Study guide

13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU

Key Takeaways Explain This Topic AI

Convective heat transfer relies on dimensionless parameters: Nu = h L/k_fluid (enhancement over pure conduction), Re = rho V L/mu (inertia vs viscous), Pr = nu/alpha (momentum vs thermal diffusivity), and Gr = g beta Delta_T L^3/nu^2 (buoyancy vs viscous).

Flow regime classification governs correlation selection: forced convection dominates when Gr/Re^2 << 1, natural convection dominates when Gr/Re^2 >> 1, and mixed convection occurs when Gr/Re^2 approx 1; turbulent tube flow follows Dittus-Boelter Nu_D = 0.023 Re_D^0.8 Pr^n (n=0.4 heating, n=0.3 cooling).

Radiation heat transfer between grey bodies obeys the Stefan-Boltzmann law E_b = sigma T^4, Wien's displacement law lambda_max T = 2898 micron K, and view factor algebra (sum F_ij = 1, A_i F_ij = A_j*F_ji); n radiation shields reduce net radiative transfer by a factor of 1/(n+1).

Heat exchanger rating uses LMTD = (Delta_T1 - Delta_T2)/ln(Delta_T1/Delta_T2); counter-flow geometry yields LMTD_counter > LMTD_parallel for identical terminal temperatures, requiring less surface area and allowing cold fluid outlet temperature to exceed hot fluid outlet temperature.

The Effectiveness-NTU method evaluates heat exchangers where NTU = UA/C_min and epsilon = Q_act/Q_max; for phase-change components (condensers/evaporators) where capacity ratio C_r = C_min/C_max = 0, effectiveness simplifies to epsilon = 1 - exp(-NTU) for all flow configurations.

Last updated: August 2026

Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU

Thermal energy exchange in industrial mining complexes encompasses convective cooling of heavy mining haul truck engines, radiation inside coal-fired power boilers, and heat recovery via shell-and-tube heat exchangers. This section establishes the theoretical foundations and empirical correlations for convective transport, radiative enclosures, and heat exchanger thermal design.

1. Convective Heat Transfer Fundamentals & Non-Dimensional Numbers

Convection heat transfer occurs between a solid surface and a moving fluid governed by Newton's Law of Cooling : q = h A s ( T s − T ∞ ) ⟹ q ′ ′ = h ( T s − T ∞ ) q = h A_s (T_s - T_{\infty}) \quad \implies \quad q'' = h (T_s - T_{\infty}) q = h A s ​ ( T s ​ − T ∞ ​ ) ⟹ q ′′ = h ( T s ​ − T ∞ ​ )

Where h ( W/m 2 ⋅ K ) h\ (\text{W/m}^2\cdot\text{K}) h ( W/m 2 ⋅ K ) is the local or average convective heat transfer coefficient. Because h h h is a complex function of fluid properties ( ρ , μ , c p , k \rho, \mu, c_p, k ρ , μ , c p ​ , k ), flow velocity ( V V V ), and surface geometry ( L L L ), dimensional analysis groups these variables into foundational dimensionless numbers. +-----------------------------------------------------------------------------------------+

  • | FOUNDATIONAL NON-DIMENSIONAL NUMBERS |
  • | |
  • | Dimensionless Group Definition Physical Significance |
  • | -------------------- ----------------------- --------------------------------- |
  • | Nusselt Number (Nu) Nu = h * L / k_fluid Ratio of convective to conductive |
  • | heat transfer across fluid layer. |
  • | Reynolds Number (Re) Re = rho * V * L / mu Ratio of dynamic inertia forces |
  • | = V * L / nu to viscous shear forces. |
  • | Prandtl Number (Pr) Pr = nu / alpha Ratio of momentum diffusivity to |
  • | = mu * cp / k_fluid thermal diffusivity. |
  • | Grashof Number (Gr) Gr = g*beta*DeltaT*L^3/nu^2 Ratio of natural buoyancy forces |
  • | to viscous hydrodynamic forces. |
  • | Rayleigh Number (Ra) Ra = Gr * Pr Governs laminar-to-turbulent |
  • | transition in natural convection. |
  • +-----------------------------------------------------------------------------------------+
  • Boundary Layer Mechanics & The Prandtl Number ( Pr \text{Pr} Pr )

When a fluid flows over a surface, two distinct boundary layers develop:

Hydrodynamic Boundary Layer ( δ \delta δ ): Region where velocity transitions from u = 0 u=0 u = 0 at the wall (no-slip condition) to 0.99 V ∞ 0.99 V_{\infty} 0.99 V ∞ ​ .

