unloaded joint carry zero force, (2) three members at an unloaded joint where two are collinear require the third non-collinear member to carry zero force.

Coulomb's dry friction states that limiting friction is F_lim = μs * N, and the angle of friction φ = tan⁻¹(μs) is mathematically identical to the angle of repose θ_repose.

A rigid block on an inclined plane slips before tipping if the aspect ratio satisfies h/b < 1/μ, and tips before slipping if h/b > 1/μ.

A square-threaded power screw is self-locking when the friction angle exceeds or equals the lead angle (φ ≥ α); its theoretical maximum efficiency is η_max = (1 - sin φ) / (1 + sin φ).

Last updated: August 2026

6.2 Plane Trusses, Friction Mechanics & Screws/Wedges

In mining engineering and heavy industrial plant infrastructure, structural trusses support mine headframes, conveyor gantries, and coal handling plant (CHP) roofs, while friction mechanics governs haul road vehicle stability, wedge-based coal splitters, and power screw hoists. Understanding the governing equations for pin-jointed frameworks and friction-driven mechanical drives is critical for CIL MT aspirants.

1. Plane Trusses: Structural Fundamentals

A truss is a triangulated structure composed of slender structural members interconnected at their ends by joints. A plane truss lies entirely in a two-dimensional plane and carries in-plane loads.

Core Engineering Assumptions for Ideal Trusses

Pin-Jointed Connections: All joints are treated as frictionless, smooth cylindrical pins.

Two-Force Members: All members are straight, slender, and subjected to loads applied exclusively at the joints (nodes) . Consequently, every member carries only axial tension ( T T T ) or axial compression ( C C C ), with zero bending moment and zero transverse shear force.

Negligible Member Weight: The self-weight of members is negligible compared to applied external loads (or split equally as lumped loads at bounding joints). Tension Member: Pulled at ends, pulls on joints

[Joint A] ◄───(Member in Tension)───► [Joint B]

  • Compression Member: Pushed at ends, pushes on joints
  • [Joint A] ───►(Member in Compression)◄─── [Joint B]
  • 2. Determinacy and Stability of Plane Trusses

Let m m m be the number of members, j j j be the number of joints, and r r r be the number of external support reactions (for a standard statically determinate support system, r = 3 r = 3 r = 3 ):

Plane Truss Determinacy Criteria ( m = 2 j − 3 m = 2j - 3 m = 2 j − 3 )

Member-Joint Relation Structural Classification Physical Behavior

m = 2 j − 3 m = 2j - 3 m = 2 j − 3 Perfect / Statically Determinate Rigid, stable framework; solvable completely using equations of static equilibrium.

m < 2 j − 3 m < 2j - 3 m < 2 j − 3 Deficient / Mechanism Non-rigid, unstable; collapses under general external loading.

m > 2 j − 3 m > 2j - 3 m > 2 j − 3 Redundant / Indeterminate Statically indeterminate internally; degree of internal redundancy D i = m − ( 2 j − 3 ) D_i = m - (2j - 3) D i ​ = m − ( 2 j − 3 ) . Requires compatibility equations.

Note for Space Trusses (3D): Determinacy condition is m = 3 j − 6 m = 3j - 6 m = 3 j − 6 .

  • 3. Analysis Methods for Plane Trusses ┌────────────────────────────────────────┐
  • │ Truss Analysis Methodology │
  • └───────────────────┬────────────────────┘
  • │
  • ┌──────────────────────────┴──────────────────────────┐
  • │ │
  • ┌──────────▼──────────┐ ┌──────────▼──────────┐
  • │ Method of Joints │ │ Method of Sections │
  • └──────────┬──────────┘ └──────────┬──────────┘
  • │ │
  • Isolates single nodes • Cuts across ≤ 3 members
  • Applies ΣFx = 0, ΣFy = 0 • Applies ΣFx=0, ΣFy=0, ΣMO=0
  • Solves ≤ 2 unknown forces/node • Direct solution for specific member
  • Best for ALL member forces • Best for targeted internal forces
  • Method of Joints

Solve for external support reactions using global equilibrium ( Σ F x = 0 , Σ F y = 0 , Σ M = 0 \Sigma F_x = 0, \Sigma F_y = 0, \Sigma M = 0 Σ F x ​ = 0 , Σ F y ​ = 0 , Σ M = 0 ).

