Study guide

11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses

Key Takeaways Explain This Topic AI

Laminar flow in circular pipes ( R e < 2000 Re < 2000 R e < 2000 ) exhibits a parabolic velocity profile u ( r ) = u max ⁡ ( 1 − r 2 / R 2 ) u(r) = u_{\max}(1 - r^2/R^2) u ( r ) = u m a x ​ ( 1 − r 2 / R 2 ) , where the maximum centerline velocity is exactly double the average velocity ( u max ⁡ = 2 V avg u_{\max} = 2 V_{\text{avg}} u m a x ​ = 2 V avg ​ ).

The Hagen-Poiseuille law dictates that laminar pipe pressure drop is directly proportional to dynamic viscosity, pipe length, and average velocity: Δ P = 32 μ V L D 2 = 128 μ Q L π D 4 \Delta P = \frac{32\mu V L}{D^2} = \frac{128\mu Q L}{\pi D^4} Δ P = D 2 32 μ V L ​ = π D 4 128 μ Q L ​ .

Darcy-Weisbach friction head loss h f = f L V 2 2 g D h_f = \frac{f L V^2}{2gD} h f ​ = 2 g D f L V 2 ​ uses f = 64 / R e f = 64/Re f = 64/ R e for laminar flow, while turbulent friction factor depends on Reynolds number and relative roughness via the Moody chart.

Equivalent pipe sizing for compound pipelines in series follows Dupuit's equation L e q D e q 5 = ∑ L i D i 5 \frac{L_{eq}}{D_{eq}^5} = \sum \frac{L_i}{D_i^5} D e q 5 ​ L e q ​ ​ = ∑ D i 5 ​ L i ​ ​ , while parallel branches share identical head loss.

Boundary layer separation occurs in adverse pressure gradients ( d P / d x > 0 dP/dx > 0 d P / d x > 0 ) when wall shear drops to zero ( ( ∂ u / ∂ y ) y = 0 = 0 (\partial u/\partial y)_{y=0} = 0 ( ∂ u / ∂ y ) y = 0 ​ = 0 ), dramatically increasing form drag on bluff structures.

Last updated: August 2026

Viscous Flow in Pipes, Boundary Layer & Minor Losses

In Coal India mining complexes, fluid transport encompasses massive pipeline systems: deep sump mine dewatering mains, sand-stowing slurry lines, hydraulic transport of coal fines, and pressurized mine fire-fighting networks. Analyzing viscous dissipation, pressure drops, pipe network equivalencies, and boundary layer mechanics is vital for sizing pumps, pipes, and ventilation conduits.

1. Reynolds Number and Flow Regimes

The Reynolds Number ( R e Re R e ) represents the ratio of dynamic inertia forces to viscous shear forces: R e = Inertia Force Viscous Force = ρ V D μ = V D ν Re = \frac{\text{Inertia Force}}{\text{Viscous Force}} = \frac{\rho V D}{\mu} = \frac{V D}{\nu} R e = Viscous Force Inertia Force ​ = μ ρ V D ​ = ν V D ​

Where:

V V V is mean flow velocity ( m/s \text{m/s} m/s )

D D D is internal pipe diameter ( m \text{m} m ) or characteristic hydraulic diameter D h = 4 A P w D_h = \frac{4A}{P_w} D h ​ = P w ​ 4 A ​

μ \mu μ is dynamic viscosity ( Pa ⋅ s \text{Pa}\cdot\text{s} Pa ⋅ s ), ν \nu ν is kinematic viscosity ( m 2 / s \text{m}^2/\text{s} m 2 / s )

Critical Reynolds Numbers in Engineering Geometry:

Flow Configuration Laminar Regime Transition Regime Turbulent Regime

Internal Circular Pipe Flow R e < 2000 Re < 2000 R e < 2000 2000 ≤ R e ≤ 4000 2000 \le Re \le 4000 2000 ≤ R e ≤ 4000 R e > 4000 Re > 4000 R e > 4000

Flow between Parallel Plates R e < 1000 Re < 1000 R e < 1000 1000 ≤ R e ≤ 2000 1000 \le Re \le 2000 1000 ≤ R e ≤ 2000 R e > 2000 Re > 2000 R e > 2000

Flow over Flat Plate (Boundary Layer) R e x < 5 × 10 5 Re_x < 5\times 10^5 R e x ​ < 5 × 1 0 5 5 × 10 5 ≤ R e x ≤ 10 6 5\times 10^5 \le Re_x \le 10^6 5 × 1 0 5 ≤ R e x ​ ≤ 1 0 6 R e x > 5 × 10 5 − 10 6 Re_x > 5\times 10^5 - 10^6 R e x ​ > 5 × 1 0 5 − 1 0 6

Flow through Packed Pebble Beds R e < 1 − 10 Re < 1 - 10 R e < 1 − 10 10 ≤ R e ≤ 100 10 \le Re \le 100 10 ≤ R e ≤ 100 R e > 100 Re > 100 R e > 100

2. Hagen-Poiseuille Laminar Flow in Circular Pipes

For steady, fully developed, incompressible laminar flow through a straight horizontal circular pipe of radius R R R and diameter D = 2 R D = 2R D = 2 R : Pipe Centerline (r = 0, u = u_max, tau = 0)

  • --------------------------------------------------------
  • r ^ Parabolic Velocity Profile u(r)
  • | /-------------------\
  • | / \
  • | / \
  • +--------+-------------------------+-----------------> x
  • | \ /
  • | \ /
  • v \-------------------/
  • --------------------------------------------------------
  • Pipe Wall (r = R, u = 0, tau = tau_w = max)
  • 2.1 Shear Stress Distribution ( τ ( r ) \tau(r) τ ( r ) )

