Study guide
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy
Key Takeaways Explain This Topic AI
Dynamic viscosity ( μ \mu μ ) governs fluid shear resistance, while kinematic viscosity ( ν = μ / ρ \nu = \mu/\rho ν = μ / ρ ) represents momentum diffusivity; gas viscosity increases with temperature ( μ ∝ T \mu \propto \sqrt{T} μ ∝ T ), whereas liquid viscosity decreases due to weakened cohesive forces.
Non-Newtonian fluids follow the Ostwald-de Waele power law τ = τ 0 + k ( d u / d y ) n \tau = \tau_0 + k(du/dy)^n τ = τ 0 + k ( d u / d y ) n , classifying drilling muds and dense coal slurries as Bingham plastics or pseudoplastics.
The total hydrostatic force on any submerged plane area is F = ρ g A h ˉ F = \rho g A \bar{h} F = ρ g A h ˉ , with the center of pressure always acting below the area centroid by h c p − h ˉ = I G sin 2 θ A h ˉ h_{cp} - \bar{h} = \frac{I_G \sin^2\theta}{A \bar{h}} h c p − h ˉ = A h ˉ I G s i n 2 θ .
Floating body rotational stability requires a positive metacentric height ( G M = I x x V − B G > 0 GM = \frac{I_{xx}}{V} - BG > 0 GM = V I xx − BG > 0 ), where the metacentric radius B M = I / V BM = I/V BM = I / V dictates restoring righting moments.
Inverted and inclined micro-manometers provide high amplification factors ( 1 / sin θ 1/\sin\theta 1/ sin θ ) for measuring tiny static pressure differences across mine ventilation regulators and slurry pipelines.
Last updated: August 2026
Fluid Statics, Hydrostatic Forces & Buoyancy
In heavy industrial and mining operations—such as Coal India Limited (CIL) opencast pit dewatering, dense-medium coal washery cyclone circuits, tailings dam stability, and underground mine drainage—fluid statics forms the cornerstone of structural and hydraulic design. Fluid statics deals with fluids at rest, where shear stresses are identically zero ( τ = 0 \tau = 0 τ = 0 ) and only normal compressive stresses (hydrostatic pressure) exist.
- 1. Fundamental Fluid Properties
- 1.1 Density, Specific Weight, and Specific Gravity
Mass Density ( ρ \rho ρ ): Mass per unit volume, ρ = m / V \rho = m/V ρ = m / V (SI unit: kg/m 3 \text{kg/m}^3 kg/m 3 ). For pure water at 4 ∘ C 4^{\circ}\text{C} 4 ∘ C and standard atmospheric pressure, ρ w = 1000 kg/m 3 \rho_{w} = 1000\text{ kg/m}^3 ρ w = 1000 kg/m 3 .
Specific Weight / Weight Density ( γ \gamma γ or w w w ): Weight per unit volume, γ = ρ g \gamma = \rho g γ = ρ g (SI unit: N/m 3 \text{N/m}^3 N/m 3 ). For water, γ w = 1000 × 9.81 = 9810 N/m 3 = 9.81 kN/m 3 \gamma_w = 1000 \times 9.81 = 9810\text{ N/m}^3 = 9.81\text{ kN/m}^3 γ w = 1000 × 9.81 = 9810 N/m 3 = 9.81 kN/m 3 .
Specific Volume ( v v v ): Volume per unit mass, v = 1 / ρ v = 1/\rho v = 1/ ρ (SI unit: m 3 /kg \text{m}^3\text{/kg} m 3 /kg ).
Specific Gravity / Relative Density ( S S S or R D RD R D ): Dimensionless ratio of fluid density to standard reference fluid density: S = ρ fluid ρ water at 4 ∘ C = γ fluid γ water S = \frac{\rho_{\text{fluid}}}{\rho_{\text{water at } 4^{\circ}\text{C}}} = \frac{\gamma_{\text{fluid}}}{\gamma_{\text{water}}} S = ρ water at 4 ∘ C ρ fluid = γ water γ fluid For mercury ( H g Hg H g ), S H g = 13.6 S_{Hg} = 13.6 S H g = 13.6 , yielding ρ H g = 13600 kg/m 3 \rho_{Hg} = 13600\text{ kg/m}^3 ρ H g = 13600 kg/m 3 and γ H g = 133.42 kN/m 3 \gamma_{Hg} = 133.42\text{ kN/m}^3 γ H g = 133.42 kN/m 3 .