Select a joint with at most two unknown member forces and at least one known applied load or reaction.

Draw the joint FBD, assuming all unknown member forces are in tension (pointing away from joint). A negative result indicates compression.

Apply Σ F x = 0 \Sigma F_x = 0 Σ F x ​ = 0 and Σ F y = 0 \Sigma F_y = 0 Σ F y ​ = 0 . Progress sequentially across the truss.

Method of Sections (Ritter's Method)

Pass an imaginary cutting line through the truss, slicing not more than three non-concurrent, non-parallel members including the target member.

Isolate one side of the severed truss (left or right portion).

Apply the three rigid body equilibrium equations: Σ F x = 0 , Σ F y = 0 , Σ M O = 0 \Sigma F_x = 0, \Sigma F_y = 0, \Sigma M_O = 0 Σ F x ​ = 0 , Σ F y ​ = 0 , Σ M O ​ = 0 .

Taking moments about the intersection point of two unknown severed members yields the force in the third member directly in a single step.

4. Zero-Force Member Inspection Rules

Identifying zero-force members by inspection saves immense calculation time in competitive exams: Rule 1: Two non-collinear members, no load Rule 2: Three members, two collinear, no load

  • Member 1 Member 1 ────┬──── Member 2 (Collinear)
  • / │
  • / (θ ≠ 180°) │ Member 3 (F3 = 0)
  • * Joint (No external load) ▼
  • \
  • \ Member 2 Result: F3 = 0, F1 = F2

Result: F1 = 0 and F2 = 0

Rule 1 (Two-Member Joint): If only two non-collinear members meet at an unloaded joint, the force in both members is zero ( F 1 = 0 , F 2 = 0 F_1 = 0, F_2 = 0 F 1 ​ = 0 , F 2 ​ = 0 ).

Rule 2 (Three-Member Joint with Collinear Pair): If three members meet at an unloaded joint and two members are collinear, the third non-collinear member is a zero-force member ( F 3 = 0 F_3 = 0 F 3 ​ = 0 ), and the two collinear members carry equal forces ( F 1 = F 2 F_1 = F_2 F 1 ​ = F 2 ​ ).

Rule 3 (Two Members with External Load): If two non-collinear members meet at a joint with an external load aligned collinearly with one member, the other non-aligned member is a zero-force member .

5. Coulomb's Laws of Dry Friction

Dry friction (Coulomb friction) arises from microscopic surface asperities resisting tangential sliding motion between contacting solid bodies. Friction Force (F)

  • ▲
  • │ Limiting Friction (F_lim = μs * N)
  • │ /│
  • │ / ┼───────────────────────── Kinetic Friction (Fk = μk * N)
  • │ / │
  • │ Static Region / │ Dynamic / Kinetic Region
  • │ (F ≤ μs * N) / │ (F = μk * N, nearly constant)
  • │ F = Applied Force P / │
  • │ / │
  • └─────────────────────┴───────┴────────────────────────► Applied Tangential Force (P)
  • Impending Motion
  • Key Parameters

Static Friction Force: 0 ≤ F s ≤ F lim 0 \le F_s \le F_{\text{lim}} 0 ≤ F s ​ ≤ F lim ​ , where F s F_s F s ​ is self-adjusting to match applied shear.

Limiting Static Friction: F lim = μ s N F_{\text{lim}} = \mu_s N F lim ​ = μ s ​ N .

Kinetic (Dynamic) Friction: F k = μ k N F_k = \mu_k N F k ​ = μ k ​ N , where μ k < μ s \mu_k < \mu_s μ k ​ < μ s ​ .

