Study guide

11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps

Key Takeaways Explain This Topic AI

Euler's turbomachinery equation governs rotor-fluid energy transfer: W = ρ Q ( u 1 V w 1 − u 2 V w 2 ) W = \rho Q (u_1 V_{w1} - u_2 V_{w2}) W = ρQ ( u 1 ​ V w 1 ​ − u 2 ​ V w 2 ​ ) for turbines and W = ρ Q ( u 2 V w 2 − u 1 V w 1 ) W = \rho Q (u_2 V_{w2} - u_1 V_{w1}) W = ρQ ( u 2 ​ V w 2 ​ − u 1 ​ V w 1 ​ ) for centrifugal pumps.

Hydraulic turbines are selected based on specific speed ( N s = N P / H 5 / 4 N_s = N\sqrt{P}/H^{5/4} N s ​ = N P ​ / H 5/4 ): Pelton impulse for high head ( N s = 10 − 60 N_s = 10-60 N s ​ = 10 − 60 ), Francis reaction for medium head ( N s = 60 − 300 N_s = 60-300 N s ​ = 60 − 300 ), and Kaplan axial reaction for low head ( N s = 300 − 1000 N_s = 300-1000 N s ​ = 300 − 1000 ).

Centrifugal pumps universally employ backward curved vanes ( β 2 < 90 ∘ \beta_2 < 90^{\circ} β 2 ​ < 9 0 ∘ ) to produce a stable, drooping head-discharge characteristic with non-overloading motor power curves.

Cavitation occurs when local static pressure falls below the liquid vapor pressure ( P < P v P < P_v P < P v ​ ), governed by Net Positive Suction Head ( NPSH available > NPSH required \text{NPSH}_{\text{available}} > \text{NPSH}_{\text{required}} NPSH available ​ > NPSH required ​ ) and Thoma's cavitation parameter σ \sigma σ .

Air vessels installed on reciprocating pumps eliminate acceleration head over main pipe runs, saving 84.8 % 84.8\% 84.8% of frictional work in single-acting pumps and 39.2 % 39.2\% 39.2% in double-acting pumps.

Last updated: August 2026

Hydraulic Turbines, Centrifugal & Reciprocating Pumps

Hydraulic machinery converts hydraulic energy into mechanical shaft work (turbines) or inputs shaft work to boost fluid pressure and elevation (pumps). In Coal India operations, heavy-duty centrifugal slurry and multistage mine drainage pumps dewater underground mine sumps and pit bottoms against high static heads, while reciprocating positive-displacement pumps inject high-pressure hydraulic fluid into powered longwall roof supports.

1. Euler's Turbomachine Equation & Velocity Triangles Inlet Velocity Triangle (Turbine Runner):

  • V_1 (Absolute Velocity)
  • /|\
  • / | \
  • (Relative) / | \ V_f1 (Flow Velocity)
  • V_r1 / | \
  • /____|____\ (alpha_1 = Guide Vane Angle, beta_1 = Blade Angle)
  • <-- u_1 --->
  • <------- V_w1 -------> (Whirl Velocity)

1.1 Velocity Triangle Nomenclature:

V V V : Absolute velocity of fluid ( m/s \text{m/s} m/s )

u = π D N 60 u = \frac{\pi D N}{60} u = 60 π D N ​ : Tangential peripheral blade velocity ( m/s \text{m/s} m/s )

V r = V ⃗ − u ⃗ V_r = \vec{V} - \vec{u} V r ​ = V − u : Relative velocity of fluid with respect to blade

V w = V cos ⁡ α V_w = V\cos\alpha V w ​ = V cos α : Whirl (tangential) component of absolute velocity (produces angular momentum)

V f = V sin ⁡ α V_f = V\sin\alpha V f ​ = V sin α : Flow (axial or radial) component of absolute velocity (governs discharge Q = A V f Q = A V_f Q = A V f ​ )

  • α \alpha α : Guide vane / nozzle angle with tangential direction
  • β \beta β : Runner / impeller blade angle with tangential direction

1.2 Euler's Equation for Energy Transfer:

Applying the Angular Momentum Principle (Torque T = m ˙ ( r 1 V w 1 − r 2 V w 2 ) T = \dot{m}(r_1 V_{w1} - r_2 V_{w2}) T = m ˙ ( r 1 ​ V w 1 ​ − r 2 ​ V w 2 ​ ) ):

For Hydraulic Turbines (Work extracted from fluid): W = m ˙ ( u 1 V w 1 − u 2 V w 2 ) = ρ Q ( u 1 V w 1 − u 2 V w 2 ) W = \dot{m}(u_1 V_{w1} - u_2 V_{w2}) = \rho Q (u_1 V_{w1} - u_2 V_{w2}) W = m ˙ ( u 1 ​ V w 1 ​ − u 2 ​ V w 2 ​ ) = ρQ ( u 1 ​ V w 1 ​ − u 2 ​ V w 2 ​ ) H Euler = u 1 V w 1 − u 2 V w 2 g H_{\text{Euler}} = \frac{u_1 V_{w1} - u_2 V_{w2}}{g} H Euler ​ = g u 1 ​ V w 1 ​ − u 2 ​ V w 2 ​ ​