1.2 Viscosity: Dynamic and Kinematic
Viscosity is the property by virtue of which a fluid offers internal resistance to relative deformation or shear movement of adjacent fluid layers. y ^ Moving Plate (Velocity = U, Area = A)
- | =======================================> Force F
- | --> u(y) Velocity Profile
- | ---->
- | ------->
- | ========== (Fixed Boundary, y = 0, u = 0)
- +--------------------------------------------> x
According to Newton's Law of Viscosity , the shear stress τ \tau τ between adjacent fluid layers is directly proportional to the rate of shear strain (or velocity gradient perpendicular to the flow direction, d u / d y du/dy d u / d y ): τ = μ d u d y \tau = \mu \frac{du}{dy} τ = μ d y d u
Where:
- τ = F A \tau = \frac{F}{A} τ = A F is the shear stress ( N/m 2 \text{N/m}^2 N/m 2 or Pa \text{Pa} Pa )
- μ \mu μ is the Dynamic Viscosity (or absolute viscosity)
d u d y \frac{du}{dy} d y d u is the velocity gradient or rate of angular deformation ( s − 1 \text{s}^{-1} s − 1 )
Units and Conversions for Dynamic Viscosity ( μ \mu μ ):
SI Unit: Pa ⋅ s = N ⋅ s m 2 = kg m ⋅ s \text{Pa}\cdot\text{s} = \frac{\text{N}\cdot\text{s}}{\text{m}^2} = \frac{\text{kg}}{\text{m}\cdot\text{s}} Pa ⋅ s = m 2 N ⋅ s = m ⋅ s kg
CGS Unit: Poise = dyne ⋅ s cm 2 = g cm ⋅ s \text{Poise} = \frac{\text{dyne}\cdot\text{s}}{\text{cm}^2} = \frac{\text{g}}{\text{cm}\cdot\text{s}} Poise = cm 2 dyne ⋅ s = cm ⋅ s g
Crucial PSU Conversion: 1 Pa ⋅ s = 10 Poise = 1000 cP (centipoise) 1\text{ Pa}\cdot\text{s} = 10\text{ Poise} = 1000\text{ cP (centipoise)} 1 Pa ⋅ s = 10 Poise = 1000 cP (centipoise) 1 Poise = 0.1 Pa ⋅ s = 0.1 N ⋅ s/m 2 1\text{ Poise} = 0.1\text{ Pa}\cdot\text{s} = 0.1\text{ N}\cdot\text{s/m}^2 1 Poise = 0.1 Pa ⋅ s = 0.1 N ⋅ s/m 2 For water at 20 ∘ C 20^{\circ}\text{C} 2 0 ∘ C , μ w ≈ 1.0 × 10 − 3 Pa ⋅ s = 1.0 cP = 0.01 Poise \mu_w \approx 1.0\times 10^{-3}\text{ Pa}\cdot\text{s} = 1.0\text{ cP} = 0.01\text{ Poise} μ w ≈ 1.0 × 1 0 − 3 Pa ⋅ s = 1.0 cP = 0.01 Poise .
Kinematic Viscosity ( ν \nu ν ):
Kinematic viscosity represents the ratio of absolute dynamic viscosity to mass density, measuring momentum diffusivity: ν = μ ρ \nu = \frac{\mu}{\rho} ν = ρ μ
- SI Unit: m 2 / s \text{m}^2/\text{s} m 2 / s
- CGS Unit: Stokes = cm 2 / s \text{Stokes} = \text{cm}^2/\text{s} Stokes = cm 2 / s
Crucial PSU Conversion: 1 Stoke = 10 − 4 m 2 / s 1\text{ Stoke} = 10^{-4}\text{ m}^2/\text{s} 1 Stoke = 1 0 − 4 m 2 / s 1 cSt (centistoke) = 10 − 6 m 2 / s = 1 mm 2 / s 1\text{ cSt (centistoke)} = 10^{-6}\text{ m}^2/\text{s} = 1\text{ mm}^2/\text{s} 1 cSt (centistoke) = 1 0 − 6 m 2 / s = 1 mm 2 / s
Temperature Dependence of Viscosity:
Liquids: Viscosity is dominated by intermolecular cohesive forces . As temperature increases, thermal agitation expands intermolecular spacing, reducing cohesion. Consequently, liquid viscosity decreases with increasing temperature : μ L ( T ) = μ 0 e − b T \mu_L(T) = \mu_0 e^{-b T} μ L ( T ) = μ 0 e − b T
Gases: Viscosity is dominated by molecular momentum transfer across streamlines. As temperature rises, average molecular speed v ˉ r m s ∝ T \bar{v}_{rms} \propto \sqrt{T} v ˉ r m s ∝ T increases, intensifying collisions and momentum exchange. Consequently, gas viscosity increases with increasing temperature : μ G ∝ T \mu_G \propto \sqrt{T} μ G ∝ T
2. Rheological Classification of Fluids
Real engineering fluids, coal-water slurries, drill polymer muds, and lubricants are categorized by their constitutive shear stress vs. strain rate relation, formalized by the Ostwald-de Waele Power Law Model : τ = τ 0 + k ( d u d y ) n \tau = \tau_0 + k \left(\frac{du}{dy}\right)^n τ = τ 0 + k ( d y d u ) n
Where τ 0 \tau_0 τ 0 is the yield stress, k k k is the consistency index, and n n n is the flow behavior index. The apparent dynamic viscosity is μ a = τ d u / d y = τ 0 ( d u d y ) − 1 + k ( d u d y ) n − 1 \mu_a = \frac{\tau}{du/dy} = \tau_0 \left(\frac{du}{dy}\right)^{-1} + k \left(\frac{du}{dy}\right)^{n-1} μ a = d u / d y τ = τ 0 ( d y d u ) − 1 + k ( d y d u ) n − 1 . Shear Stress (tau) ^
- | / Bingham Plastic (tau_0 > 0, n = 1)
- | / (Toothpaste, Sewage Sludge, Drilling Mud)
- | /
- tau_0 --+-----+--------------------------------
- | / / Dilatant (n > 1, shear-thickening)
- | / / (Quicksand, Starch/Water, Butter)
- | / /
- | / /-- Newtonian (n = 1, tau_0 = 0)
- |/ / (Water, Air, Gasoline, Thin Oils)
- | /
- | / Pseudoplastic (n < 1, shear-thinning)
