Study guide

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins)

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins)

Key Takeaways Explain This Topic AI

Fourier's law defines conduction heat flux as q'' = -k*dT/dx, where thermal conductivity k follows k_solid > k_liquid > k_gas and generally decreases with temperature in pure metals due to electron-phonon scattering.

Thermal resistance networks linearize complex composite geometries: conduction resistance is R_th = L/(kA) for slabs, ln(r2/r1)/(2 pi k L) for cylinders, and (r2-r1)/(4 pi k r1*r2) for spheres, combined via 1/(UA) = sum(R_th).

Critical radius of insulation is r_cr = k/h for cylinders and 2k/h for spheres; adding insulation to a bare cylinder where r_o < r_cr increases total heat loss until r_o = r_cr, beyond which heat loss decreases.

Extended surfaces (fins) improve heat dissipation governed by d^2(theta)/dx^2 - m^2 theta = 0 with m = sqrt(hP/(k Ac)); fins are justified only when fin effectiveness epsilon_fin = sqrt(kP/(h*Ac))*tanh(mL) > 2, typically on the gas/air side where convective h is low.

Transient conduction is governed by the Biot number Bi = h Lc/k_solid; for Bi < 0.1, internal thermal gradients are negligible and the lumped capacitance model (T(t)-T_inf)/(T0-T_inf) = exp(-Bi Fo) = exp(-t/tau) applies with time constant tau = rho V c_p/(h*As).

Last updated: August 2026

Steady & Unsteady Conduction, Extended Surfaces (Fins)

Conduction is the mode of heat transfer in which energy is transferred from more energetic particles of a substance to adjacent, less energetic particles as a result of microscopic interactions: atomic lattice vibrations (phonons) and molecular collisions, alongside free electron transport in conducting media. In mining engineering operations—ranging from the thermal management of high-power continuous miner electric motors, dragline brake assemblies, and underground transformer vaults to steam pipeline insulation in thermal power co-generation units—mastery of steady and transient conduction is vital for equipment reliability and safety.

1. Fourier's Law of Heat Conduction & Thermal Conductivity Mechanisms

Fourier's law is the phenomenological governing law of conductive heat transfer. It states that the time rate of heat transfer through a material is proportional to the negative gradient in temperature and to the area through which the heat flows at right angles to that gradient: q = − k A d T d x ⟹ q ′ ′ = q A = − k d T d x q = -k A \frac{dT}{dx} \quad \implies \quad q'' = \frac{q}{A} = -k \frac{dT}{dx} q = − k A d x d T ​ ⟹ q ′′ = A q ​ = − k d x d T ​

Where:

  • q = Heat transfer rate ( W ) q = \text{Heat transfer rate } (\text{W}) q = Heat transfer rate ( W )
  • q ′ ′ = Heat flux ( W/m 2 ) q'' = \text{Heat flux } (\text{W/m}^2) q ′′ = Heat flux ( W/m 2 )

k = Thermal conductivity of the material ( W/m ⋅ K ) k = \text{Thermal conductivity of the material } (\text{W/m}\cdot\text{K}) k = Thermal conductivity of the material ( W/m ⋅ K )

A = Cross-sectional area normal to heat flow ( m 2 ) A = \text{Cross-sectional area normal to heat flow } (\text{m}^2) A = Cross-sectional area normal to heat flow ( m 2 )

d T d x = Temperature gradient in the direction of heat flow ( K/m ) \frac{dT}{dx} = \text{Temperature gradient in the direction of heat flow } (\text{K/m}) d x d T ​ = Temperature gradient in the direction of heat flow ( K/m )

Note

The Negative Sign: The negative sign in Fourier's law is a physical requirement of the Second Law of Thermodynamics , ensuring that heat flows spontaneously down the temperature gradient from higher temperature to lower temperature (where d T / d x < 0 dT/dx < 0 d T / d x < 0 , making q > 0 q > 0 q > 0 ). +-----------------------------------------------------------------------------------------+

  • | FOURIER'S LAW & THERMAL RESISTANCE CONCEPT |
  • | |
  • | Higher Temp (T1) Lower Temp (T2) |
  • | +---------------------------------------------------+ |
  • | | ---> Heat Flux q'' = -k*(dT/dx) | |
  • | | | |
  • | Area A | Material Thermal Conductivity = k | Thickness L |
  • | | | |
  • | +---------------------------------------------------+ |
  • | x = 0 x = L |
  • | |
  • | Thermal Resistance Analogy: |
  • | [T1] o--------------------/\/\/\/\/\/--------------------o [T2] |
  • | R_th = L / (k*A) |
  • | Heat Flow: q = (T1 - T2) / R_th = Delta_T / R_th |
  • +-----------------------------------------------------------------------------------------+
  • Microscopic Mechanisms of Thermal Conductivity ( k k k )

Thermal conductivity varies across states of matter based on microscopic energy transport carriers: k = k e + k ph k = k_e + k_{\text{ph}} k = k e ​ + k ph ​

Where k e k_e k e ​ is the electronic contribution (free electron migration) and k ph k_{\text{ph}} k ph ​ is the lattice vibration contribution (phonons).

Pure Metals: Dominated by free electrons ( k e ≫ k ph k_e \gg k_{\text{ph}} k e ​ ≫ k ph ​ ). Pure copper ( k ≈ 386 W/m ⋅ K k \approx 386\text{ W/m}\cdot\text{K} k ≈ 386 W/m ⋅ K ) and aluminum ( k ≈ 205 W/m ⋅ K k \approx 205\text{ W/m}\cdot\text{K} k ≈ 205 W/m ⋅ K ) exhibit extremely high conductivity. Under the Wiedemann-Franz Law , the ratio of thermal conductivity to electrical conductivity ( σ e \sigma_e σ e ​ ) is proportional to absolute temperature: k σ e T = L 0 = 2.44 × 10 − 8 W ⋅ Ω / K 2 ( Lorentz Number ) \frac{k}{\sigma_e T} = L_0 = 2.44 \times 10^{-8} \ \text{W}\cdot\Omega/\text{K}^2 \quad (\text{Lorentz Number}) σ e ​ T k ​ = L 0 ​ = 2.44 × 1 0 − 8 W ⋅ Ω/ K 2 ( Lorentz Number )

Alloys: Impurity atoms and structural dislocations scatter free electrons, significantly depressing thermal conductivity (e.g., carbon steel k ≈ 45 W/m ⋅ K k \approx 45\text{ W/m}\cdot\text{K} k ≈ 45 W/m ⋅ K , austenitic stainless steel k ≈ 15 W/m ⋅ K k \approx 15\text{ W/m}\cdot\text{K} k ≈ 15 W/m ⋅ K ).

