Study guide
11.6 Control-Volume Analysis: Continuity, Momentum & Energy
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
11.6 Control-Volume Analysis: Continuity, Momentum & Energy
Key Takeaways Explain This Topic AI
Control-volume analysis of mass, momentum and energy is named explicitly in the Fluid Mechanics bullet of the CIL Mechanical Paper-II syllabus.
The Reynolds transport theorem converts a system law, which follows a fixed mass, into a control-volume statement combining storage inside plus net flux across the boundary.
The momentum equation is a vector relation, so each component must be written separately with a consistent sign convention.
For steady incompressible flow the continuity equation reduces to the statement that volume flow rate is constant, so area times velocity is the same at every section.
Last updated: August 2026
System Versus Control Volume
A system is a fixed quantity of matter. Newton's laws and thermodynamic laws are naturally stated for systems, because they track the same particles.
A control volume is a fixed region in space through which fluid flows. This is what an engineer actually wants, because nobody follows individual fluid particles through a pump; they want to know what enters and leaves the casing.
The Reynolds transport theorem bridges the two. For any extensive property B B B with intensive counterpart b b b per unit mass: d B sys d t = ∂ ∂ t ∫ C V b ρ d ∀ ⏟ rate of storage inside + ∫ C S b ρ ( V ⋅ n ) d A ⏟ net flux out across the surface \frac{dB_{\text{sys}}}{dt} = \underbrace{\frac{\partial}{\partial t}\int_{CV} b\rho\,d\forall}_{\text{rate of storage inside}} + \underbrace{\int_{CS} b\rho\,(\mathbf{V}\cdot \mathbf{n})\,dA}_{\text{net flux out across the surface}} d t d B sys = rate of storage inside ∂ t ∂ ∫ C V b ρ d ∀ + net flux out across the surface ∫ CS b ρ ( V ⋅ n ) d A
Substituting b = 1 b = 1 b = 1 , b = V b = \mathbf{V} b = V and b = e b = e b = e produces the continuity, momentum and energy equations respectively. Everything in this section follows from that one statement.
Continuity: Conservation of Mass
Setting B = m B = m B = m and b = 1 b = 1 b = 1 , with d m sys / d t = 0 dm_{\text{sys}}/dt = 0 d m sys / d t = 0 : ∂ ∂ t ∫ C V ρ d ∀ + ∫ C S ρ ( V ⋅ n ) d A = 0 \frac{\partial}{\partial t}\int_{CV}\rho\,d\forall + \int_{CS}\rho(\mathbf{V}\cdot\mathbf{n})\,dA = 0 ∂ t ∂ ∫ C V ρ d ∀ + ∫ CS ρ ( V ⋅ n ) d A = 0
For steady flow the storage term vanishes, leaving ∑ m ˙ out = ∑ m ˙ in , m ˙ = ρ A V \sum \dot{m}_{\text{out}} = \sum \dot{m}_{\text{in}}, \qquad \dot m = \rho A V ∑ m ˙ out = ∑ m ˙ in , m ˙ = ρ A V
For steady incompressible flow the density cancels: A 1 V 1 = A 2 V 2 = Q A_1V_1 = A_2V_2 = Q A 1 V 1 = A 2 V 2 = Q
This is why a nozzle accelerates flow: halving the area doubles the velocity.
Differential form
Applying the same argument to an infinitesimal element gives the differential continuity equation: ∂ ρ ∂ t + ∂ ( ρ u ) ∂ x + ∂ ( ρ v ) ∂ y + ∂ ( ρ w ) ∂ z = 0 \frac{\partial \rho}{\partial t} + \frac{\partial(\rho u)}{\partial x} + \frac{\partial(\rho v)}{\partial y} + \frac{\partial(\rho w)}{\partial z} = 0 ∂ t ∂ ρ + ∂ x ∂ ( ρ u ) + ∂ y ∂ ( ρ v ) + ∂ z ∂ ( ρw ) = 0
which for incompressible flow reduces to the divergence-free condition ∂ u ∂ x + ∂ v ∂ y + ∂ w ∂ z = 0 \frac{\partial u}{\partial x} + \frac{\partial v}{\partial y} + \frac{\partial w}{\partial z} = 0 ∂ x ∂ u + ∂ y ∂ v + ∂ z ∂ w = 0
A velocity field is a possible incompressible flow only if it satisfies this — a standard objective item where a field is given and the candidate must test it.