Thermal Boundary Layer ( δ t \delta_t δ t ​ ): Region where fluid temperature transitions from T s T_s T s ​ at the wall to 0.99 T ∞ 0.99 T_{\infty} 0.99 T ∞ ​ .

The relative thickness of these two boundary layers is governed directly by the Prandtl number: δ δ t ≈ Pr 1 / 3 \frac{\delta}{\delta_t} \approx \text{Pr}^{1/3} δ t ​ δ ​ ≈ Pr 1/3

Liquid Metals ( Pr ∼ 0.005 – 0.03 \text{Pr} \sim 0.005\text{--}0.03 Pr ∼ 0.005 – 0.03 ): δ t ≫ δ \delta_t \gg \delta δ t ​ ≫ δ . Thermal conduction outpaces momentum diffusion; thermal boundary layer extends far into free stream.

Gases / Air ( Pr ∼ 0.70 – 0.80 \text{Pr} \sim 0.70\text{--}0.80 Pr ∼ 0.70 – 0.80 ): δ t ≈ δ \delta_t \approx \delta δ t ​ ≈ δ . Velocity and temperature profiles develop at nearly identical rates.

Water ( Pr ∼ 2 – 10 \text{Pr} \sim 2\text{--}10 Pr ∼ 2 – 10 ): δ > δ t \delta > \delta_t δ > δ t ​ . Viscous hydrodynamic boundary layer is thicker than the thermal layer.

Heavy Oils ( Pr ∼ 100 – 100 , 000 \text{Pr} \sim 100\text{--}100,000 Pr ∼ 100 – 100 , 000 ): δ ≫ δ t \delta \gg \delta_t δ ≫ δ t ​ . High viscosity suppresses momentum while thermal energy diffuses slowly.

Regime Selection: Forced vs. Natural vs. Mixed Convection

The relative dominance of natural versus forced convection is determined by the ratio Gr Re 2 \frac{\text{Gr}}{\text{Re}^2} Re 2 Gr ​ :

Gr Re 2 ≪ 1 \frac{\text{Gr}}{\text{Re}^2} \ll 1 Re 2 Gr ​ ≪ 1 : Forced convection dominates; buoyancy effects are entirely negligible.

Gr Re 2 ≫ 1 \frac{\text{Gr}}{\text{Re}^2} \gg 1 Re 2 Gr ​ ≫ 1 : Natural (free) convection dominates; forced velocity effects are negligible.

Gr Re 2 ≈ 1 \frac{\text{Gr}}{\text{Re}^2} \approx 1 Re 2 Gr ​ ≈ 1 : Mixed convection; both buoyancy and forced inertia forces must be accounted for ( N u combined = [ N u forced n ± N u natural n ] 1 / n Nu_{\text{combined}} = [Nu_{\text{forced}}^n \pm Nu_{\text{natural}}^n]^{1/n} N u combined ​ = [ N u forced n ​ ± N u natural n ​ ] 1/ n ).

  • 2. Forced Convection Empirical Correlations
  • 1. Fully Developed Laminar Flow in Circular Tubes ( Re D < 2300 \text{Re}_D < 2300 Re D ​ < 2300 )

For fully developed internal laminar pipe flow, the Nusselt number is a constant value independent of Reynolds and Prandtl numbers: Constant Surface Heat Flux ( q s ′ ′ = const ) : Nu D = h D k = 48 11 ≈ 4.36 \text{Constant Surface Heat Flux } (q_s'' = \text{const}): \quad \text{Nu}_D = \frac{h D}{k} = \frac{48}{11} \approx 4.36 Constant Surface Heat Flux ( q s ′′ ​ = const ) : Nu D ​ = k h D ​ = 11 48 ​ ≈ 4.36 Constant Surface Temperature ( T s = const ) : Nu D = h D k = 3.66 \text{Constant Surface Temperature } (T_s = \text{const}): \quad \text{Nu}_D = \frac{h D}{k} = 3.66 Constant Surface Temperature ( T s ​ = const ) : Nu D ​ = k h D ​ = 3.66

