Study guide

10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

Key Takeaways Explain This Topic AI

Brakes and clutches are named in the machine-element design bullet of the CIL Mechanical Paper-II syllabus, separately from the friction mechanics in Engineering Mechanics.

Brake and clutch design is usually limited by heat dissipation rather than by torque capacity, because all the absorbed energy appears as heat at the friction surface.

The pv value, the product of lining pressure and rubbing velocity, is the standard proxy for heat generation per unit area and is the governing limit for a friction lining.

An internal expanding shoe brake has one leading self-energising shoe and one trailing shoe, so the two shoes develop different braking torques from the same actuating force.

Last updated: August 2026

The Design Question

The friction analysis developed in the Engineering Mechanics chapter gives the braking torque a device can generate. Design asks two further questions:

How much energy must be absorbed, and how fast?

Can the friction surface survive the resulting temperature and pressure?

For mining equipment the second usually governs. A haul truck descending a long pit ramp dissipates enormous energy continuously, and it is thermal capacity, not torque capacity, that limits the design.

Energy to Be Absorbed

  • Situation Energy
  • Stopping a translating mass from speed v v v 1 2 M v 2 \tfrac{1}{2}Mv^2 2 1 ​ M v 2
  • Stopping a rotating mass from ω \omega ω 1 2 I ω 2 \tfrac{1}{2}I\omega^2 2 1 ​ I ω 2
  • Lowering a load through height h h h M g h Mgh M g h
  • Descending a gradient at constant speed M g v sin ⁡ α Mgv\sin\alpha M gv sin α per unit time

The last row is a power , not an energy, and it never ends while the descent continues — the reason retarders exist. For a 100-tonne loaded hauler descending a 1-in-10 grade at 5 m/s: P = 100000 × 9.81 × 5 × 0.1 = 490 kW P = 100000\times9.81\times5\times0.1 = 490 \text{ kW} P = 100000 × 9.81 × 5 × 0.1 = 490 kW

Dissipating half a megawatt continuously through friction linings is not feasible, which is why large mine trucks use dynamic or hydraulic retarders and reserve friction brakes for final stopping and parking.

Heat Generation and the pv Value

Heat generated per unit area of lining per unit time is Heat area ⋅ time = μ p v \frac{\text{Heat}}{\text{area}\cdot\text{time}} = \mu\,p\,v area ⋅ time Heat ​ = μ p v

Since μ \mu μ varies little for a given lining, the product p v pv p v — lining pressure times rubbing velocity — is the standard design proxy. Manufacturers quote a permissible p v pv p v for each material, and the design must satisfy p v ≤ ( p v ) allowable p\,v \leq (pv)_{\text{allowable}} p v ≤ ( p v ) allowable ​

as well as separate limits on p p p alone (to avoid crushing the lining) and v v v alone (to avoid disintegration).

Friction materials

  • Lining material μ \mu μ (dry) Max temperature Notes
  • Cast iron on cast iron 0.15 - 0.20 ~300 C Cheap; poor at high temperature
  • Woven asbestos substitute 0.35 - 0.40 ~250 C Flexible; band brakes
  • Moulded / sintered 0.30 - 0.40 ~350 C Rigid blocks and pads
  • Sintered metal (cermet) 0.25 - 0.35 > 500 C Heavy duty; mine hoists, presses
  • Cork, leather on metal 0.30 - 0.35 ~100 C Light duty, wet clutches

Running wet in oil roughly halves the coefficient of friction but greatly improves heat removal and lining life, which is why heavy earth moving machinery favours oil-immersed multi-plate brakes and clutches.

Temperature Rise

For a single stop, assuming all heat is absorbed by the drum or disc of mass m m m and specific heat c c c : Δ T = E m c \Delta T = \frac{E}{m\,c} Δ T = m c E ​

For repeated or continuous braking, heat must be rejected as fast as it is generated: E rate = C A Δ T E_{\text{rate}} = C\,A\,\Delta T E rate ​ = C A Δ T

where C C C is the heat dissipation coefficient in watts per square metre per degree and A A A the exposed surface area. Typical values of C C C range from about 30 W/m 2 ^2 2 K in still air to 100 or more with forced ventilation — which is the entire reason disc brakes are ventilated and drums are finned.

Internal Expanding Shoe Brake

This is the classic drum brake of vehicles and hoists. Two shoes pivot inside the drum and are forced outward by a cam or hydraulic cylinder.

Leading and trailing shoes

The key design feature is that the two shoes behave differently under the same actuating force.