Non-Metallic Solids (Dielectrics): Heat conducts exclusively through lattice phonons ( k e ≈ 0 k_e \approx 0 k e ​ ≈ 0 ). In disordered structures (glass, refractory bricks), phonon scattering by amorphous boundaries yields low conductivity ( k ≈ 0.8 – 1.4 W/m ⋅ K k \approx 0.8\text{--}1.4\text{ W/m}\cdot\text{K} k ≈ 0.8 – 1.4 W/m ⋅ K ).

Liquids: Energy is transported by longitudinal acoustic molecular vibrations. In general, thermal conductivity in liquids decreases with increasing temperature, with water being a notable anomaly where k k k rises to a maximum near 130 ∘ C 130^{\circ}\text{C} 13 0 ∘ C before decreasing.

Gases: Governed by kinetic theory of gases: k = 1 3 ρ v ˉ λ c v ∝ T M k = \frac{1}{3} \rho \bar{v} \lambda c_v \propto \frac{\sqrt{T}}{\sqrt{M}} k = 3 1 ​ ρ v ˉ λ c v ​ ∝ M ​ T ​ ​ . Thermal conductivity in gases is independent of pressure across standard industrial operating ranges ( 0.01 – 10 bar 0.01\text{--}10\text{ bar} 0.01 – 10 bar ) and increases with T \sqrt{T} T ​ .

Material Class Typical Material Thermal Conductivity k ( W/m ⋅ K ) k\ (\text{W/m}\cdot\text{K}) k ( W/m ⋅ K ) Primary Carrier

  • Pure Metal Pure Copper / Silver 385 − 419 385 - 419 385 − 419 Free electrons ( k e k_e k e ​ )
  • Structural Metal Mild Steel (0.2% C) 45 − 50 45 - 50 45 − 50 Free electrons + Phonons

Refractory / Ceramic Fireclay Brick / Alumina 1.0 − 2.5 1.0 - 2.5 1.0 − 2.5 Lattice phonons ( k ph k_{\text{ph}} k ph ​ )

  • Liquid Water at 20 ∘ C 20^{\circ}\text{C} 2 0 ∘ C 0.60 0.60 0.60 Molecular collisions
  • Insulator / Gas Mineral Wool / Still Air 0.026 − 0.040 0.026 - 0.040 0.026 − 0.040 Molecular diffusion
  • 2. Three-Dimensional General Heat Conduction Equations

Applying the First Law of Thermodynamics to a differential control volume yields the general three-dimensional transient heat conduction equation with internal heat generation.

Cartesian Coordinates ( x , y , z ) (x, y, z) ( x , y , z ) ∂ ∂ x ( k ∂ T ∂ x ) + ∂ ∂ y ( k ∂ T ∂ y ) + ∂ ∂ z ( k ∂ T ∂ z ) + q ˙ g = ρ c p ∂ T ∂ t \frac{\partial}{\partial x}\left(k \frac{\partial T}{\partial x}\right) + \frac{\partial}{\partial y}\left(k \frac{\partial T}{\partial y}\right) + \frac{\partial}{\partial z}\left(k \frac{\partial T}{\partial z}\right) + \dot{q}_g = \rho c_p \frac{\partial T}{\partial t} ∂ x ∂ ​ ( k ∂ x ∂ T ​ ) + ∂ y ∂ ​ ( k ∂ y ∂ T ​ ) + ∂ z ∂ ​ ( k ∂ z ∂ T ​ ) + q ˙ ​ g ​ = ρ c p ​ ∂ t ∂ T ​

For a homogeneous, isotropic material with constant thermal conductivity ( k = const k = \text{const} k = const ): ∂ 2 T ∂ x 2 + ∂ 2 T ∂ y 2 + ∂ 2 T ∂ z 2 + q ˙ g k = 1 α ∂ T ∂ t ⟹ ∇ 2 T + q ˙ g k = 1 α ∂ T ∂ t \frac{\partial^2 T}{\partial x^2} + \frac{\partial^2 T}{\partial y^2} + \frac{\partial^2 T}{\partial z^2} + \frac{\dot{q}_g}{k} = \frac{1}{\alpha} \frac{\partial T}{\partial t} \quad \implies \quad \nabla^2 T + \frac{\dot{q}_g}{k} = \frac{1}{\alpha} \frac{\partial T}{\partial t} ∂ x 2 ∂ 2 T ​ + ∂ y 2 ∂ 2 T ​ + ∂ z 2 ∂ 2 T ​ + k q ˙ ​ g ​ ​ = α 1 ​ ∂ t ∂ T ​ ⟹ ∇ 2 T + k q ˙ ​ g ​ ​ = α 1 ​ ∂ t ∂ T ​

Where α = k ρ c p ( m 2 / s ) \alpha = \frac{k}{\rho c_p}\ (\text{m}^2/\text{s}) α = ρ c p ​ k ​ ( m 2 / s ) is the thermal diffusivity , quantifying a medium's ability to conduct thermal energy relative to its capacity to store thermal energy. +-----------------------------------------------------------------------------------------+

