Study guide

11.2 Fluid Kinematics, Continuity & Bernoulli's Equation

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

11.2 Fluid Kinematics, Continuity & Bernoulli's Equation

Key Takeaways Explain This Topic AI

The Eulerian approach describes fluid flow as a spatial velocity field V ⃗ ( x , y , z , t ) \vec{V}(x,y,z,t) V ( x , y , z , t ) , where total acceleration consists of local/unsteady acceleration ( ∂ V ⃗ / ∂ t \partial\vec{V}/\partial t ∂ V / ∂ t ) and spatial/convective acceleration ( ( V ⃗ ⋅ ∇ ) V ⃗ (\vec{V}\cdot\nabla)\vec{V} ( V ⋅ ∇ ) V ).

Velocity potential ϕ \phi ϕ exists strictly for irrotational flows ( ∇ × V ⃗ = 0 \nabla \times \vec{V} = 0 ∇ × V = 0 ), while stream function ψ \psi ψ satisfies continuity for 2D incompressible flows; their level curves intersect orthogonally forming a Flow Net.

The 3D continuity equation expresses the conservation of mass, simplifying to the divergence-free condition ∇ ⋅ V ⃗ = 0 \nabla \cdot \vec{V} = 0 ∇ ⋅ V = 0 for steady incompressible flow.

Bernoulli's equation represents mechanical energy conservation along a streamline under four strict assumptions: steady, incompressible, frictionless/inviscid, and along a streamline ( P ρ g + V 2 2 g + z = constant \frac{P}{\rho g} + \frac{V^2}{2g} + z = \text{constant} ρ g P ​ + 2 g V 2 ​ + z = constant ).

Differential pressure flowmeters utilize Bernoulli's theorem: Venturimeter ( C d ≈ 0.95 − 0.98 C_d \approx 0.95-0.98 C d ​ ≈ 0.95 − 0.98 with low head loss), Orifice meter ( C d ≈ 0.60 − 0.65 C_d \approx 0.60-0.65 C d ​ ≈ 0.60 − 0.65 ), and Pitot tube ( V = C v 2 g Δ h V = C_v \sqrt{2g\Delta h} V = C v ​ 2 g Δ h ​ ).)

Last updated: August 2026

Fluid Kinematics, Continuity & Bernoulli's Equation

Fluid kinematics describes fluid motion in space and time without consideration of the forces causing the motion. In mining and process engineering—such as calculating flow rates in coal washing circuits, slurry distribution networks, and mine ventilation airways—kinematics and energy conservation equations form the theoretical core of fluid dynamic calculations.

1. Lagrangian vs. Eulerian Descriptions

Fluid motion can be tracked via two distinct classical mechanics frameworks: 1. Lagrangian Framework: 2. Eulerian Framework:

Track specific fluid particle Fix observation point (x, y, z);

P(t) over its trajectory: measure velocity field V(x, y, z, t):

  • P(t_1) -> P(t_2) -> P(t_3) (x, y, z)
  • *--------->*--------->* [ + ] ---> V(x, y, z, t)

Lagrangian Description: Focuses on tracking individual, identifiable fluid particles as they move through space and time. Position vector r ⃗ = r ⃗ ( x 0 , y 0 , z 0 , t ) \vec{r} = \vec{r}(x_0, y_0, z_0, t) r = r ( x 0 ​ , y 0 ​ , z 0 ​ , t ) and velocity V ⃗ = d r ⃗ d t \vec{V} = \frac{d\vec{r}}{dt} V = d t d r ​ . (Commonly used in solid mechanics and discrete multiphase slurry particle tracking).

Eulerian Description: Focuses on fixed spatial control points ( x , y , z ) (x,y,z) ( x , y , z ) in the flow field, measuring fluid properties (velocity V ⃗ \vec{V} V , pressure P P P , density ρ \rho ρ ) passing through those fixed points as a function of time: V ⃗ = u i ^ + v j ^ + w k ^ = f ( x , y , z , t ) \vec{V} = u\hat{i} + v\hat{j} + w\hat{k} = f(x,y,z,t) V = u i ^ + v j ^ ​ + w k ^ = f ( x , y , z , t ) . (Standard approach in fluid mechanics and turbomachinery).

1.1 The Substantial (Material) Derivative and Acceleration

The total acceleration of a fluid particle in an Eulerian field is given by the Substantial / Material Derivative D V ⃗ D t \frac{D\vec{V}}{Dt} D t D V ​ :

a ⃗ = D V ⃗ D t = ∂ V ⃗ ∂ t ⏟ Local / Temporal Acceleration + ( u ∂ V ⃗ ∂ x + v ∂ V ⃗ ∂ y + w ∂ V ⃗ ∂ z ) ⏟ Convective / Spatial Acceleration = ∂ V ⃗ ∂ t + ( V ⃗ ⋅ ∇ ) V ⃗ \vec{a} = \frac{D\vec{V}}{Dt} = \underbrace{\frac{\partial\vec{V}}{\partial t}}_{\text{Local / Temporal Acceleration}} + \underbrace{\left(u\frac{\partial\vec{V}}{\partial x} + v\frac{\partial\vec{V}}{\partial y} + w\frac{\partial\vec{V}}{\partial z}\right)}_{\text{Convective / Spatial Acceleration}} = \frac{\partial\vec{V}}{\partial t} + (\vec{V} \cdot \nabla)\vec{V} a = D t D V ​ = Local / Temporal Acceleration ∂ t ∂ V ​ ​ ​ + Convective / Spatial Acceleration ( u ∂ x ∂ V ​ + v ∂ y ∂ V ​ + w ∂ z ∂ V ​ ) ​ ​ = ∂ t ∂ V ​ + ( V ⋅ ∇ ) V

