Study guide

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium

Key Takeaways Explain This Topic AI

Crystal unit cells (SC, BCC, FCC, HCP) exhibit distinct Atomic Packing Factors (0.524, 0.680, 0.740, 0.740) and coordination numbers (6, 8, 12, 12) governing interstitial void geometry and slip behavior.

The condensed Gibbs Phase Rule (P + F = C + 1 at constant 1 atm pressure) yields zero degrees of freedom (F = 0) at invariant isothermal reaction points in binary systems.

The Fe-Fe3C equilibrium system features three pivotal invariant reactions: Peritectic at 1495 °C (0.17% C), Eutectic at 1147 °C (4.30% C, forming Ledeburite), and Eutectoid at 727 °C (0.77% C, forming Pearlite).

The Lever Rule enables quantitative computation of equilibrium phase fractions and proeutectoid versus pearlite microconstituent distributions across hypoeutectoid and hypereutectoid steels.

Last updated: August 2026

13.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium

Understanding the atomic architecture of crystalline solids and the thermodynamic principles governing phase transformations is fundamental to materials science and mechanical engineering. In industrial applications—ranging from heavy mining machinery in Coal India Limited (CIL) operations to high-pressure thermal power equipment—the mechanical properties (tensile strength, ductility, hardness, and fracture toughness) of metallic components are directly dictated by their underlying crystal structures and equilibrium microconstituents.

1. Crystallography & Metallic Unit Cells

Metals solidify into long-range, periodic three-dimensional arrays of atoms termed crystal lattices . The smallest repeating geometric entity that completely describes the symmetry and atomic positions of the entire crystal is the unit cell .

Fundamental Crystallographic Parameters

Coordination Number (CN): The number of nearest neighboring atoms in direct physical contact with a central atom within the crystal lattice.

Atomic Packing Factor (APF): The volumetric fraction of solid sphere atoms occupying the total unit cell volume: APF = N atoms × V atom V unit cell = N atoms × ( 4 3 π r 3 ) V unit cell \text{APF} = \frac{N_{\text{atoms}} \times V_{\text{atom}}}{V_{\text{unit cell}}} = \frac{N_{\text{atoms}} \times \left(\frac{4}{3}\pi r^3\right)}{V_{\text{unit cell}}} APF = V unit cell ​ N atoms ​ × V atom ​ ​ = V unit cell ​ N atoms ​ × ( 3 4 ​ π r 3 ) ​

where N atoms N_{\text{atoms}} N atoms ​ is the effective number of lattice atoms belonging exclusively to one unit cell, and r r r is the atomic radius. Simple Cubic (SC) Body-Centered Cubic (BCC) Face-Centered Cubic (FCC)

  • +-------+ +-------+ +-------+
  • /| /| /| (•) /| /| (•) /|
  • +-------+ | +-------+ | +-------+ |
  • | | | | | | (•) | | | |(•)(•| |
  • | +-----|-+ | +-----|-+ | +-----|-+
  • |/ |/ |/ |/ |/ (•) |/
  • +-------+ +-------+ +-------+
  • Atoms: 8×(1/8) = 1 Atoms: 8×(1/8)+1 = 2 Atoms: 8×(1/8)+6×(1/2) = 4
  • Coord No: 6 Coord No: 8 Coord No: 12
  • APF: 0.524 APF: 0.680 APF: 0.740
  • Comparative Analysis of Metallic Unit Cells

Crystal Structure Effective Atoms per Cell ( N atoms N_{\text{atoms}} N atoms ​ ) Lattice Parameter Relation ( a a a ) Coordination Number (CN) Atomic Packing Factor (APF) Common Engineering Metals

Simple Cubic (SC) 8 × 1 8 = 1 8 \times \frac{1}{8} = 1 8 × 8 1 ​ = 1 a = 2 r a = 2r a = 2 r 6 π 6 ≈ 0.524 \frac{\pi}{6} \approx 0.524 6 π ​ ≈ 0.524 Polonium ( α \alpha α -Po)

Body-Centered Cubic (BCC) ( 8 × 1 8 ) + 1 = 2 \left(8 \times \frac{1}{8}\right) + 1 = 2 ( 8 × 8 1 ​ ) + 1 = 2 a = 4 r 3 a = \frac{4r}{\sqrt{3}} a = 3 ​ 4 r ​ 8 3 π 8 ≈ 0.680 \frac{\sqrt{3}\pi}{8} \approx 0.680 8 3 ​ π ​ ≈ 0.680 α \alpha α -Fe, Cr, W, Mo, V, Na