  • | SPECIAL FORMS OF CONDUCTION EQUATION |
  • | |
  • | 1. Fourier Equation: nabla^2 T = (1/alpha)*(dT/dt) (No heat gen, unsteady)|
  • | 2. Poisson Equation: nabla^2 T + (q_g_dot / k) = 0 (Steady, heat gen) |
  • | 3. Laplace Equation: nabla^2 T = 0 (Steady, no heat gen) |
  • +-----------------------------------------------------------------------------------------+

Cylindrical Coordinates ( r , ϕ , z ) (r, \phi, z) ( r , ϕ , z ) 1 r ∂ ∂ r ( r ∂ T ∂ r ) + 1 r 2 ∂ 2 T ∂ ϕ 2 + ∂ 2 T ∂ z 2 + q ˙ g k = 1 α ∂ T ∂ t \frac{1}{r} \frac{\partial}{\partial r}\left(r \frac{\partial T}{\partial r}\right) + \frac{1}{r^2} \frac{\partial^2 T}{\partial \phi^2} + \frac{\partial^2 T}{\partial z^2} + \frac{\dot{q}_g}{k} = \frac{1}{\alpha} \frac{\partial T}{\partial t} r 1 ​ ∂ r ∂ ​ ( r ∂ r ∂ T ​ ) + r 2 1 ​ ∂ ϕ 2 ∂ 2 T ​ + ∂ z 2 ∂ 2 T ​ + k q ˙ ​ g ​ ​ = α 1 ​ ∂ t ∂ T ​

Spherical Coordinates ( r , θ , ϕ ) (r, \theta, \phi) ( r , θ , ϕ ) 1 r 2 ∂ ∂ r ( r 2 ∂ T ∂ r ) + 1 r 2 sin ⁡ θ ∂ ∂ θ ( sin ⁡ θ ∂ T ∂ θ ) + 1 r 2 sin ⁡ 2 θ ∂ 2 T ∂ ϕ 2 + q ˙ g k = 1 α ∂ T ∂ t \frac{1}{r^2} \frac{\partial}{\partial r}\left(r^2 \frac{\partial T}{\partial r}\right) + \frac{1}{r^2 \sin\theta} \frac{\partial}{\partial \theta}\left(\sin\theta \frac{\partial T}{\partial \theta}\right) + \frac{1}{r^2 \sin^2\theta} \frac{\partial^2 T}{\partial \phi^2} + \frac{\dot{q}_g}{k} = \frac{1}{\alpha} \frac{\partial T}{\partial t} r 2 1 ​ ∂ r ∂ ​ ( r 2 ∂ r ∂ T ​ ) + r 2 sin θ 1 ​ ∂ θ ∂ ​ ( sin θ ∂ θ ∂ T ​ ) + r 2 sin 2 θ 1 ​ ∂ ϕ 2 ∂ 2 T ​ + k q ˙ ​ g ​ ​ = α 1 ​ ∂ t ∂ T ​

3. One-Dimensional Steady Conduction & Thermal Resistance Networks

Under steady-state conditions without internal heat generation, heat flow is governed by direct thermal circuit analogies ( q = Δ T / R th q = \Delta T / R_{\text{th}} q = Δ T / R th ​ ). +-----------------------------------------------------------------------------------------+

  • | THERMAL RESISTANCE FORMULAS BY GEOMETRY |
  • | |
  • | Geometry Conduction Resistance R_th Heat Rate q |
  • | -------------------- -------------------------------- ------------------------- |
  • | Plane Slab (Area A) R_th = L / (k*A) q = k*A*(T1 - T2) / L |
  • | Cylinder (Length L) R_th = ln(r2/r1) / (2*pi*k*L) q = 2*pi*k*L*Delta_T/ln(r2/r1|
  • | Sphere (Radii r1, r2) R_th = (r2 - r1) / (4*pi*k*r1*r2) q = 4*pi*k*r1*r2*Delta_T/(r2-r1|
  • | Convective Boundary R_conv = 1 / (h*A) q = h*A*(T_s - T_inf) |
  • +-----------------------------------------------------------------------------------------+
  • Composite Plane Walls in Series & Overall Heat Transfer Coefficient ( U U U )

For a composite wall consisting of multiple material layers 1 , 2 , … , n 1, 2, \dots, n 1 , 2 , … , n with convective fluid boundaries on both sides: +-----------------------------------------------------------------------------------------+

  • | COMPOSITE WALL THERMAL NETWORK CIRCUIT |
  • | |
  • | Fluid (T_inf1, h1) | Layer A (L_A, k_A) | Layer B (L_B, k_B) | Fluid (T_inf2, h2) |
  • | | | | |
  • | [T_inf1] o---/\/\/\/---[T1]---/\/\/\/---[T2]---/\/\/\/---[T3]---/\/\/\/---o [T_inf2] |
  • | R_conv1 R_cond,A R_cond,B R_conv2 |
  • | 1/(h1*A) L_A/(k_A*A) L_B/(k_B*A) 1/(h2*A) |

+-----------------------------------------------------------------------------------------+ R total = 1 h 1 A + ∑ i = 1 n L i k i A + 1 h 2 A R_{\text{total}} = \frac{1}{h_1 A} + \sum_{i=1}^n \frac{L_i}{k_i A} + \frac{1}{h_2 A} R total ​ = h 1 ​ A 1 ​ + i = 1 ∑ n ​ k i ​ A L i ​ ​ + h 2 ​ A 1 ​ q ˙ = T ∞ , 1 − T ∞ , 2 R total = U A ( T ∞ , 1 − T ∞ , 2 ) \dot{q} = \frac{T_{\infty,1} - T_{\infty,2}}{R_{\text{total}}} = U A (T_{\infty,1} - T_{\infty,2}) q ˙ ​ = R total ​ T ∞ , 1 ​ − T ∞ , 2 ​ ​ = U A ( T ∞ , 1 ​ − T ∞ , 2 ​ ) 1 U = 1 h 1 + ∑ i = 1 n L i k i + 1 h 2 ⟹ 1 U A = ∑ R th \frac{1}{U} = \frac{1}{h_1} + \sum_{i=1}^n \frac{L_i}{k_i} + \frac{1}{h_2} \quad \implies \quad \frac{1}{UA} = \sum R_{\text{th}} U 1 ​ = h 1 ​ 1 ​ + i = 1 ∑ n ​ k i ​ L i ​ ​ + h 2 ​ 1 ​ ⟹ U A 1 ​ = ∑ R th ​