Angle of Friction ( ϕ \phi ϕ ): The angle between the resultant contact reaction R ⃗ \vec{R} R and the surface normal N ⃗ \vec{N} N at impending motion: tan ⁡ ϕ = F lim N = μ s N N = μ s ⟹ ϕ = tan ⁡ − 1 ( μ s ) \tan\phi = \frac{F_{\text{lim}}}{N} = \frac{\mu_s N}{N} = \mu_s \implies \phi = \tan^{-1}(\mu_s) tan ϕ = N F lim ​ ​ = N μ s ​ N ​ = μ s ​ ⟹ ϕ = tan − 1 ( μ s ​ )

Cone of Friction: A cone of apex angle 2 ϕ 2\phi 2 ϕ generated around the normal. If the resultant contact force lies inside the cone of friction, motion cannot occur.

Angle of Repose ( θ repose \theta_{\text{repose}} θ repose ​ ): The maximum inclination angle of a rough plane with the horizontal at which a block rests in limiting equilibrium under gravity alone without sliding down: m g sin ⁡ θ repose = F lim = μ s ( m g cos ⁡ θ repose ) ⟹ tan ⁡ θ repose = μ s ⟹ θ repose = ϕ mg \sin\theta_{\text{repose}} = F_{\text{lim}} = \mu_s (mg \cos\theta_{\text{repose}}) \implies \tan\theta_{\text{repose}} = \mu_s \implies \theta_{\text{repose}} = \phi m g sin θ repose ​ = F lim ​ = μ s ​ ( m g cos θ repose ​ ) ⟹ tan θ repose ​ = μ s ​ ⟹ θ repose ​ = ϕ

6. Slipping vs. Tipping (Overturning) Mechanics

For a rectangular block of width b b b , height h h h , and mass m m m on a horizontal rough surface subjected to a horizontal force P P P applied at height y y y : ┌─────────── b ───────────┐

  • │ │
  • │ ┌───┐ │
  • P ──────────┼─────────┤ G ├───────────┤ (Height y)
  • │ └───┘ │
  • │ │ │ Height h
  • │ │ mg │
  • └───────────┼─────────────┘
  • │ ▲ N
  • ◄─────┴───────┤ (At corner for impending tipping)
  • F_friction │

Condition for Impending Slipping: P slip = μ s m g P_{\text{slip}} = \mu_s mg P slip ​ = μ s ​ m g .

Condition for Impending Tipping: Taking moments about the bottom tipping edge: P tip ⋅ y = m g l e f t ( b 2 r i g h t ) ⟹ P tip = m g l e f t ( b 2 y r i g h t ) P_{\text{tip}} \cdot y = mg \\left(\frac{b}{2}\\right) \implies P_{\text{tip}} = mg \\left(\frac{b}{2y}\\right) P tip ​ ⋅ y = m g l e f t ( 2 b ​ r i g h t ) ⟹ P tip ​ = m g l e f t ( 2 y b ​ r i g h t )

Governing Failure Mode:

If P slip < P tip ⟹ μ s < b 2 y P_{\text{slip}} < P_{\text{tip}} \implies \mu_s < \frac{b}{2y} P slip ​ < P tip ​ ⟹ μ s ​ < 2 y b ​ , the block slips before tipping .

If P tip < P slip ⟹ b 2 y < μ s P_{\text{tip}} < P_{\text{slip}} \implies \frac{b}{2y} < \mu_s P tip ​ < P slip ​ ⟹ 2 y b ​ < μ s ​ , the block tips before slipping .

For force applied at top edge ( y = h y = h y = h ), slip occurs first when h b < 1 2 μ s \frac{h}{b} < \frac{1}{2\mu_s} b h ​ < 2 μ s ​ 1 ​ .

7. Wedge Mechanics

A wedge is a simple machine used to lift heavy loads or tighten machine components via small driving forces. ┌──────────────────────┐

  • │ Block (W) │ ◄─── Constrained vertically
  • │ │
  • └──────────┬───────────┘
  • /│ R2 (Reaction at inclined face, inclined by φ2)
  • / │
  • ┌────────/ │
  • Drive Force P ──┼► Wedge │ θ│ (Wedge taper angle θ)
  • └────────┴──┘
  • ───────────────────────── R1 (Floor reaction, inclined by φ1)
  • Analytical Equilibrium of Wedge and Block

At impending motion (wedge driven forward to raise block of weight W W W ):

Isolate the Block : ∑ F x = 0 , ∑ F y = 0 \sum F_x = 0, \quad \sum F_y = 0 ∑ F x ​ = 0 , ∑ F y ​ = 0 Total reaction R 2 R_2 R 2 ​ on inclined face makes angle ( θ + ϕ 2 ) (\theta + \phi_2) ( θ + ϕ 2 ​ ) with vertical, where ϕ 2 = tan ⁡ − 1 μ 2 \phi_2 = \tan^{-1}\mu_2 ϕ 2 ​ = tan − 1 μ 2 ​ .