2. Fully Developed Turbulent Flow in Circular Tubes ( Re D > 10 , 000 \text{Re}_D > 10,000 Re D ​ > 10 , 000 )

The classical Dittus-Boelter Equation applies for smooth circular tubes under moderate temperature differences ( 0.6 ≤ Pr ≤ 160 0.6 \le \text{Pr} \le 160 0.6 ≤ Pr ≤ 160 , L / D > 10 L/D > 10 L / D > 10 ): Nu D = 0.023 Re D 0.8 Pr n \text{Nu}_D = 0.023 \, \text{Re}_D^{0.8} \, \text{Pr}^n Nu D ​ = 0.023 Re D 0.8 ​ Pr n Where: n = 0.4 ( Heating of fluid: T s > T b ) , n = 0.3 ( Cooling of fluid: T s < T b ) \text{Where: } \quad n = 0.4 \quad (\text{Heating of fluid: } T_s > T_b), \qquad n = 0.3 \quad (\text{Cooling of fluid: } T_s < T_b) Where: n = 0.4 ( Heating of fluid: T s ​ > T b ​ ) , n = 0.3 ( Cooling of fluid: T s ​ < T b ​ )

Note

Property Evaluation: In the Dittus-Boelter correlation, all fluid physical properties ( ρ , μ , c p , k \rho, \mu, c_p, k ρ , μ , c p ​ , k ) are evaluated at the bulk mean fluid temperature T b = ( T m , i + T m , o ) / 2 T_b = (T_{m,i} + T_{m,o})/2 T b ​ = ( T m , i ​ + T m , o ​ ) /2 .

When large temperature differences cause significant radial variation in fluid dynamic viscosity, the Sieder-Tate Correlation is applied: Nu D = 0.027 Re D 0.8 Pr 1 / 3 ( μ b μ w ) 0.14 \text{Nu}_D = 0.027 \, \text{Re}_D^{0.8} \, \text{Pr}^{1/3} \left(\frac{\mu_b}{\mu_w}\right)^{0.14} Nu D ​ = 0.027 Re D 0.8 ​ Pr 1/3 ( μ w ​ μ b ​ ​ ) 0.14

Where μ b \mu_b μ b ​ is evaluated at bulk temperature and μ w \mu_w μ w ​ is evaluated at the tube wall temperature.

3. Natural (Free) Convection Correlations

Natural convection is driven by density gradients in the presence of a body force (gravity g g g ). The volumetric coefficient of thermal expansion β \beta β is defined as: β = − 1 ρ ( ∂ ρ ∂ T ) P ≈ 1 T f ( for ideal gases, where T f = ( T s + T ∞ ) / 2 in Kelvin ) \beta = -\frac{1}{\rho}\left(\frac{\partial \rho}{\partial T}\right)_P \approx \frac{1}{T_f} \quad (\text{for ideal gases, where } T_f = (T_s + T_{\infty})/2 \text{ in Kelvin}) β = − ρ 1 ​ ( ∂ T ∂ ρ ​ ) P ​ ≈ T f ​ 1 ​ ( for ideal gases, where T f ​ = ( T s ​ + T ∞ ​ ) /2 in Kelvin ) Rayleigh Number Ra L = Gr L ⋅ Pr = g β ( T s − T ∞ ) L 3 ν α \text{Rayleigh Number } \text{Ra}_L = \text{Gr}_L \cdot \text{Pr} = \frac{g \beta (T_s - T_{\infty}) L^3}{\nu \alpha} Rayleigh Number Ra L ​ = Gr L ​ ⋅ Pr = να g β ( T s ​ − T ∞ ​ ) L 3 ​

Vertical Plates and Cylinders of Height L L L

Laminar Flow ( Ra L < 10 9 \text{Ra}_L < 10^9 Ra L ​ < 1 0 9 ): Nu ‾ L = 0.59 Ra L 1 / 4 \overline{\text{Nu}}_L = 0.59 \, \text{Ra}_L^{1/4} Nu L ​ = 0.59 Ra L 1/4 ​

Turbulent Flow ( Ra L > 10 9 \text{Ra}_L > 10^9 Ra L ​ > 1 0 9 ): Nu ‾ L = 0.10 Ra L 1 / 3 \overline{\text{Nu}}_L = 0.10 \, \text{Ra}_L^{1/3} Nu L ​ = 0.10 Ra L 1/3 ​