Scalar Acceleration Components in Cartesian Coordinates:

a x = ∂ u ∂ t + u ∂ u ∂ x + v ∂ u ∂ y + w ∂ u ∂ z a_x = \frac{\partial u}{\partial t} + u\frac{\partial u}{\partial x} + v\frac{\partial u}{\partial y} + w\frac{\partial u}{\partial z} a x ​ = ∂ t ∂ u ​ + u ∂ x ∂ u ​ + v ∂ y ∂ u ​ + w ∂ z ∂ u ​ a y = ∂ v ∂ t + u ∂ v ∂ x + v ∂ v ∂ y + w ∂ v ∂ z a_y = \frac{\partial v}{\partial t} + u\frac{\partial v}{\partial x} + v\frac{\partial v}{\partial y} + w\frac{\partial v}{\partial z} a y ​ = ∂ t ∂ v ​ + u ∂ x ∂ v ​ + v ∂ y ∂ v ​ + w ∂ z ∂ v ​ a z = ∂ w ∂ t + u ∂ w ∂ x + v ∂ w ∂ y + w ∂ w ∂ z a_z = \frac{\partial w}{\partial t} + u\frac{\partial w}{\partial x} + v\frac{\partial w}{\partial y} + w\frac{\partial w}{\partial z} a z ​ = ∂ t ∂ w ​ + u ∂ x ∂ w ​ + v ∂ y ∂ w ​ + w ∂ z ∂ w ​

Summary of Acceleration Combinations:

Steady Uniform Flow: Local Accel = 0 0 0 , Convective Accel = 0 0 0 ⟹ a ⃗ = 0 \implies \vec{a} = 0 ⟹ a = 0 (e.g., constant discharge through constant diameter pipe).

Steady Non-Uniform Flow: Local Accel = 0 0 0 , Convective Accel ≠ 0 \ne 0  = 0 ⟹ a ⃗ ≠ 0 \implies \vec{a} \ne 0 ⟹ a  = 0 (e.g., constant discharge through a tapering pipe or nozzle).

Unsteady Uniform Flow: Local Accel ≠ 0 \ne 0  = 0 , Convective Accel = 0 0 0 ⟹ a ⃗ ≠ 0 \implies \vec{a} \ne 0 ⟹ a  = 0 (e.g., pulsating flow through a constant diameter pipe).

Unsteady Non-Uniform Flow: Local Accel ≠ 0 \ne 0  = 0 , Convective Accel ≠ 0 \ne 0  = 0 ⟹ a ⃗ ≠ 0 \implies \vec{a} \ne 0 ⟹ a  = 0 (e.g., changing discharge through a tapering nozzle).

2. Classification of Fluid Flows

Steady vs. Unsteady Flow:

Steady Flow: Flow properties at any point do not change with time: ∂ V ⃗ ∂ t = 0 , ∂ P ∂ t = 0 , ∂ ρ ∂ t = 0 \frac{\partial \vec{V}}{\partial t} = 0, \frac{\partial P}{\partial t} = 0, \frac{\partial \rho}{\partial t} = 0 ∂ t ∂ V ​ = 0 , ∂ t ∂ P ​ = 0 , ∂ t ∂ ρ ​ = 0 .

Unsteady Flow: Fluid properties at a point change with respect to time: ∂ V ⃗ ∂ t ≠ 0 \frac{\partial \vec{V}}{\partial t} \ne 0 ∂ t ∂ V ​  = 0 .

Uniform vs. Non-Uniform Flow:

Uniform Flow: Velocity vector does not change with spatial position along the direction of flow at any instant: ( ∂ V ⃗ ∂ s ) t = const = 0 \left(\frac{\partial \vec{V}}{\partial s}\right)_{t=\text{const}} = 0 ( ∂ s ∂ V ​ ) t = const ​ = 0 .

Non-Uniform Flow: Velocity changes along the path of flow: ( ∂ V ⃗ ∂ s ) t = const ≠ 0 \left(\frac{\partial \vec{V}}{\partial s}\right)_{t=\text{const}} \ne 0 ( ∂ s ∂ V ​ ) t = const ​  = 0 .

Laminar vs. Turbulent Flow:

Laminar Flow: Fluid particles move in smooth, parallel layers or laminas without macroscopic cross-mixing. Governed by viscous forces (low Reynolds number).

Turbulent Flow: Fluid particles move in highly erratic, chaotic trajectories with intense momentum cross-mixing and eddy formation (high Reynolds number).

Rotational vs. Irrotational Flow:

Rotational Flow: Fluid particles rotate about their own mass centers while translating (Vorticity ζ ⃗ = ∇ × V ⃗ ≠ 0 \vec{\zeta} = \nabla \times \vec{V} \ne 0 ζ ​ = ∇ × V  = 0 ).

Irrotational Flow: Fluid particles do not rotate about their own mass centers ( ∇ × V ⃗ = 0 \nabla \times \vec{V} = 0 ∇ × V = 0 ).

Compressible vs. Incompressible Flow:

Incompressible: Density is constant throughout ( ρ = constant ⟹ ∇ ⋅ V ⃗ = 0 \rho = \text{constant} \implies \nabla \cdot \vec{V} = 0 ρ = constant ⟹ ∇ ⋅ V = 0 ). (Valid for liquids and gas flows with Mach number M = V / c < 0.3 M = V/c < 0.3 M = V / c < 0.3 ).

Compressible: Density varies significantly ( M > 0.3 M > 0.3 M > 0.3 ).

  • 3. Flow Lines: Streamlines, Pathlines, Streaklines, and Streamtubes ds = dx i + dy j + dz k
  • ---->----------> Streamline
  • / V = u i + v j + w k (V is tangent to ds everywhere)
  • /
  • + (V x ds = 0)

Streamline: An imaginary continuous line drawn through a flowing fluid such that the tangent at every point gives the direction of the velocity vector at that instant. There can be no fluid flow across a streamline.