Considering a coaxial cylindrical fluid element of radius r r r and length d x dx d x , force equilibrium yields: τ ( r ) = − r 2 ( d P d x ) = τ w ( r R ) \tau(r) = -\frac{r}{2} \left(\frac{dP}{dx}\right) = \tau_w \left(\frac{r}{R}\right) τ ( r ) = − 2 r ​ ( d x d P ​ ) = τ w ​ ( R r ​ )

Linear Distribution: τ = 0 \tau = 0 τ = 0 at pipe centerline ( r = 0 r = 0 r = 0 ), and reaches maximum value τ w \tau_w τ w ​ at the wall ( r = R r = R r = R ): τ w = − R 2 ( d P d x ) = Δ P ⋅ D 4 L \tau_w = -\frac{R}{2} \left(\frac{dP}{dx}\right) = \frac{\Delta P \cdot D}{4L} τ w ​ = − 2 R ​ ( d x d P ​ ) = 4 L Δ P ⋅ D ​

Note: The linear variation of shear stress across the pipe radius holds true for both laminar and turbulent flows because it is derived purely from static force equilibrium.

2.2 Parabolic Velocity Profile ( u ( r ) u(r) u ( r ) )

Using τ = − μ d u d r \tau = -\mu \frac{du}{dr} τ = − μ d r d u ​ and integrating with no-slip boundary condition u ( R ) = 0 u(R) = 0 u ( R ) = 0 : ν ( r ) = − 1 4 μ ( d P d x ) ( R 2 − r 2 ) = u max ⁡ ( 1 − r 2 R 2 ) \nu(r) = -\frac{1}{4\mu} \left(\frac{dP}{dx}\right) (R^2 - r^2) = u_{\max} \left(1 - \frac{r^2}{R^2}\right) ν ( r ) = − 4 μ 1 ​ ( d x d P ​ ) ( R 2 − r 2 ) = u m a x ​ ( 1 − R 2 r 2 ​ )

Maximum Velocity ( u max ⁡ u_{\max} u m a x ​ at r = 0 r = 0 r = 0 ): u max ⁡ = − R 2 4 μ ( d P d x ) = Δ P ⋅ R 2 4 μ L = Δ P ⋅ D 2 16 μ L u_{\max} = -\frac{R^2}{4\mu} \left(\frac{dP}{dx}\right) = \frac{\Delta P \cdot R^2}{4\mu L} = \frac{\Delta P \cdot D^2}{16\mu L} u m a x ​ = − 4 μ R 2 ​ ( d x d P ​ ) = 4 μL Δ P ⋅ R 2 ​ = 16 μL Δ P ⋅ D 2 ​

2.3 Mean / Average Velocity ( V avg V_{\text{avg}} V avg ​ or u ˉ \bar{u} u ˉ )

Integrating discharge Q = ∫ 0 R u ( r ) ⋅ 2 π r d r Q = \int_0^R u(r) \cdot 2\pi r \, dr Q = ∫ 0 R ​ u ( r ) ⋅ 2 π r d r and dividing by area A = π R 2 A = \pi R^2 A = π R 2 : V avg = u max ⁡ 2 = − R 2 8 μ ( d P d x ) = Δ P ⋅ D 2 32 μ L V_{\text{avg}} = \frac{u_{\max}}{2} = -\frac{R^2}{8\mu}\left(\frac{dP}{dx}\right) = \frac{\Delta P \cdot D^2}{32\mu L} V avg ​ = 2 u m a x ​ ​ = − 8 μ R 2 ​ ( d x d P ​ ) = 32 μL Δ P ⋅ D 2 ​

Core GATE / PSU Relation: In fully developed laminar pipe flow, u max ⁡ = 2 × V avg u_{\max} = 2 \times V_{\text{avg}} u m a x ​ = 2 × V avg ​ .

Radial Position where Local Velocity equals Average Velocity: u ( r ) = V avg = u max ⁡ 2 ⟹ u max ⁡ ( 1 − r 2 R 2 ) = u max ⁡ 2 u(r) = V_{\text{avg}} = \frac{u_{\max}}{2} \implies u_{\max}\left(1 - \frac{r^2}{R^2}\right) = \frac{u_{\max}}{2} u ( r ) = V avg ​ = 2 u m a x ​ ​ ⟹ u m a x ​ ( 1 − R 2 r 2 ​ ) = 2 u m a x ​ ​ 1 − r 2 R 2 = 0.5 ⟹ r 2 R 2 = 0.5 ⟹ r = R 2 ≈ 0.707 R 1 - \frac{r^2}{R^2} = 0.5 \implies \frac{r^2}{R^2} = 0.5 \implies r = \frac{R}{\sqrt{2}} \approx 0.707 R 1 − R 2 r 2 ​ = 0.5 ⟹ R 2 r 2 ​ = 0.5 ⟹ r = 2 ​ R ​ ≈ 0.707 R

2.4 Hagen-Poiseuille Pressure Drop and Discharge Equations Δ P = P 1 − P 2 = 32 μ V avg L D 2 = 128 μ Q L π D 4 \Delta P = P_1 - P_2 = \frac{32 \mu V_{\text{avg}} L}{D^2} = \frac{128 \mu Q L}{\pi D^4} Δ P = P 1 ​ − P 2 ​ = D 2 32 μ V avg ​ L ​ = π D 4 128 μ Q L ​ Q = π Δ P D 4 128 μ L Q = \frac{\pi \Delta P D^4}{128 \mu L} Q = 128 μL π Δ P D 4 ​

Kinetic Energy and Momentum Correction Factors:

Kinetic Energy Correction Factor ( α = 1 A ∫ ( u / V ) 3 d A \alpha = \frac{1}{A}\int (u/V)^3 dA α = A 1 ​ ∫ ( u / V ) 3 d A ):