Linear Momentum
Setting b = V b = \mathbf{V} b = V and using Newton's second law for the system: ∑ F = ∂ ∂ t ∫ C V ρ V d ∀ + ∫ C S V ρ ( V ⋅ n ) d A \sum \mathbf{F} = \frac{\partial}{\partial t}\int_{CV}\rho\mathbf{V}\,d\forall + \int_{CS}\mathbf{V}\rho(\mathbf{V}\cdot\mathbf{n})\,dA ∑ F = ∂ t ∂ ∫ C V ρ V d ∀ + ∫ CS V ρ ( V ⋅ n ) d A
For steady flow with one inlet and one outlet: ∑ F = m ˙ ( V out − V in ) \boxed{\sum \mathbf{F} = \dot{m}\left(\mathbf{V}_{\text{out}} - \mathbf{V}_{\text{in}}\right)} ∑ F = m ˙ ( V out − V in )
The forces on the left include pressure forces on the inlet and outlet faces, body forces such as weight, and the reaction from the solid boundary , which is usually what is being sought.
Working procedure
Draw the control volume, cutting through the inlet and outlet.
Mark all forces acting on the fluid inside it.
Choose axes and a sign convention, and stay with it .
Write the momentum equation separately for each component .
The force on the solid boundary is equal and opposite to the force on the fluid.
Step 4 is where most errors occur — momentum is a vector, and treating it as a scalar loses the direction information that is usually the point of the question.
Application 1: Force on a Pipe Bend
A horizontal pipe bend turns flow through angle θ \theta θ . Taking the inlet along x x x and applying the momentum equation to each component: F x = p 1 A 1 − p 2 A 2 cos θ − m ˙ ( V 2 cos θ − V 1 ) F_x = p_1A_1 - p_2A_2\cos\theta - \dot m\left(V_2\cos\theta - V_1\right) F x = p 1 A 1 − p 2 A 2 cos θ − m ˙ ( V 2 cos θ − V 1 ) F y = − p 2 A 2 sin θ − m ˙ V 2 sin θ F_y = -p_2A_2\sin\theta - \dot m\,V_2\sin\theta F y = − p 2 A 2 sin θ − m ˙ V 2 sin θ
The resultant force on the bend is F x 2 + F y 2 \sqrt{F_x^2 + F_y^2} F x 2 + F y 2 , acting opposite to the force on the fluid.
Worked example. Water at 300 kPa gauge flows at 0.1 m 3 ^3 3 /s through a 90-degree bend of constant 100 mm diameter.
Area = π ( 0.05 ) 2 = 7.854 × 10 − 3 = \pi(0.05)^2 = 7.854\times10^{-3} = π ( 0.05 ) 2 = 7.854 × 1 0 − 3 m 2 ^2 2 , so V = 0.1 / 7.854 × 10 − 3 = 12.73 V = 0.1/7.854\times10^{-3} = 12.73 V = 0.1/7.854 × 1 0 − 3 = 12.73 m/s and m ˙ = 100 \dot m = 100 m ˙ = 100 kg/s.
With θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ , taking pressure as unchanged for a constant-area bend: F x = p A + m ˙ V 1 = 300000 ( 7.854 × 10 − 3 ) + 100 ( 12.73 ) = 2356 + 1273 = 3629 N F_x = pA + \dot m V_1 = 300000(7.854\times10^{-3}) + 100(12.73) = 2356 + 1273 = 3629 \text{ N} F x = p A + m ˙ V 1 = 300000 ( 7.854 × 1 0 − 3 ) + 100 ( 12.73 ) = 2356 + 1273 = 3629 N F y = − [ p A + m ˙ V 2 ] = − 3629 N F_y = -\left[pA + \dot m V_2\right] = -3629 \text{ N} F y = − [ p A + m ˙ V 2 ] = − 3629 N
Resultant = 3629 2 = 5132 = 3629\sqrt2 = 5132 = 3629 2 = 5132 N at 45 degrees to the inlet. This is why large pipe bends need thrust blocks — and note that the pressure term dominates the momentum term here, a point often overlooked.