For Pumps (Work delivered to fluid): W pump = ρ Q ( u 2 V w 2 − u 1 V w 1 ) W_{\text{pump}} = \rho Q (u_2 V_{w2} - u_1 V_{w1}) W pump ​ = ρQ ( u 2 ​ V w 2 ​ − u 1 ​ V w 1 ​ ) H Euler = u 2 V w 2 − u 1 V w 1 g H_{\text{Euler}} = \frac{u_2 V_{w2} - u_1 V_{w1}}{g} H Euler ​ = g u 2 ​ V w 2 ​ − u 1 ​ V w 1 ​ ​

2. Pelton Wheel (Impulse Turbine)

The Pelton Wheel is a tangential-flow impulse turbine designed for high head ( H > 250 m H > 250\text{ m} H > 250 m ) and low discharge ( Q Q Q ) . High Pressure Water

  • from Penstock ======>> [ Nozzle with Spear ]
  • |
  • v High Velocity Jet (V_1 = C_v * sqrt(2gH))
  • (( Bucket ))
  • // \\
  • || Runner ||
  • \\ //
  • (( Bucket ))
  • 2.1 Operating Principle & Jet Mechanics

All available pressure head is completely converted into kinetic energy at atmospheric pressure across the nozzle spear valve: V 1 = C v 2 g H V_1 = C_v \sqrt{2gH} V 1 ​ = C v ​ 2 g H ​ Where C v ≈ 0.98 − 0.99 C_v \approx 0.98 - 0.99 C v ​ ≈ 0.98 − 0.99 is the nozzle velocity coefficient.

Speed Ratio ( ϕ \phi ϕ ): ϕ = u 1 2 g H ≈ 0.44 − 0.48 ( Theoretically 0.50 ) \phi = \frac{u_1}{\sqrt{2gH}} \approx 0.44 - 0.48 \quad (\text{Theoretically } 0.50) ϕ = 2 g H ​ u 1 ​ ​ ≈ 0.44 − 0.48 ( Theoretically 0.50 )

Runner Bucket Deflection Angle: Double-hemispherical bucket with central splitter ridge. Jet deflection angle θ ≈ 165 ∘ − 170 ∘ \theta \approx 165^{\circ} - 170^{\circ} θ ≈ 16 5 ∘ − 17 0 ∘ , leaving bucket at outlet angle β 2 = 180 ∘ − θ ≈ 10 ∘ − 15 ∘ \beta_2 = 180^{\circ} - \theta \approx 10^{\circ} - 15^{\circ} β 2 ​ = 18 0 ∘ − θ ≈ 1 0 ∘ − 1 5 ∘ .

2.2 Theoretical Hydraulic Efficiency ( η h \eta_h η h ​ )

Assuming relative velocity reduction factor k = V r 2 / V r 1 ≤ 1 k = V_{r2}/V_{r1} \le 1 k = V r 2 ​ / V r 1 ​ ≤ 1 ( k = 1 k = 1 k = 1 for frictionless bucket): η h = Work Done/sec Jet Kinetic Energy/sec = 2 u ( V 1 − u ) ( 1 + k cos ⁡ β 2 ) V 1 2 \eta_h = \frac{\text{Work Done/sec}}{\text{Jet Kinetic Energy/sec}} = \frac{2 u (V_1 - u)(1 + k \cos\beta_2)}{V_1^2} η h ​ = Jet Kinetic Energy/sec Work Done/sec ​ = V 1 2 ​ 2 u ( V 1 ​ − u ) ( 1 + k cos β 2 ​ ) ​

Maximum Hydraulic Efficiency Condition: Differentiating η h \eta_h η h ​ with respect to u u u and setting d η h d u = 0 \frac{d\eta_h}{du} = 0 d u d η h ​ ​ = 0 : u = V 1 2 u = \frac{V_1}{2} u = 2 V 1 ​ ​ η h , max ⁡ = 1 + k cos ⁡ β 2 2 \eta_{h,\max} = \frac{1 + k \cos\beta_2}{2} η h , m a x ​ = 2 1 + k cos β 2 ​ ​ For frictionless bucket ( k = 1 k = 1 k = 1 ) and ideal 180 ∘ 180^{\circ} 18 0 ∘ reversal ( β 2 = 0 ∘ ⟹ cos ⁡ 0 ∘ = 1 \beta_2 = 0^{\circ} \implies \cos 0^{\circ} = 1 β 2 ​ = 0 ∘ ⟹ cos 0 ∘ = 1 ): η h , max ⁡ = 1 + 1 2 = 100 % \eta_{h,\max} = \frac{1 + 1}{2} = 100\% η h , m a x ​ = 2 1 + 1 ​ = 100% (In practice, β 2 ≈ 15 ∘ \beta_2 \approx 15^{\circ} β 2 ​ ≈ 1 5 ∘ prevents the exiting jet from hitting the back of the advancing bucket, giving η h , max ⁡ ≈ 94 % − 96 % \eta_{h,\max} \approx 94\% - 96\% η h , m a x ​ ≈ 94% − 96% ).