Face-Centered Cubic (FCC) ( 8 × 1 8 ) + ( 6 × 1 2 ) = 4 \left(8 \times \frac{1}{8}\right) + \left(6 \times \frac{1}{2}\right) = 4 ( 8 × 8 1 ​ ) + ( 6 × 2 1 ​ ) = 4 a = 4 r 2 = 2 2 r a = \frac{4r}{\sqrt{2}} = 2\sqrt{2}r a = 2 ​ 4 r ​ = 2 2 ​ r 12 2 π 6 ≈ 0.740 \frac{\sqrt{2}\pi}{6} \approx 0.740 6 2 ​ π ​ ≈ 0.740 γ \gamma γ -Fe, Al, Cu, Ni, Au, Ag, Pb

Hexagonal Close-Packed (HCP) ( 12 × 1 6 ) + ( 2 × 1 2 ) + 3 = 6 \left(12 \times \frac{1}{6}\right) + \left(2 \times \frac{1}{2}\right) + 3 = 6 ( 12 × 6 1 ​ ) + ( 2 × 2 1 ​ ) + 3 = 6 a = 2 r , c a = 8 3 ≈ 1.633 a = 2r, \; \frac{c}{a} = \sqrt{\frac{8}{3}} \approx 1.633 a = 2 r , a c ​ = 3 8 ​ ​ ≈ 1.633 12 π 3 2 ≈ 0.740 \frac{\pi}{3\sqrt{2}} \approx 0.740 3 2 ​ π ​ ≈ 0.740 Zn, Mg, Ti ( α \alpha α ), Cd, Zr

Interstitial Voids & Carbon Solubility in Iron

A critical metallurgical paradox frequently tested in technical recruitment exams is why FCC austenite ( γ \gamma γ -Fe) dissolves up to 2.11 wt% Carbon at 1147 °C, whereas BCC ferrite ( α \alpha α -Fe) dissolves a maximum of only 0.022 wt% Carbon at 727 °C, even though BCC is more loosely packed ( APF = 0.680 \text{APF} = 0.680 APF = 0.680 ) than FCC ( APF = 0.740 \text{APF} = 0.740 APF = 0.740 ):

In FCC (Austenite): The interstitial voids are large, symmetric octahedral sites located at the unit cell center ( 1 2 , 1 2 , 1 2 ) \left(\frac{1}{2}, \frac{1}{2}, \frac{1}{2}\right) ( 2 1 ​ , 2 1 ​ , 2 1 ​ ) and edge midpoints ( 1 2 , 0 , 0 ) \left(\frac{1}{2}, 0, 0\right) ( 2 1 ​ , 0 , 0 ) . The maximum sphere radius that fits without lattice distortion is: r oct, FCC = ( 2 − 1 ) r Fe ≈ 0.414 r Fe ≈ 0.053 nm r_{\text{oct, FCC}} = (\sqrt{2} - 1)r_{\text{Fe}} \approx 0.414 r_{\text{Fe}} \approx 0.053\text{ nm} r oct, FCC ​ = ( 2 ​ − 1 ) r Fe ​ ≈ 0.414 r Fe ​ ≈ 0.053 nm

In BCC (Ferrite): The octahedral voids are situated at face centers ( 1 2 , 1 2 , 0 ) \left(\frac{1}{2}, \frac{1}{2}, 0\right) ( 2 1 ​ , 2 1 ​ , 0 ) and edge midpoints ( 1 2 , 0 , 0 ) \left(\frac{1}{2}, 0, 0\right) ( 2 1 ​ , 0 , 0 ) . These sites are highly asymmetric (squashed along one axis), offering an opening radius of only: r oct, BCC = ( 2 3 − 1 ) r Fe ≈ 0.154 r Fe ≈ 0.019 nm r_{\text{oct, BCC}} = \left(\frac{2}{\sqrt{3}} - 1\right)r_{\text{Fe}} \approx 0.154 r_{\text{Fe}} \approx 0.019\text{ nm} r oct, BCC ​ = ( 3 ​ 2 ​ − 1 ) r Fe ​ ≈ 0.154 r Fe ​ ≈ 0.019 nm

Because a carbon interstitial atom has an atomic radius r C ≈ 0.071 nm r_{\text{C}} \approx 0.071\text{ nm} r C ​ ≈ 0.071 nm , forcing carbon into BCC ferrite produces severe tetragonal strain, limiting its maximum equilibrium solid solubility to a minute 0.022 wt% 0.022\text{ wt\%} 0.022 wt% .