  • For Laminar circular pipe flow: α = 2.0 \alpha = 2.0 α = 2.0
  • For Turbulent circular pipe flow: α ≈ 1.03 − 1.06 \alpha \approx 1.03 - 1.06 α ≈ 1.03 − 1.06

Momentum Correction Factor ( β = 1 A ∫ ( u / V ) 2 d A \beta = \frac{1}{A}\int (u/V)^2 dA β = A 1 ​ ∫ ( u / V ) 2 d A ):

  • For Laminar circular pipe flow: β = 4 3 ≈ 1.33 \beta = \frac{4}{3} \approx 1.33 β = 3 4 ​ ≈ 1.33
  • For Turbulent circular pipe flow: β ≈ 1.01 − 1.03 \beta \approx 1.01 - 1.03 β ≈ 1.01 − 1.03
  • 3. Darcy-Weisbach Equation & Pipe Friction Factors

The fundamental equation for major frictional head loss h f h_f h f ​ in any conduit is the Darcy-Weisbach Formula : h f = f L V 2 2 g D = 4 f ′ L V 2 2 g D = f L Q 2 12.1 D 5 h_f = \frac{f L V^2}{2g D} = \frac{4 f' L V^2}{2g D} = \frac{f L Q^2}{12.1 D^5} h f ​ = 2 g D f L V 2 ​ = 2 g D 4 f ′ L V 2 ​ = 12.1 D 5 f L Q 2 ​

Where:

  • f f f is the dimensionless Darcy Friction Factor (or Darcy-Weisbach friction coefficient)
  • f ′ f' f ′ is the Fanning Friction Factor ( f = 4 f ′ f = 4f' f = 4 f ′ )
  • 3.1 Friction Factor in Laminar Flow

Equating Darcy-Weisbach loss h f = Δ P ρ g = 32 μ V L ρ g D 2 h_f = \frac{\Delta P}{\rho g} = \frac{32 \mu V L}{\rho g D^2} h f ​ = ρ g Δ P ​ = ρ g D 2 32 μ V L ​ to f L V 2 2 g D \frac{f L V^2}{2g D} 2 g D f L V 2 ​ : f L V 2 2 g D = 32 μ V L ρ g D 2 ⟹ f = 64 μ ρ V D = 64 R e \frac{f L V^2}{2g D} = \frac{32 \mu V L}{\rho g D^2} \implies f = \frac{64 \mu}{\rho V D} = \frac{64}{Re} 2 g D f L V 2 ​ = ρ g D 2 32 μ V L ​ ⟹ f = ρ V D 64 μ ​ = R e 64 ​ f laminar = 64 R e , f Fanning ′ = 16 R e f_{\text{laminar}} = \frac{64}{Re}, \quad f'_{\text{Fanning}} = \frac{16}{Re} f laminar ​ = R e 64 ​ , f Fanning ′ ​ = R e 16 ​

Critical Note: In laminar flow, the friction factor depends only on Reynolds number and is completely independent of pipe relative surface roughness ϵ / D \epsilon/D ϵ / D .

3.2 Friction Factor in Turbulent Flow (Moody Chart)

Smooth Pipes ( 4000 < R e < 10 5 4000 < Re < 10^5 4000 < R e < 1 0 5 - Blasius Formula): f = 0.3164 R e 1 / 4 = 0.3164 R e 0.25 f = \frac{0.3164}{Re^{1/4}} = \frac{0.3164}{Re^{0.25}} f = R e 1/4 0.3164 ​ = R e 0.25 0.3164 ​

Rough Pipes in Fully Rough / Wholly Turbulent Regime: Viscous sublayer thickness δ v ≈ 11.6 ν u τ \delta_v \approx \frac{11.6\nu}{u_{\tau}} δ v ​ ≈ u τ ​ 11.6 ν ​ becomes much smaller than roughness asperities k s k_s k s ​ . Friction factor becomes independent of R e Re R e and depends purely on relative roughness (Nikuradse equation): 1 f = 2.0 log ⁡ 10 ( D 2 ϵ ) + 1.74 \frac{1}{\sqrt{f}} = 2.0 \log_{10}\left(\frac{D}{2\epsilon}\right) + 1.74 f ​ 1 ​ = 2.0 lo g 10 ​ ( 2 ϵ D ​ ) + 1.74

4. Minor Losses in Pipe Systems

Minor losses occur due to local flow disturbances, geometry transitions, valves, and fittings: h L = k L V 2 2 g h_L = k_L \frac{V^2}{2g} h L ​ = k L ​ 2 g V 2 ​ 1. Sudden Enlargement: 2. Sudden Contraction:

  • V_1 V_2 V_1 V_2
  • =========\ ====== ====== /=======
  • \ / \ Vena /
  • Recirc. \-------------/ \-Contracta--/
  • Eddies Recirc. Eddies
  • 4.1 Sudden Expansion (Borda-Carnot Formula)

Due to momentum deceleration and eddy dissipation in the corners: h exp = ( V 1 − V 2 ) 2 2 g = V 1 2 2 g ( 1 − A 1 A 2 ) 2 h_{\text{exp}} = \frac{(V_1 - V_2)^2}{2g} = \frac{V_1^2}{2g}\left(1 - \frac{A_1}{A_2}\right)^2 h exp ​ = 2 g ( V 1 ​ − V 2 ​ ) 2 ​ = 2 g V 1 2 ​ ​ ( 1 − A 2 ​ A 1 ​ ​ ) 2

Pipe Exit Loss (Discharge into large sump/reservoir where A 2 → ∞ , V 2 = 0 A_2 \to \infty, V_2 = 0 A 2 ​ → ∞ , V 2 ​ = 0 ): h exit = V 1 2 2 g h_{\text{exit}} = \frac{V_1^2}{2g} h exit ​ = 2 g V 1 2 ​ ​