2.3 Pelton Wheel Geometric Design Ratios

Jet Ratio ( m m m ): Ratio of pitch diameter of runner ( D D D ) to jet diameter ( d d d ): m = D d ≈ 11 − 16 ( Standard design default m = 12 ) m = \frac{D}{d} \approx 11 - 16 \quad (\text{Standard design default } m = 12) m = d D ​ ≈ 11 − 16 ( Standard design default m = 12 )

Number of Buckets on Runner ( Z Z Z - Tygun's Empirical Formula): Z = 15 + m 2 = 15 + D 2 d Z = 15 + \frac{m}{2} = 15 + \frac{D}{2d} Z = 15 + 2 m ​ = 15 + 2 d D ​

3. Francis Reaction Turbine

The Francis Turbine is an inward mixed-flow reaction turbine designed for medium head ( 60 m < H < 250 m 60\text{ m} < H < 250\text{ m} 60 m < H < 250 m ) and medium discharge . Spiral Scroll Casing

  • +-----------------------+
  • | Stay Ring |
  • | Guide Vanes (alpha) |
  • | Runner Blades |
  • | (Radial Inward) |
  • | | |
  • | v |
  • | Draft Tube |
  • +-----------------------+
  • 3.1 Velocity Triangles & Radial Discharge Condition

For maximum hydraulic efficiency in Francis turbines, water discharges radially from the runner outlet : α 2 = 90 ∘ ⟹ V w 2 = 0 , V 2 = V f 2 \alpha_2 = 90^{\circ} \implies V_{w2} = 0, \quad V_2 = V_{f2} α 2 ​ = 9 0 ∘ ⟹ V w 2 ​ = 0 , V 2 ​ = V f 2 ​

Under radial discharge at exit, Euler's head simplifies to: H e = u 1 V w 1 g H_e = \frac{u_1 V_{w1}}{g} H e ​ = g u 1 ​ V w 1 ​ ​ η h = u 1 V w 1 g H \eta_h = \frac{u_1 V_{w1}}{gH} η h ​ = g H u 1 ​ V w 1 ​ ​

3.2 Design Ratios:

Flow Ratio ( ψ \psi ψ ): ψ = V f 1 2 g H ≈ 0.15 − 0.30 \psi = \frac{V_{f1}}{\sqrt{2gH}} \approx 0.15 - 0.30 ψ = 2 g H ​ V f 1 ​ ​ ≈ 0.15 − 0.30

Speed Ratio ( ϕ \phi ϕ ): ϕ = u 1 2 g H ≈ 0.60 − 0.90 \phi = \frac{u_1}{\sqrt{2gH}} \approx 0.60 - 0.90 ϕ = 2 g H ​ u 1 ​ ​ ≈ 0.60 − 0.90

3.3 The Draft Tube

A gradually expanding airtight conduit connecting the runner exit (section 2) to the tailrace (section 3).

Functions of Draft Tube:

Allows the turbine to be installed above the tailrace level without losing head (creates suction head z 2 z_2 z 2 ​ at runner exit).

Recovers a large fraction of the kinetic energy V 2 2 2 g \frac{V_2^2}{2g} 2 g V 2 2 ​ ​ rejected by the runner, converting it into useful pressure head by deceleration.

Draft Tube Efficiency ( η d \eta_d η d ​ ): η d = Actual Kinetic Head Converted into Pressure Head Kinetic Head entering Draft Tube = V 2 2 − V 3 2 2 g − h L V 2 2 2 g \eta_d = \frac{\text{Actual Kinetic Head Converted into Pressure Head}}{\text{Kinetic Head entering Draft Tube}} = \frac{\frac{V_2^2 - V_3^2}{2g} - h_L}{\frac{V_2^2}{2g}} η d ​ = Kinetic Head entering Draft Tube Actual Kinetic Head Converted into Pressure Head ​ = 2 g V 2 2 ​ ​ 2 g V 2 2 ​ − V 3 2 ​ ​ − h L ​ ​

To prevent boundary layer separation, standard straight conical draft tubes have a maximum total divergence angle of ≤ 8 ∘ \le 8^{\circ} ≤ 8 ∘ .

4. Kaplan Turbine (Axial Flow Reaction Turbine)

The Kaplan Turbine is an axial-flow reaction turbine with adjustable runner blades, designed for low head ( H < 60 m H < 60\text{ m} H < 60 m ) and very high discharge ( Q Q Q ) . Hub / Boss (d_h)

  • +-------+
  • | ##### | <--- Adjustable Blades (4 to 8 blades)
  • | ##### |
  • +-------+
  • <--- D_o ---> (Outer Tip Diameter)

Axial Flow: Water flows parallel to the axis of rotation throughout: V f 1 = V f 2 = V f V_{f1} = V_{f2} = V_f V f 1 ​ = V f 2 ​ = V f ​ .

Discharge Equation: Q = π 4 ( D o 2 − d h 2 ) V f Q = \frac{\pi}{4} (D_o^2 - d_h^2) V_f Q = 4 π ​ ( D o 2 ​ − d h 2 ​ ) V f ​ Where D o D_o D o ​ is outer runner tip diameter, d h d_h d h ​ is hub/boss diameter ( d h / D o ≈ 0.35 − 0.60 d_h/D_o \approx 0.35 - 0.60 d h ​ / D o ​ ≈ 0.35 − 0.60 ).