Isolate the Wedge :

Horizontal drive force required: P = R 1 sin ⁡ ϕ 1 + R 2 sin ⁡ ( θ + ϕ 2 ) P = R_1 \sin\phi_1 + R_2 \sin(\theta + \phi_2) P = R 1 ​ sin ϕ 1 ​ + R 2 ​ sin ( θ + ϕ 2 ​ ) For equal friction coefficient ϕ 1 = ϕ 2 = ϕ 3 = ϕ \phi_1 = \phi_2 = \phi_3 = \phi ϕ 1 ​ = ϕ 2 ​ = ϕ 3 ​ = ϕ at all surfaces: P = W tan ⁡ ( θ + 2 ϕ ) P = W \tan(\theta + 2\phi) P = W tan ( θ + 2 ϕ )

8. Power Screws & Thread Mechanics

Power screws convert rotary motion into high-force linear translation (e.g., screw jacks, machine tool lead screws, sluice gates). Developed Screw Thread on Inclined Plane

  • ▲
  • │ /│
  • │ / │
  • Lead │ / │ Lead Angle α = tan⁻¹(L / π*dm)
  • (L) │ / │
  • │ / │
  • └─────────┴─────┴────────────────►
  • Mean Circumference (π * dm)
  • Kinematics and Geometry

Lead ( L L L ): Axial distance moved in one complete revolution. For single-start thread, L = p L = p L = p (pitch); for n n n -start thread, L = n ⋅ p L = n \cdot p L = n ⋅ p .

Mean Diameter ( d m d_m d m ​ ): d m = d − p 2 = d + d c 2 d_m = d - \frac{p}{2} = \frac{d + d_c}{2} d m ​ = d − 2 p ​ = 2 d + d c ​ ​ (where d d d is nominal diameter, d c d_c d c ​ is core diameter).

  • Lead (Helix) Angle ( α \alpha α ): tan ⁡ α = L π d m \tan\alpha = \frac{L}{\pi d_m} tan α = π d m ​ L ​
  • Torque Equations for Square Threads

Torque Required to Raise Load ( W W W ): T raise = W d m 2 tan ⁡ ( α + ϕ ) = W d m 2 l e f t [ tan ⁡ α + μ 1 − μ tan ⁡ α r i g h t ] T_{\text{raise}} = W \frac{d_m}{2} \tan(\alpha + \phi) = W \frac{d_m}{2} \\left[\frac{\tan\alpha + \mu}{1 - \mu \tan\alpha}\\right] T raise ​ = W 2 d m ​ ​ tan ( α + ϕ ) = W 2 d m ​ ​ l e f t [ 1 − μ tan α tan α + μ ​ r i g h t ]

Torque Required to Lower Load ( W W W ): T lower = W d m 2 tan ⁡ ( ϕ − α ) = W d m 2 l e f t [ μ − tan ⁡ α 1 + μ tan ⁡ α r i g h t ] T_{\text{lower}} = W \frac{d_m}{2} \tan(\phi - \alpha) = W \frac{d_m}{2} \\left[\frac{\mu - \tan\alpha}{1 + \mu \tan\alpha}\\right] T lower ​ = W 2 d m ​ ​ tan ( ϕ − α ) = W 2 d m ​ ​ l e f t [ 1 + μ tan α μ − tan α ​ r i g h t ]

Self-Locking vs. Overhauling Condition

Self-Locking Screw: When the load remains stationary and does not descend spontaneously when the driving torque is removed. Requires: ϕ ≥ α ⟺ μ ≥ tan ⁡ α \phi \ge \alpha \iff \mu \ge \tan\alpha ϕ ≥ α ⟺ μ ≥ tan α

Overhauling (Backdriving) Screw: When α > ϕ \alpha > \phi α > ϕ , T lower T_{\text{lower}} T lower ​ becomes negative, meaning the load descends spontaneously unless a restraining torque is applied.