4.2 Sudden Contraction

Flow converges to a vena contracta ( A c = C c A 2 A_c = C_c A_2 A c ​ = C c ​ A 2 ​ ) before expanding to fill the smaller pipe: h c = ( V c − V 2 ) 2 2 g = ( 1 C c − 1 ) 2 V 2 2 2 g = k c V 2 2 2 g h_c = \frac{(V_c - V_2)^2}{2g} = \left(\frac{1}{C_c} - 1\right)^2 \frac{V_2^2}{2g} = k_c \frac{V_2^2}{2g} h c ​ = 2 g ( V c ​ − V 2 ​ ) 2 ​ = ( C c ​ 1 ​ − 1 ) 2 2 g V 2 2 ​ ​ = k c ​ 2 g V 2 2 ​ ​

For typical water flow with C c ≈ 0.62 C_c \approx 0.62 C c ​ ≈ 0.62 : k c = ( 1 0.62 − 1 ) 2 ≈ ( 0.613 ) 2 ≈ 0.375 − 0.50 ⟹ h c ≈ 0.5 V 2 2 2 g k_c = \left(\frac{1}{0.62} - 1\right)^2 \approx (0.613)^2 \approx 0.375 - 0.50 \implies h_c \approx 0.5 \frac{V_2^2}{2g} k c ​ = ( 0.62 1 ​ − 1 ) 2 ≈ ( 0.613 ) 2 ≈ 0.375 − 0.50 ⟹ h c ​ ≈ 0.5 2 g V 2 2 ​ ​

4.3 Summary of Minor Loss Coefficients:

Fitting / Discontinuity Minor Loss Coefficient ( k L k_L k L ​ ) Head Loss Formula

Pipe Entrance (Bell-Mouthed / Streamlined) k L ≈ 0.04 − 0.05 k_L \approx 0.04 - 0.05 k L ​ ≈ 0.04 − 0.05 h i = 0.04 V 2 2 g h_i = 0.04 \frac{V^2}{2g} h i ​ = 0.04 2 g V 2 ​

Pipe Entrance (Sharp-Edged / Flush) k L = 0.50 k_L = 0.50 k L ​ = 0.50 h i = 0.50 V 2 2 g h_i = 0.50 \frac{V^2}{2g} h i ​ = 0.50 2 g V 2 ​

Pipe Entrance (Re-entrant / Borda Tube) k L = 0.80 − 1.00 k_L = 0.80 - 1.00 k L ​ = 0.80 − 1.00 h i = 0.80 V 2 2 g h_i = 0.80 \frac{V^2}{2g} h i ​ = 0.80 2 g V 2 ​

Sudden Contraction k c ≈ 0.50 k_c \approx 0.50 k c ​ ≈ 0.50 h c = 0.50 V 2 2 2 g h_c = 0.50 \frac{V_2^2}{2g} h c ​ = 0.50 2 g V 2 2 ​ ​

Sudden Enlargement k exp = ( 1 − A 1 A 2 ) 2 k_{\text{exp}} = \left(1 - \frac{A_1}{A_2}\right)^2 k exp ​ = ( 1 − A 2 ​ A 1 ​ ​ ) 2 h exp = ( V 1 − V 2 ) 2 2 g h_{\text{exp}} = \frac{(V_1 - V_2)^2}{2g} h exp ​ = 2 g ( V 1 ​ − V 2 ​ ) 2 ​

Pipe Exit to Reservoir k o = 1.00 k_o = 1.00 k o ​ = 1.00 h o = 1.0 V 2 2 g h_o = 1.0 \frac{V^2}{2g} h o ​ = 1.0 2 g V 2 ​

90 ∘ 90^{\circ} 9 0 ∘ Standard Elbow k L ≈ 0.90 − 1.10 k_L \approx 0.90 - 1.10 k L ​ ≈ 0.90 − 1.10 h b = 0.90 V 2 2 g h_b = 0.90 \frac{V^2}{2g} h b ​ = 0.90 2 g V 2 ​

Fully Open Gate Valve k L ≈ 0.15 − 0.20 k_L \approx 0.15 - 0.20 k L ​ ≈ 0.15 − 0.20 h v = 0.20 V 2 2 g h_v = 0.20 \frac{V^2}{2g} h v ​ = 0.20 2 g V 2 ​

Fully Open Globe Valve k L ≈ 10.0 k_L \approx 10.0 k L ​ ≈ 10.0 h v = 10.0 V 2 2 g h_v = 10.0 \frac{V^2}{2g} h v ​ = 10.0 2 g V 2 ​

  • 5. Pipe Networks: Series, Parallel, and Siphons
  • 5.1 Pipes in Series & Dupuit's Equivalent Pipe Equation

When pipes of different lengths ( L 1 , L 2 , … L_1, L_2, \dots L 1 ​ , L 2 ​ , … ) and diameters ( D 1 , D 2 , … D_1, D_2, \dots D 1 ​ , D 2 ​ , … ) are connected in series:

Discharge is constant: Q = Q 1 = Q 2 = Q 3 = … Q = Q_1 = Q_2 = Q_3 = \dots Q = Q 1 ​ = Q 2 ​ = Q 3 ​ = …

Total friction head loss is additive: H L = h f 1 + h f 2 + h f 3 + … H_L = h_{f1} + h_{f2} + h_{f3} + \dots H L ​ = h f 1 ​ + h f 2 ​ + h f 3 ​ + …