- | / (Blood, Paint, Milk, Coal Slurry)
- +-------------------------------------------> du/dy
Fluid Classification Yield Stress ( τ 0 \tau_0 τ 0 ) Flow Index ( n n n ) Apparent Viscosity Behavior Representative Examples
Ideal / Perfect Fluid τ 0 = 0 \tau_0 = 0 τ 0 = 0 — μ = 0 \mu = 0 μ = 0 (Inviscid, Incompressible) Theoretical mathematical idealization
Newtonian Fluid τ 0 = 0 \tau_0 = 0 τ 0 = 0 n = 1 n = 1 n = 1 Constant μ \mu μ independent of d u / d y du/dy d u / d y Water, air, kerosene, light lubricating oil, alcohol
Pseudoplastic (Shear-Thinning) τ 0 = 0 \tau_0 = 0 τ 0 = 0 n < 1 n < 1 n < 1 μ a \mu_a μ a decreases with increasing d u / d y du/dy d u / d y Dense coal-water slurry, blood, paint, polymer solutions, paper pulp
Dilatant (Shear-Thickening) τ 0 = 0 \tau_0 = 0 τ 0 = 0 n > 1 n > 1 n > 1 μ a \mu_a μ a increases with increasing d u / d y du/dy d u / d y Cornstarch suspension (oobleck), quicksand, concentrated sugar solutions
Bingham Plastic (Ideal Plastic) τ 0 > 0 \tau_0 > 0 τ 0 > 0 n = 1 n = 1 n = 1 Rigid body until τ > τ 0 \tau > \tau_0 τ > τ 0 , then linear Drilling mud, toothpaste, sewage sludge, mayonnaise, bentonite suspension
Thixotropic (Time-Dependent) τ 0 ≥ 0 \tau_0 \ge 0 τ 0 ≥ 0 n < 1 n < 1 n < 1 μ a \mu_a μ a decreases over time at constant d u / d y du/dy d u / d y Printer ink, thixotropic paints, crude oil, bentonite drilling mud at rest
Rheopectic (Time-Dependent) τ 0 ≥ 0 \tau_0 \ge 0 τ 0 ≥ 0 n > 1 n > 1 n > 1 μ a \mu_a μ a increases over time at constant d u / d y du/dy d u / d y Gypsum paste, bentonite-lubricant slurries, certain colloidal lubricants
- 3. Surface Tension, Droplet Pressure & Capillarity
- 3.1 Surface Tension ( σ \sigma σ )
Surface tension arises from the unbalanced cohesive attractive forces acting on molecules at the liquid-gas interface, resulting in an inward tensile membrane force. Unit: N/m \text{N/m} N/m or J/m 2 \text{J/m}^2 J/m 2 .
Internal Excess Pressure ( Δ P = P i n t − P e x t \Delta P = P_{int} - P_{ext} Δ P = P in t − P e x t ):
Liquid Droplet (1 Interface): Δ P ⋅ ( π d 2 4 ) = σ ⋅ ( π d ) ⟹ Δ P = 4 σ d = 2 σ R \Delta P \cdot \left(\frac{\pi d^2}{4}\right) = \sigma \cdot (\pi d) \implies \Delta P = \frac{4\sigma}{d} = \frac{2\sigma}{R} Δ P ⋅ ( 4 π d 2 ) = σ ⋅ ( π d ) ⟹ Δ P = d 4 σ = R 2 σ
Hollow Soap Bubble (2 Interfaces - Inner & Outer): Δ P ⋅ ( π d 2 4 ) = 2 ⋅ σ ⋅ ( π d ) ⟹ Δ P = 8 σ d = 4 σ R \Delta P \cdot \left(\frac{\pi d^2}{4}\right) = 2 \cdot \sigma \cdot (\pi d) \implies \Delta P = \frac{8\sigma}{d} = \frac{4\sigma}{R} Δ P ⋅ ( 4 π d 2 ) = 2 ⋅ σ ⋅ ( π d ) ⟹ Δ P = d 8 σ = R 4 σ
Liquid Jet (Cylindrical Interface of length L L L ): Δ P ⋅ ( L ⋅ d ) = σ ⋅ ( 2 L ) ⟹ Δ P = 2 σ d = σ R \Delta P \cdot (L \cdot d) = \sigma \cdot (2L) \implies \Delta P = \frac{2\sigma}{d} = \frac{\sigma}{R} Δ P ⋅ ( L ⋅ d ) = σ ⋅ ( 2 L ) ⟹ Δ P = d 2 σ = R σ
3.2 Capillarity
Capillarity is the rise or depression of a liquid meniscus in a small-bore tube (diameter d d d ) caused by the competition between adhesion (liquid-to-solid attraction) and cohesion (liquid-to-liquid attraction). Water in Glass Tube (Wetting) Mercury in Glass Tube (Non-Wetting)
- theta < 90 deg (theta ~ 0) theta > 90 deg (theta ~ 130 deg)
- | \_____/ | | ____ |
- | | | | / \ |
- -+------|------+-- Free Surface --+--+------+--+-- Free Surface
- | h (Rise) | | | |
- | | | | | h | | (Depression)
- | | | v v |
Equating upward vertical surface tension component to downward weight of the liquid column: ( σ cos θ ) ⋅ ( π d ) = ρ g ( π d 2 4 ) h (\sigma \cos\theta) \cdot (\pi d) = \rho g \left(\frac{\pi d^2}{4}\right) h ( σ cos θ ) ⋅ ( π d ) = ρ g ( 4 π d 2 ) h h = 4 σ cos θ ρ g d = 4 σ cos θ γ d h = \frac{4\sigma \cos\theta}{\rho g d} = \frac{4\sigma \cos\theta}{\gamma d} h = ρ g d 4 σ cos θ = γ d 4 σ cos θ
Wetting Liquid (e.g., Clean Water & Glass): Adhesion > > > Cohesion, contact angle θ < 90 ∘ \theta < 90^{\circ} θ < 9 0 ∘ (for pure water-clean glass, θ ≈ 0 ∘ ⟹ cos θ = 1 \theta \approx 0^{\circ} \implies \cos\theta = 1 θ ≈ 0 ∘ ⟹ cos θ = 1 ). Results in capillary rise with a concave meniscus ( h > 0 h > 0 h > 0 ).
Non-Wetting Liquid (e.g., Mercury & Glass): Cohesion > > > Adhesion, contact angle θ > 90 ∘ \theta > 90^{\circ} θ > 9 0 ∘ (for mercury-glass, θ ≈ 128 ∘ − 130 ∘ ⟹ cos θ < 0 \theta \approx 128^{\circ} - 130^{\circ} \implies \cos\theta < 0 θ ≈ 12 8 ∘ − 13 0 ∘ ⟹ cos θ < 0 ). Results in capillary depression with a convex meniscus ( h < 0 h < 0 h < 0 ).
