Study guide
13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
Key Takeaways Explain This Topic AI
Vapour and gas refrigeration and heat pump cycles are named together in the Refrigeration and air-conditioning item of the CIL Mechanical Paper-II syllabus.
The reversed Carnot cycle sets the maximum possible coefficient of performance, equal to the cold temperature divided by the temperature difference for a refrigerator.
The COP of a heat pump always exceeds that of a refrigerator operating between the same temperatures by exactly one.
The Bell-Coleman or reversed Brayton gas cycle has a much lower COP than vapour compression but is used in aircraft because the working fluid is free and the plant is light.
Last updated: August 2026
The Reversed Carnot Cycle: The Absolute Limit
Every refrigeration system is a heat engine run backwards: work is supplied to move heat from a cold reservoir at T L T_L T L to a hot reservoir at T H T_H T H . The best possible performance is set by the reversed Carnot cycle.
Coefficient of performance is defined as the useful effect divided by the work input, and the definition of useful effect differs between the two applications: Refrigerator: C O P R = Q L W = T L T H − T L \text{Refrigerator: } COP_R = \frac{Q_L}{W} = \frac{T_L}{T_H - T_L} Refrigerator: CO P R = W Q L = T H − T L T L Heat pump: C O P H P = Q H W = T H T H − T L \text{Heat pump: } COP_{HP} = \frac{Q_H}{W} = \frac{T_H}{T_H - T_L} Heat pump: CO P H P = W Q H = T H − T L T H
Since Q H = Q L + W Q_H = Q_L + W Q H = Q L + W , the two are related by C O P H P = C O P R + 1 \boxed{COP_{HP} = COP_R + 1} CO P H P = CO P R + 1
This relation holds for any refrigeration system, not merely the Carnot one, and it is examined constantly. A heat pump is always "better" than a refrigerator by exactly one — not because it is a superior machine, but because the work input itself ends up as useful heat in the hot space.
Note also that COP is not an efficiency and routinely exceeds one. Quoting a COP as a percentage is a conceptual error.
Worked example
A refrigerator maintains − 10 -10 − 10 degrees Celsius while rejecting heat at 40 degrees Celsius. The maximum possible COP is C O P R = 263 313 − 263 = 263 50 = 5.26 COP_R = \frac{263}{313 - 263} = \frac{263}{50} = 5.26 CO P R = 313 − 263 263 = 50 263 = 5.26
A heat pump between the same reservoirs would have C O P H P = 6.26 COP_{HP} = 6.26 CO P H P = 6.26 . Note that temperatures must be absolute ; using Celsius here would give a meaningless answer, which is the single commonest error in the topic.
The COP falls sharply as the temperature difference widens. Cooling to − 30 -30 − 30 degrees Celsius while rejecting at the same 40 gives C O P R = 243 / 70 = 3.47 COP_R = 243/70 = 3.47 CO P R = 243/70 = 3.47 — a third lower. This is why cold-storage design pays such attention to minimising the temperature lift.
Units of Refrigeration
One tonne of refrigeration is the rate of heat removal required to freeze one short ton of water at 0 degrees Celsius into ice at 0 degrees Celsius in 24 hours: 1 TR = 3.5 kW ≈ 211 kJ/min 1 \text{ TR} = 3.5 \text{ kW} \approx 211 \text{ kJ/min} 1 TR = 3.5 kW ≈ 211 kJ/min
The Bell-Coleman (Reversed Brayton) Cycle
Where vapour compression uses a fluid that changes phase, the gas refrigeration cycle keeps the working fluid — normally air — in the gaseous phase throughout. It is the Brayton cycle run in reverse and comprises four processes:
- Process Description
- 1-2 Isentropic compression in the compressor
- 2-3 Constant-pressure heat rejection in the cooler
- 3-4 Isentropic expansion in an expander
- 4-1 Constant-pressure heat absorption in the refrigerator
The critical difference from vapour compression is that expansion occurs in an expander that recovers work , not through a throttle valve. Throttling a gas produces almost no cooling — as the Joule-Thomson analysis showed, an ideal gas does not cool on throttling at all — so an expansion machine is essential.