Radial Systems: Composite Cylindrical Pipes

For an insulated industrial pipe of inner radius r 1 r_1 r 1 ​ , outer metal radius r 2 r_2 r 2 ​ , and insulation outer radius r 3 r_3 r 3 ​ , carrying hot fluid at T ∞ , i T_{\infty,i} T ∞ , i ​ ( h i h_i h i ​ ) surrounded by ambient air at T ∞ , o T_{\infty,o} T ∞ , o ​ ( h o h_o h o ​ ): R total = 1 2 π r 1 L h i + ln ⁡ ( r 2 / r 1 ) 2 π k pipe L + ln ⁡ ( r 3 / r 2 ) 2 π k ins L + 1 2 π r 3 L h o R_{\text{total}} = \frac{1}{2\pi r_1 L h_i} + \frac{\ln(r_2/r_1)}{2\pi k_{\text{pipe}} L} + \frac{\ln(r_3/r_2)}{2\pi k_{\text{ins}} L} + \frac{1}{2\pi r_3 L h_o} R total ​ = 2 π r 1 ​ L h i ​ 1 ​ + 2 π k pipe ​ L ln ( r 2 ​ / r 1 ​ ) ​ + 2 π k ins ​ L ln ( r 3 ​ / r 2 ​ ) ​ + 2 π r 3 ​ L h o ​ 1 ​ q ˙ = T ∞ , i − T ∞ , o R total = U i A i Δ T = U o A o Δ T \dot{q} = \frac{T_{\infty,i} - T_{\infty,o}}{R_{\text{total}}} = U_i A_i \Delta T = U_o A_o \Delta T q ˙ ​ = R total ​ T ∞ , i ​ − T ∞ , o ​ ​ = U i ​ A i ​ Δ T = U o ​ A o ​ Δ T

4. Critical Radius of Insulation

Adding insulation to a flat plane wall always increases conductive resistance ( L / k A L/kA L / k A ), thereby reducing heat transfer. However, adding insulation to a curved surface (cylinder or sphere) introduces two competing thermal effects:

Conduction Resistance: Increases logarithmically with insulation outer radius r r r ( R cond = ln ⁡ ( r / r 1 ) 2 π k L R_{\text{cond}} = \frac{\ln(r/r_1)}{2\pi k L} R cond ​ = 2 πk L l n ( r / r 1 ​ ) ​ ).

Convection Resistance: Decreases linearly with external surface area ( R conv = 1 2 π r L h o R_{\text{conv}} = \frac{1}{2\pi r L h_o} R conv ​ = 2 π r L h o ​ 1 ​ ). +-----------------------------------------------------------------------------------------+

  • | CRITICAL RADIUS OF INSULATION BEHAVIOR |
  • | |
  • | Thermal Resistance (R) |
  • | ^ |
  • | | / R_total = R_cond + R_conv |
  • | | / |
  • | | / \ |
  • | | / R_cond \ |
  • | | / \ |
  • | | / \_ R_conv |
  • | | / \_ |
  • | | / R_total MINIMUM \_ |
  • | | +------------*--------------------> (Max Heat Dissipation Rate) |
  • | | | | |
  • | +---+------------+--------------------------------------------> Outer Radius (r) |
  • | r_1 r_cr = k / h |
  • | |
  • | - If r_initial < r_cr: Adding insulation INCREASES heat transfer (ideal for cables). |
  • | - If r_initial > r_cr: Adding insulation DECREASES heat transfer (steam pipes). |
  • +-----------------------------------------------------------------------------------------+
  • Derivation for a Cylindrical Geometry

Expressing total thermal resistance per unit length R ′ R' R ′ as a function of insulation outer radius r r r : R ′ = ln ⁡ ( r / r 1 ) 2 π k + 1 2 π r h R' = \frac{\ln(r/r_1)}{2\pi k} + \frac{1}{2\pi r h} R ′ = 2 πk ln ( r / r 1 ​ ) ​ + 2 π r h 1 ​

Differentiating with respect to r r r and setting the derivative to zero to find the extremum: d R ′ d r = 1 2 π k r − 1 2 π h r 2 = 0 ⟹ 1 k = 1 h r \frac{dR'}{dr} = \frac{1}{2\pi k r} - \frac{1}{2\pi h r^2} = 0 \quad \implies \quad \frac{1}{k} = \frac{1}{h r} d r d R ′ ​ = 2 πk r 1 ​ − 2 πh r 2 1 ​ = 0 ⟹ k 1 ​ = h r 1 ​ r cr, cylinder = k h r_{\text{cr, cylinder}} = \frac{k}{h} r cr, cylinder ​ = h k ​

Evaluating the second derivative reveals d 2 R ′ d r 2 ∣ r = r cr > 0 \left.\frac{d^2 R'}{dr^2}\right|_{r=r_{\text{cr}}} > 0 d r 2 d 2 R ′ ​ ​ r = r cr ​ ​ > 0 , confirming that R ′ R' R ′ is at a mathematical minimum , and heat dissipation q q q is at a maximum .