Using Darcy-Weisbach h f = f L Q 2 12.1 D 5 h_f = \frac{f L Q^2}{12.1 D^5} h f ​ = 12.1 D 5 f L Q 2 ​ and assuming a uniform friction factor f f f : f L eq Q 2 12.1 D eq 5 = f L 1 Q 2 12.1 D 1 5 + f L 2 Q 2 12.1 D 2 5 + f L 3 Q 2 12.1 D 3 5 + … \frac{f L_{\text{eq}} Q^2}{12.1 D_{\text{eq}}^5} = \frac{f L_1 Q^2}{12.1 D_1^5} + \frac{f L_2 Q^2}{12.1 D_2^5} + \frac{f L_3 Q^2}{12.1 D_3^5} + \dots 12.1 D eq 5 ​ f L eq ​ Q 2 ​ = 12.1 D 1 5 ​ f L 1 ​ Q 2 ​ + 12.1 D 2 5 ​ f L 2 ​ Q 2 ​ + 12.1 D 3 5 ​ f L 3 ​ Q 2 ​ + … L eq D eq 5 = L 1 D 1 5 + L 2 D 2 5 + L 3 D 3 5 + ⋯ = ∑ i = 1 n L i D i 5 \frac{L_{\text{eq}}}{D_{\text{eq}}^5} = \frac{L_1}{D_1^5} + \frac{L_2}{D_2^5} + \frac{L_3}{D_3^5} + \dots = \sum_{i=1}^n \frac{L_i}{D_i^5} D eq 5 ​ L eq ​ ​ = D 1 5 ​ L 1 ​ ​ + D 2 5 ​ L 2 ​ ​ + D 3 5 ​ L 3 ​ ​ + ⋯ = i = 1 ∑ n ​ D i 5 ​ L i ​ ​

This is Dupuit's Equation for equivalent pipelines.

5.2 Pipes in Parallel

When a main pipe branches into two or more parallel lines that rejoin downstream:

Head loss across each parallel branch is identical: h f 1 = h f 2 = h f 3 = ⋯ = h f , total h_{f1} = h_{f2} = h_{f3} = \dots = h_{f,\text{total}} h f 1 ​ = h f 2 ​ = h f 3 ​ = ⋯ = h f , total ​ f 1 L 1 Q 1 2 12.1 D 1 5 = f 2 L 2 Q 2 2 12.1 D 2 5 \frac{f_1 L_1 Q_1^2}{12.1 D_1^5} = \frac{f_2 L_2 Q_2^2}{12.1 D_2^5} 12.1 D 1 5 ​ f 1 ​ L 1 ​ Q 1 2 ​ ​ = 12.1 D 2 5 ​ f 2 ​ L 2 ​ Q 2 2 ​ ​

Total discharge is the sum of branch flows: Q total = Q 1 + Q 2 + Q 3 + … Q_{\text{total}} = Q_1 + Q_2 + Q_3 + \dots Q total ​ = Q 1 ​ + Q 2 ​ + Q 3 ​ + …

5.3 Hydraulic Gradient Line (HGL) and Total Energy Line (TEL) TEL (Total Energy Line = P/gamma + V^2/2g + z) -- Slopes downward in flow direction

  • \------------------------------------------------------\
  • \ V^2/2g (Dynamic Velocity Head) \
  • \------------------------------------------------------\ HGL (P/gamma + z)
  • \ \
  • \ Pipe Conduit \
  • =================================================================
  • Datum (z = 0)

Total Energy Line (TEL): Graphical representation of the total head ( H = P γ + V 2 2 g + z H = \frac{P}{\gamma} + \frac{V^2}{2g} + z H = γ P ​ + 2 g V 2 ​ + z ) along the pipeline. In real fluid flow without energy input (pumps), TEL must always slope downward in the direction of flow due to continuous frictional dissipation.

Hydraulic Gradient Line (HGL): Graphical representation of piezometric head ( h piezo = P γ + z h_{\text{piezo}} = \frac{P}{\gamma} + z h piezo ​ = γ P ​ + z ).

Vertical Separation: The vertical distance between TEL and HGL at any point is identically equal to the velocity head V 2 2 g \frac{V^2}{2g} 2 g V 2 ​ .

Siphon and Vacuum Risk: If the pipeline profile rises above the HGL, P γ \frac{P}{\gamma} γ P ​ becomes negative (gauge vacuum). In water pipelines, if the absolute pressure drops below the saturation vapor pressure ( P v ≈ 2.34 kPa P_v \approx 2.34\text{ kPa} P v ​ ≈ 2.34 kPa abs at 20 ∘ C ⟹ − 7.5 to − 7.7 m of water gauge 20^{\circ}\text{C} \implies -7.5\text{ to } -7.7\text{ m of water gauge} 2 0 ∘ C ⟹ − 7.5 to − 7.7 m of water gauge ), cavitation and vapor lock occur, breaking the siphon action.

6. Prandtl's Boundary Layer Theory

Introduced by Ludwig Prandtl (1904), boundary layer theory divides high Reynolds number flow around a body into two domains:

Thin Boundary Layer Region: A very thin layer adjacent to solid boundaries where velocity gradients ∂ u ∂ y \frac{\partial u}{\partial y} ∂ y ∂ u ​ are large, and viscous shear stresses cannot be neglected.

Outer Potential Flow Region: Outside the boundary layer, velocity gradients are near zero; fluid can be treated as frictionless/inviscid and irrotational (governed by Euler/Bernoulli equations). U_inf (Free Stream Velocity)

--------------------------------------------->

  • y ^ delta(x) Boundary Layer Thickness
  • | .-'''''''''''''''''''''-. Outer Inviscid Flow

| .' `.