Shoe Friction moment about the pivot Effect

Leading (primary) Acts in the same sense as the applied force Self-energising : friction increases the normal force, so braking torque is amplified

Trailing (secondary) Acts in the opposite sense Self-de-energising: friction reduces the normal force

For a shoe with actuating force F F F at distance a a a from the pivot, normal force moment arm b b b , and friction moment arm c c c : N leading = F a b − μ c , N trailing = F a b + μ c N_{\text{leading}} = \frac{F a}{b - \mu c}, \qquad N_{\text{trailing}} = \frac{F a}{b + \mu c} N leading ​ = b − μ c F a ​ , N trailing ​ = b + μ c F a ​

The leading shoe therefore produces substantially more torque. If μ c ≥ b \mu c \geq b μ c ≥ b , the denominator vanishes or reverses and the brake becomes self-locking — it grips without any applied force. That is catastrophic in a service brake and is deliberately avoided by keeping b > μ c b > \mu c b > μ c with margin, since μ \mu μ rises when linings are cold or wet.

A brake with both shoes leading (two separate actuators) gives high torque in one direction of rotation but very little in the other. A leading-trailing arrangement gives equal performance in both directions, which is why it is used on rear axles and on hoists that must hold in either direction.

Pressure distribution

For a shoe with a lining subtending angle 2 θ 2\theta 2 θ , the normal pressure varies as p = p max ⁡ sin ⁡ θ sin ⁡ θ max ⁡ p = p_{\max}\frac{\sin\theta}{\sin\theta_{\max}} p = p m a x ​ sin θ m a x ​ sin θ ​

so the maximum pressure occurs where the shoe is furthest from the pivot, not at the middle of the lining. Integrating this distribution gives the braking torque, and the peak pressure must be checked against the lining limit.

Disc Brakes

A disc or caliper brake clamps annular pads against both faces of a rotating disc. Using the uniform-wear assumption, the braking torque for n n n friction surfaces is T = n μ F R m , R m = R o + R i 2 T = n\,\mu\,F\,R_m, \qquad R_m = \frac{R_o + R_i}{2} T = n μ F R m ​ , R m ​ = 2 R o ​ + R i ​ ​

Advantages over drum brakes are decisive for heavy duty: both faces are exposed for cooling, thermal expansion moves the disc towards the pads rather than away (so there is no brake fade from expansion), water is thrown off by rotation, and the design is not self-energising , which makes the response linear and predictable. The price is a higher required actuating force, met with hydraulic assistance.

  • Clutch Design
  • Sizing

Starting from the torque relations derived earlier — uniform wear giving T = n μ W R m T = n\mu W R_m T = n μ W R m ​ — the design procedure runs:

Compute the torque to be transmitted, including a service factor of 1.5 to 3 for shock loads.

Choose a lining material and its permissible pressure p a p_a p a ​ .

Choose a radius ratio. For maximum torque from a given outer radius, the optimum is R i = R o 3 ≈ 0.577 R o R_i = \frac{R_o}{\sqrt3} \approx 0.577\,R_o R i ​ = 3 ​ R o ​ ​ ≈ 0.577 R o ​

In practice R i / R o R_i/R_o R i ​ / R o ​ between 0.5 and 0.7 is used.

4. Compute the axial force from W = 2 π p a R i ( R o − R i ) W = 2\pi p_a R_i (R_o - R_i) W = 2 π p a ​ R i ​ ( R o ​ − R i ​ ) under uniform wear, noting that peak pressure occurs at the inner radius.

5. Check the number of plates required, then check heat.

Engagement heat

During engagement the two sides slip, and the energy dissipated is E = I 1 I 2 2 ( I 1 + I 2 ) ( ω 1 − ω 2 ) 2 E = \frac{I_1 I_2}{2(I_1 + I_2)}\left(\omega_1 - \omega_2\right)^2 E = 2 ( I 1 ​ + I 2 ​ ) I 1 ​ I 2 ​ ​ ( ω 1 ​ − ω 2 ​ ) 2

This is independent of how long the engagement takes, and it is why frequently cycled clutches — in a shovel swing drive, for example — need far more thermal capacity than their steady torque rating alone would suggest.

Selection guide

  • Type Application
  • Single plate, dry Automotive, light machinery
  • Multi-plate, wet Compact, high torque, heavy earth moving machinery
  • Cone Simple, high torque from low axial force
  • Centrifugal Automatic engagement above a set speed
  • Electromagnetic Remote and rapid actuation
  • Fluid coupling No wear surfaces; smooth start of large conveyor drives

The fluid coupling is worth noting for a coal context: long overland conveyors start under enormous inertia, and a fluid coupling allows the motor to reach speed before load is progressively applied, avoiding both belt damage and motor stalling.