Differential Equation of a Streamline: Since V ⃗ × d s ⃗ = 0 \vec{V} \times d\vec{s} = 0 V × d s = 0 : d x u = d y v = d z w \frac{dx}{u} = \frac{dy}{v} = \frac{dz}{w} u d x ​ = v d y ​ = w d z ​

In 2D plane flow ( x y xy x y -plane): d x u = d y v ⟹ ( d y d x ) streamline = v u \frac{dx}{u} = \frac{dy}{v} \implies \left(\frac{dy}{dx}\right)_{\text{streamline}} = \frac{v}{u} u d x ​ = v d y ​ ⟹ ( d x d y ​ ) streamline ​ = u v ​

Pathline: The actual trajectory traced by an individual fluid particle over a period of time (Lagrangian concept).

Streakline: The instantaneous locus of all fluid particles that have successively passed through a fixed point in space (e.g., continuous dye injection or smoke filament).

Streamtube: A tubular surface formed by a bundle of streamlines passing through a closed curve. Since velocity is everywhere tangent to the tube boundary, no fluid can cross the walls of a streamtube .

Exam Axiom: In steady flow , streamlines, pathlines, and streaklines are completely identical and coincide . In unsteady flow, they diverge into distinct curves.

4. The 3D Continuity Equation (Conservation of Mass)

Applying mass conservation to a differential control volume d x × d y × d z dx \times dy \times dz d x × d y × d z :

[ Net Mass Inflow Rate ] = [ Rate of Mass Accumulation inside CV ] \left[\text{Net Mass Inflow Rate}\right] = \left[\text{Rate of Mass Accumulation inside CV}\right] [ Net Mass Inflow Rate ] = [ Rate of Mass Accumulation inside CV ]

4.1 General 3D Continuity Equation in Cartesian Coordinates:

∂ ρ ∂ t + ∂ ( ρ u ) ∂ x + ∂ ( ρ v ) ∂ y + ∂ ( ρ w ) ∂ z = 0 \frac{\partial \rho}{\partial t} + \frac{\partial(\rho u)}{\partial x} + \frac{\partial(\rho v)}{\partial y} + \frac{\partial(\rho w)}{\partial z} = 0 ∂ t ∂ ρ ​ + ∂ x ∂ ( ρ u ) ​ + ∂ y ∂ ( ρ v ) ​ + ∂ z ∂ ( ρw ) ​ = 0

In vector notation: ∂ ρ ∂ t + ∇ ⋅ ( ρ V ⃗ ) = 0 \frac{\partial \rho}{\partial t} + \nabla \cdot (\rho \vec{V}) = 0 ∂ t ∂ ρ ​ + ∇ ⋅ ( ρ V ) = 0

4.2 Special Cases:

Steady Compressible Flow ( ∂ ρ ∂ t = 0 \frac{\partial \rho}{\partial t} = 0 ∂ t ∂ ρ ​ = 0 ): ∂ ( ρ u ) ∂ x + ∂ ( ρ v ) ∂ y + ∂ ( ρ w ) ∂ z = 0 \frac{\partial(\rho u)}{\partial x} + \frac{\partial(\rho v)}{\partial y} + \frac{\partial(\rho w)}{\partial z} = 0 ∂ x ∂ ( ρ u ) ​ + ∂ y ∂ ( ρ v ) ​ + ∂ z ∂ ( ρw ) ​ = 0

Incompressible Flow ( ρ = constant \rho = \text{constant} ρ = constant ): ∂ u ∂ x + ∂ v ∂ y + ∂ w ∂ z = 0 ⟺ ∇ ⋅ V ⃗ = 0 \frac{\partial u}{\partial x} + \frac{\partial v}{\partial y} + \frac{\partial w}{\partial z} = 0 \iff \nabla \cdot \vec{V} = 0 ∂ x ∂ u ​ + ∂ y ∂ v ​ + ∂ z ∂ w ​ = 0 ⟺ ∇ ⋅ V = 0

1D Steady Flow along a Conduit: ρ 1 A 1 V 1 = ρ 2 A 2 V 2 = m ˙ = constant \rho_1 A_1 V_1 = \rho_2 A_2 V_2 = \dot{m} = \text{constant} ρ 1 ​ A 1 ​ V 1 ​ = ρ 2 ​ A 2 ​ V 2 ​ = m ˙ = constant For incompressible fluid ( ρ 1 = ρ 2 \rho_1 = \rho_2 ρ 1 ​ = ρ 2 ​ ): A 1 V 1 = A 2 V 2 = Q = constant A_1 V_1 = A_2 V_2 = Q = \text{constant} A 1 ​ V 1 ​ = A 2 ​ V 2 ​ = Q = constant

4.3 Cylindrical Polar Coordinates ( r , θ , z r, \theta, z r , θ , z ):

∂ ρ ∂ t + 1 r ∂ ( r ρ v r ) ∂ r + 1 r ∂ ( ρ v θ ) ∂ θ + ∂ ( ρ v z ) ∂ z = 0 \frac{\partial \rho}{\partial t} + \frac{1}{r}\frac{\partial(r \rho v_r)}{\partial r} + \frac{1}{r}\frac{\partial(\rho v_{\theta})}{\partial \theta} + \frac{\partial(\rho v_z)}{\partial z} = 0 ∂ t ∂ ρ ​ + r 1 ​ ∂ r ∂ ( r ρ v r ​ ) ​ + r 1 ​ ∂ θ ∂ ( ρ v θ ​ ) ​ + ∂ z ∂ ( ρ v z ​ ) ​ = 0 For 2D steady incompressible axisymmetric flow ( v θ = 0 , ∂ / ∂ z = 0 v_{\theta} = 0, \partial/\partial z = 0 v θ ​ = 0 , ∂ / ∂ z = 0 ): 1 r ∂ ( r v r ) ∂ r = 0 ⟹ r v r = constant \frac{1}{r}\frac{\partial(r v_r)}{\partial r} = 0 \implies r v_r = \text{constant} r 1 ​ ∂ r ∂ ( r v r ​ ) ​ = 0 ⟹ r v r ​ = constant