Power Screw Efficiency ( η \eta η )

Efficiency ( η \eta η ): Ratio of ideal torque without friction ( ϕ = 0 \phi = 0 ϕ = 0 ) to actual torque with friction: η = T 0 T raise = W d m 2 tan ⁡ α W d m 2 tan ⁡ ( α + ϕ ) = tan ⁡ α tan ⁡ ( α + ϕ ) \eta = \frac{T_0}{T_{\text{raise}}} = \frac{W \frac{d_m}{2} \tan\alpha}{W \frac{d_m}{2} \tan(\alpha + \phi)} = \frac{\tan\alpha}{\tan(\alpha + \phi)} η = T raise ​ T 0 ​ ​ = W 2 d m ​ ​ tan ( α + ϕ ) W 2 d m ​ ​ tan α ​ = tan ( α + ϕ ) tan α ​

Maximum Efficiency Condition: Differentiating η \eta η with respect to α \alpha α gives the optimum helix angle: α opt = 45 ∘ − ϕ 2 \alpha_{\text{opt}} = 45^{\circ} - \frac{\phi}{2} α opt ​ = 4 5 ∘ − 2 ϕ ​ η max = 1 − sin ⁡ ϕ 1 + sin ⁡ ϕ \eta_{\text{max}} = \frac{1 - \sin\phi}{1 + \sin\phi} η max ​ = 1 + sin ϕ 1 − sin ϕ ​

Efficiency of Self-Locking Screws: Since α ≤ ϕ \alpha \le \phi α ≤ ϕ , η self-lock = tan ⁡ α tan ⁡ ( α + ϕ ) < tan ⁡ ϕ tan ⁡ ( 2 ϕ ) = tan ⁡ ϕ 2 tan ⁡ ϕ 1 − tan ⁡ 2 ϕ = 1 − tan ⁡ 2 ϕ 2 < 0.50 \eta_{\text{self-lock}} = \frac{\tan\alpha}{\tan(\alpha + \phi)} < \frac{\tan\phi}{\tan(2\phi)} = \frac{\tan\phi}{\frac{2\tan\phi}{1 - \tan^2\phi}} = \frac{1 - \tan^2\phi}{2} < 0.50 η self-lock ​ = tan ( α + ϕ ) tan α ​ < tan ( 2 ϕ ) tan ϕ ​ = 1 − t a n 2 ϕ 2 t a n ϕ ​ tan ϕ ​ = 2 1 − tan 2 ϕ ​ < 0.50 Rule: A self-locking power screw always operates at an efficiency of less than 50% .

  • 9. Step-by-Step Worked Engineering Calculations
  • Worked Example 6.2.1: Method of Sections on a Warren Truss

Problem: A symmetric plane Warren truss spans L = 12 m L = 12\text{ m} L = 12 m between a pinned support at A A A and a roller support at B B B . The bottom chord consists of three 4 m 4\text{ m} 4 m panels ( A C , C D , D B AC, CD, DB A C , C D , D B ). The top chord consists of joints E E E and F F F at height h = 3 m h = 3\text{ m} h = 3 m . A vertical downward load of 60 kN 60\text{ kN} 60 kN acts at bottom joint C C C , and 40 kN 40\text{ kN} 40 kN acts at joint D D D . Calculate the internal force in the top chord member E F EF EF and bottom chord member C D CD C D .

Step-by-step Solution:

Calculate External Support Reactions:

Span = 12 m 12\text{ m} 12 m . Coordinates from A A A : C ( 4 m ) , D ( 8 m ) , B ( 12 m ) C(4\text{ m}), D(8\text{ m}), B(12\text{ m}) C ( 4 m ) , D ( 8 m ) , B ( 12 m ) .