Kaplan vs. Propeller Turbine: Propeller turbines have fixed runner blades, resulting in sharp efficiency drop at off-design loads. Kaplan turbines have simultaneously adjustable guide vanes and runner blades, maintaining a broad, flat efficiency curve ( > 90 % > 90\% > 90% ) over 30 % − 100 % 30\% - 100\% 30% − 100% load range .

  • 5. Turbine Selection, Specific Speed & Unit Quantities
  • 5.1 Specific Speed of Turbines ( N s , turbine N_{s,\text{turbine}} N s , turbine ​ )

The speed of a geometrically similar model turbine producing unit shaft power ( 1 kW 1\text{ kW} 1 kW ) under unit net head ( 1 m 1\text{ m} 1 m ): N s = N P H 5 / 4 N_s = \frac{N \sqrt{P}}{H^{5/4}} N s ​ = H 5/4 N P ​ ​

(Where N N N is in rpm, P P P is in kW, H H H is in meters).

5.2 Selection Guide based on Specific Speed:

  • Turbine Type Head Range ( H H H ) Flow Type Specific Speed ( N s N_s N s ​ in SI units)
  • Pelton Wheel (Single Jet) > 300 m > 300\text{ m} > 300 m (High) Tangential Impulse 10 − 35 10 - 35 10 − 35
  • Pelton Wheel (Multi-Jet) 150 − 300 m 150 - 300\text{ m} 150 − 300 m Tangential Impulse 35 − 60 35 - 60 35 − 60

Francis Turbine (Slow) 150 − 250 m 150 - 250\text{ m} 150 − 250 m Inward Mixed Reaction 60 − 120 60 - 120 60 − 120

Francis Turbine (Medium/Fast) 60 − 150 m 60 - 150\text{ m} 60 − 150 m Inward Mixed Reaction 120 − 300 120 - 300 120 − 300

Kaplan / Propeller Turbine 10 − 60 m 10 - 60\text{ m} 10 − 60 m (Low) Axial Reaction 300 − 1000 300 - 1000 300 − 1000

5.3 Unit Quantities (Performance Scaling under Varying Head):

  • Unit Speed ( N u N_u N u ​ ): N u = N H N_u = \frac{N}{\sqrt{H}} N u ​ = H ​ N ​
  • Unit Discharge ( Q u Q_u Q u ​ ): Q u = Q H Q_u = \frac{Q}{\sqrt{H}} Q u ​ = H ​ Q ​
  • Unit Power ( P u P_u P u ​ ): P u = P H 3 / 2 P_u = \frac{P}{H^{3/2}} P u ​ = H 3/2 P ​
  • 6. Centrifugal Pumps

A centrifugal pump operates as a dynamic turbomachine transferring shaft work to fluid via centrifugal action (a reversed reaction turbine). Centrifugal Impeller Vane Curvatures:

1. Backward-Curved Vane: 2. Radial Vane: 3. Forward-Curved Vane:

  • (beta_2 < 90 deg) (beta_2 = 90 deg) (beta_2 > 90 deg)
  • ) | (
  • Stable Drooping H-Q Flat H-Q Unstable Rising H-Q
  • Non-overloading Power Industrial Blowers High Kinetic Loss
  • 6.1 Blade Curvature & Backward Curved Vanes ( β 2 < 90 ∘ \beta_2 < 90^{\circ} β 2 ​ < 9 0 ∘ )

From the outlet velocity triangle with radial inlet ( V w 1 = 0 V_{w1} = 0 V w 1 ​ = 0 ): H m = u 2 V w 2 g = u 2 ( u 2 − V f 2 cot ⁡ β 2 ) g = u 2 2 g − ( u 2 g π D 2 b 2 ) Q cot ⁡ β 2 H_m = \frac{u_2 V_{w2}}{g} = \frac{u_2 (u_2 - V_{f2}\cot\beta_2)}{g} = \frac{u_2^2}{g} - \left(\frac{u_2}{g \pi D_2 b_2}\right) Q \cot\beta_2 H m ​ = g u 2 ​ V w 2 ​ ​ = g u 2 ​ ( u 2 ​ − V f 2 ​ cot β 2 ​ ) ​ = g u 2 2 ​ ​ − ( g π D 2 ​ b 2 ​ u 2 ​ ​ ) Q cot β 2 ​

Backward Curved Vanes ( β 2 < 90 ∘ ⟹ cot ⁡ β 2 > 0 \beta_2 < 90^{\circ} \implies \cot\beta_2 > 0 β 2 ​ < 9 0 ∘ ⟹ cot β 2 ​ > 0 ): H m H_m H m ​ decreases linearly with increasing discharge Q Q Q (drooping head-discharge characteristic). This produces self-regulating, non-overloading power demand , highest hydraulic efficiency, and stable parallel operation. All commercial centrifugal water and slurry pumps use backward curved vanes.

Forward Curved Vanes ( β 2 > 90 ∘ ⟹ cot ⁡ β 2 < 0 \beta_2 > 90^{\circ} \implies \cot\beta_2 < 0 β 2 ​ > 9 0 ∘ ⟹ cot β 2 ​ < 0 ): Head increases with discharge, causing motor overloading at high flows and hydraulic surging/instability.