  • 5. Potential Flow Theory: Velocity Potential & Stream Function psi = c_2 (Streamline) psi = c_1
  • | |
  • phi = k_1 --+------------------------+----
  • | |
  • | Orthogonal (90 deg)|
  • | Intersection |
  • phi = k_2 --+------------------------+----
  • (Equipotential Lines)
  • 5.1 Velocity Potential Function ( ϕ \phi ϕ )

A scalar spatial function ϕ ( x , y , z , t ) \phi(x,y,z,t) ϕ ( x , y , z , t ) defined such that its negative spatial gradient yields the velocity components:

u = − ∂ ϕ ∂ x , v = − ∂ ϕ ∂ y , w = − ∂ ϕ ∂ z ⟺ V ⃗ = − ∇ ϕ u = -\frac{\partial \phi}{\partial x}, \quad v = -\frac{\partial \phi}{\partial y}, \quad w = -\frac{\partial \phi}{\partial z} \iff \vec{V} = -\nabla \phi u = − ∂ x ∂ ϕ ​ , v = − ∂ y ∂ ϕ ​ , w = − ∂ z ∂ ϕ ​ ⟺ V = − ∇ ϕ

(Note: Some textbooks omit the negative sign; standard PSU/GATE convention includes the negative sign indicating flow occurs in direction of decreasing potential).

Key Properties of ϕ \phi ϕ :

Existence Condition: ϕ \phi ϕ exists if and only if the flow is irrotational : ∇ × V ⃗ = − ∇ × ( ∇ ϕ ) ≡ 0 \nabla \times \vec{V} = -\nabla \times (\nabla \phi) \equiv 0 ∇ × V = − ∇ × ( ∇ ϕ ) ≡ 0 If ϕ \phi ϕ exists for a flow field, the flow is guaranteed to be irrotational.

Laplace Equation for Incompressible Flow: Substituting ϕ \phi ϕ into the continuity equation ∇ ⋅ V ⃗ = 0 \nabla \cdot \vec{V} = 0 ∇ ⋅ V = 0 yields: ∂ 2 ϕ ∂ x 2 + ∂ 2 ϕ ∂ y 2 + ∂ 2 ϕ ∂ z 2 = 0 ⟺ ∇ 2 ϕ = 0 \frac{\partial^2 \phi}{\partial x^2} + \frac{\partial^2 \phi}{\partial y^2} + \frac{\partial^2 \phi}{\partial z^2} = 0 \iff \nabla^2 \phi = 0 ∂ x 2 ∂ 2 ϕ ​ + ∂ y 2 ∂ 2 ϕ ​ + ∂ z 2 ∂ 2 ϕ ​ = 0 ⟺ ∇ 2 ϕ = 0 Any function satisfying Laplace's equation represents a possible steady, incompressible, irrotational fluid flow.

Equipotential Lines: Lines along which ϕ = constant \phi = \text{constant} ϕ = constant ( d ϕ = 0 d\phi = 0 d ϕ = 0 ): d ϕ = ∂ ϕ ∂ x d x + ∂ ϕ ∂ y d y = − u d x − v d y = 0 d\phi = \frac{\partial \phi}{\partial x}dx + \frac{\partial \phi}{\partial y}dy = -u \, dx - v \, dy = 0 d ϕ = ∂ x ∂ ϕ ​ d x + ∂ y ∂ ϕ ​ d y = − u d x − v d y = 0 ( d y d x ) ϕ = const = − u v \left(\frac{dy}{dx}\right)_{\phi = \text{const}} = -\frac{u}{v} ( d x d y ​ ) ϕ = const ​ = − v u ​

5.2 Stream Function ( ψ \psi ψ )

A scalar function ψ ( x , y , t ) \psi(x,y,t) ψ ( x , y , t ) defined for 2D incompressible flow such that it automatically satisfies the continuity equation:

u = − ∂ ψ ∂ y , v = ∂ ψ ∂ x u = -\frac{\partial \psi}{\partial y}, \quad v = \frac{\partial \psi}{\partial x} u = − ∂ y ∂ ψ ​ , v = ∂ x ∂ ψ ​

*(Or alternatively u = ∂ ψ ∂ y , v = − ∂ ψ ∂ x u = \frac{\partial \psi}{\partial y}, v = -\frac{\partial \psi}{\partial x} u = ∂ y ∂ ψ ​ , v = − ∂ x ∂ ψ ​ ). Checking continuity: ∂ u ∂ x + ∂ v ∂ y = ∂ ∂ x ( − ∂ ψ ∂ y ) + ∂ ∂ y ( ∂ ψ ∂ x ) = − ∂ 2 ψ ∂ x ∂ y + ∂ 2 ψ ∂ y ∂ x = 0 \frac{\partial u}{\partial x} + \frac{\partial v}{\partial y} = \frac{\partial}{\partial x}\left(-\frac{\partial \psi}{\partial y}\right) + \frac{\partial}{\partial y}\left(\frac{\partial \psi}{\partial x}\right) = -\frac{\partial^2 \psi}{\partial x \partial y} + \frac{\partial^2 \psi}{\partial y \partial x} = 0 ∂ x ∂ u ​ + ∂ y ∂ v ​ = ∂ x ∂ ​ ( − ∂ y ∂ ψ ​ ) + ∂ y ∂ ​ ( ∂ x ∂ ψ ​ ) = − ∂ x ∂ y ∂ 2 ψ ​ + ∂ y ∂ x ∂ 2 ψ ​ = 0 .