Important

Height Independence in Turbulent Natural Convection: In the turbulent regime where Nu ‾ L ∝ Ra L 1 / 3 ∝ ( L 3 ) 1 / 3 ∝ L \overline{\text{Nu}}_L \propto \text{Ra}_L^{1/3} \propto (L^3)^{1/3} \propto L Nu L ​ ∝ Ra L 1/3 ​ ∝ ( L 3 ) 1/3 ∝ L , we find h L k ∝ L ⟹ h = constant \frac{h L}{k} \propto L \implies h = \text{constant} k h L ​ ∝ L ⟹ h = constant . The average convective heat transfer coefficient h h h becomes completely independent of vertical plate height L L L in turbulent free convection.

4. Radiation Fundamentals & Governing Laws

Thermal radiation is electromagnetic radiation emitted by matter as a result of its temperature, propagating at the speed of light ( c 0 = 3 × 10 8 m/s c_0 = 3 \times 10^8\text{ m/s} c 0 ​ = 3 × 1 0 8 m/s ) across wavelengths λ = 0.1 – 100 μ m \lambda = 0.1\text{--}100\ \mu\text{m} λ = 0.1 – 100 μ m (spanning ultraviolet, visible, and infrared spectra). +-----------------------------------------------------------------------------------------+

  • | FUNDAMENTAL RADIATION LAWS |
  • | |
  • | Law Mathematical Formula Physical Meaning |
  • | -------------------- --------------------------------- ----------------------- |
  • | Stefan-Boltzmann Law E_b = sigma * T^4 Total emissive power of |
  • | sigma = 5.67e-8 W/(m^2*K^4) an ideal black body. |
  • | Planck's Law E_b_lambda(lambda, T) Spectral distribution |
  • | = C1 / [lambda^5 * (exp(C2/lambda*T) - 1)] of black body radiation.|
  • | Wien's Displacement lambda_max * T = 2898 micron*K Peak emission wavelength|
  • | = 2.898e-3 m*K shifts inversely with T.|
  • | Kirchhoff's Law alpha_lambda = epsilon_lambda Monochromatic absorptivity|
  • | alpha = epsilon (Grey Body) equals emissivity at Teq|
  • +-----------------------------------------------------------------------------------------+
  • Surface Radiation Properties

For any incident radiative irradiation G ( W/m 2 ) G\ (\text{W/m}^2) G ( W/m 2 ) striking a surface: α + ρ r + τ r = 1 \alpha + \rho_r + \tau_r = 1 α + ρ r ​ + τ r ​ = 1

Where α \alpha α is absorptivity, ρ r \rho_r ρ r ​ is reflectivity, and τ r \tau_r τ r ​ is transmissivity.

Opaque Body ( τ r = 0 \tau_r = 0 τ r ​ = 0 ): α + ρ r = 1 \alpha + \rho_r = 1 α + ρ r ​ = 1 .

Black Body ( α = 1 , ρ r = 0 , τ r = 0 \alpha = 1, \rho_r = 0, \tau_r = 0 α = 1 , ρ r ​ = 0 , τ r ​ = 0 ): Perfect absorber and perfect emitter ( ϵ = 1 \epsilon = 1 ϵ = 1 ).

Grey Body: A surface whose monochromatic emissivity ϵ λ \epsilon_{\lambda} ϵ λ ​ and absorptivity α λ \alpha_{\lambda} α λ ​ are independent of wavelength across the spectral band: ϵ = α = const < 1 \epsilon = \alpha = \text{const} < 1 ϵ = α = const < 1 .

5. View Factor (Shape Factor) Algebra & Enclosure Theory

The view factor (or configuration/shape factor) F i j F_{ij} F ij ​ is defined as the fraction of diffuse radiation leaving surface i i i that is directly intercepted by surface j j j : F i j = 1 A i ∫ A i ∫ A j cos ⁡ θ i cos ⁡ θ j π R 2 d A j d A i F_{ij} = \frac{1}{A_i} \int_{A_i} \int_{A_j} \frac{\cos\theta_i \cos\theta_j}{\pi R^2} dA_j dA_i F ij ​ = A i ​ 1 ​ ∫ A i ​ ​ ∫ A j ​ ​ π R 2 cos θ i ​ cos θ j ​ ​ d A j ​ d A i ​ +-----------------------------------------------------------------------------------------+