2. Thermodynamics of Phase Equilibria & Gibbs Phase Rule

A phase is a physically homogeneous, structurally distinct, and mechanically separable portion of a material system. In 1876, J. Willard Gibbs formulated the fundamental thermodynamic criterion for multi-component, heterogeneous equilibrium: P + F = C + 2 P + F = C + 2 P + F = C + 2

where:

P P P = Number of equilibrium phases present simultaneously.

F F F = Degrees of freedom (variance), representing the number of independent intensive variables (temperature, pressure, composition) that can be varied without altering the number of equilibrium phases.

C C C = Number of chemically independent components in the system.

Condensed Phase Rule for Metallurgical Systems

Because solid-state and liquid-state metallurgical transformations occur at constant atmospheric pressure ( 1 atm 1\text{ atm} 1 atm ), the pressure variable is fixed, eliminating one degree of freedom. The condensed (isobaric) Gibbs Phase Rule applies: P + F = C + 1 P + F = C + 1 P + F = C + 1

For a binary alloy system ( C = 2 C = 2 C = 2 , e.g., Iron-Carbon): P + F = 2 + 1 = 3 ⟹ F = 3 − P P + F = 2 + 1 = 3 \implies F = 3 - P P + F = 2 + 1 = 3 ⟹ F = 3 − P

In a single-phase field ( P = 1 P = 1 P = 1 ): F = 2 F = 2 F = 2 (Both temperature and alloy composition can vary independently).

In a two-phase field ( P = 2 P = 2 P = 2 ): F = 1 F = 1 F = 1 (Specifying temperature automatically locks the equilibrium compositions of both coexisting phases along tie-lines).

At an invariant point ( P = 3 P = 3 P = 3 ): F = 0 F = 0 F = 0 (Three phases coexist in equilibrium at a single fixed temperature and invariant composition).

3. The Iron-Iron Carbide ( Fe-Fe 3 C \text{Fe-Fe}_3\text{C} Fe-Fe 3 ​ C ) Equilibrium Phase Diagram

Pure elemental iron exhibits allotropy (polymorphism), undergoing reversible crystallographic phase changes upon heating: α -Fe (BCC) → 912 ∘ C γ -Fe (FCC) → 1394 ∘ C δ -Fe (BCC) → 1538 ∘ C Liquid Fe \alpha\text{-Fe (BCC)} \xrightarrow{912^{\circ}\text{C}} \gamma\text{-Fe (FCC)} \xrightarrow{1394^{\circ}\text{C}} \delta\text{-Fe (BCC)} \xrightarrow{1538^{\circ}\text{C}} \text{Liquid Fe} α -Fe (BCC) 91 2 ∘ C ​ γ -Fe (FCC) 139 4 ∘ C ​ δ -Fe (BCC) 153 8 ∘ C ​ Liquid Fe

(Note: α \alpha α -ferrite is ferromagnetic up to its Curie temperature A 2 = 768 ∘ C A_2 = 768^{\circ}\text{C} A 2 ​ = 76 8 ∘ C , becoming paramagnetic above 768 ∘ C 768^{\circ}\text{C} 76 8 ∘ C without structural change). Temperature (°C)

  • 1538°C +----------------------------------------+
  • 1495°C | L + δ | Liquid (L) |
  • |---------+ |
  • | δ+γ | γ (Austenite) + Liquid |
  • 1147°C +-----+----------------------------------+ <--- Eutectic (1147°C, 4.30% C)
  • | | | Liquid -> Austenite + Fe3C
  • | γ | Austenite (γ) + Cementite | (Ledeburite)
  • | | |
  • 912°C +-----+ |
  • |α+γ /| |
  • 727°C +---+-+----------------------------------+ <--- Eutectoid (727°C, 0.77% C)
  • (A1) | α | | Austenite -> Ferrite + Fe3C
  • |---| Ferrite (α) + Cementite (Fe3C) | (Pearlite)
  • |α+Fe3C |
  • 0°C +---+------------------------------------+
  • 0.022% C 0.77% C 2.11% C 4.30% C 6.67% C
  • (Pure Fe) (Eutectoid) (Max Steel) (Eutectic) (Cementite)
  • The Three Invariant Isothermal Reactions