6.2 Manometric Head & Efficiencies

Manometric Head ( H m H_m H m ​ ): Net actual head developed across pump flanges: H m = h s + h d + h f s + h f d + V d 2 2 g = ( P d ρ g − P s ρ g ) + ( z d − z s ) + V d 2 − V s 2 2 g H_m = h_s + h_d + h_{fs} + h_{fd} + \frac{V_d^2}{2g} = \left(\frac{P_d}{\rho g} - \frac{P_s}{\rho g}\right) + (z_d - z_s) + \frac{V_d^2 - V_s^2}{2g} H m ​ = h s ​ + h d ​ + h f s ​ + h fd ​ + 2 g V d 2 ​ ​ = ( ρ g P d ​ ​ − ρ g P s ​ ​ ) + ( z d ​ − z s ​ ) + 2 g V d 2 ​ − V s 2 ​ ​

Manometric Efficiency ( η mano \eta_{\text{mano}} η mano ​ ): η mano = g H m u 2 V w 2 \eta_{\text{mano}} = \frac{g H_m}{u_2 V_{w2}} η mano ​ = u 2 ​ V w 2 ​ g H m ​ ​

Overall Efficiency ( η o \eta_o η o ​ ): η o = Fluid Water Power Shaft Power Input = ρ g Q H m P shaft = η mano × η vol × η mech \eta_o = \frac{\text{Fluid Water Power}}{\text{Shaft Power Input}} = \frac{\rho g Q H_m}{P_{\text{shaft}}} = \eta_{\text{mano}} \times \eta_{\text{vol}} \times \eta_{\text{mech}} η o ​ = Shaft Power Input Fluid Water Power ​ = P shaft ​ ρ g Q H m ​ ​ = η mano ​ × η vol ​ × η mech ​

Specific Speed of Pumps ( N s , pump N_{s,\text{pump}} N s , pump ​ ): N s = N Q H m 3 / 4 N_s = \frac{N \sqrt{Q}}{H_m^{3/4}} N s ​ = H m 3/4 ​ N Q ​ ​ (Where N N N is rpm, Q Q Q is m 3 / s \text{m}^3/\text{s} m 3 / s , H m H_m H m ​ is meters).

6.3 Minimum Starting Speed of Centrifugal Pump

To initiate delivery flow against manometric head H m H_m H m ​ , the centrifugal head developed across impeller diameters D 1 D_1 D 1 ​ and D 2 D_2 D 2 ​ must at least balance H m H_m H m ​ : u 2 2 − u 1 2 2 g ≥ H m = η mano u 2 V w 2 g \frac{u_2^2 - u_1^2}{2g} \ge H_m = \eta_{\text{mano}} \frac{u_2 V_{w2}}{g} 2 g u 2 2 ​ − u 1 2 ​ ​ ≥ H m ​ = η mano ​ g u 2 ​ V w 2 ​ ​ N min ⁡ = 120 η mano V w 2 D 2 π ( D 2 2 − D 1 2 ) N_{\min} = \frac{120 \, \eta_{\text{mano}} \, V_{w2} \, D_2}{\pi (D_2^2 - D_1^2)} N m i n ​ = π ( D 2 2 ​ − D 1 2 ​ ) 120 η mano ​ V w 2 ​ D 2 ​ ​

6.4 Multistage Centrifugal Pumps

Pumps in Series (Multi-Impellers on Single Shaft): High head mine dewatering ( H total = n × H m H_{\text{total}} = n \times H_m H total ​ = n × H m ​ , Q Q Q constant).

Pumps in Parallel (Multiple Pumps Discharging to Common Header): High volume dewatering ( Q total = n × Q Q_{\text{total}} = n \times Q Q total ​ = n × Q , H m H_m H m ​ constant).

  • 7. Cavitation & Net Positive Suction Head (NPSH)
  • 7.1 Cavitation Phenomenon

If local absolute static pressure at any point (e.g., turbine blade suction side, pump impeller eye) drops below the saturation vapor pressure of the liquid ( P < P v P < P_v P < P v ​ ), liquid vaporizes instantly into vapor bubbles. When these bubbles are swept into downstream high-pressure zones, they collapse violently within microseconds, generating localized micro-jets with shock pressures exceeding 1000 MPa 1000\text{ MPa} 1000 MPa , causing severe pitting fatigue, vibration, noise, and steep drop in efficiency. Low Pressure Zone (P < P_v) High Pressure Zone (P > P_v)

O o . (Vapor Cavity Bubble Forms) ===> (Bubble Implodes -> 1000 MPa Micro-Jet -> Pitting Pits)

7.2 Net Positive Suction Head (NPSH) NPSH = ( P s ρ g + V s 2 2 g ) − P v ρ g = P atm ρ g − P v ρ g − h s − h f s = H atm − H v − h s − h f s \text{NPSH} = \left(\frac{P_s}{\rho g} + \frac{V_s^2}{2g}\right) - \frac{P_v}{\rho g} = \frac{P_{\text{atm}}}{\rho g} - \frac{P_v}{\rho g} - h_s - h_{fs} = H_{\text{atm}} - H_v - h_s - h_{fs} NPSH = ( ρ g P s ​ ​ + 2 g V s 2 ​ ​ ) − ρ g P v ​ ​ = ρ g P atm ​ ​ − ρ g P v ​ ​ − h s ​ − h f s ​ = H atm ​ − H v ​ − h s ​ − h f s ​

Cavitation Prevention Criterion: NPSH available > NPSH required \text{NPSH}_{\text{available}} > \text{NPSH}_{\text{required}} NPSH available ​ > NPSH required ​

Thoma's Cavitation Parameter ( σ \sigma σ ): σ = NPSH H = H atm − H v − h s H \sigma = \frac{\text{NPSH}}{H} = \frac{H_{\text{atm}} - H_v - h_s}{H} σ = H NPSH ​ = H H atm ​ − H v ​ − h s ​ ​ Cavitation occurs when σ ≤ σ c \sigma \le \sigma_c σ ≤ σ c ​ (Critical Thoma Parameter).