  • | / \ (u = 0.99 U_inf)
  • | / Boundary Layer (Viscous) \
  • +----+---------------------------------+-------------> x
  • Leading Edge (x = 0) Plate Surface (y = 0, u = 0)
  • 6.1 Characteristic Boundary Layer Thickness Parameters

Nominal Boundary Layer Thickness ( δ \delta δ or δ 99 \delta_{99} δ 99 ​ ): The normal distance from the surface where local velocity u ( y ) u(y) u ( y ) reaches 99 % 99\% 99% of the free stream velocity ( u = 0.99 U ∞ u = 0.99 U_{\infty} u = 0.99 U ∞ ​ ).

Displacement Thickness ( δ ∗ \delta^* δ ∗ ): The distance by which the solid boundary must be shifted outward to compensate for the reduction in mass flow rate caused by boundary layer friction: δ ∗ = ∫ 0 δ ( 1 − u U ∞ ) d y \delta^* = \int_0^\delta \left(1 - \frac{u}{U_{\infty}}\right) dy δ ∗ = ∫ 0 δ ​ ( 1 − U ∞ ​ u ​ ) d y

Momentum Thickness ( θ \theta θ ): The distance by which the boundary must be shifted to compensate for the loss of momentum flux in the boundary layer: θ = ∫ 0 δ u U ∞ ( 1 − u U ∞ ) d y \theta = \int_0^\delta \frac{u}{U_{\infty}}\left(1 - \frac{u}{U_{\infty}}\right) dy θ = ∫ 0 δ ​ U ∞ ​ u ​ ( 1 − U ∞ ​ u ​ ) d y

Energy Thickness ( δ ∗ ∗ \delta^{**} δ ∗∗ ): The distance compensating for the kinetic energy deficit: δ ∗ ∗ = ∫ 0 δ u U ∞ ( 1 − u 2 U ∞ 2 ) d y \delta^{**} = \int_0^\delta \frac{u}{U_{\infty}}\left(1 - \frac{u^2}{U_{\infty}^2}\right) dy δ ∗∗ = ∫ 0 δ ​ U ∞ ​ u ​ ( 1 − U ∞ 2 ​ u 2 ​ ) d y

Shape Factor ( H H H ): Dimensionless ratio of displacement thickness to momentum thickness: H = δ ∗ θ H = \frac{\delta^*}{\theta} H = θ δ ∗ ​

For Blasius laminar boundary layer: H = 1.72 0.664 ≈ 2.59 H = \frac{1.72}{0.664} \approx 2.59 H = 0.664 1.72 ​ ≈ 2.59

  • For turbulent boundary layer ( 1 / 7 th 1/7\text{th} 1/7 th power law): H ≈ 1.286 H \approx 1.286 H ≈ 1.286
  • 6.2 Blasius Exact Solution for Laminar Boundary Layer on Flat Plate

For a smooth flat plate of length L L L parallel to uniform flow U ∞ U_{\infty} U ∞ ​ ( R e x = ρ U ∞ x μ < 5 × 10 5 Re_x = \frac{\rho U_{\infty} x}{\mu} < 5\times 10^5 R e x ​ = μ ρ U ∞ ​ x ​ < 5 × 1 0 5 ): δ x = 5.0 R e x \frac{\delta}{x} = \frac{5.0}{\sqrt{Re_x}} x δ ​ = R e x ​ ​ 5.0 ​ δ ∗ x = 1.72 R e x , θ x = 0.664 R e x \frac{\delta^*}{x} = \frac{1.72}{\sqrt{Re_x}}, \quad \frac{\theta}{x} = \frac{0.664}{\sqrt{Re_x}} x δ ∗ ​ = R e x ​ ​ 1.72 ​ , x θ ​ = R e x ​ ​ 0.664 ​

Local Skin Friction Coefficient ( C f x C_{fx} C f x ​ ): C f x = τ w 1 2 ρ U ∞ 2 = 0.664 R e x C_{fx} = \frac{\tau_w}{\frac{1}{2}\rho U_{\infty}^2} = \frac{0.664}{\sqrt{Re_x}} C f x ​ = 2 1 ​ ρ U ∞ 2 ​ τ w ​ ​ = R e x ​ ​ 0.664 ​

Average Drag Coefficient ( C D C_D C D ​ or C ˉ f \bar{C}_f C ˉ f ​ over total plate length L L L ): C D = 1 L ∫ 0 L C f x d x = 1.328 R e L = 2 × C f ( x = L ) C_D = \frac{1}{L}\int_0^L C_{fx} \, dx = \frac{1.328}{\sqrt{Re_L}} = 2 \times C_{f(x=L)} C D ​ = L 1 ​ ∫ 0 L ​ C f x ​ d x = R e L ​ ​ 1.328 ​ = 2 × C f ( x = L ) ​

Total Skin Friction Drag Force on One Side of Plate ( F D F_D F D ​ ): F D = C D ⋅ ( 1 2 ρ U ∞ 2 ) ⋅ ( b ⋅ L ) = 1.328 R e L ( 1 2 ρ U ∞ 2 ) ( b L ) F_D = C_D \cdot \left(\frac{1}{2}\rho U_{\infty}^2\right) \cdot (b \cdot L) = \frac{1.328}{\sqrt{Re_L}} \left(\frac{1}{2}\rho U_{\infty}^2\right) (b L) F D ​ = C D ​ ⋅ ( 2 1 ​ ρ U ∞ 2 ​ ) ⋅ ( b ⋅ L ) = R e L ​ ​ 1.328 ​ ( 2 1 ​ ρ U ∞ 2 ​ ) ( b L )

7. Boundary Layer Separation & Drag Forces Accelerating Flow (dP/dx < 0): Decelerating Flow (dP/dx > 0):

Favorable Gradient Adverse Gradient -> SEPARATION!