Invariant Reaction Invariant Temperature Reaction Equation & Phase Compositions Resulting Microconstituent / Structure

Peritectic Reaction 1495 ∘ C 1495^{\circ}\text{C} 149 5 ∘ C Liquid ( 0.53 % C ) + δ -Ferrite ( 0.09 % C ) → 1495 ∘ C γ -Austenite ( 0.17 % C ) \text{Liquid } (0.53\%\text{ C}) + \delta\text{-Ferrite } (0.09\%\text{ C}) \xrightarrow{1495^{\circ}\text{C}} \gamma\text{-Austenite } (0.17\%\text{ C}) Liquid ( 0.53% C ) + δ -Ferrite ( 0.09% C ) 149 5 ∘ C ​ γ -Austenite ( 0.17% C ) High-temperature solid Austenite ( γ \gamma γ )

Eutectic Reaction 1147 ∘ C 1147^{\circ}\text{C} 114 7 ∘ C Liquid ( 4.30 % C ) → 1147 ∘ C γ -Austenite ( 2.11 % C ) + Cementite Fe 3 C ( 6.67 % C ) \text{Liquid } (4.30\%\text{ C}) \xrightarrow{1147^{\circ}\text{C}} \gamma\text{-Austenite } (2.11\%\text{ C}) + \text{Cementite } \text{Fe}_3\text{C } (6.67\%\text{ C}) Liquid ( 4.30% C ) 114 7 ∘ C ​ γ -Austenite ( 2.11% C ) + Cementite Fe 3 ​ C ( 6.67% C ) Ledeburite (intimate eutectic mixture)

Eutectoid Reaction 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C ( A 1 A_1 A 1 ​ ) γ -Austenite ( 0.77 % C ) → 727 ∘ C α -Ferrite ( 0.022 % C ) + Cementite Fe 3 C ( 6.67 % C ) \gamma\text{-Austenite } (0.77\%\text{ C}) \xrightarrow{727^{\circ}\text{C}} \alpha\text{-Ferrite } (0.022\%\text{ C}) + \text{Cementite } \text{Fe}_3\text{C } (6.67\%\text{ C}) γ -Austenite ( 0.77% C ) 72 7 ∘ C ​ α -Ferrite ( 0.022% C ) + Cementite Fe 3 ​ C ( 6.67% C ) Pearlite (alternating lamellae of α \alpha α and Fe 3 C \text{Fe}_3\text{C} Fe 3 ​ C )

Critical Transformation Lines & Designations

A 1 A_1 A 1 ​ Line ( 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C ): Lower critical temperature line. Below A 1 A_1 A 1 ​ , all austenite decomposes into ferrite and cementite under equilibrium cooling.

A 3 A_3 A 3 ​ Line ( 912 ∘ C → 727 ∘ C 912^{\circ}\text{C} \to 727^{\circ}\text{C} 91 2 ∘ C → 72 7 ∘ C ): Upper critical temperature line for hypoeutectoid steels ( < 0.77 % C <0.77\%\text{ C} < 0.77% C ). Represents the onset of proeutectoid ferrite separation from austenite.

A cm A_{\text{cm}} A cm ​ Line ( 727 ∘ C → 1147 ∘ C 727^{\circ}\text{C} \to 1147^{\circ}\text{C} 72 7 ∘ C → 114 7 ∘ C ): Upper critical line for hypereutectoid steels ( 0.77 % to 2.11 % C 0.77\% \text{ to } 2.11\%\text{ C} 0.77% to 2.11% C ). Represents the solubility limit of carbon in austenite, above which proeutectoid cementite precipitates along austenite grain boundaries.

A 2 A_2 A 2 ​ Line ( 768 ∘ C 768^{\circ}\text{C} 76 8 ∘ C ): Magnetic transition line (Curie temperature of α \alpha α -ferrite).

A 4 A_4 A 4 ​ Line ( 1394 ∘ C → 1495 ∘ C 1394^{\circ}\text{C} \to 1495^{\circ}\text{C} 139 4 ∘ C → 149 5 ∘ C ): Allotropic transformation line between γ \gamma γ -austenite and δ \delta δ -ferrite.