8. Reciprocating Pumps & Air Vessels

Reciprocating pumps are positive-displacement machines suitable for high heads and low flow rates.

  • 8.1 Theoretical Discharge & Slip
  • Single-Acting Pump: Q th = A L N 60 Q_{\text{th}} = \frac{A L N}{60} Q th ​ = 60 A L N ​

Double-Acting Pump: Q th = ( 2 A − a ) L N 60 ≈ 2 A L N 60 Q_{\text{th}} = \frac{(2A - a) L N}{60} \approx \frac{2 A L N}{60} Q th ​ = 60 ( 2 A − a ) L N ​ ≈ 60 2 A L N ​

Slip: Slip = Q th − Q act Q th × 100 % \text{Slip} = \frac{Q_{\text{th}} - Q_{\text{act}}}{Q_{\text{th}}} \times 100\% Slip = Q th ​ Q th ​ − Q act ​ ​ × 100% C d = Q act Q th = 1 − Slip C_d = \frac{Q_{\text{act}}}{Q_{\text{th}}} = 1 - \text{Slip} C d ​ = Q th ​ Q act ​ ​ = 1 − Slip

Negative Slip ( Q act > Q th ⟹ Slip < 0 , C d > 1 Q_{\text{act}} > Q_{\text{th}} \implies \text{Slip} < 0, C_d > 1 Q act ​ > Q th ​ ⟹ Slip < 0 , C d ​ > 1 ): Occurs when the delivery pipe is short, suction pipe is long, and pump operates at high speed, such that suction liquid inertia forces the delivery valve open before the suction stroke finishes.

8.2 Kinematic Heads: Acceleration and Friction

Acceleration Head ( h a h_a h a ​ ): h a = l g ( A a ) ω 2 r cos ⁡ θ h_a = \frac{l}{g} \left(\frac{A}{a}\right) \omega^2 r \cos\theta h a ​ = g l ​ ( a A ​ ) ω 2 r cos θ

Maximum at stroke ends: θ = 0 ∘ ⟹ h a , max ⁡ = l g ( A a ) ω 2 r \theta = 0^{\circ} \implies h_{a,\max} = \frac{l}{g} \left(\frac{A}{a}\right) \omega^2 r θ = 0 ∘ ⟹ h a , m a x ​ = g l ​ ( a A ​ ) ω 2 r ; zero at mid-stroke ( θ = 90 ∘ \theta = 90^{\circ} θ = 9 0 ∘ ).

Friction Head ( h f h_f h f ​ ): h f = 4 f l 2 g d ( A a ω r sin ⁡ θ ) 2 h_f = \frac{4 f l}{2 g d} \left(\frac{A}{a} \omega r \sin\theta\right)^2 h f ​ = 2 g d 4 f l ​ ( a A ​ ω r sin θ ) 2

Maximum at mid-stroke: θ = 90 ∘ \theta = 90^{\circ} θ = 9 0 ∘ ; zero at stroke ends ( θ = 0 ∘ , 180 ∘ \theta = 0^{\circ}, 180^{\circ} θ = 0 ∘ , 18 0 ∘ ).

8.3 Function of Air Vessels & Friction Work Savings

An Air Vessel is a cast-iron chamber containing compressed air at top and liquid at bottom, installed adjacent to the cylinder on suction and delivery pipes.

Primary Functions:

Converts pulsating, intermittent cylinder discharge into a continuous, uniform pipe flow.

Eliminates acceleration head over the main pipeline length beyond the air vessel.

Enables the pump to run at significantly higher speeds without cavitation separation.

Percentage Work Saved against Friction by Installing Air Vessels: 1. Single-Acting Pump (Without Vessel): With Air Vessel:

  • Sinusoidal Velocity Profile Constant Uniform Velocity
  • Friction Work ~ Integral(v^3 dt) Friction Work ~ v_avg^2 * L

===> Work Saved = 84.8% ===> Frictional dissipation slashed!