Derivation for a Spherical Geometry R total = r − r 1 4 π k r r 1 + 1 4 π r 2 h ⟹ d R total d r = 1 4 π k r 2 − 2 4 π h r 3 = 0 R_{\text{total}} = \frac{r - r_1}{4\pi k r r_1} + \frac{1}{4\pi r^2 h} \quad \implies \quad \frac{dR_{\text{total}}}{dr} = \frac{1}{4\pi k r^2} - \frac{2}{4\pi h r^3} = 0 R total ​ = 4 πk r r 1 ​ r − r 1 ​ ​ + 4 π r 2 h 1 ​ ⟹ d r d R total ​ ​ = 4 πk r 2 1 ​ − 4 πh r 3 2 ​ = 0 r cr, sphere = 2 k h r_{\text{cr, sphere}} = \frac{2k}{h} r cr, sphere ​ = h 2 k ​

Important

Practical Design Rules:

Electrical Conductors & Cables: Keep outer radius r o ≤ r cr r_o \le r_{\text{cr}} r o ​ ≤ r cr ​ so that adding dielectric insulation maximizes heat dissipation, preventing copper core thermal runaway.

Steam & Process Fluid Pipelines: Ensure the bare pipe outer radius r 1 > r cr r_1 > r_{\text{cr}} r 1 ​ > r cr ​ , so that every millimeter of insulation added immediately reduces costly heat losses.

5. One-Dimensional Steady Conduction with Uniform Heat Generation

When thermal energy is generated uniformly throughout a solid volume at rate q ˙ g ( W/m 3 ) \dot{q}_g\ (\text{W/m}^3) q ˙ ​ g ​ ( W/m 3 ) (e.g., Joule heating I 2 R / V I^2 R/V I 2 R / V in electrical busbars, core nuclear reactions, or concrete curing exotherm), internal temperature distributions become parabolic. +-----------------------------------------------------------------------------------------+

  • | HEAT GENERATION: PLANE SLAB VS SOLID CYLINDER |
  • | |
  • | Plane Slab (-L <= x <= +L, Cooled to Tw): Solid Cylinder (0 <= r <= R, Cooled Tw): |
  • | |
  • | Centerline (x = 0) Centerline (r = 0) |
  • | T_max = T0 T_max = T0 |
  • | /\ /\ |
  • | / \ / \ |
  • | / \ / \ |
  • | Tw ______/ \______ Tw Tw ______/ \______ Tw |
  • | -L +L 0 R |
  • | |
  • | T(x) - Tw = (q_g*L^2 / 2k) * [1 - (x/L)^2] T(r) - Tw = (q_g*R^2 / 4k) * [1 - (r/R)^2]|
  • | T_max - Tw = q_g * L^2 / (2*k) T_max - Tw = q_g * R^2 / (4*k) |
  • +-----------------------------------------------------------------------------------------+

1. Plane Slab of Thickness 2 L 2L 2 L Cooled Symmetrically ( T ( x = ± L ) = T w T(x = \pm L) = T_w T ( x = ± L ) = T w ​ )

Starting from d 2 T d x 2 + q ˙ g k = 0 \frac{d^2 T}{dx^2} + \frac{\dot{q}_g}{k} = 0 d x 2 d 2 T ​ + k q ˙ ​ g ​ ​ = 0 , integrating twice and applying symmetry d T d x ∣ x = 0 = 0 \left.\frac{dT}{dx}\right|_{x=0} = 0 d x d T ​ ​ x = 0 ​ = 0 : T ( x ) = T w + q ˙ g L 2 2 k ( 1 − x 2 L 2 ) T(x) = T_w + \frac{\dot{q}_g L^2}{2k}\left(1 - \frac{x^2}{L^2}\right) T ( x ) = T w ​ + 2 k q ˙ ​ g ​ L 2 ​ ( 1 − L 2 x 2 ​ ) T max = T 0 = T w + q ˙ g L 2 2 k T_{\text{max}} = T_0 = T_w + \frac{\dot{q}_g L^2}{2k} T max ​ = T 0 ​ = T w ​ + 2 k q ˙ ​ g ​ L 2 ​

If one surface ( x = 0 x=0 x = 0 ) is perfectly insulated and the opposite face ( x = L x=L x = L ) is maintained at T w T_w T w ​ , the boundary conditions are identical, and maximum temperature occurs at the insulated wall with Δ T max = q ˙ g L 2 2 k \Delta T_{\text{max}} = \frac{\dot{q}_g L^2}{2k} Δ T max ​ = 2 k q ˙ ​ g ​ L 2 ​ .

2. Solid Cylinder of Radius R R R Cooled at Surface ( T ( r = R ) = T w T(r=R) = T_w T ( r = R ) = T w ​ )

Integrating 1 r d d r ( r d T d r ) + q ˙ g k = 0 \frac{1}{r}\frac{d}{dr}\left(r \frac{dT}{dr}\right) + \frac{\dot{q}_g}{k} = 0 r 1 ​ d r d ​ ( r d r d T ​ ) + k q ˙ ​ g ​ ​ = 0 with d T d r ∣ r = 0 = 0 \left.\frac{dT}{dr}\right|_{r=0} = 0 d r d T ​ ​ r = 0 ​ = 0 : T ( r ) = T w + q ˙ g R 2 4 k ( 1 − r 2 R 2 ) T(r) = T_w + \frac{\dot{q}_g R^2}{4k}\left(1 - \frac{r^2}{R^2}\right) T ( r ) = T w ​ + 4 k q ˙ ​ g ​ R 2 ​ ( 1 − R 2 r 2 ​ ) T max = T 0 = T w + q ˙ g R 2 4 k T_{\text{max}} = T_0 = T_w + \frac{\dot{q}_g R^2}{4k} T max ​ = T 0 ​ = T w ​ + 4 k q ˙ ​ g ​ R 2 ​

6. Extended Surfaces (Fins): Governing Equations & Performance

Extended surfaces (fins) are engineered protrusions designed to enhance heat dissipation from a primary surface into a surrounding fluid by increasing effective convective surface area. They are ubiquitous on mining compressor cylinder heads, electronic power converters, and air-cooled heat exchangers. +-----------------------------------------------------------------------------------------+