With r p r_p r p the pressure ratio, the COP of the ideal cycle is C O P = 1 r p ( γ − 1 ) / γ − 1 COP = \frac{1}{r_p^{(\gamma-1)/\gamma} - 1} COP = r p ( γ − 1 ) / γ − 1 1
Equivalently, in terms of temperatures, C O P = T 1 − T 4 ( T 2 − T 3 ) − ( T 1 − T 4 ) COP = \frac{T_1 - T_4}{(T_2 - T_3) - (T_1 - T_4)} COP = ( T 2 − T 3 ) − ( T 1 − T 4 ) T 1 − T 4
Comparison with vapour compression
- Feature Vapour compression Bell-Coleman gas cycle
- Working fluid Refrigerant, changes phase Air, stays gaseous
- Heat transfer Latent heat; large per kg Sensible heat only; small per kg
- COP Typically 3 to 5 Typically 0.7 to 1.5
- Equipment mass per TR Higher Much lower
- Expansion device Throttle valve Expander (work-recovering)
The COP is poor because sensible heat capacity is far smaller than latent heat, so a large mass flow of air is needed for a given cooling duty. Yet the cycle survives in aircraft, where the working fluid is available free from the engine compressor, no refrigerant charge or leakage is possible, and the weight per tonne of refrigeration is far lower than any vapour-compression plant.
Aircraft Refrigeration Systems
Aircraft cabins need cooling even at altitude because ram air compression, avionics and solar gain generate substantial heat, while bleed air from the engine compressor arrives very hot. Standard configurations, in increasing sophistication:
- System Description
- Simple Ram air compressed, cooled in a heat exchanger, expanded in a cooling turbine
- Bootstrap Adds a second compressor driven by the cooling turbine, with a secondary heat exchanger
- Regenerative Part of the cooled turbine discharge is used to pre-cool the air entering the turbine
- Reduced ambient Uses a separate expansion turbine to lower the cooling-medium temperature
The bootstrap arrangement is the most common on commercial aircraft, because using the turbine output to drive a second compressor rather than wasting it improves the overall pressure ratio available for expansion.
Heat Pumps
A heat pump is thermodynamically identical to a refrigerator; only the useful effect differs. Where the ambient is the source and a building is the sink, the pump delivers Q H Q_H Q H units of heat for every W W W units of work, with C O P H P = Q H / W COP_{HP} = Q_H/W CO P H P = Q H / W typically 3 to 4 in temperate conditions.
The engineering significance is that direct electric heating delivers one unit of heat per unit of electricity, while a heat pump delivers three or four. Heat pumps are therefore the most effective route to decarbonised space heating wherever the temperature lift is modest.
Performance falls as source temperature drops, because the lift T H − T L T_H - T_L T H − T L widens. Ground-source heat pumps exploit the near-constant ground temperature below a few metres to keep the lift small year-round, at the cost of borehole or trench installation.
A reversible heat pump switches the roles of the two heat exchangers with a four-way valve, giving cooling in summer and heating in winter from one machine — the basis of the reverse-cycle air conditioner.
Cryogenics and Gas Liquefaction
Cryogenics concerns temperatures below about 123 K. Producing them requires a different approach, because no single cycle spans from ambient to a few kelvin.
- Gas Normal boiling point
- Ammonia 240 K
- Carbon dioxide (sublimes) 195 K
- Methane 112 K
- Oxygen 90 K
- Nitrogen 77 K
- Hydrogen 20 K
- Helium 4.2 K
- The Linde-Hampson process
Gas is compressed, cooled to ambient, passed through a counter-current heat exchanger , then throttled. The throttling produces cooling only if the gas is below its inversion temperature, as established in the thermodynamic-relations section. The cooled gas returns through the heat exchanger, pre-cooling the incoming stream, so the system cascades down to progressively lower temperatures until liquefaction begins.
Air and nitrogen work directly because they sit well below their inversion temperatures at ambient. Hydrogen must be pre-cooled with liquid nitrogen and helium with liquid hydrogen before throttling produces any cooling at all.
The Claude process
An improvement in which part of the stream is diverted through an expansion engine rather than a throttle. Because the expander extracts work, the temperature drop is much greater than in throttling alone, and the process is thermodynamically far more efficient. Most industrial air-separation plants use this principle.
Industrial relevance
Cryogenic air separation produces the oxygen and nitrogen used in steelmaking and in inerting; liquefied natural gas transport depends on cryogenic containment; and in coal operations, nitrogen is used for inertisation of sealed-off districts to suppress spontaneous heating and mine fires — a direct link between this topic and mine safety practice.