Σ M A = 0 ⟹ R B × 12 − ( 60 × 4 ) − ( 40 × 8 ) = 0 \Sigma M_A = 0 \implies R_B \times 12 - (60 \times 4) - (40 \times 8) = 0 Σ M A ​ = 0 ⟹ R B ​ × 12 − ( 60 × 4 ) − ( 40 × 8 ) = 0

12 R B = 240 + 320 = 560 ⟹ R B = 46.67 kN 12 R_B = 240 + 320 = 560 \implies R_B = 46.67\text{ kN} 12 R B ​ = 240 + 320 = 560 ⟹ R B ​ = 46.67 kN

R A = ( 60 + 40 ) − 46.67 = 53.33 kN R_A = (60 + 40) - 46.67 = 53.33\text{ kN} R A ​ = ( 60 + 40 ) − 46.67 = 53.33 kN

Select Cut Section: Pass a vertical section cut 1 − 1 1-1 1 − 1 through top chord E F EF EF , diagonal E D ED E D , and bottom chord C D CD C D . Isolate the left portion (Joints A , C , E A, C, E A , C , E ).

Calculate Force in Top Chord E F EF EF : Take moments about joint D ( x = 8 m , y = 0 ) D(x = 8\text{ m}, y = 0) D ( x = 8 m , y = 0 ) where unknown diagonal E D ED E D and bottom chord C D CD C D intersect: Σ M D = 0 ⟹ ( R A × 8 ) − ( 60 × 4 ) + ( F E F × h ) = 0 \Sigma M_D = 0 \implies (R_A \times 8) - (60 \times 4) + (F_{EF} \times h) = 0 Σ M D ​ = 0 ⟹ ( R A ​ × 8 ) − ( 60 × 4 ) + ( F EF ​ × h ) = 0 ( 53.33 × 8 ) − 240 + ( F E F × 3 ) = 0 (53.33 \times 8) - 240 + (F_{EF} \times 3) = 0 ( 53.33 × 8 ) − 240 + ( F EF ​ × 3 ) = 0 426.64 − 240 + 3 F E F = 0 ⟹ 186.64 + 3 F E F = 0 426.64 - 240 + 3 F_{EF} = 0 \implies 186.64 + 3 F_{EF} = 0 426.64 − 240 + 3 F EF ​ = 0 ⟹ 186.64 + 3 F EF ​ = 0 F E F = − 62.21 kN ⟹ 62.21 kN (Compression) F_{EF} = -62.21\text{ kN} \implies 62.21\text{ kN} \text{ (Compression)} F EF ​ = − 62.21 kN ⟹ 62.21 kN (Compression)

Calculate Force in Bottom Chord C D CD C D : Top chord joint E E E is located at x = 2 m , y = 3 m x = 2\text{ m}, y = 3\text{ m} x = 2 m , y = 3 m . Take moments about joint E E E : Σ M E = 0 ⟹ ( R A × 2 ) − ( F C D × 3 ) = 0 \Sigma M_E = 0 \implies (R_A \times 2) - (F_{CD} \times 3) = 0 Σ M E ​ = 0 ⟹ ( R A ​ × 2 ) − ( F C D ​ × 3 ) = 0 ( 53.33 × 2 ) − 3 F C D = 0 ⟹ 106.66 = 3 F C D (53.33 \times 2) - 3 F_{CD} = 0 \implies 106.66 = 3 F_{CD} ( 53.33 × 2 ) − 3 F C D ​ = 0 ⟹ 106.66 = 3 F C D ​ F C D = + 35.55 kN ⟹ 35.55 kN (Tension) F_{CD} = +35.55\text{ kN} \implies 35.55\text{ kN} \text{ (Tension)} F C D ​ = + 35.55 kN ⟹ 35.55 kN (Tension)

Worked Example 6.2.2: Power Screw Torque and Efficiency

Problem: A single-start square-threaded screw jack has a nominal diameter d = 50 mm d = 50\text{ mm} d = 50 mm , pitch p = 10 mm p = 10\text{ mm} p = 10 mm , and coefficient of thread friction μ = 0.15 \mu = 0.15 μ = 0.15 . Determine (a) the lead angle α \alpha α , (b) whether the screw is self-locking, (c) the torque required to raise a load of W = 25 kN W = 25\text{ kN} W = 25 kN , and (d) the screw efficiency.