Limit of Manometer Tube Diameter: To avoid capillary errors exceeding 1 % 1\% 1% , manometer tube inner diameters must be d ≥ 6 mm d \ge 6\text{ mm} d ≥ 6 mm (preferably d ≥ 10 mm d \ge 10\text{ mm} d ≥ 10 mm ).
3.3 Compressibility and Bulk Modulus
Bulk Modulus of Elasticity ( K K K ): K = − V d P d V = ρ d P d ρ = 1 β K = -V \frac{dP}{dV} = \rho \frac{dP}{d\rho} = \frac{1}{\beta} K = − V d V d P = ρ d ρ d P = β 1 Where β \beta β is fluid compressibility ( Pa − 1 \text{Pa}^{-1} Pa − 1 ). For water at ambient temperature, K ≈ 2.06 × 10 9 Pa = 2.06 GPa K \approx 2.06\times 10^9\text{ Pa} = 2.06\text{ GPa} K ≈ 2.06 × 1 0 9 Pa = 2.06 GPa , rendering it practically incompressible except in hydraulic water hammer calculations.
- Speed of Sound in Fluid Medium ( c c c ): c = K ρ c = \sqrt{\frac{K}{\rho}} c = ρ K
- 4. Hydrostatic Pressure & Pascal's Law
- 4.1 Pascal's Law
Pascal's Law states that the intensity of pressure at any point in a static fluid is equal in all spatial directions: P x = P y = P z P_x = P_y = P_z P x = P y = P z
4.2 Hydrostatic Law (Variation of Pressure with Depth)
In a static fluid under gravity, the vertical pressure gradient balances specific weight: d P d z = − ρ g = − γ ⟹ d P d h = ρ g = γ \frac{dP}{dz} = -\rho g = -\gamma \implies \frac{dP}{dh} = \rho g = \gamma d z d P = − ρ g = − γ ⟹ d h d P = ρ g = γ
Integrating for an incompressible homogeneous fluid ( ρ = constant \rho = \text{constant} ρ = constant ): P = P 0 + ρ g h = P atm + γ h P = P_0 + \rho g h = P_{\text{atm}} + \gamma h P = P 0 + ρ g h = P atm + γh
Pressure Head ( h h h ): Height of equivalent column of liquid of density ρ \rho ρ generating pressure P P P : h = P ρ g = P γ h = \frac{P}{\rho g} = \frac{P}{\gamma} h = ρ g P = γ P
Absolute vs. Gauge Pressure: P abs = P atm + P gauge P_{\text{abs}} = P_{\text{atm}} + P_{\text{gauge}} P abs = P atm + P gauge P vacuum = P atm − P abs = − P gauge P_{\text{vacuum}} = P_{\text{atm}} - P_{\text{abs}} = -P_{\text{gauge}} P vacuum = P atm − P abs = − P gauge Standard atmospheric pressure: P atm = 101.325 kPa = 1.01325 bar = 760 mm Hg = 10.33 m of H 2 O P_{\text{atm}} = 101.325\text{ kPa} = 1.01325\text{ bar} = 760\text{ mm Hg} = 10.33\text{ m of } \text{H}_2\text{O} P atm = 101.325 kPa = 1.01325 bar = 760 mm Hg = 10.33 m of H 2 O .
5. Manometry and Pressure Measurement
Manometers measure static pressure differences by balancing fluid columns.
5.1 Simple U-Tube Manometer
For measuring gauge pressure P A P_A P A of a fluid of density ρ 1 \rho_1 ρ 1 with manometric fluid of density ρ m \rho_m ρ m (where ρ m > ρ 1 \rho_m > \rho_1 ρ m > ρ 1 ): P A + ρ 1 g h 1 = P atm + ρ m g h 2 P_A + \rho_1 g h_1 = P_{\text{atm}} + \rho_m g h_2 P A + ρ 1 g h 1 = P atm + ρ m g h 2 P A , gauge = ρ m g h 2 − ρ 1 g h 1 P_{A,\text{gauge}} = \rho_m g h_2 - \rho_1 g h_1 P A , gauge = ρ m g h 2 − ρ 1 g h 1
5.2 Differential U-Tube Manometer
Connecting two pipe points A A A and B B B containing fluids ρ 1 \rho_1 ρ 1 and ρ 2 \rho_2 ρ 2 at levels h 1 h_1 h 1 and h 2 h_2 h 2 above a datum, with manometric liquid ρ m \rho_m ρ m showing deflection x x x : P A − P B = ρ m g x + ρ 2 g h 2 − ρ 1 g ( h 1 + x ) P_A - P_B = \rho_m g x + \rho_2 g h_2 - \rho_1 g (h_1 + x) P A − P B = ρ m gx + ρ 2 g h 2 − ρ 1 g ( h 1 + x )
If both pipes carry the same fluid ( ρ 1 = ρ 2 = ρ \rho_1 = \rho_2 = \rho ρ 1 = ρ 2 = ρ ) at the same center level ( h 1 = h 2 h_1 = h_2 h 1 = h 2 ): P A − P B = g x ( ρ m − ρ ) = ρ g x ( S m S − 1 ) P_A - P_B = g x (\rho_m - \rho) = \rho g x \left(\frac{S_m}{S} - 1\right) P A − P B = gx ( ρ m − ρ ) = ρ gx ( S S m − 1 ) Δ h = P A − P B ρ g = x ( S m S − 1 ) \Delta h = \frac{P_A - P_B}{\rho g} = x \left(\frac{S_m}{S} - 1\right) Δ h = ρ g P A − P B = x ( S S m − 1 )
5.3 Inverted Differential U-Tube Manometer
Used for measuring tiny pressure differences between liquids. The top is filled with a lighter manometric fluid (air or light oil of density ρ m < ρ \rho_m < \rho ρ m < ρ ): P A − P B = ρ g ( h 1 − h 2 ) − ρ m g x = g x ( ρ − ρ m ) P_A - P_B = \rho g (h_1 - h_2) - \rho_m g x = g x (\rho - \rho_m) P A − P B = ρ g ( h 1 − h 2 ) − ρ m gx = gx ( ρ − ρ m ) Δ h = x ( 1 − S m S ) \Delta h = x \left(1 - \frac{S_m}{S}\right) Δ h = x ( 1 − S S m )
5.4 Inclined Micro-Manometer
An inclined leg at angle θ \theta θ to the horizontal magnifies meniscus travel L L L along the tube: h = L sin θ h = L \sin\theta h = L sin θ Magnification / Sensitivity Factor = L h = 1 sin θ \text{Magnification / Sensitivity Factor} = \frac{L}{h} = \frac{1}{\sin\theta} Magnification / Sensitivity Factor = h L = sin θ 1
For θ = 30 ∘ \theta = 30^{\circ} θ = 3 0 ∘ , sin 30 ∘ = 0.5 \sin 30^{\circ} = 0.5 sin 3 0 ∘ = 0.5 , giving a magnification of 2.0 × 2.0\times 2.0 × ; for θ = 5.74 ∘ \theta = 5.74^{\circ} θ = 5.7 4 ∘ , sin θ ≈ 0.1 \sin\theta \approx 0.1 sin θ ≈ 0.1 , giving a 10 × 10\times 10 × magnification.