  • | VIEW FACTOR ALGEBRA RULES |
  • | |
  • | 1. Reciprocity Relation: A_i * F_ij = A_j * F_ji |
  • | 2. Summation Rule (Enclosure): sum_{j=1}^N F_ij = 1 |
  • | 3. Flat / Convex Surface: F_ii = 0 (A surface cannot see itself) |
  • | 4. Concave Surface: F_ii > 0 (A concave cavity radiates to itself) |
  • | 5. Superposition Rule: F_1(2+3) = F_12 + F_13 |
  • | F_(2+3)1 = (A_2*F_21 + A_3*F_31) / (A_2 + A_3) |
  • +-----------------------------------------------------------------------------------------+
  • Standard 2-Surface View Factor Geometries

Hemisphere Cavity (Surface 1) closed by Flat Disc Base (Surface 2):

Base 2 is flat: F 22 = 0 ⟹ F 21 = 1 F_{22} = 0 \implies F_{21} = 1 F 22 ​ = 0 ⟹ F 21 ​ = 1 .

By Reciprocity: A 1 F 12 = A 2 F 21 ⟹ ( 2 π R 2 ) F 12 = ( π R 2 ) ( 1 ) ⟹ F 12 = 0.5 A_1 F_{12} = A_2 F_{21} \implies (2\pi R^2) F_{12} = (\pi R^2)(1) \implies F_{12} = 0.5 A 1 ​ F 12 ​ = A 2 ​ F 21 ​ ⟹ ( 2 π R 2 ) F 12 ​ = ( π R 2 ) ( 1 ) ⟹ F 12 ​ = 0.5 .

By Summation: F 11 + F 12 = 1 ⟹ F 11 = 1 − 0.5 = 0.5 F_{11} + F_{12} = 1 \implies F_{11} = 1 - 0.5 = 0.5 F 11 ​ + F 12 ​ = 1 ⟹ F 11 ​ = 1 − 0.5 = 0.5 .

Infinite Concentric Cylinders (Inner 1, Outer 2):

Inner cylinder is convex: F 11 = 0 ⟹ F 12 = 1 F_{11} = 0 \implies F_{12} = 1 F 11 ​ = 0 ⟹ F 12 ​ = 1 .

By Reciprocity: A 1 F 12 = A 2 F 21 ⟹ F 21 = A 1 A 2 = r 1 r 2 A_1 F_{12} = A_2 F_{21} \implies F_{21} = \frac{A_1}{A_2} = \frac{r_1}{r_2} A 1 ​ F 12 ​ = A 2 ​ F 21 ​ ⟹ F 21 ​ = A 2 ​ A 1 ​ ​ = r 2 ​ r 1 ​ ​ .

By Summation: F 22 = 1 − F 21 = 1 − r 1 r 2 F_{22} = 1 - F_{21} = 1 - \frac{r_1}{r_2} F 22 ​ = 1 − F 21 ​ = 1 − r 2 ​ r 1 ​ ​ .

6. Radiative Heat Exchange Between Grey Surfaces & Radiation Shields

Using the radiation electrical network analogy, each real surface has a surface resistance and each pair of surfaces shares a space resistance : +-----------------------------------------------------------------------------------------+

  • | TWO-SURFACE RADIATION NETWORK CIRCUIT |
  • | |
  • | [E_b1 = sigma*T1^4] [E_b2 = sigma*T2^4] |
  • | o---/\/\/\/\/\/---[J1]---/\/\/\/\/\/---[J2]---/\/\/\/\/\/---o |
  • | R_surface,1 R_space R_surface,2 |
  • | (1-eps1)/(eps1*A1) 1/(A1*F12) (1-eps2)/(eps2*A2) |
  • | |
  • | Net Heat Exchange Rate: |
  • | q_12 = sigma * (T1^4 - T2^4) / [ (1-eps1)/(eps1*A1) + 1/(A1*F12) + (1-eps2)/(eps2*A2) ]|
  • +-----------------------------------------------------------------------------------------+

