Study guide
11.5 Dimensional Analysis, Similitude & Model Testing
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
11.5 Dimensional Analysis, Similitude & Model Testing
Key Takeaways Explain This Topic AI
Dimensional analysis is named explicitly in the Fluid Mechanics bullet of the CIL Mechanical Paper-II syllabus.
Buckingham's Pi theorem states that a relation among n variables involving m fundamental dimensions reduces to a relation among n minus m dimensionless groups.
Reynolds number governs viscous-dominated flows such as pipe flow, while Froude number governs free-surface flows and Mach number governs compressible flows.
Complete dynamic similarity requires geometric and kinematic similarity plus equality of the governing dimensionless number between model and prototype.
Last updated: August 2026
Why Dimensionless Groups Exist
The drag on a submerged body depends on its size, the fluid density and viscosity, and the velocity — five variables. Investigating that experimentally by varying each in turn would need an impractical number of tests. Dimensional analysis reduces the five variables to two dimensionless groups, so a single curve captures the entire relationship.
This is not merely a labour-saving device. It is also the reason a model tested in a laboratory can predict the behaviour of a full-size machine, and the reason correlations such as the Nusselt-Reynolds-Prandtl relations of heat transfer take the form they do.
Fundamental Dimensions
In the MLT system, every mechanical quantity reduces to mass M M M , length L L L and time T T T .
- Quantity Dimensions
- Velocity L T − 1 LT^{-1} L T − 1
- Acceleration L T − 2 LT^{-2} L T − 2
- Force M L T − 2 MLT^{-2} M L T − 2
- Pressure, stress M L − 1 T − 2 ML^{-1}T^{-2} M L − 1 T − 2
- Density M L − 3 ML^{-3} M L − 3
- Dynamic viscosity μ \mu μ M L − 1 T − 1 ML^{-1}T^{-1} M L − 1 T − 1
- Kinematic viscosity ν \nu ν L 2 T − 1 L^{2}T^{-1} L 2 T − 1
- Surface tension M T − 2 MT^{-2} M T − 2
- Work, energy M L 2 T − 2 ML^{2}T^{-2} M L 2 T − 2
- Power M L 2 T − 3 ML^{2}T^{-3} M L 2 T − 3
- Momentum, impulse M L T − 1 MLT^{-1} M L T − 1
- Torque M L 2 T − 2 ML^{2}T^{-2} M L 2 T − 2
Note that torque and energy share dimensions but are physically distinct — dimensional identity does not imply physical equivalence.
Buckingham's Pi Theorem
If a physical problem involves n n n variables and these contain m m m fundamental dimensions, the relationship can be expressed in terms of ( n − m ) (n - m) ( n − m ) independent dimensionless Π \Pi Π groups.
Procedure
List all n n n variables and write their dimensions.
Determine m m m , the number of fundamental dimensions present.
Choose m m m repeating variables . They must together contain all m m m dimensions, must not themselves form a dimensionless group, and conventionally include one geometric variable (a length), one kinematic (a velocity) and one dynamic (density). The dependent variable must never be a repeating variable.
Form ( n − m ) (n-m) ( n − m ) groups, each consisting of the repeating variables raised to unknown powers multiplied by one non-repeating variable.
Solve for the exponents by requiring each group to be dimensionless.
Worked example: drag force
Drag F F F depends on velocity v v v , length l l l , density ρ \rho ρ and viscosity μ \mu μ . Here n = 5 n = 5 n = 5 and m = 3 m = 3 m = 3 , so there are 5 − 3 = 2 5 - 3 = 2 5 − 3 = 2 groups.
Take l l l , v v v and ρ \rho ρ as repeating variables. The two groups turn out to be Π 1 = F ρ v 2 l 2 , Π 2 = μ ρ v l = 1 R e \Pi_1 = \frac{F}{\rho v^2 l^2}, \qquad \Pi_2 = \frac{\mu}{\rho v l} = \frac{1}{Re} Π 1 = ρ v 2 l 2 F , Π 2 = ρ v l μ = R e 1
So the general result is F ρ v 2 l 2 = ϕ ( R e ) \frac{F}{\rho v^2 l^2} = \phi\!\left(Re\right) ρ v 2 l 2 F = ϕ ( R e )
which, written with the conventional factor of one half and area A A A , is exactly the familiar drag equation F = C D 1 2 ρ v 2 A , C D = f ( R e ) F = C_D\,\tfrac{1}{2}\rho v^2 A, \qquad C_D = f(Re) F = C D 2 1 ρ v 2 A , C D = f ( R e )
Dimensional analysis has produced the form of the law without any experiment; experiment is needed only to find the function f f f .
The Principal Dimensionless Numbers
Each number is a ratio of inertia force to some other force , and each governs a different class of flow.