- 6. Hydrostatic Forces on Submerged Plane & Curved Surfaces Free Water Surface (h = 0)
- ===============================================================
- \ theta (Angle of inclination)
- \
- \ Centroid G (at depth h_bar, slant distance y_bar)
- \------* G
- \ \
- \ * CP (Center of Pressure at depth h_cp, slant y_cp)
- \======
- 6.1 Total Hydrostatic Force on Plane Surfaces
For any plane surface of area A A A inclined at angle θ \theta θ to the free surface with its area centroid at depth h ˉ \bar{h} h ˉ : F = ∫ P d A = ∫ ( ρ g h ) d A = ρ g sin θ ∫ y d A = ρ g sin θ ( A y ˉ ) = ρ g A h ˉ F = \int P \, dA = \int (\rho g h) \, dA = \rho g \sin\theta \int y \, dA = \rho g \sin\theta (A \bar{y}) = \rho g A \bar{h} F = ∫ P d A = ∫ ( ρ g h ) d A = ρ g sin θ ∫ y d A = ρ g sin θ ( A y ˉ ) = ρ g A h ˉ F = γ A h ˉ F = \gamma A \bar{h} F = γ A h ˉ
Key Rule: Total hydrostatic thrust depends solely on fluid density ρ \rho ρ , surface area A A A , and centroidal depth h ˉ \bar{h} h ˉ . It is entirely independent of the angle of inclination θ \theta θ .
6.2 Center of Pressure ( h c p h_{cp} h c p or y c p y_{cp} y c p )
The Center of Pressure is the point on the submerged surface where the resultant hydrostatic force acts. By taking moments about the free surface axis ( F ⋅ y c p = ∫ y ⋅ d F F \cdot y_{cp} = \int y \cdot dF F ⋅ y c p = ∫ y ⋅ d F ): y c p = y ˉ + I G A y ˉ y_{cp} = \bar{y} + \frac{I_G}{A \bar{y}} y c p = y ˉ + A y ˉ I G
Since h = y sin θ h = y \sin\theta h = y sin θ , h ˉ = y ˉ sin θ \bar{h} = \bar{y} \sin\theta h ˉ = y ˉ sin θ , and h c p = y c p sin θ h_{cp} = y_{cp} \sin\theta h c p = y c p sin θ : h c p = h ˉ + I G sin 2 θ A h ˉ h_{cp} = \bar{h} + \frac{I_G \sin^2\theta}{A \bar{h}} h c p = h ˉ + A h ˉ I G sin 2 θ
Where I G I_G I G is the second moment of area (area moment of inertia) of the plane figure about its centroidal axis parallel to the free liquid surface.
Fundamental Properties of Center of Pressure:
Since I G sin 2 θ A h ˉ > 0 \frac{I_G \sin^2\theta}{A \bar{h}} > 0 A h ˉ I G s i n 2 θ > 0 , the center of pressure h c p h_{cp} h c p always lies strictly below the centroid h ˉ \bar{h} h ˉ .
For a vertical plane ( θ = 90 ∘ ⟹ sin 2 θ = 1 \theta = 90^{\circ} \implies \sin^2\theta = 1 θ = 9 0 ∘ ⟹ sin 2 θ = 1 ): h c p = h ˉ + I G A h ˉ h_{cp} = \bar{h} + \frac{I_G}{A \bar{h}} h c p = h ˉ + A h ˉ I G
For a horizontal plane ( θ = 0 ∘ ⟹ sin 2 θ = 0 \theta = 0^{\circ} \implies \sin^2\theta = 0 θ = 0 ∘ ⟹ sin 2 θ = 0 ): h c p = h ˉ h_{cp} = \bar{h} h c p = h ˉ
As depth increases ( h ˉ → ∞ \bar{h} \to \infty h ˉ → ∞ ), I G sin 2 θ A h ˉ → 0 \frac{I_G \sin^2\theta}{A \bar{h}} \to 0 A h ˉ I G s i n 2 θ → 0 , meaning h c p h_{cp} h c p approaches h ˉ \bar{h} h ˉ .