Step-by-step Solution:

Mean Diameter and Lead Angle:

Mean diameter d m = d − p 2 = 50 − 5 = 45 mm = 0.045 m d_m = d - \frac{p}{2} = 50 - 5 = 45\text{ mm} = 0.045\text{ m} d m ​ = d − 2 p ​ = 50 − 5 = 45 mm = 0.045 m .

Lead L = 10 mm L = 10\text{ mm} L = 10 mm .

tan ⁡ α = L π d m = 10 π × 45 = 10 141.37 ≈ 0.07073 ⟹ α = tan ⁡ − 1 ( 0.07073 ) ≈ 4.05 ∘ \tan\alpha = \frac{L}{\pi d_m} = \frac{10}{\pi \times 45} = \frac{10}{141.37} \approx 0.07073 \implies \alpha = \tan^{-1}(0.07073) \approx 4.05^{\circ} tan α = π d m ​ L ​ = π × 45 10 ​ = 141.37 10 ​ ≈ 0.07073 ⟹ α = tan − 1 ( 0.07073 ) ≈ 4.0 5 ∘ .

Friction Angle and Self-Locking Verification:

Friction angle ϕ = tan ⁡ − 1 ( μ ) = tan ⁡ − 1 ( 0.15 ) ≈ 8.53 ∘ \phi = \tan^{-1}(\mu) = \tan^{-1}(0.15) \approx 8.53^{\circ} ϕ = tan − 1 ( μ ) = tan − 1 ( 0.15 ) ≈ 8.5 3 ∘ .

Since ϕ = 8.53 ∘ > α = 4.05 ∘ \phi = 8.53^{\circ} > \alpha = 4.05^{\circ} ϕ = 8.5 3 ∘ > α = 4.0 5 ∘ (i.e., μ > tan ⁡ α \mu > \tan\alpha μ > tan α ), the screw is strictly self-locking .

Torque Required to Raise W = 25 kN W = 25\text{ kN} W = 25 kN : tan ⁡ ( α + ϕ ) = tan ⁡ α + tan ⁡ ϕ 1 − tan ⁡ α tan ⁡ ϕ = 0.07073 + 0.15 1 − ( 0.07073 × 0.15 ) = 0.22073 0.98939 ≈ 0.2231 \tan(\alpha + \phi) = \frac{\tan\alpha + \tan\phi}{1 - \tan\alpha \tan\phi} = \frac{0.07073 + 0.15}{1 - (0.07073 \times 0.15)} = \frac{0.22073}{0.98939} \approx 0.2231 tan ( α + ϕ ) = 1 − tan α tan ϕ tan α + tan ϕ ​ = 1 − ( 0.07073 × 0.15 ) 0.07073 + 0.15 ​ = 0.98939 0.22073 ​ ≈ 0.2231 T raise = W d m 2 tan ⁡ ( α + ϕ ) = ( 25000 ) × l e f t ( 0.045 2 r i g h t ) × 0.2231 = 25000 × 0.0225 × 0.2231 = 125.50 N ⋅ m T_{\text{raise}} = W \frac{d_m}{2} \tan(\alpha + \phi) = (25000) \times \\left(\frac{0.045}{2}\\right) \times 0.2231 = 25000 \times 0.0225 \times 0.2231 = 125.50\text{ N}\cdot\text{m} T raise ​ = W 2 d m ​ ​ tan ( α + ϕ ) = ( 25000 ) × l e f t ( 2 0.045 ​ r i g h t ) × 0.2231 = 25000 × 0.0225 × 0.2231 = 125.50 N ⋅ m

Screw Efficiency: η = tan ⁡ α tan ⁡ ( α + ϕ ) = 0.07073 0.2231 ≈ 0.3170 \eta = \frac{\tan\alpha}{\tan(\alpha + \phi)} = \frac{0.07073}{0.2231} \approx 0.3170 η = tan ( α + ϕ ) tan α ​ = 0.2231 0.07073 ​ ≈ 0.3170

(Consistent with the fundamental rule that η < 50 % \eta < 50\% η < 50% for self-locking screws, giving an efficiency of 31.70%).