  • | FIN DIFFERENTIAL CONTROL VOLUME |
  • | |
  • | Base (x=0) dx Tip (x=L) |
  • | +----------+ +------------+ +--------+ |
  • | | T = Tb | ======> | q_x | ======> q_(x+dx) | | |
  • | | | +------------+ +--------+ |
  • | +----------+ | |
  • | v dQ_conv = h * (P*dx) * (T - T_inf) |
  • | |
  • | Governing Fin Equation: d^2(theta)/dx^2 - m^2 * theta = 0 |
  • | Where: theta(x) = T(x) - T_inf, m = sqrt( h*P / (k*Ac) ) |
  • +-----------------------------------------------------------------------------------------+
  • Derivation of Governing Fin Equation

Applying energy balance on a 1D differential element of length d x dx d x , perimeter P P P , and cross-sectional area A c A_c A c ​ : q x − q x + d x − d Q conv = 0 ⟹ − ( − k A c d T d x ) + [ − k A c d d x ( T + d T d x d x ) ] − h ( P d x ) ( T − T ∞ ) = 0 q_x - q_{x+dx} - dQ_{\text{conv}} = 0 \quad \implies \quad -\left(-k A_c \frac{dT}{dx}\right) + \left[-k A_c \frac{d}{dx}\left(T + \frac{dT}{dx} dx\right)\right] - h (P dx)(T - T_{\infty}) = 0 q x ​ − q x + d x ​ − d Q conv ​ = 0 ⟹ − ( − k A c ​ d x d T ​ ) + [ − k A c ​ d x d ​ ( T + d x d T ​ d x ) ] − h ( P d x ) ( T − T ∞ ​ ) = 0 d 2 T d x 2 − h P k A c ( T − T ∞ ) = 0 \frac{d^2 T}{dx^2} - \frac{h P}{k A_c}(T - T_{\infty}) = 0 d x 2 d 2 T ​ − k A c ​ h P ​ ( T − T ∞ ​ ) = 0

Defining excess temperature θ ( x ) = T ( x ) − T ∞ \theta(x) = T(x) - T_{\infty} θ ( x ) = T ( x ) − T ∞ ​ and fin parameter m = h P k A c ( m − 1 ) m = \sqrt{\frac{h P}{k A_c}}\ (\text{m}^{-1}) m = k A c ​ h P ​ ​ ( m − 1 ) : d 2 θ d x 2 − m 2 θ = 0 \frac{d^2\theta}{dx^2} - m^2 \theta = 0 d x 2 d 2 θ ​ − m 2 θ = 0

General solution: θ ( x ) = C 1 e m x + C 2 e − m x = C 3 cosh ⁡ ( m x ) + C 4 sinh ⁡ ( m x ) \theta(x) = C_1 e^{mx} + C_2 e^{-mx} = C_3 \cosh(mx) + C_4 \sinh(mx) θ ( x ) = C 1 ​ e m x + C 2 ​ e − m x = C 3 ​ cosh ( m x ) + C 4 ​ sinh ( m x ) .

The Three Canonical Fin Boundary Conditions

Boundary Condition at Tip ( x = L x=L x = L ) Temperature Profile θ ( x ) θ 0 \frac{\theta(x)}{\theta_0} θ 0 ​ θ ( x ) ​ Total Fin Heat Transfer Rate Q fin Q_{\text{fin}} Q fin ​

1. Infinitely Long Fin ( L → ∞ L \to \infty L → ∞ , θ ( L ) = 0 \theta(L)=0 θ ( L ) = 0 ) e − m x e^{-mx} e − m x h P k A c θ 0 = M \sqrt{h P k A_c} \theta_0 = M h P k A c ​ ​ θ 0 ​ = M

2. Adiabatic / Insulated Tip ( d θ d x ∣ L = 0 \left.\frac{d\theta}{dx}\right\vert_{L} = 0 d x d θ ​ ​ L ​ = 0 ) cosh ⁡ [ m ( L − x ) ] cosh ⁡ ( m L ) \frac{\cosh[m(L-x)]}{\cosh(mL)} c o s h ( m L ) c o s h [ m ( L − x )] ​ h P k A c θ 0 tanh ⁡ ( m L ) = M tanh ⁡ ( m L ) \sqrt{h P k A_c} \theta_0 \tanh(mL) = M \tanh(mL) h P k A c ​ ​ θ 0 ​ tanh ( m L ) = M tanh ( m L )

3. Convective Tip ( − k d θ d x ∣ L = h L θ L -k\left.\frac{d\theta}{dx}\right\vert_{L} = h_L \theta_L − k d x d θ ​ ​ L ​ = h L ​ θ L ​ ) cosh ⁡ [ m ( L − x ) ] + h L m k sinh ⁡ [ m ( L − x ) ] cosh ⁡ ( m L ) + h L m k sinh ⁡ ( m L ) \frac{\cosh[m(L-x)] + \frac{h_L}{mk}\sinh[m(L-x)]}{\cosh(mL) + \frac{h_L}{mk}\sinh(mL)} c o s h ( m L ) + mk h L ​ ​ s i n h ( m L ) c o s h [ m ( L − x )] + mk h L ​ ​ s i n h [ m ( L − x )] ​ h P k A c θ 0 [ sinh ⁡ ( m L ) + h L m k cosh ⁡ ( m L ) cosh ⁡ ( m L ) + h L m k sinh ⁡ ( m L ) ] \sqrt{h P k A_c} \theta_0 \left[\frac{\sinh(mL) + \frac{h_L}{mk}\cosh(mL)}{\cosh(mL) + \frac{h_L}{mk}\sinh(mL)}\right] h P k A c ​ ​ θ 0 ​ [ c o s h ( m L ) + mk h L ​ ​ s i n h ( m L ) s i n h ( m L ) + mk h L ​ ​ c o s h ( m L ) ​ ]

Tip

Corrected Fin Length ( L c L_c L c ​ ): Instead of evaluating cumbersome convective tip hyperbolic series, apply the insulated-tip formula using a corrected length: L c = L + A c P L_c = L + \frac{A_c}{P} L c ​ = L + P A c ​ ​ . For a rectangular fin of thickness t t t , L c = L + t 2 L_c = L + \frac{t}{2} L c ​ = L + 2 t ​ ; for a pin fin of diameter d d d , L c = L + d 4 L_c = L + \frac{d}{4} L c ​ = L + 4 d ​ .