Key Properties of ψ \psi ψ :

Existence Condition: ψ \psi ψ exists for any 2D flow (rotational or irrotational) provided it satisfies the continuity equation.

Streamlines: Lines of constant ψ \psi ψ ( d ψ = 0 d\psi = 0 d ψ = 0 ): d ψ = ∂ ψ ∂ x d x + ∂ ψ ∂ y d y = v d x − u d y = 0 d\psi = \frac{\partial \psi}{\partial x}dx + \frac{\partial \psi}{\partial y}dy = v \, dx - u \, dy = 0 d ψ = ∂ x ∂ ψ ​ d x + ∂ y ∂ ψ ​ d y = v d x − u d y = 0 ( d y d x ) ψ = const = v u \left(\frac{dy}{dx}\right)_{\psi = \text{const}} = \frac{v}{u} ( d x d y ​ ) ψ = const ​ = u v ​

Volumetric Discharge between Streamlines: The volume flow rate per unit depth q q q between two streamlines ψ 1 \psi_1 ψ 1 ​ and ψ 2 \psi_2 ψ 2 ​ is: q = ψ 2 − ψ 1 q = \psi_2 - \psi_1 q = ψ 2 ​ − ψ 1 ​

Irrotationality Condition for ψ \psi ψ : If the flow is also irrotational ( ω z = 0 \omega_z = 0 ω z ​ = 0 ): ω z = 1 2 ( ∂ v ∂ x − ∂ u ∂ y ) = 1 2 ( ∂ 2 ψ ∂ x 2 + ∂ 2 ψ ∂ y 2 ) = 0 ⟺ ∇ 2 ψ = 0 \omega_z = \frac{1}{2}\left(\frac{\partial v}{\partial x} - \frac{\partial u}{\partial y}\right) = \frac{1}{2}\left(\frac{\partial^2 \psi}{\partial x^2} + \frac{\partial^2 \psi}{\partial y^2}\right) = 0 \iff \nabla^2 \psi = 0 ω z ​ = 2 1 ​ ( ∂ x ∂ v ​ − ∂ y ∂ u ​ ) = 2 1 ​ ( ∂ x 2 ∂ 2 ψ ​ + ∂ y 2 ∂ 2 ψ ​ ) = 0 ⟺ ∇ 2 ψ = 0

5.3 Cauchy-Riemann Equations & Orthogonality of Flow Nets

Comparing definitions of u u u and v v v :

∂ ϕ ∂ x = ∂ ψ ∂ y , ∂ ϕ ∂ y = − ∂ ψ ∂ x \frac{\partial \phi}{\partial x} = \frac{\partial \psi}{\partial y}, \quad \frac{\partial \phi}{\partial y} = -\frac{\partial \psi}{\partial x} ∂ x ∂ ϕ ​ = ∂ y ∂ ψ ​ , ∂ y ∂ ϕ ​ = − ∂ x ∂ ψ ​

These are the celebrated Cauchy-Riemann Equations from complex variable theory, proving that the complex potential W ( z ) = ϕ ( x , y ) + i ψ ( x , y ) W(z) = \phi(x,y) + i\psi(x,y) W ( z ) = ϕ ( x , y ) + i ψ ( x , y ) is an analytic function of z = x + i y z = x + iy z = x + i y .

Proof of Orthogonality:

Multiplying the slopes of the equipotential line and the streamline at their point of intersection:

( d y d x ) ϕ = const × ( d y d x ) ψ = const = ( − u v ) × ( v u ) = − 1 \left(\frac{dy}{dx}\right)_{\phi = \text{const}} \times \left(\frac{dy}{dx}\right)_{\psi = \text{const}} = \left(-\frac{u}{v}\right) \times \left(\frac{v}{u}\right) = -1 ( d x d y ​ ) ϕ = const ​ × ( d x d y ​ ) ψ = const ​ = ( − v u ​ ) × ( u v ​ ) = − 1

Flow Net Theorem: Equipotential lines ( ϕ = const \phi = \text{const} ϕ = const ) and streamlines ( ψ = const \psi = \text{const} ψ = const ) intersect orthogonally (at 90 ∘ 90^{\circ} 9 0 ∘ ) at every point in the flow field, except at stagnation points where u = v = 0 u = v = 0 u = v = 0 and slopes become indeterminate.

5.4 Circulation ( Γ \Gamma Γ ) and Vorticity ( ζ ⃗ \vec{\zeta} ζ ​ )

Vorticity ( ζ ⃗ \vec{\zeta} ζ ​ ): Defined as the curl of velocity vector, representing twice the angular velocity ( ω ⃗ \vec{\omega} ω ): ζ ⃗ = ∇ × V ⃗ = 2 ω ⃗ \vec{\zeta} = \nabla \times \vec{V} = 2\vec{\omega} ζ ​ = ∇ × V = 2 ω In 2D plane flow ( x y xy x y ): ζ z = 2 ω z = ∂ v ∂ x − ∂ u ∂ y \zeta_z = 2\omega_z = \frac{\partial v}{\partial x} - \frac{\partial u}{\partial y} ζ z ​ = 2 ω z ​ = ∂ x ∂ v ​ − ∂ y ∂ u ​

Circulation ( Γ \Gamma Γ ): Line integral of the tangential velocity component around a closed contour C C C : Γ = ∮ C V ⃗ ⋅ d r ⃗ = ∬ A ( ∇ × V ⃗ ) ⋅ d A ⃗ = ∬ A ζ z d A = 2 ω z A \Gamma = \oint_C \vec{V} \cdot d\vec{r} = \iint_A (\nabla \times \vec{V}) \cdot d\vec{A} = \iint_A \zeta_z \, dA = 2\omega_z A Γ = ∮ C ​ V ⋅ d r = ∬ A ​ ( ∇ × V ) ⋅ d A = ∬ A ​ ζ z ​ d A = 2 ω z ​ A For an irrotational vortex, Γ = constant \Gamma = \text{constant} Γ = constant and velocity v θ = Γ 2 π r v_{\theta} = \frac{\Gamma}{2\pi r} v θ ​ = 2 π r Γ ​ .