Geometric Properties of Common Submerged Surfaces:
Geometric Shape Area ( A A A ) Centroid ( y ˉ \bar{y} y ˉ ) from Top Centroidal Inertia ( I G I_G I G ) Vertical Center of Pressure ( h c p h_{cp} h c p with top edge at free surface)
Rectangle ( b × d b \times d b × d ) b ⋅ d b \cdot d b ⋅ d d / 2 d/2 d /2 b d 3 12 \frac{b d^3}{12} 12 b d 3 h ˉ + b d 3 / 12 b d ( d / 2 ) = d 2 + d 6 = 2 3 d \bar{h} + \frac{bd^3/12}{bd(d/2)} = \frac{d}{2} + \frac{d}{6} = \frac{2}{3}d h ˉ + b d ( d /2 ) b d 3 /12 = 2 d + 6 d = 3 2 d
Circle (Diameter D D D ) π D 2 4 \frac{\pi D^2}{4} 4 π D 2 D / 2 D/2 D /2 π D 4 64 \frac{\pi D^4}{64} 64 π D 4 h ˉ + π D 4 / 64 ( π D 2 / 4 ) ( D / 2 ) = D 2 + D 8 = 5 8 D \bar{h} + \frac{\pi D^4/64}{(\pi D^2/4)(D/2)} = \frac{D}{2} + \frac{D}{8} = \frac{5}{8}D h ˉ + ( π D 2 /4 ) ( D /2 ) π D 4 /64 = 2 D + 8 D = 8 5 D
Triangle (Base b b b , Height h h h , Vertex at free surface) b h 2 \frac{b h}{2} 2 bh 2 3 h \frac{2}{3}h 3 2 h b h 3 36 \frac{b h^3}{36} 36 b h 3 2 3 h + b h 3 / 36 ( b h / 2 ) ( 2 h / 3 ) = 2 3 h + h 12 = 3 4 h \frac{2}{3}h + \frac{bh^3/36}{(bh/2)(2h/3)} = \frac{2}{3}h + \frac{h}{12} = \frac{3}{4}h 3 2 h + ( bh /2 ) ( 2 h /3 ) b h 3 /36 = 3 2 h + 12 h = 4 3 h
Triangle (Base b b b at free surface, Vertex down) b h 2 \frac{b h}{2} 2 bh 1 3 h \frac{1}{3}h 3 1 h b h 3 36 \frac{b h^3}{36} 36 b h 3 1 3 h + b h 3 / 36 ( b h / 2 ) ( h / 3 ) = 1 3 h + h 6 = 1 2 h \frac{1}{3}h + \frac{bh^3/36}{(bh/2)(h/3)} = \frac{1}{3}h + \frac{h}{6} = \frac{1}{2}h 3 1 h + ( bh /2 ) ( h /3 ) b h 3 /36 = 3 1 h + 6 h = 2 1 h
6.3 Hydrostatic Forces on Curved Submerged Surfaces
On a curved surface, pressure vectors vary continuously in direction. The resultant force is resolved into orthogonal components: Free Water Surface
- ================================
- | | |
- | Fluid | Vertical |
- | Column | Projected |
- | (Weight = | Area A_x |
- | F_y) | |
- | v |
- +--------------+ <--- F_x (Horizontal Component = rho*g*A_proj*h_bar)
- \ /
- \ Curved /
- \ Surface/
- +------+
- |
- v F_y (Vertical Component = Weight of fluid column above surface)
Horizontal Component ( F x F_x F x ): Equal to the hydrostatic force exerted on the vertical projection of the curved surface ( A proj A_{\text{proj}} A proj ): F x = ρ g A proj h ˉ proj F_x = \rho g A_{\text{proj}} \bar{h}_{\text{proj}} F x = ρ g A proj h ˉ proj Acts at the center of pressure of the projected vertical area.
Vertical Component ( F y F_y F y ): Equal to the weight of the liquid column vertically above the curved surface extending up to the free liquid surface: F y = ρ g V column = γ V column F_y = \rho g V_{\text{column}} = \gamma V_{\text{column}} F y = ρ g V column = γ V column Acts through the center of gravity of this imaginary or real liquid volume.
Resultant Force ( F R F_R F R ) and Line of Action: F R = F x 2 + F y 2 F_R = \sqrt{F_x^2 + F_y^2} F R = F x 2 + F y 2 tan α = F y F x \tan\alpha = \frac{F_y}{F_x} tan α = F x F y For circular-arc gates/surfaces, F R F_R F R always passes through the center of curvature because every differential hydrostatic pressure vector d P = P d A dP = P \, dA d P = P d A acts normal to the surface (radially through the center).
- 7. Archimedes' Principle, Buoyancy & Floatation
- 7.1 Archimedes' Principle and Center of Buoyancy
Buoyant Force ( F B F_B F B ): When a body is completely or partially submerged in a fluid, it is buoyed up by a net upward vertical force equal to the weight of the fluid displaced by the body: F B = ρ fluid ⋅ g ⋅ V displaced = γ fluid ⋅ V displaced F_B = \rho_{\text{fluid}} \cdot g \cdot V_{\text{displaced}} = \gamma_{\text{fluid}} \cdot V_{\text{displaced}} F B = ρ fluid ⋅ g ⋅ V displaced = γ fluid ⋅ V displaced
Center of Buoyancy ( B B B ): The point of application of the buoyant force F B F_B F B . It coincides exactly with the centroid of the displaced liquid volume .
Principle of Floatation: For a floating body in static equilibrium, total weight W W W equals buoyant force F B F_B F B : W = F B ⟹ m body g = ρ fluid g V submerged W = F_B \implies m_{\text{body}} g = \rho_{\text{fluid}} g V_{\text{submerged}} W = F B ⟹ m body g = ρ fluid g V submerged V submerged V total = ρ body ρ fluid = S body S fluid \frac{V_{\text{submerged}}}{V_{\text{total}}} = \frac{\rho_{\text{body}}}{\rho_{\text{fluid}}} = \frac{S_{\text{body}}}{S_{\text{fluid}}} V total V submerged = ρ fluid ρ body = S fluid S body
7.2 Metacenter and Metacentric Height ( G M GM GM )
For a floating body given a small angular tilt (heel angle θ \theta θ ):
The submerged shape changes, causing the centroid of displaced volume to shift from B B B to B ′ B' B ′ .