For a Single-Acting Reciprocating Pump: % Work Saved = ( 1 − π 2 8 ) ⋯ = 2 3 − 1 π 2 2 3 ≈ 84.8 % \% \text{ Work Saved} = \left(1 - \frac{\pi^2}{8}\right) \dots = \frac{\frac{2}{3} - \frac{1}{\pi^2}}{\frac{2}{3}} \approx \mathbf{84.8\%} % Work Saved = ( 1 − 8 π 2 ​ ) ⋯ = 3 2 ​ 3 2 ​ − π 2 1 ​ ​ ≈ 84.8%

For a Double-Acting Reciprocating Pump: % Work Saved = 39.2 % \% \text{ Work Saved} = \mathbf{39.2\%} % Work Saved = 39.2%

  • 9. Worked Engineering Examples
  • Problem 1: Pelton Wheel Hydraulic Efficiency and Power Calculation

A Pelton wheel develops P shaft = 6000 kW P_{\text{shaft}} = 6000\text{ kW} P shaft ​ = 6000 kW under a net head of H = 300 m H = 300\text{ m} H = 300 m running at N = 500 rpm N = 500\text{ rpm} N = 500 rpm . The bucket speed ratio is ϕ = 0.46 \phi = 0.46 ϕ = 0.46 , nozzle velocity coefficient C v = 0.98 C_v = 0.98 C v ​ = 0.98 , bucket deflection angle θ = 165 ∘ \theta = 165^{\circ} θ = 16 5 ∘ ( β 2 = 15 ∘ \beta_2 = 15^{\circ} β 2 ​ = 1 5 ∘ ), and relative velocity is reduced by 12 % 12\% 12% across the bucket due to friction ( k = 0.88 k = 0.88 k = 0.88 ). Mechanical efficiency η mech = 90 % \eta_{\text{mech}} = 90\% η mech ​ = 90% . Calculate:

The jet velocity ( V 1 V_1 V 1 ​ ) and runner pitch diameter ( D D D ).

The theoretical hydraulic efficiency ( η h \eta_h η h ​ ).

The required water flow rate ( Q Q Q ).

Solution:

Jet Velocity ( V 1 V_1 V 1 ​ ) and Runner Peripheral Velocity ( u u u ): V 1 = C v 2 g H = 0.98 × 2 × 9.81 × 300 = 0.98 × 76.72 = 75.186 m/s V_1 = C_v \sqrt{2gH} = 0.98 \times \sqrt{2 \times 9.81 \times 300} = 0.98 \times 76.72 = 75.186\text{ m/s} V 1 ​ = C v ​ 2 g H ​ = 0.98 × 2 × 9.81 × 300 ​ = 0.98 × 76.72 = 75.186 m/s u = ϕ 2 g H = 0.46 × 76.72 = 35.29 m/s u = \phi \sqrt{2gH} = 0.46 \times 76.72 = 35.29\text{ m/s} u = ϕ 2 g H ​ = 0.46 × 76.72 = 35.29 m/s

Runner Pitch Diameter ( D D D ): u = π D N 60 ⟹ D = 60 u π N = 60 × 35.29 π × 500 = 2117.4 1570.8 = 1.348 m u = \frac{\pi D N}{60} \implies D = \frac{60 u}{\pi N} = \frac{60 \times 35.29}{\pi \times 500} = \frac{2117.4}{1570.8} = 1.348\text{ m} u = 60 π D N ​ ⟹ D = π N 60 u ​ = π × 500 60 × 35.29 ​ = 1570.8 2117.4 ​ = 1.348 m

Hydraulic Efficiency ( η h \eta_h η h ​ ): η h = 2 u ( V 1 − u ) ( 1 + k cos ⁡ β 2 ) V 1 2 \eta_h = \frac{2 u (V_1 - u)(1 + k \cos\beta_2)}{V_1^2} η h ​ = V 1 2 ​ 2 u ( V 1 ​ − u ) ( 1 + k cos β 2 ​ ) ​ V 1 − u = 75.186 − 35.29 = 39.896 m/s V_1 - u = 75.186 - 35.29 = 39.896\text{ m/s} V 1 ​ − u = 75.186 − 35.29 = 39.896 m/s 1 + k cos ⁡ 15 ∘ = 1 + 0.88 × 0.9659 = 1 + 0.850 = 1.850 1 + k \cos 15^{\circ} = 1 + 0.88 \times 0.9659 = 1 + 0.850 = 1.850 1 + k cos 1 5 ∘ = 1 + 0.88 × 0.9659 = 1 + 0.850 = 1.850 η h = 2 × 35.29 × 39.896 × 1.850 ( 75.186 ) 2 = 5209.6 5652.9 = 0.9216 = 92.16 % \eta_h = \frac{2 \times 35.29 \times 39.896 \times 1.850}{(75.186)^2} = \frac{5209.6}{5652.9} = 0.9216 = 92.16\% η h ​ = ( 75.186 ) 2 2 × 35.29 × 39.896 × 1.850 ​ = 5652.9 5209.6 ​ = 0.9216 = 92.16%

Water Flow Rate ( Q Q Q ): η overall = η h × η mech = 0.9216 × 0.90 = 0.8294 = 82.94 % \eta_{\text{overall}} = \eta_h \times \eta_{\text{mech}} = 0.9216 \times 0.90 = 0.8294 = 82.94\% η overall ​ = η h ​ × η mech ​ = 0.9216 × 0.90 = 0.8294 = 82.94% P shaft = η overall ⋅ ρ g Q H P_{\text{shaft}} = \eta_{\text{overall}} \cdot \rho g Q H P shaft ​ = η overall ​ ⋅ ρ g Q H 6000 × 10 3 = 0.8294 × 1000 × 9.81 × Q × 300 6000 \times 10^3 = 0.8294 \times 1000 \times 9.81 \times Q \times 300 6000 × 1 0 3 = 0.8294 × 1000 × 9.81 × Q × 300 Q = 6000 × 10 3 2 , 440 , 924 = 2.458 m 3 / s Q = \frac{6000 \times 10^3}{2,440,924} = 2.458\text{ m}^3/\text{s} Q = 2 , 440 , 924 6000 × 1 0 3 ​ = 2.458 m 3 / s