Boundary Layer Attached (du/dy)_wall = 0 at separation point S

  • ----> -----> Recirculation
  • ------> (Attached) ------> S / Backflow
  • --------> -----> * (~~~~~~~~~~~)
  • ========================= ============================
  • 7.1 Boundary Layer Separation Mechanics

Separation occurs when fluid layers adjacent to the wall lose kinetic energy due to wall shear friction and are forced to advance against an adverse pressure gradient ( d P d x > 0 \frac{dP}{dx} > 0 d x d P ​ > 0 , decelerating flow).

Wall Velocity Gradient Criteria at y = 0 y = 0 y = 0 :

( ∂ u ∂ y ) y = 0 > 0 \left(\frac{\partial u}{\partial y}\right)_{y=0} > 0 ( ∂ y ∂ u ​ ) y = 0 ​ > 0 : Flow remains firmly attached ; shear stress τ w > 0 \tau_w > 0 τ w ​ > 0 .

( ∂ u ∂ y ) y = 0 = 0 \left(\frac{\partial u}{\partial y}\right)_{y=0} = 0 ( ∂ y ∂ u ​ ) y = 0 ​ = 0 : Point of Imminent Separation ; wall shear stress drops to zero ( τ w = 0 \tau_w = 0 τ w ​ = 0 ).

( ∂ u ∂ y ) y = 0 < 0 \left(\frac{\partial u}{\partial y}\right)_{y=0} < 0 ( ∂ y ∂ u ​ ) y = 0 ​ < 0 : Flow has separated ; backflow, vortices, and wake zone develop.

7.2 Drag and Lift on Submerged Bodies

Total Drag ( F D F_D F D ​ ): Component of total fluid dynamic force parallel to free-stream velocity: F D = F D , friction ⏟ Skin Friction Drag + F D , pressure ⏟ Form / Pressure Drag = 1 2 C D ρ A U ∞ 2 F_D = \underbrace{F_{D,\text{friction}}}_{\text{Skin Friction Drag}} + \underbrace{F_{D,\text{pressure}}}_{\text{Form / Pressure Drag}} = \frac{1}{2} C_D \rho A U_{\infty}^2 F D ​ = Skin Friction Drag F D , friction ​ ​ ​ + Form / Pressure Drag F D , pressure ​ ​ ​ = 2 1 ​ C D ​ ρ A U ∞ 2 ​

Streamlined Body (e.g., Airfoil, Hydrofoil): Separation is delayed until the extreme trailing edge; Form Drag ≈ 10 % \approx 10\% ≈ 10% , Skin Friction Drag ≈ 90 % \approx 90\% ≈ 90% .

Bluff Body (e.g., Sphere, Cylinder, Mine Haul Truck): Early boundary layer separation creates a massive low-pressure wake; Form Drag ≈ 90 % \approx 90\% ≈ 90% , Skin Friction Drag ≈ 10 % \approx 10\% ≈ 10% .

  • 8. Worked Engineering Examples
  • Problem 1: Hagen-Poiseuille Viscous Mine Pipeline Flow

A lubricating oil of dynamic viscosity μ = 0.29 Pa ⋅ s = 0.29 N ⋅ s/m 2 \mu = 0.29\text{ Pa}\cdot\text{s} = 0.29\text{ N}\cdot\text{s/m}^2 μ = 0.29 Pa ⋅ s = 0.29 N ⋅ s/m 2 and relative density S = 0.90 S = 0.90 S = 0.90 ( ρ = 900 kg/m 3 \rho = 900\text{ kg/m}^3 ρ = 900 kg/m 3 ) is pumped through a horizontal steel pipe of internal diameter D = 100 mm = 0.10 m D = 100\text{ mm} = 0.10\text{ m} D = 100 mm = 0.10 m and length L = 500 m L = 500\text{ m} L = 500 m at a volumetric flow rate of Q = 0.015 m 3 / s Q = 0.015\text{ m}^3/\text{s} Q = 0.015 m 3 / s . Determine:

The Reynolds number and verify the flow regime.

The pressure drop ( Δ P \Delta P Δ P ) across the pipeline.

The maximum flow velocity ( u max ⁡ u_{\max} u m a x ​ ) and the wall shear stress ( τ w \tau_w τ w ​ ).

The theoretical pumping power required.

Solution:

Mean Flow Velocity ( V avg V_{\text{avg}} V avg ​ ) and Reynolds Number: A = π D 2 4 = π × ( 0.10 ) 2 4 = 0.007854 m 2 A = \frac{\pi D^2}{4} = \frac{\pi \times (0.10)^2}{4} = 0.007854\text{ m}^2 A = 4 π D 2 ​ = 4 π × ( 0.10 ) 2 ​ = 0.007854 m 2 V avg = Q A = 0.015 0.007854 = 1.910 m/s V_{\text{avg}} = \frac{Q}{A} = \frac{0.015}{0.007854} = 1.910\text{ m/s} V avg ​ = A Q ​ = 0.007854 0.015 ​ = 1.910 m/s R e = ρ V D μ = 900 × 1.910 × 0.10 0.29 = 171.9 0.29 = 592.76 Re = \frac{\rho V D}{\mu} = \frac{900 \times 1.910 \times 0.10}{0.29} = \frac{171.9}{0.29} = 592.76 R e = μ ρ V D ​ = 0.29 900 × 1.910 × 0.10 ​ = 0.29 171.9 ​ = 592.76 Since R e = 592.76 < 2000 Re = 592.76 < 2000 R e = 592.76 < 2000 , the flow is strictly in the laminar flow regime .