1. Two Infinite Parallel Grey Plates ( A 1 = A 2 = A , F 12 = 1 A_1 = A_2 = A, F_{12} = 1 A 1 ​ = A 2 ​ = A , F 12 ​ = 1 ) q 12 ′ ′ = q 12 A = σ ( T 1 4 − T 2 4 ) 1 ϵ 1 + 1 ϵ 2 − 1 q_{12}'' = \frac{q_{12}}{A} = \frac{\sigma (T_1^4 - T_2^4)}{\frac{1}{\epsilon_1} + \frac{1}{\epsilon_2} - 1} q 12 ′′ ​ = A q 12 ​ ​ = ϵ 1 ​ 1 ​ + ϵ 2 ​ 1 ​ − 1 σ ( T 1 4 ​ − T 2 4 ​ ) ​

2. Radiation Shields

A radiation shield is a thin, highly reflective sheet placed between two radiating surfaces to introduce additional surface and space resistances without generating or absorbing work. +-----------------------------------------------------------------------------------------+

  • | RADIATION SHIELD ATTENUATION |
  • | |
  • | For n identical thin shields (emissivity eps_s = eps_1 = eps_2) inserted between |
  • | two large parallel plates: |
  • | |
  • | (q_12)_with_n_shields = [ 1 / (n + 1) ] * (q_12)_without_shield |
  • | |
  • | - 1 Shield (n=1): Reduces radiative heat transfer by 50% (Factor = 1/2) |
  • | - 2 Shields (n=2): Reduces radiative heat transfer by 66.7% (Factor = 1/3) |
  • | - 3 Shields (n=3): Reduces radiative heat transfer by 75% (Factor = 1/4) |
  • +-----------------------------------------------------------------------------------------+
  • 7. Heat Exchanger Analysis: Log Mean Temperature Difference (LMTD)

Heat exchangers facilitate thermal transfer between two fluids separated by a solid wall. The fundamental rating equation is: Q ˙ = U A Δ T m \dot{Q} = U A \Delta T_m Q ˙ ​ = U A Δ T m ​

Where U U U is the overall heat transfer coefficient, A A A is the heat transfer area, and Δ T m \Delta T_m Δ T m ​ is the Log Mean Temperature Difference (LMTD). +-----------------------------------------------------------------------------------------+

  • | PARALLEL FLOW VS COUNTER FLOW PROFILES |
  • | |
  • | PARALLEL FLOW: COUNTER FLOW: |
  • | Temp Temp |
  • | ^ T_h,in ^ T_h,in |
  • | | * | * |
  • | | \ Hot Fluid | \ Hot Fluid T_c,out |
  • | | \---------> T_h,out | \-------------> * |
  • | | * | \ Cold Fluid |
  • | | /---------> T_c,out | /-----------------\ |
  • | | / Cold Fluid | / * T_c,in |
  • | | * T_c,in | * T_h,out |
  • | +----------------------> Area +----------------------> Area |
  • | DeltaT1 DeltaT2 DeltaT1 DeltaT2 |
  • | (Inlet) (Outlet) (Left End) (Right End) |

+-----------------------------------------------------------------------------------------+ LMTD = Δ T m = Δ T 1 − Δ T 2 ln ⁡ ( Δ T 1 Δ T 2 ) \text{LMTD} = \Delta T_m = \frac{\Delta T_1 - \Delta T_2}{\ln\left(\frac{\Delta T_1}{\Delta T_2}\right)} LMTD = Δ T m ​ = ln ( Δ T 2 ​ Δ T 1 ​ ​ ) Δ T 1 ​ − Δ T 2 ​ ​

Parallel Flow: Δ T 1 = T h , in − T c , in \Delta T_1 = T_{h,\text{in}} - T_{c,\text{in}} Δ T 1 ​ = T h , in ​ − T c , in ​ , Δ T 2 = T h , out − T c , out \Delta T_2 = T_{h,\text{out}} - T_{c,\text{out}} Δ T 2 ​ = T h , out ​ − T c , out ​ .

Counter Flow: Δ T 1 = T h , in − T c , out \Delta T_1 = T_{h,\text{in}} - T_{c,\text{out}} Δ T 1 ​ = T h , in ​ − T c , out ​ , Δ T 2 = T h , out − T c , in \Delta T_2 = T_{h,\text{out}} - T_{c,\text{in}} Δ T 2 ​ = T h , out ​ − T c , in ​ .