Fin Efficiency ( η fin \eta_{\text{fin}} η fin ​ ) vs. Fin Effectiveness ( ϵ fin \epsilon_{\text{fin}} ϵ fin ​ )

Fin Efficiency ( η fin \eta_{\text{fin}} η fin ​ ): The ratio of actual heat transferred by the fin to the maximum hypothetical heat transfer if the entire fin surface were maintained at base temperature θ 0 \theta_0 θ 0 ​ : η fin = Q actual Q max = Q fin h A fin θ 0 = h P k A c θ 0 tanh ⁡ ( m L ) h ( P L ) θ 0 = tanh ⁡ ( m L ) m L ( for insulated tip ) \eta_{\text{fin}} = \frac{Q_{\text{actual}}}{Q_{\text{max}}} = \frac{Q_{\text{fin}}}{h A_{\text{fin}} \theta_0} = \frac{\sqrt{h P k A_c} \theta_0 \tanh(mL)}{h (P L) \theta_0} = \frac{\tanh(mL)}{mL} \quad (\text{for insulated tip}) η fin ​ = Q max ​ Q actual ​ ​ = h A fin ​ θ 0 ​ Q fin ​ ​ = h ( P L ) θ 0 ​ h P k A c ​ ​ θ 0 ​ tanh ( m L ) ​ = m L tanh ( m L ) ​ ( for insulated tip )

Fin Effectiveness ( ϵ fin \epsilon_{\text{fin}} ϵ fin ​ ): The ratio of heat transferred with the fin to the heat transfer from the bare base area without the fin: ϵ fin = Q fin Q without fin = h P k A c θ 0 tanh ⁡ ( m L ) h A c θ 0 = k P h A c tanh ⁡ ( m L ) \epsilon_{\text{fin}} = \frac{Q_{\text{fin}}}{Q_{\text{without fin}}} = \frac{\sqrt{h P k A_c} \theta_0 \tanh(mL)}{h A_c \theta_0} = \sqrt{\frac{k P}{h A_c}} \tanh(mL) ϵ fin ​ = Q without fin ​ Q fin ​ ​ = h A c ​ θ 0 ​ h P k A c ​ ​ θ 0 ​ tanh ( m L ) ​ = h A c ​ k P ​ ​ tanh ( m L ) ϵ fin = η fin A fin A c \epsilon_{\text{fin}} = \eta_{\text{fin}} \frac{A_{\text{fin}}}{A_c} ϵ fin ​ = η fin ​ A c ​ A fin ​ ​ +-----------------------------------------------------------------------------------------+

  • | CRITERIA FOR EFFECTIVE FIN DESIGN |
  • | |
  • | - Thermal conductivity k MUST be high (use aluminum k=205 W/m*K or copper k=386). |
  • | - Convective coefficient h MUST be low (fins on air/gas side, NOT liquid/water side). |
  • | - Perimeter-to-area ratio (P / Ac) MUST be large (thin, slender, closely spaced fins).|
  • | - Justification Threshold: epsilon_fin >= 2.0 (if epsilon_fin < 1, fin acts as |
  • | an insulator and impedes heat dissipation!). |
  • +-----------------------------------------------------------------------------------------+
  • 7. Transient Conduction & The Lumped Capacitance Method

In transient (unsteady-state) conduction, temperature varies with both spatial position and time ( T = T ( x , y , z , t ) T = T(x, y, z, t) T = T ( x , y , z , t ) ). When internal conductive resistance within a solid is negligible compared to external convective resistance, internal temperature gradients vanish, and the solid behaves as a single spatially uniform lumped thermal capacitance. +-----------------------------------------------------------------------------------------+

  • | LUMPED CAPACITANCE ENERGY BALANCE |
  • | |
  • | Solid Body: Volume V, Area As, Density rho, Specific Heat cp, Initial Temp T0 |
  • | |
  • | - dE_stored / dt = dQ_conv / dt |
  • | - rho * V * cp * (dT/dt) = h * As * (T - T_inf) |
  • | |
  • | Temperature Response: |
  • | (T(t) - T_inf) / (T0 - T_inf) = exp( - (h*As / (rho*V*cp)) * t ) |
  • | = exp( - t / tau ) = exp( - Bi * Fo ) |
  • +-----------------------------------------------------------------------------------------+
  • Governing Non-Dimensional Parameters

Characteristic Length ( L c L_c L c ​ ): L c = Volume V Surface Area A s L_c = \frac{\text{Volume } V}{\text{Surface Area } A_s} L c ​ = Surface Area A s ​ Volume V ​

Plane slab of thickness 2 L 2L 2 L cooled on both sides: L c = 2 L A 2 A = L L_c = \frac{2L A}{2A} = L L c ​ = 2 A 2 L A ​ = L

Long cylinder of radius R R R : L c = π R 2 L 2 π R L = R 2 L_c = \frac{\pi R^2 L}{2\pi R L} = \frac{R}{2} L c ​ = 2 π R L π R 2 L ​ = 2 R ​

Sphere of radius R R R : L c = 4 3 π R 3 4 π R 2 = R 3 L_c = \frac{\frac{4}{3}\pi R^3}{4\pi R^2} = \frac{R}{3} L c ​ = 4 π R 2 3 4 ​ π R 3 ​ = 3 R ​

Cube of side L L L : L c = L 3 6 L 2 = L 6 L_c = \frac{L^3}{6L^2} = \frac{L}{6} L c ​ = 6 L 2 L 3 ​ = 6 L ​

Biot Number ( Bi \text{Bi} Bi ): Ratio of internal conductive resistance to external convective boundary resistance: Bi = R cond R conv = L c / ( k solid A s ) 1 / ( h A s ) = h L c k solid \text{Bi} = \frac{R_{\text{cond}}}{R_{\text{conv}}} = \frac{L_c / (k_{\text{solid}} A_s)}{1 / (h A_s)} = \frac{h L_c}{k_{\text{solid}}} Bi = R conv ​ R cond ​ ​ = 1/ ( h A s ​ ) L c ​ / ( k solid ​ A s ​ ) ​ = k solid ​ h L c ​ ​

Important

Validity Criterion: The lumped capacitance method is strictly valid if and only if Bi < 0.1 \text{Bi} < 0.1 Bi < 0.1 . When Bi < 0.1 \text{Bi} < 0.1 Bi < 0.1 , the maximum temperature variation across the solid body is less than 5%, and spatial gradients can be safely neglected.