  • 6. Euler's Equation of Motion & Bernoulli's Principle
  • 6.1 Euler's Equation along a Streamline

Applying Newton's Second Law ( ∑ d F s = d m ⋅ a s \sum dF_s = dm \cdot a_s ∑ d F s ​ = d m ⋅ a s ​ ) to a fluid element moving along a streamline s s s without viscous friction:

− ∂ P ∂ s d s d A − ρ g d s d A cos ⁡ θ = ρ d s d A ( V ∂ V ∂ s ) - \frac{\partial P}{\partial s} ds \, dA - \rho g \, ds \, dA \cos\theta = \rho \, ds \, dA \left(V\frac{\partial V}{\partial s}\right) − ∂ s ∂ P ​ d s d A − ρ g d s d A cos θ = ρ d s d A ( V ∂ s ∂ V ​ )

Since cos ⁡ θ = d z d s \cos\theta = \frac{dz}{ds} cos θ = d s d z ​ , dividing by ρ d s d A \rho \, ds \, dA ρ d s d A yields Euler's Equation of Motion :

  • d P ρ + V d V + g d z = 0 \frac{dP}{\rho} + V dV + g dz = 0 ρ d P ​ + V d V + g d z = 0
  • 6.2 Bernoulli's Equation

Integrating Euler's equation along a streamline for an incompressible fluid ( ρ = constant \rho = \text{constant} ρ = constant ):

∫ d P ρ + ∫ V d V + ∫ g d z = constant \int \frac{dP}{\rho} + \int V dV + \int g dz = \text{constant} ∫ ρ d P ​ + ∫ V d V + ∫ g d z = constant

P ρ + V 2 2 + g z = constant \frac{P}{\rho} + \frac{V^2}{2} + g z = \text{constant} ρ P ​ + 2 V 2 ​ + g z = constant

Dividing throughout by acceleration due to gravity g g g yields the standard head form:

P ρ g + V 2 2 g + z = constant = H \frac{P}{\rho g} + \frac{V^2}{2g} + z = \text{constant} = H ρ g P ​ + 2 g V 2 ​ + z = constant = H

P γ ⏟ Pressure Head + V 2 2 g ⏟ Velocity Head / Kinetic Head + z ⏟ Datum / Potential Head = H ⏟ Total Energy Head \underbrace{\frac{P}{\gamma}}_{\text{Pressure Head}} + \underbrace{\frac{V^2}{2g}}_{\text{Velocity Head / Kinetic Head}} + \underbrace{z}_{\text{Datum / Potential Head}} = \underbrace{H}_{\text{Total Energy Head}} Pressure Head γ P ​ ​ ​ + Velocity Head / Kinetic Head 2 g V 2 ​ ​ ​ + Datum / Potential Head z ​ ​ = Total Energy Head H ​ ​

Piezometric Head: Sum of pressure head and datum head ( h piezo = P γ + z h_{\text{piezo}} = \frac{P}{\gamma} + z h piezo ​ = γ P ​ + z ).

Total Head ( H H H ): Sum of piezometric head and dynamic velocity head.

The Four Strict Assumptions of Bernoulli's Equation:

Steady Flow: Flow parameters at any point do not vary with time ( ∂ / ∂ t = 0 \partial/\partial t = 0 ∂ / ∂ t = 0 ).

Incompressible Flow: Fluid density ρ \rho ρ is constant throughout.

Frictionless / Inviscid Fluid: Dynamic viscosity μ = 0 \mu = 0 μ = 0 (viscous shear stresses are negligible).

Flow along a Streamline: The constant H H H applies strictly along an individual streamline. (Exception: If the entire flow field is irrotational, ∇ × V ⃗ = 0 \nabla \times \vec{V} = 0 ∇ × V = 0 , then H H H has the identical constant value throughout the entire flow domain).

Real Fluid Flow with Friction Head Loss ( h L h_L h L ​ ):

Between section 1 (upstream) and section 2 (downstream):

P 1 ρ g + V 1 2 2 g + z 1 = P 2 ρ g + V 2 2 2 g + z 2 + h L \frac{P_1}{\rho g} + \frac{V_1^2}{2g} + z_1 = \frac{P_2}{\rho g} + \frac{V_2^2}{2g} + z_2 + h_L ρ g P 1 ​ ​ + 2 g V 1 2 ​ ​ + z 1 ​ = ρ g P 2 ​ ​ + 2 g V 2 2 ​ ​ + z 2 ​ + h L ​

7. Flow Measurement Devices Venturimeter: Orifice Meter:

  • Converging Throat Diverging Pipe Orifice Plate
  • ================\====/=============== =========[ | ]=========
  • | | \|/
  • | h | Vena | Recirculation
  • +----+ Contracta| Eddies
  • 7.1 The Venturimeter

Consists of:

Convergent Cone: Short cone with convergence angle ≈ 20 ∘ − 22 ∘ \approx 20^{\circ} - 22^{\circ} ≈ 2 0 ∘ − 2 2 ∘ (accelerates fluid smoothly).

Throat: Cylindrical throat section of diameter d 2 ≈ ( 1 3 to 1 2 ) d 1 d_2 \approx \left(\frac{1}{3} \text{ to } \frac{1}{2}\right) d_1 d 2 ​ ≈ ( 3 1 ​ to 2 1 ​ ) d 1 ​ (minimum area, maximum velocity, minimum pressure).