Application 2: Jet on a Vane
- Vane Force in the direction of the jet
- Flat plate, stationary, normal to jet F = ρ A V 2 F = \rho A V^2 F = ρ A V 2
- Flat plate moving at u u u F = ρ A ( V − u ) 2 F = \rho A (V-u)^2 F = ρ A ( V − u ) 2
Curved vane, stationary, deflecting by θ \theta θ F = ρ A V 2 ( 1 − cos θ ) F = \rho A V^2(1 - \cos\theta) F = ρ A V 2 ( 1 − cos θ )
Hemispherical cup, stationary ( θ = 180 ∘ \theta = 180^\circ θ = 18 0 ∘ ) F = 2 ρ A V 2 F = 2\rho A V^2 F = 2 ρ A V 2
Series of moving vanes (turbine) F = ρ A V ( V − u ) ( 1 − cos θ ) F = \rho A V(V-u)(1-\cos\theta) F = ρ A V ( V − u ) ( 1 − cos θ )
The hemispherical result — that reversing a jet gives twice the force of stopping it — is the physical basis of the Pelton wheel bucket shape, and the reason buckets are split with a central ridge and turned through slightly less than 180 degrees so the deflected water clears the following bucket.
For a single moving flat plate, the power is F u = ρ A ( V − u ) 2 u F u = \rho A(V-u)^2u F u = ρ A ( V − u ) 2 u , maximised when u = V / 3 u = V/3 u = V /3 . For a series of vanes on a wheel, maximum efficiency occurs at u = V / 2 u = V/2 u = V /2 — the standard result for impulse turbines.
Angular Momentum: Euler's Turbomachine Equation
Applying the moment-of-momentum form of the transport theorem to a rotor gives T = m ˙ ( r 2 V w 2 − r 1 V w 1 ) T = \dot m\left(r_2 V_{w2} - r_1 V_{w1}\right) T = m ˙ ( r 2 V w 2 − r 1 V w 1 )
and multiplying by angular velocity ω \omega ω gives the power, or per unit weight of fluid the Euler head : H e = u 2 V w 2 − u 1 V w 1 g H_e = \frac{u_2V_{w2} - u_1V_{w1}}{g} H e = g u 2 V w 2 − u 1 V w 1
Every pump, fan, compressor and turbine analysis in the turbomachinery topic descends from this one control-volume result.
Energy Equation
Setting b = e b = e b = e , the energy per unit mass, and applying the first law of thermodynamics to the control volume gives the steady flow energy equation : Q ˙ − W ˙ s = m ˙ [ ( h 2 − h 1 ) + V 2 2 − V 1 2 2 + g ( z 2 − z 1 ) ] \dot Q - \dot W_s = \dot m\left[\left(h_2 - h_1\right) + \frac{V_2^2 - V_1^2}{2} + g(z_2 - z_1)\right] Q ˙ − W ˙ s = m ˙ [ ( h 2 − h 1 ) + 2 V 2 2 − V 1 2 + g ( z 2 − z 1 ) ]
For an incompressible fluid with no shaft work, no heat transfer and no friction, this collapses to Bernoulli's equation : p 1 ρ g + V 1 2 2 g + z 1 = p 2 ρ g + V 2 2 2 g + z 2 \frac{p_1}{\rho g} + \frac{V_1^2}{2g} + z_1 = \frac{p_2}{\rho g} + \frac{V_2^2}{2g} + z_2 ρ g p 1 + 2 g V 1 2 + z 1 = ρ g p 2 + 2 g V 2 2 + z 2
With losses and machines included, the practical working form is p 1 ρ g + V 1 2 2 g + z 1 + h pump = p 2 ρ g + V 2 2 2 g + z 2 + h turbine + h L \frac{p_1}{\rho g} + \frac{V_1^2}{2g} + z_1 + h_{\text{pump}} = \frac{p_2}{\rho g} + \frac{V_2^2}{2g} + z_2 + h_{\text{turbine}} + h_{L} ρ g p 1 + 2 g V 1 2 + z 1 + h pump = ρ g p 2 + 2 g V 2 2 + z 2 + h turbine + h L
Which Equation to Use
This choice is the practical skill the topic teaches.
- To find Use
- Velocity from area change Continuity
- Force on a bend, vane, nozzle or gate Momentum
- Pressure or head from velocity and elevation Energy / Bernoulli
- Torque or power of a rotor Angular momentum
A critical distinction: the momentum equation does not require the flow to be frictionless , because internal losses are internal forces that cancel. Bernoulli's equation does. So for a sudden expansion, where losses are significant, momentum gives the correct force while Bernoulli would not — and indeed applying momentum and energy together to a sudden expansion is precisely how the Borda-Carnot head loss $ (V_1-V_2)^2/2g$ is derived.