Fourier Number ( Fo \text{Fo} Fo ): Dimensionless time variable measuring the rate of heat conduction relative to thermal storage: Fo = α t L c 2 = k t ρ c p L c 2 \text{Fo} = \frac{\alpha t}{L_c^2} = \frac{k t}{\rho c_p L_c^2} Fo = L c 2 ​ α t ​ = ρ c p ​ L c 2 ​ k t ​ Bi ⋅ Fo = ( h L c k ) ( k t ρ c p L c 2 ) = h A s ρ V c p t = t τ \text{Bi} \cdot \text{Fo} = \left(\frac{h L_c}{k}\right) \left(\frac{k t}{\rho c_p L_c^2}\right) = \frac{h A_s}{\rho V c_p} t = \frac{t}{\tau} Bi ⋅ Fo = ( k h L c ​ ​ ) ( ρ c p ​ L c 2 ​ k t ​ ) = ρ V c p ​ h A s ​ ​ t = τ t ​

Where τ = ρ V c p h A s = R conv C th \tau = \frac{\rho V c_p}{h A_s} = R_{\text{conv}} C_{\text{th}} τ = h A s ​ ρ V c p ​ ​ = R conv ​ C th ​ is the Thermal Time Constant of the system (seconds).

  • 8. Step-by-Step Worked Calculation: Industrial Cable Insulation & Pin Fin Heat Sink
  • Worked Example 1: Critical Insulation Radius for Mining Feeder Cable

A high-voltage electrical cable in an underground mine shaft has a bare copper radius of r 1 = 5 mm r_1 = 5\text{ mm} r 1 ​ = 5 mm and is coated with rubber insulation ( k = 0.16 W/m ⋅ K k = 0.16\text{ W/m}\cdot\text{K} k = 0.16 W/m ⋅ K ). The cable is exposed to ventilation air with convective heat transfer coefficient h = 20 W/m 2 ⋅ K h = 20\text{ W/m}^2\cdot\text{K} h = 20 W/m 2 ⋅ K . +-----------------------------------------------------------------------------------------+

  • | CABLE INSULATION CALCULATION STEPS |
  • | |
  • | 1. Calculate Critical Radius: |
  • | r_cr = k / h = (0.16 W/m*K) / (20 W/m^2*K) = 0.008 m = 8.0 mm |
  • | |
  • | 2. Compare with Bare Cable Radius: |
  • | r_bare = 5.0 mm < r_cr (8.0 mm) |
  • | |
  • | 3. Critical Insulation Thickness: |
  • | t_cr = r_cr - r_1 = 8.0 mm - 5.0 mm = 3.0 mm |
  • | |
  • | 4. Physical Interpretation: |
  • | Adding up to 3.0 mm of rubber insulation INCREASES current carrying capacity |
  • | by maximizing heat dissipation rate from the copper core. |
  • +-----------------------------------------------------------------------------------------+
  • Worked Example 2: Transient Cooling of Steel Bearing Ball

A chrome-steel bearing sphere ( D = 50 mm D = 50\text{ mm} D = 50 mm , ρ = 7800 kg/m 3 \rho = 7800\text{ kg/m}^3 ρ = 7800 kg/m 3 , c p = 460 J/kg ⋅ K c_p = 460\text{ J/kg}\cdot\text{K} c p ​ = 460 J/kg ⋅ K , k = 40 W/m ⋅ K k = 40\text{ W/m}\cdot\text{K} k = 40 W/m ⋅ K ) is quenched from T 0 = 800 ∘ C T_0 = 800^{\circ}\text{C} T 0 ​ = 80 0 ∘ C in an agitated oil bath at T ∞ = 50 ∘ C T_{\infty} = 50^{\circ}\text{C} T ∞ ​ = 5 0 ∘ C with h = 160 W/m 2 ⋅ K h = 160\text{ W/m}^2\cdot\text{K} h = 160 W/m 2 ⋅ K . Determine the time required for the sphere center to cool to 100 ∘ C 100^{\circ}\text{C} 10 0 ∘ C . +-----------------------------------------------------------------------------------------+

  • | BEARING QUENCHING CALCULATION STEPS |
  • | |
  • | STEP 1: Calculate Characteristic Length (Lc) |
  • | Lc = R / 3 = (0.025 m) / 3 = 0.008333 m |
  • | |
  • | STEP 2: Check Biot Number Validity |
  • | Bi = h * Lc / k = (160 * 0.008333) / 40 = 0.03333 |
  • | Since Bi = 0.0333 < 0.1, Lumped Capacitance is VALID! |
  • | |
  • | STEP 3: Calculate Thermal Time Constant (tau) |
  • | tau = (rho * cp * Lc) / h |
  • | = (7800 kg/m^3 * 460 J/kg*K * 0.008333 m) / (160 W/m^2*K) |
  • | = 29880 / 160 = 186.75 seconds |
  • | |
  • | STEP 4: Calculate Cooling Time t |
  • | (T(t) - T_inf) / (T0 - T_inf) = exp( - t / tau ) |
  • | (100 - 50) / (800 - 50) = 50 / 750 = 0.06667 |
  • | ln(0.06667) = - t / 186.75 |
  • | -2.70805 = - t / 186.75 ===> t = 505.7 seconds (approx 8.43 minutes) |
  • +-----------------------------------------------------------------------------------------+