Divergent Cone: Long, gradual cone with divergence angle ≈ 5 ∘ − 7 ∘ \approx 5^{\circ} - 7^{\circ} ≈ 5 ∘ − 7 ∘ . The small angle is strictly engineered to prevent boundary layer separation, turbulence, and eddy formation .

Theoretical and Actual Discharge:

Applying Bernoulli's and Continuity ( a 1 V 1 = a 2 V 2 a_1 V_1 = a_2 V_2 a 1 ​ V 1 ​ = a 2 ​ V 2 ​ ) between inlet (1) and throat (2):

Q th = a 1 a 2 a 1 2 − a 2 2 2 g h Q_{\text{th}} = \frac{a_1 a_2}{\sqrt{a_1^2 - a_2^2}} \sqrt{2gh} Q th ​ = a 1 2 ​ − a 2 2 ​ ​ a 1 ​ a 2 ​ ​ 2 g h ​

Q act = C d Q th = C d a 1 a 2 a 1 2 − a 2 2 2 g h Q_{\text{act}} = C_d Q_{\text{th}} = C_d \frac{a_1 a_2}{\sqrt{a_1^2 - a_2^2}} \sqrt{2gh} Q act ​ = C d ​ Q th ​ = C d ​ a 1 2 ​ − a 2 2 ​ ​ a 1 ​ a 2 ​ ​ 2 g h ​

Where:

C d C_d C d ​ is the Coefficient of Discharge (for Venturimeters, C d ≈ 0.95 − 0.98 C_d \approx 0.95 - 0.98 C d ​ ≈ 0.95 − 0.98 due to streamlined flow and minimal friction losses).

h h h is the differential piezometric head: h = ( P 1 γ + z 1 ) − ( P 2 γ + z 2 ) = x ( S m S − 1 ) h = \left(\frac{P_1}{\gamma} + z_1\right) - \left(\frac{P_2}{\gamma} + z_2\right) = x\left(\frac{S_m}{S} - 1\right) h = ( γ P 1 ​ ​ + z 1 ​ ) − ( γ P 2 ​ ​ + z 2 ​ ) = x ( S S m ​ ​ − 1 ) for a heavy manometric fluid.

7.2 The Orifice Meter

A flat circular plate with a sharp-edged concentric hole (diameter d 0 d_0 d 0 ​ ) clamped between pipe flanges.

Vena Contracta: The section downstream of the orifice where fluid streamlines converge to a minimum cross-sectional area a c a_c a c ​ , yielding maximum velocity. Occurs at distance ≈ 0.5 d 0 \approx 0.5 d_0 ≈ 0.5 d 0 ​ downstream.

Hydraulic Coefficients:

Coefficient of Contraction ( C c C_c C c ​ ): C c = a c a 0 ≈ 0.61 − 0.64 C_c = \frac{a_c}{a_0} \approx 0.61 - 0.64 C c ​ = a 0 ​ a c ​ ​ ≈ 0.61 − 0.64

Coefficient of Velocity ( C v C_v C v ​ ): C v = V act V th ≈ 0.97 − 0.98 C_v = \frac{V_{\text{act}}}{V_{\text{th}}} \approx 0.97 - 0.98 C v ​ = V th ​ V act ​ ​ ≈ 0.97 − 0.98

Coefficient of Discharge ( C d C_d C d ​ ): C d = C c × C v ≈ 0.60 − 0.65 C_d = C_c \times C_v \approx 0.60 - 0.65 C d ​ = C c ​ × C v ​ ≈ 0.60 − 0.65

Actual Discharge Formula: Q act = C d a 1 a 0 a 1 2 − a 0 2 2 g h Q_{\text{act}} = C_d \frac{a_1 a_0}{\sqrt{a_1^2 - a_0^2}} \sqrt{2gh} Q act ​ = C d ​ a 1 2 ​ − a 0 2 ​ ​ a 1 ​ a 0 ​ ​ 2 g h ​

Venturi vs. Orifice Comparison: Orifice meters are inexpensive and require short installation lengths, but cause substantial permanent head loss ( 30 % − 40 % 30\% - 40\% 30% − 40% of differential head) due to severe eddy dissipation downstream of the vena contracta.

7.3 The Pitot Tube and Pitot-Static Tube

Used for measuring local point velocities in pipes, mine ventilation shafts, and open channels.

Stagnation Point: The point at the tip of the tube opening directly into the flow where fluid velocity is brought completely to rest ( V = 0 V = 0 V = 0 ).

Stagnation Pressure ( P stag P_{\text{stag}} P stag ​ ): By Bernoulli's equation between free stream (0) and stagnation point ( s s s ): P stag = P static + P dynamic = P 0 + 1 2 ρ V 2 P_{\text{stag}} = P_{\text{static}} + P_{\text{dynamic}} = P_0 + \frac{1}{2}\rho V^2 P stag ​ = P static ​ + P dynamic ​ = P 0 ​ + 2 1 ​ ρ V 2 H stag = h static + V 2 2 g H_{\text{stag}} = h_{\text{static}} + \frac{V^2}{2g} H stag ​ = h static ​ + 2 g V 2 ​

Local Flow Velocity ( V V V ): V = C v 2 g ( H stag − h static ) = C v 2 g Δ h = C v 2 g x ( S m S − 1 ) V = C_v \sqrt{2g (H_{\text{stag}} - h_{\text{static}})} = C_v \sqrt{2g \Delta h} = C_v \sqrt{2g x \left(\frac{S_m}{S} - 1\right)} V = C v ​ 2 g ( H stag ​ − h static ​ ) ​ = C v ​ 2 g Δ h ​ = C v ​ 2 gx ( S S m ​ ​ − 1 ) ​ For standard calibrated pitot tubes, C v ≈ 0.98 − 1.00 C_v \approx 0.98 - 1.00 C v ​ ≈ 0.98 − 1.00 .