The line of action of the new buoyant force through B ′ B' B ′ intersects the original vertical center line of the body at the Metacenter ( M M M ) . Original Axis Tilted Axis (Angle theta)
- | /
- | / M (Metacenter)
- | / |
- | / | GM (Metacentric Height)
- | * G |
- | / | Restoring Couple =
- | * B | W * GM * sin(theta)
- | / v
- | * B'
Metacentric Height ( G M GM GM ): The distance between the center of gravity G G G and the metacenter M M M : G M = B M − B G GM = BM - BG GM = BM − BG Where:
B M BM BM is the Metacentric Radius (distance from B B B to M M M ): B M = I x x V displaced BM = \frac{I_{xx}}{V_{\text{displaced}}} BM = V displaced I xx where I x x I_{xx} I xx is the second moment of area of the waterplane section (plane of flotation at liquid surface) about the tilting/longitudinal axis.
B G BG BG is the vertical distance between the center of buoyancy B B B and center of gravity G G G ( B G = y G − y B BG = y_G - y_B BG = y G − y B ).
- Therefore: G M = I V − B G GM = \frac{I}{V} - BG GM = V I − BG
- 7.3 Stability Conditions for Submerged vs. Floating Bodies
A. Completely Submerged Bodies (e.g., Submarines, Submerged Mine Sensors):
State of Equilibrium Relative Positions of B B B and G G G Physical Behavior upon Small Angular Tilt
Stable Equilibrium B B B is strictly above G G G ( B G > 0 BG > 0 BG > 0 ) F B F_B F B and W W W produce a restoring couple that returns body to upright position
Unstable Equilibrium B B B is strictly below G G G F B F_B F B and W W W produce an overturning couple that increases tilt
Neutral Equilibrium B B B and G G G coincide ( B = G B = G B = G ) No couple is generated; body remains in its new tilted position
B. Partially Submerged / Floating Bodies (e.g., Dredgers, Barges, Pontoons):
State of Equilibrium Metacentric Height ( G M GM GM ) Position of M M M relative to G G G Couple Generated
Stable Equilibrium G M > 0 GM > 0 GM > 0 M M M is strictly above G G G Restoring Righting Couple ( T R = W ⋅ G M sin θ T_R = W \cdot GM \sin\theta T R = W ⋅ GM sin θ )
Unstable Equilibrium G M < 0 GM < 0 GM < 0 M M M is strictly below G G G Overturning Destabilizing Couple
Neutral Equilibrium G M = 0 GM = 0 GM = 0 M M M coincides with G G G Zero net moment; body rests at whatever angle tilted
7.4 Time Period of Rolling (Oscillation) of a Floating Vessel
Treating the rolling floating vessel as an angular harmonic oscillator: I mass d 2 θ d t 2 + W ⋅ G M ⋅ sin θ = 0 I_{\text{mass}} \frac{d^2\theta}{dt^2} + W \cdot GM \cdot \sin\theta = 0 I mass d t 2 d 2 θ + W ⋅ GM ⋅ sin θ = 0
For small angular displacements ( sin θ ≈ θ \sin\theta \approx \theta sin θ ≈ θ and I mass = W g k 2 I_{\text{mass}} = \frac{W}{g} k^2 I mass = g W k 2 , where k k k is the radius of gyration of the body about the longitudinal axis of oscillation): T = 2 π k 2 g ⋅ G M T = 2\pi \sqrt{\frac{k^2}{g \cdot GM}} T = 2 π g ⋅ GM k 2
Engineering Trade-Off in Vessel Design:
Large G M GM GM (High Stability): Very safe against capsizing, but results in a small time period T T T (fast, violent rolling with high angular accelerations, causing severe passenger discomfort and cargo shift).
Small G M GM GM (Passenger / Cargo Comfort): Large time period T T T (smooth, gentle rolling), but reduces safety margin against overturning.
Typical G M GM GM values: Merchant cargo ships ≈ 0.3 − 1.0 m \approx 0.3 - 1.0\text{ m} ≈ 0.3 − 1.0 m ; Warships ≈ 1.0 − 1.8 m \approx 1.0 - 1.8\text{ m} ≈ 1.0 − 1.8 m ; River barges ≈ 1.5 − 3.0 m \approx 1.5 - 3.0\text{ m} ≈ 1.5 − 3.0 m .
- 8. Worked Engineering Examples
- Example 1: Hydrostatic Force and Center of Pressure on an Inclined Sluice Gate
Problem: A rectangular sluice gate of width b = 2 m b = 2\text{ m} b = 2 m and height d = 3 m d = 3\text{ m} d = 3 m in a coal washery reservoir is hinged at its top edge. The gate is inclined at an angle of θ = 60 ∘ \theta = 60^{\circ} θ = 6 0 ∘ to the horizontal. The top edge of the gate is at a vertical depth of h 1 = 2 m h_1 = 2\text{ m} h 1 = 2 m below the free water surface ( ρ = 1000 kg/m 3 , g = 9.81 m/s 2 \rho = 1000\text{ kg/m}^3, g = 9.81\text{ m/s}^2 ρ = 1000 kg/m 3 , g = 9.81 m/s 2 ). Determine:
The total hydrostatic thrust on the gate.
The vertical depth to the center of pressure ( h c p h_{cp} h c p ).