Important

Why Counter-Flow is Thermodynamically Superior:

For identical inlet and outlet temperatures, LMTD counter > LMTD parallel \text{LMTD}_{\text{counter}} > \text{LMTD}_{\text{parallel}} LMTD counter ​ > LMTD parallel ​ , meaning a counter-flow heat exchanger requires less surface area ( A A A ) to transfer the same thermal duty.

In counter-flow, the cold fluid exit temperature can exceed the hot fluid exit temperature ( T c , out > T h , out T_{c,\text{out}} > T_{h,\text{out}} T c , out ​ > T h , out ​ ), which is physically impossible in parallel flow.

Special Mathematical Cases of LMTD

Balanced Counter-Flow ( C h = C c ⟹ Δ T 1 = Δ T 2 = Δ T C_h = C_c \implies \Delta T_1 = \Delta T_2 = \Delta T C h ​ = C c ​ ⟹ Δ T 1 ​ = Δ T 2 ​ = Δ T ): The temperature difference is constant throughout the exchanger. Direct evaluation of LMTD yields 0 / 0 0/0 0/0 ; applying L'Hôpital's rule gives: LMTD = Δ T 1 = Δ T 2 \text{LMTD} = \Delta T_1 = \Delta T_2 LMTD = Δ T 1 ​ = Δ T 2 ​

Phase Change Components (Condensers and Boilers/Evaporators): One fluid changes phase at constant saturation temperature ( C max → ∞ C_{\text{max}} \to \infty C max ​ → ∞ ). The temperature profile is identical regardless of flow direction: LMTD counter = LMTD parallel \text{LMTD}_{\text{counter}} = \text{LMTD}_{\text{parallel}} LMTD counter ​ = LMTD parallel ​

8. Heat Exchanger Analysis: The Effectiveness-NTU ( ϵ -NTU \epsilon\text{-NTU} ϵ -NTU ) Method

When fluid outlet temperatures are unknown, the LMTD method requires tedious iterative trials. The Effectiveness-NTU method solves performance directly from known inlet conditions.

1. Fluid Heat Capacity Rates C h = m ˙ h c p , h , C c = m ˙ c c p , c C_h = \dot{m}_h c_{p,h}, \qquad C_c = \dot{m}_c c_{p,c} C h ​ = m ˙ h ​ c p , h ​ , C c ​ = m ˙ c ​ c p , c ​ C min = min ⁡ ( C h , C c ) , C max = max ⁡ ( C h , C c ) , C r = C min C max ( 0 ≤ C r ≤ 1 ) C_{\text{min}} = \min(C_h, C_c), \qquad C_{\text{max}} = \max(C_h, C_c), \qquad C_r = \frac{C_{\text{min}}}{C_{\text{max}}} \quad (0 \le C_r \le 1) C min ​ = min ( C h ​ , C c ​ ) , C max ​ = max ( C h ​ , C c ​ ) , C r ​ = C max ​ C min ​ ​ ( 0 ≤ C r ​ ≤ 1 )

2. Maximum Possible Heat Transfer Rate ( Q max Q_{\text{max}} Q max ​ ) Q max = C min ( T h , in − T c , in ) Q_{\text{max}} = C_{\text{min}} (T_{h,\text{in}} - T_{c,\text{in}}) Q max ​ = C min ​ ( T h , in ​ − T c , in ​ )

3. Heat Exchanger Effectiveness ( ϵ \epsilon ϵ ) ϵ = Q actual Q max = C h ( T h , in − T h , out ) C min ( T h , in − T c , in ) = C c ( T c , out − T c , in ) C min ( T h , in − T c , in ) \epsilon = \frac{Q_{\text{actual}}}{Q_{\text{max}}} = \frac{C_h (T_{h,\text{in}} - T_{h,\text{out}})}{C_{\text{min}} (T_{h,\text{in}} - T_{c,\text{in}})} = \frac{C_c (T_{c,\text{out}} - T_{c,\text{in}})}{C_{\text{min}} (T_{h,\text{in}} - T_{c,\text{in}})} ϵ = Q max ​ Q actual ​ ​ = C min ​ ( T h , in ​ − T c , in ​ ) C h ​ ( T h , in ​ − T h , out ​ ) ​ = C min ​ ( T h , in ​ − T c , in ​ ) C c ​ ( T c , out ​ − T c , in ​ ) ​