8. Worked Engineering Example

Problem:

A horizontal Venturimeter with inlet diameter d 1 = 300 mm d_1 = 300\text{ mm} d 1 ​ = 300 mm and throat diameter d 2 = 150 mm d_2 = 150\text{ mm} d 2 ​ = 150 mm is installed in a pipeline carrying coal slurry of specific gravity S = 1.25 S = 1.25 S = 1.25 . A differential U-tube mercury manometer ( S m = 13.6 S_m = 13.6 S m ​ = 13.6 ) connected between the inlet and throat registers a deflection of x = 200 mm = 0.20 m x = 200\text{ mm} = 0.20\text{ m} x = 200 mm = 0.20 m . Assuming C d = 0.97 C_d = 0.97 C d ​ = 0.97 , calculate:

The differential head in meters of the flowing slurry.

The actual volumetric discharge ( Q act Q_{\text{act}} Q act ​ ) through the pipeline in m 3 / s \text{m}^3/\text{s} m 3 / s and litres/s \text{litres/s} litres/s .

Solution:

Differential Piezometric Head ( h h h ): h = x ( S m S − 1 ) = 0.20 ( 13.6 1.25 − 1 ) = 0.20 ( 10.88 − 1 ) = 0.20 × 9.88 = 1.976 m of slurry h = x \left(\frac{S_m}{S} - 1\right) = 0.20 \left(\frac{13.6}{1.25} - 1\right) = 0.20 \left(10.88 - 1\right) = 0.20 \times 9.88 = 1.976\text{ m of slurry} h = x ( S S m ​ ​ − 1 ) = 0.20 ( 1.25 13.6 ​ − 1 ) = 0.20 ( 10.88 − 1 ) = 0.20 × 9.88 = 1.976 m of slurry

Cross-Sectional Areas: a 1 = π d 1 2 4 = π × 0.30 2 4 = 0.070686 m 2 a_1 = \frac{\pi d_1^2}{4} = \frac{\pi \times 0.30^2}{4} = 0.070686\text{ m}^2 a 1 ​ = 4 π d 1 2 ​ ​ = 4 π × 0.3 0 2 ​ = 0.070686 m 2 a 2 = π d 2 2 4 = π × 0.15 2 4 = 0.017671 m 2 a_2 = \frac{\pi d_2^2}{4} = \frac{\pi \times 0.15^2}{4} = 0.017671\text{ m}^2 a 2 ​ = 4 π d 2 2 ​ ​ = 4 π × 0.1 5 2 ​ = 0.017671 m 2 a 1 a 2 = ( d 1 d 2 ) 2 = ( 300 150 ) 2 = 4.0 ⟹ a 1 = 4 a 2 \frac{a_1}{a_2} = \left(\frac{d_1}{d_2}\right)^2 = \left(\frac{300}{150}\right)^2 = 4.0 \implies a_1 = 4 a_2 a 2 ​ a 1 ​ ​ = ( d 2 ​ d 1 ​ ​ ) 2 = ( 150 300 ​ ) 2 = 4.0 ⟹ a 1 ​ = 4 a 2 ​

Theoretical Velocity and Discharge: a 1 2 − a 2 2 = ( 4 a 2 ) 2 − a 2 2 = 15 a 2 2 = a 2 15 = 0.017671 × 3.87298 = 0.06844 m 2 \sqrt{a_1^2 - a_2^2} = \sqrt{(4 a_2)^2 - a_2^2} = \sqrt{15 a_2^2} = a_2 \sqrt{15} = 0.017671 \times 3.87298 = 0.06844\text{ m}^2 a 1 2 ​ − a 2 2 ​ ​ = ( 4 a 2 ​ ) 2 − a 2 2 ​ ​ = 15 a 2 2 ​ ​ = a 2 ​ 15 ​ = 0.017671 × 3.87298 = 0.06844 m 2 2 g h = 2 × 9.81 × 1.976 = 38.769 = 6.2265 m/s \sqrt{2gh} = \sqrt{2 \times 9.81 \times 1.976} = \sqrt{38.769} = 6.2265\text{ m/s} 2 g h ​ = 2 × 9.81 × 1.976 ​ = 38.769 ​ = 6.2265 m/s Q th = a 1 a 2 2 g h a 1 2 − a 2 2 = 0.070686 × 0.017671 × 6.2265 0.06844 = 0.11364 m 3 / s Q_{\text{th}} = \frac{a_1 a_2 \sqrt{2gh}}{\sqrt{a_1^2 - a_2^2}} = \frac{0.070686 \times 0.017671 \times 6.2265}{0.06844} = 0.11364\text{ m}^3/\text{s} Q th ​ = a 1 2 ​ − a 2 2 ​ ​ a 1 ​ a 2 ​ 2 g h ​ ​ = 0.06844 0.070686 × 0.017671 × 6.2265 ​ = 0.11364 m 3 / s

Actual Discharge ( Q act Q_{\text{act}} Q act ​ ): Q act = C d × Q th = 0.97 × 0.11364 = 0.11023 m 3 / s Q_{\text{act}} = C_d \times Q_{\text{th}} = 0.97 \times 0.11364 = 0.11023\text{ m}^3/\text{s} Q act ​ = C d ​ × Q th ​ = 0.97 × 0.11364 = 0.11023 m 3 / s Q act = 0.11023 × 1000 = 110.23 litres/second Q_{\text{act}} = 0.11023 \times 1000 = 110.23\text{ litres/second} Q act ​ = 0.11023 × 1000 = 110.23 litres/second The pipeline flow rate is 110.23 L/s 110.23\text{ L/s} 110.23 L/s .