Solution:
Centroid Depth ( h ˉ \bar{h} h ˉ ): h ˉ = h 1 + ( d 2 ) sin θ = 2.0 + ( 3.0 2 ) sin 60 ∘ = 2.0 + 1.5 × 0.8660 = 2.0 + 1.299 = 3.299 m \bar{h} = h_1 + \left(\frac{d}{2}\right) \sin\theta = 2.0 + \left(\frac{3.0}{2}\right) \sin 60^{\circ} = 2.0 + 1.5 \times 0.8660 = 2.0 + 1.299 = 3.299\text{ m} h ˉ = h 1 + ( 2 d ) sin θ = 2.0 + ( 2 3.0 ) sin 6 0 ∘ = 2.0 + 1.5 × 0.8660 = 2.0 + 1.299 = 3.299 m
Total Hydrostatic Thrust ( F F F ): A = b × d = 2.0 × 3.0 = 6.0 m 2 A = b \times d = 2.0 \times 3.0 = 6.0\text{ m}^2 A = b × d = 2.0 × 3.0 = 6.0 m 2 F = ρ g A h ˉ = 1000 × 9.81 × 6.0 × 3.299 = 194 , 179 N = 194.18 kN F = \rho g A \bar{h} = 1000 \times 9.81 \times 6.0 \times 3.299 = 194,179\text{ N} = 194.18\text{ kN} F = ρ g A h ˉ = 1000 × 9.81 × 6.0 × 3.299 = 194 , 179 N = 194.18 kN
Center of Pressure Depth ( h c p h_{cp} h c p ): I G = b d 3 12 = 2.0 × 3.0 3 12 = 54.0 12 = 4.5 m 4 I_G = \frac{b d^3}{12} = \frac{2.0 \times 3.0^3}{12} = \frac{54.0}{12} = 4.5\text{ m}^4 I G = 12 b d 3 = 12 2.0 × 3. 0 3 = 12 54.0 = 4.5 m 4 h c p = h ˉ + I G sin 2 θ A h ˉ = 3.299 + 4.5 × ( sin 60 ∘ ) 2 6.0 × 3.299 h_{cp} = \bar{h} + \frac{I_G \sin^2\theta}{A \bar{h}} = 3.299 + \frac{4.5 \times (\sin 60^{\circ})^2}{6.0 \times 3.299} h c p = h ˉ + A h ˉ I G sin 2 θ = 3.299 + 6.0 × 3.299 4.5 × ( sin 6 0 ∘ ) 2 ( sin 60 ∘ ) 2 = 0.75 (\sin 60^{\circ})^2 = 0.75 ( sin 6 0 ∘ ) 2 = 0.75 h c p = 3.299 + 4.5 × 0.75 19.794 = 3.299 + 3.375 19.794 = 3.299 + 0.1705 = 3.4695 m ≈ 3.47 m h_{cp} = 3.299 + \frac{4.5 \times 0.75}{19.794} = 3.299 + \frac{3.375}{19.794} = 3.299 + 0.1705 = 3.4695\text{ m} \approx 3.47\text{ m} h c p = 3.299 + 19.794 4.5 × 0.75 = 3.299 + 19.794 3.375 = 3.299 + 0.1705 = 3.4695 m ≈ 3.47 m
Example 2: Metacentric Height of a Rectangular Pontoon
Problem: A rectangular flat-bottomed pontoon barge used for mine sump dredging has a width B = 6 m B = 6\text{ m} B = 6 m , length L = 10 m L = 10\text{ m} L = 10 m , and draught D = 2 m D = 2\text{ m} D = 2 m in fresh water. The center of gravity G G G of the loaded barge is on the vertical centerline at y G = 1.6 m y_G = 1.6\text{ m} y G = 1.6 m above the base. Determine the metacentric height ( G M GM GM ) and state whether the barge is in stable equilibrium.
Solution:
Center of Buoyancy ( y B y_B y B ): For a uniform rectangular hull, the centroid of displaced volume is at half the draught: y B = D 2 = 2.0 2 = 1.0 m above the base y_B = \frac{D}{2} = \frac{2.0}{2} = 1.0\text{ m above the base} y B = 2 D = 2 2.0 = 1.0 m above the base
Distance B G BG BG : B G = y G − y B = 1.6 − 1.0 = 0.6 m BG = y_G - y_B = 1.6 - 1.0 = 0.6\text{ m} BG = y G − y B = 1.6 − 1.0 = 0.6 m
Metacentric Radius ( B M = I / V BM = I/V BM = I / V ):
Waterplane area moment of inertia about the tilting (longitudinal) axis: I x x = L B 3 12 = 10.0 × 6.0 3 12 = 10.0 × 216.0 12 = 180.0 m 4 I_{xx} = \frac{L B^3}{12} = \frac{10.0 \times 6.0^3}{12} = \frac{10.0 \times 216.0}{12} = 180.0\text{ m}^4 I xx = 12 L B 3 = 12 10.0 × 6. 0 3 = 12 10.0 × 216.0 = 180.0 m 4
Displaced volume of water: V disp = L × B × D = 10.0 × 6.0 × 2.0 = 120.0 m 3 V_{\text{disp}} = L \times B \times D = 10.0 \times 6.0 \times 2.0 = 120.0\text{ m}^3 V disp = L × B × D = 10.0 × 6.0 × 2.0 = 120.0 m 3
Metacentric radius: B M = I x x V disp = 180.0 120.0 = 1.5 m BM = \frac{I_{xx}}{V_{\text{disp}}} = \frac{180.0}{120.0} = 1.5\text{ m} BM = V disp I xx = 120.0 180.0 = 1.5 m
Metacentric Height ( G M GM GM ): G M = B M − B G = 1.5 − 0.6 = + 0.9 m GM = BM - BG = 1.5 - 0.6 = +0.9\text{ m} GM = BM − BG = 1.5 − 0.6 = + 0.9 m Since G M = + 0.9 m > 0 GM = +0.9\text{ m} > 0 GM = + 0.9 m > 0 ( M M M lies 0.9 m 0.9\text{ m} 0.9 m above G G G ), the pontoon is in stable equilibrium .