4. Number of Transfer Units ( NTU \text{NTU} NTU ) NTU = U A C min \text{NTU} = \frac{U A}{C_{\text{min}}} NTU = C min ​ U A ​ +-----------------------------------------------------------------------------------------+

  • | EFFECTIVENESS FORMULAS BY CONFIGURATION |
  • | |
  • | Configuration Capacity Ratio (Cr) Effectiveness Formula (epsilon) |
  • | --------------------- ------------------- ----------------------------------- |
  • | All Exchangers (Boiler/ C_r = 0 epsilon = 1 - exp( -NTU ) |
  • | Condenser phase change) (C_max -> infinity) |
  • | Counter Flow C_r = 1 (Balanced) epsilon = NTU / (1 + NTU) |
  • | Parallel Flow C_r = 1 epsilon = [ 1 - exp(-2*NTU) ] / 2 |
  • | Counter Flow (General) 0 < C_r < 1 epsilon = [1 - exp(-NTU*(1-Cr))] / |
  • | [1 - Cr*exp(-NTU*(1-Cr))] |
  • +-----------------------------------------------------------------------------------------+
  • 9. Step-by-Step Worked Problems: Heat Exchanger Design & Radiation Enclosures
  • Worked Example 1: Mining Compressor Intercooler Sizing via ϵ -NTU \epsilon\text{-NTU} ϵ -NTU

An air compressor intercooler operates in counter-flow to cool compressed air from T h , in = 140 ∘ C T_{h,\text{in}} = 140^{\circ}\text{C} T h , in ​ = 14 0 ∘ C to T h , out = 40 ∘ C T_{h,\text{out}} = 40^{\circ}\text{C} T h , out ​ = 4 0 ∘ C using cooling water entering at T c , in = 20 ∘ C T_{c,\text{in}} = 20^{\circ}\text{C} T c , in ​ = 2 0 ∘ C . The heat capacity rate of air is C h = 2.0 kW/K C_h = 2.0\text{ kW/K} C h ​ = 2.0 kW/K and cooling water is C c = 4.0 kW/K C_c = 4.0\text{ kW/K} C c ​ = 4.0 kW/K . The overall heat transfer coefficient is U = 250 W/m 2 ⋅ K U = 250\text{ W/m}^2\cdot\text{K} U = 250 W/m 2 ⋅ K . Calculate the required heat transfer surface area A A A . +-----------------------------------------------------------------------------------------+

  • | INTERCOOLER SIZING CALCULATION STEPS |
  • | |
  • | STEP 1: Determine Capacity Rates and Ratio |
  • | C_min = C_h = 2.0 kW/K = 2000 W/K |
  • | C_max = C_c = 4.0 kW/K = 4000 W/K |
  • | C_r = C_min / C_max = 2000 / 4000 = 0.50 |
  • | |
  • | STEP 2: Calculate Actual Heat Transfer Rate |
  • | Q_act = C_h * (T_h,in - T_h,out) = 2.0 kW/K * (140 - 40) = 200 kW |
  • | |
  • | STEP 3: Calculate Maximum Possible Heat Transfer & Effectiveness |
  • | Q_max = C_min * (T_h,in - T_c,in) = 2.0 kW/K * (140 - 20) = 240 kW |
  • | epsilon = Q_act / Q_max = 200 / 240 = 0.8333 (83.33%) |
  • | |
  • | STEP 4: Solve for NTU for Counter Flow (Cr = 0.50, epsilon = 0.8333) |
  • | NTU = [ 1 / (1 - C_r) ] * ln[ (1 - epsilon*C_r) / (1 - epsilon) ] |
  • | NTU = [ 1 / 0.50 ] * ln[ (1 - 0.8333*0.50) / (1 - 0.8333) ] |
  • | NTU = 2.0 * ln[ (1 - 0.41667) / 0.16667 ] = 2.0 * ln[ 0.58333 / 0.16667 ] |
  • | NTU = 2.0 * ln(3.50) = 2.0 * 1.25276 = 2.5055 |
  • | |
  • | STEP 5: Calculate Area A |
  • | NTU = U*A / C_min ===> A = (NTU * C_min) / U |
  • | A = (2.5055 * 2000 W/K) / (250 W/m^2*K) = 5011 / 250 = 20.04 m^2 |
  • +-----------------------------------------------------------------------------------------+