Number Definition Ratio of Governs
Reynolds R e Re R e ρ v L μ = v L ν \dfrac{\rho v L}{\mu} = \dfrac{vL}{\nu} μ ρ vL = ν vL Inertia to viscous Pipe flow, submerged bodies, boundary layers
Froude F r Fr F r v g L \dfrac{v}{\sqrt{gL}} gL v Inertia to gravity Free-surface flow: channels, spillways, ships
Euler E u Eu E u v p / ρ \dfrac{v}{\sqrt{p/\rho}} p / ρ v Inertia to pressure Pressure-driven flow, cavitation
Weber W e We W e ρ v 2 L σ \dfrac{\rho v^2 L}{\sigma} σ ρ v 2 L Inertia to surface tension Droplets, sprays, capillary waves, thin films
Mach M a Ma M a v c \dfrac{v}{c} c v Inertia to elastic Compressible flow; M a > 0.3 Ma > 0.3 M a > 0.3
In heat transfer the same logic gives Nusselt , Prandtl , Grashof and Stanton numbers, which is why the two subjects share a methodology.
Critical values worth recalling
- Number Threshold Meaning
- R e Re R e in a pipe 2000 / 4000 Laminar below 2000; turbulent above 4000
- R e Re R e on a flat plate 5 × 10 5 5\times10^5 5 × 1 0 5 Transition to turbulent boundary layer
- F r Fr F r 1 Critical flow; below is subcritical, above is supercritical
- M a Ma M a 1 Sonic; below is subsonic, above supersonic
- M a Ma M a 0.3 Below this, flow may be treated as incompressible
- Similitude
For a model test to predict prototype behaviour, three conditions must hold in sequence.
1. Geometric similarity. The model is a true scale replica: every length ratio is the same, L r = L m / L p L_r = L_m/L_p L r = L m / L p . This includes surface roughness, which is often the hardest part to satisfy.
2. Kinematic similarity. Velocity and acceleration at corresponding points have the same ratio and the same direction. Streamline patterns are geometrically similar.
3. Dynamic similarity. Force ratios at corresponding points are equal. In practice this means making the governing dimensionless number equal in model and prototype.
All three are required; geometric similarity alone is not enough, and this hierarchy is a standard objective item.
Which number to match
- Flow situation Match
- Fully submerged body, closed pipe Reynolds
- Free surface present: ships, spillways, open channels Froude
- Compressible, high speed Mach
- Droplet formation, thin sheets Weber
It is generally impossible to satisfy Reynolds and Froude simultaneously with the same fluid. Froude similarity requires v r = L r v_r = \sqrt{L_r} v r = L r , while Reynolds similarity requires v r = 1 / L r v_r = 1/L_r v r = 1/ L r . For a 1:25 ship model, Froude gives v r = 0.2 v_r = 0.2 v r = 0.2 but Reynolds would demand v r = 25 v_r = 25 v r = 25 . Naval architects resolve this by scaling on Froude for wave-making resistance and correcting the viscous friction component analytically — a genuine limitation of model testing rather than a mathematical curiosity.
Scale ratios under Froude similarity
With L r L_r L r the length scale, matching Froude numbers gives:
- Quantity Ratio
- Velocity L r 1 / 2 L_r^{1/2} L r 1/2
- Time L r 1 / 2 L_r^{1/2} L r 1/2
- Acceleration 1
- Discharge L r 5 / 2 L_r^{5/2} L r 5/2
- Force L r 3 L_r^{3} L r 3
- Power L r 7 / 2 L_r^{7/2} L r 7/2
- Worked example
A spillway model is built to a scale of 1:36. If the model discharge is 0.5 m 3 ^3 3 /s, find the prototype discharge.
A spillway has a free surface, so Froude similarity applies and Q r = L r 5 / 2 Q_r = L_r^{5/2} Q r = L r 5/2 . With L p / L m = 36 L_p/L_m = 36 L p / L m = 36 : Q p = Q m × 36 5 / 2 = 0.5 × 7776 = 3888 m 3 / s Q_p = Q_m \times 36^{5/2} = 0.5 \times 7776 = 3888 \text{ m}^3/\text{s} Q p = Q m × 3 6 5/2 = 0.5 × 7776 = 3888 m 3 / s
Worked example: pipe flow
A 1:5 scale model of a mine ventilation duct is tested with the same air. Reynolds similarity requires ρ v L / μ \rho v L/\mu ρ vL / μ to match, so with the same fluid v m L m = v p L p ⇒ v m = 5 v p v_m L_m = v_p L_p \;\Rightarrow\; v_m = 5\,v_p v m L m = v p L p ⇒ v m = 5 v p
The model must be run at five times the prototype velocity — often impractical, which is why such models are frequently tested in water or in pressurised air to raise the density and bring the required velocity down.