Problem 2: Centrifugal Mine Dewatering Pump

A centrifugal pump is required to lift Q = 0.05 m 3 / s Q = 0.05\text{ m}^3/\text{s} Q = 0.05 m 3 / s of water against a total manometric head of H m = 40 m H_m = 40\text{ m} H m ​ = 40 m . The impeller diameter is D 2 = 300 mm D_2 = 300\text{ mm} D 2 ​ = 300 mm , width at outlet b 2 = 25 mm b_2 = 25\text{ mm} b 2 ​ = 25 mm , running at N = 1450 rpm N = 1450\text{ rpm} N = 1450 rpm . The outlet blade angle is backward-curved at β 2 = 30 ∘ \beta_2 = 30^{\circ} β 2 ​ = 3 0 ∘ . Assuming radial entry at inlet, determine:

The whirl velocity at outlet ( V w 2 V_{w2} V w 2 ​ ).

The manometric efficiency ( η mano \eta_{\text{mano}} η mano ​ ).

The shaft input power if mechanical efficiency is 92 % 92\% 92% .

Solution:

Peripheral Velocity ( u 2 u_2 u 2 ​ ) and Flow Velocity ( V f 2 V_{f2} V f 2 ​ ): u 2 = π D 2 N 60 = π × 0.30 × 1450 60 = 22.776 m/s u_2 = \frac{\pi D_2 N}{60} = \frac{\pi \times 0.30 \times 1450}{60} = 22.776\text{ m/s} u 2 ​ = 60 π D 2 ​ N ​ = 60 π × 0.30 × 1450 ​ = 22.776 m/s A 2 = π D 2 b 2 = π × 0.30 × 0.025 = 0.02356 m 2 A_2 = \pi D_2 b_2 = \pi \times 0.30 \times 0.025 = 0.02356\text{ m}^2 A 2 ​ = π D 2 ​ b 2 ​ = π × 0.30 × 0.025 = 0.02356 m 2 V f 2 = Q A 2 = 0.05 0.02356 = 2.122 m/s V_{f2} = \frac{Q}{A_2} = \frac{0.05}{0.02356} = 2.122\text{ m/s} V f 2 ​ = A 2 ​ Q ​ = 0.02356 0.05 ​ = 2.122 m/s

Whirl Velocity ( V w 2 V_{w2} V w 2 ​ ): V w 2 = u 2 − V f 2 cot ⁡ β 2 = 22.776 − 2.122 × cot ⁡ 30 ∘ = 22.776 − 2.122 × 1.732 = 22.776 − 3.675 = 19.101 m/s V_{w2} = u_2 - V_{f2}\cot\beta_2 = 22.776 - 2.122 \times \cot 30^{\circ} = 22.776 - 2.122 \times 1.732 = 22.776 - 3.675 = 19.101\text{ m/s} V w 2 ​ = u 2 ​ − V f 2 ​ cot β 2 ​ = 22.776 − 2.122 × cot 3 0 ∘ = 22.776 − 2.122 × 1.732 = 22.776 − 3.675 = 19.101 m/s

Manometric Efficiency ( η mano \eta_{\text{mano}} η mano ​ ): η mano = g H m u 2 V w 2 = 9.81 × 40.0 22.776 × 19.101 = 392.4 435.05 = 0.9019 = 90.19 % \eta_{\text{mano}} = \frac{g H_m}{u_2 V_{w2}} = \frac{9.81 \times 40.0}{22.776 \times 19.101} = \frac{392.4}{435.05} = 0.9019 = 90.19\% η mano ​ = u 2 ​ V w 2 ​ g H m ​ ​ = 22.776 × 19.101 9.81 × 40.0 ​ = 435.05 392.4 ​ = 0.9019 = 90.19%

Shaft Input Power ( P shaft P_{\text{shaft}} P shaft ​ ): P fluid = ρ g Q H m = 1000 × 9.81 × 0.05 × 40.0 = 19 , 620 W = 19.62 kW P_{\text{fluid}} = \rho g Q H_m = 1000 \times 9.81 \times 0.05 \times 40.0 = 19,620\text{ W} = 19.62\text{ kW} P fluid ​ = ρ g Q H m ​ = 1000 × 9.81 × 0.05 × 40.0 = 19 , 620 W = 19.62 kW P shaft = P fluid η mano × η mech = 19.62 0.9019 × 0.92 = 19.62 0.8297 = 23.65 kW P_{\text{shaft}} = \frac{P_{\text{fluid}}}{\eta_{\text{mano}} \times \eta_{\text{mech}}} = \frac{19.62}{0.9019 \times 0.92} = \frac{19.62}{0.8297} = 23.65\text{ kW} P shaft ​ = η mano ​ × η mech ​ P fluid ​ ​ = 0.9019 × 0.92 19.62 ​ = 0.8297 19.62 ​ = 23.65 kW The motor must deliver 23.65 kW 23.65\text{ kW} 23.65 kW to the pump shaft.