Pressure Drop ( Δ P \Delta P Δ P ): Δ P = 128 μ Q L π D 4 = 128 × 0.29 × 0.015 × 500 π × ( 0.10 ) 4 = 278.4 π × 10 − 4 = 886 , 175 Pa = 886.18 kPa \Delta P = \frac{128 \mu Q L}{\pi D^4} = \frac{128 \times 0.29 \times 0.015 \times 500}{\pi \times (0.10)^4} = \frac{278.4}{\pi \times 10^{-4}} = 886,175\text{ Pa} = 886.18\text{ kPa} Δ P = π D 4 128 μ Q L ​ = π × ( 0.10 ) 4 128 × 0.29 × 0.015 × 500 ​ = π × 1 0 − 4 278.4 ​ = 886 , 175 Pa = 886.18 kPa

Maximum Velocity ( u max ⁡ u_{\max} u m a x ​ ) and Wall Shear Stress ( τ w \tau_w τ w ​ ): u max ⁡ = 2 × V avg = 2 × 1.910 = 3.82 m/s u_{\max} = 2 \times V_{\text{avg}} = 2 \times 1.910 = 3.82\text{ m/s} u m a x ​ = 2 × V avg ​ = 2 × 1.910 = 3.82 m/s τ w = Δ P ⋅ D 4 L = 886175 × 0.10 4 × 500 = 88617.5 2000 = 44.31 N/m 2 = 44.31 Pa \tau_w = \frac{\Delta P \cdot D}{4L} = \frac{886175 \times 0.10}{4 \times 500} = \frac{88617.5}{2000} = 44.31\text{ N/m}^2 = 44.31\text{ Pa} τ w ​ = 4 L Δ P ⋅ D ​ = 4 × 500 886175 × 0.10 ​ = 2000 88617.5 ​ = 44.31 N/m 2 = 44.31 Pa

Pumping Power Required ( P pump P_{\text{pump}} P pump ​ ): P pump = Q ⋅ Δ P = 0.015 m 3 / s × 886 , 175 N/m 2 = 13 , 292.6 W = 13.29 kW P_{\text{pump}} = Q \cdot \Delta P = 0.015\text{ m}^3/\text{s} \times 886,175\text{ N/m}^2 = 13,292.6\text{ W} = 13.29\text{ kW} P pump ​ = Q ⋅ Δ P = 0.015 m 3 / s × 886 , 175 N/m 2 = 13 , 292.6 W = 13.29 kW

Problem 2: Dupuit's Equivalent Pipe Sizing

Three pipes in series connect two mine drainage reservoirs: Pipe 1 ( L 1 = 400 m , D 1 = 200 mm L_1 = 400\text{ m}, D_1 = 200\text{ mm} L 1 ​ = 400 m , D 1 ​ = 200 mm ), Pipe 2 ( L 2 = 300 m , D 2 = 150 mm L_2 = 300\text{ m}, D_2 = 150\text{ mm} L 2 ​ = 300 m , D 2 ​ = 150 mm ), and Pipe 3 ( L 3 = 200 m , D 3 = 100 mm L_3 = 200\text{ m}, D_3 = 100\text{ mm} L 3 ​ = 200 m , D 3 ​ = 100 mm ). Determine the equivalent length of a uniform pipe of diameter D eq = 200 mm D_{\text{eq}} = 200\text{ mm} D eq ​ = 200 mm .

Solution:

Applying Dupuit's Equation with D eq = D 1 = 0.20 m D_{\text{eq}} = D_1 = 0.20\text{ m} D eq ​ = D 1 ​ = 0.20 m : L eq = D eq 5 ( L 1 D 1 5 + L 2 D 2 5 + L 3 D 3 5 ) L_{\text{eq}} = D_{\text{eq}}^5 \left(\frac{L_1}{D_1^5} + \frac{L_2}{D_2^5} + \frac{L_3}{D_3^5}\right) L eq ​ = D eq 5 ​ ( D 1 5 ​ L 1 ​ ​ + D 2 5 ​ L 2 ​ ​ + D 3 5 ​ L 3 ​ ​ ) L eq = L 1 + L 2 ( D eq D 2 ) 5 + L 3 ( D eq D 3 ) 5 L_{\text{eq}} = L_1 + L_2\left(\frac{D_{\text{eq}}}{D_2}\right)^5 + L_3\left(\frac{D_{\text{eq}}}{D_3}\right)^5 L eq ​ = L 1 ​ + L 2 ​ ( D 2 ​ D eq ​ ​ ) 5 + L 3 ​ ( D 3 ​ D eq ​ ​ ) 5 D eq D 2 = 200 150 = 4 3 ⟹ ( 4 3 ) 5 = 1024 243 ≈ 4.214 \frac{D_{\text{eq}}}{D_2} = \frac{200}{150} = \frac{4}{3} \implies \left(\frac{4}{3}\right)^5 = \frac{1024}{243} \approx 4.214 D 2 ​ D eq ​ ​ = 150 200 ​ = 3 4 ​ ⟹ ( 3 4 ​ ) 5 = 243 1024 ​ ≈ 4.214 D eq D 3 = 200 100 = 2.0 ⟹ 2 5 = 32.0 \frac{D_{\text{eq}}}{D_3} = \frac{200}{100} = 2.0 \implies 2^5 = 32.0 D 3 ​ D eq ​ ​ = 100 200 ​ = 2.0 ⟹ 2 5 = 32.0 L eq = 400 + 300 ( 4.214 ) + 200 ( 32.0 ) = 400 + 1264.2 + 6400 = 8064.2 m L_{\text{eq}} = 400 + 300(4.214) + 200(32.0) = 400 + 1264.2 + 6400 = 8064.2\text{ m} L eq ​ = 400 + 300 ( 4.214 ) + 200 ( 32.0 ) = 400 + 1264.2 + 6400 = 8064.2 m

The compound pipeline is equivalent to a single 200 mm 200\text{ mm} 200 mm diameter pipe of length 8064.2 m 8064.2\text{ m} 8064.2 m .