4. Quantitative Phase Calculations: The Lever Rule

Within any two-phase equilibrium region bounded by phase boundaries at a given temperature, a horizontal tie-line is constructed. The overall alloy composition C 0 C_0 C 0 ​ divides the tie-line into two segments. The mass fraction of each phase is inversely proportional to the length of the adjacent tie-line segment. Mass Fraction of Phase α : W α = C β − C 0 C β − C α \text{Mass Fraction of Phase } \alpha: \quad W_{\alpha} = \frac{C_{\beta} - C_0}{C_{\beta} - C_{\alpha}} Mass Fraction of Phase α : W α ​ = C β ​ − C α ​ C β ​ − C 0 ​ ​ Mass Fraction of Phase β : W β = C 0 − C α C β − C α \text{Mass Fraction of Phase } \beta: \quad W_{\beta} = \frac{C_0 - C_{\alpha}}{C_{\beta} - C_{\alpha}} Mass Fraction of Phase β : W β ​ = C β ​ − C α ​ C 0 ​ − C α ​ ​

Worked Step-by-Step Numerical Example

Problem: Consider a plain carbon steel containing 0.45 wt% C 0.45\text{ wt\% C} 0.45 wt% C (AISI 1045 medium carbon steel) slowly cooled under equilibrium conditions to just below the eutectoid temperature ( 727 ∘ C − Δ T 727^{\circ}\text{C} - \Delta T 72 7 ∘ C − Δ T ). Calculate:

The total mass fraction of ferrite ( α \alpha α ) and cementite ( Fe 3 C \text{Fe}_3\text{C} Fe 3 ​ C ).

The mass fraction of proeutectoid ferrite ( α pro \alpha_{\text{pro}} α pro ​ ) and eutectoid pearlite ( P P P ).

Step 1: Total equilibrium phase fractions just below 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C

At 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C , the tie-line extends from C α = 0.022 % C C_{\alpha} = 0.022\%\text{ C} C α ​ = 0.022% C to C Fe 3 C = 6.67 % C C_{\text{Fe}_3\text{C}} = 6.67\%\text{ C} C Fe 3 ​ C ​ = 6.67% C with overall composition C 0 = 0.45 % C C_0 = 0.45\%\text{ C} C 0 ​ = 0.45% C : W α , total = 6.67 − 0.45 6.67 − 0.022 = 6.22 6.648 = 0.9356 ⟹ 93.56 % W_{\alpha, \text{total}} = \frac{6.67 - 0.45}{6.67 - 0.022} = \frac{6.22}{6.648} = 0.9356 \implies 93.56\% W α , total ​ = 6.67 − 0.022 6.67 − 0.45 ​ = 6.648 6.22 ​ = 0.9356 ⟹ 93.56% W Fe 3 C , total = 0.45 − 0.022 6.67 − 0.022 = 0.428 6.648 = 0.0644 ⟹ 6.44 % W_{\text{Fe}_3\text{C}, \text{total}} = \frac{0.45 - 0.022}{6.67 - 0.022} = \frac{0.428}{6.648} = 0.0644 \implies 6.44\% W Fe 3 ​ C , total ​ = 6.67 − 0.022 0.45 − 0.022 ​ = 6.648 0.428 ​ = 0.0644 ⟹ 6.44%

Step 2: Proeutectoid ferrite vs. Pearlite fraction just above 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C

Just above 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C , the tie-line spans between proeutectoid ferrite ( C α = 0.022 % C C_{\alpha} = 0.022\%\text{ C} C α ​ = 0.022% C ) and remaining austenite ( C γ = 0.77 % C C_{\gamma} = 0.77\%\text{ C} C γ ​ = 0.77% C ): W α , pro = 0.77 − 0.45 0.77 − 0.022 = 0.32 0.748 = 0.4278 ⟹ 42.78 % W_{\alpha, \text{pro}} = \frac{0.77 - 0.45}{0.77 - 0.022} = \frac{0.32}{0.748} = 0.4278 \implies 42.78\% W α , pro ​ = 0.77 − 0.022 0.77 − 0.45 ​ = 0.748 0.32 ​ = 0.4278 ⟹ 42.78% W γ = 0.45 − 0.022 0.77 − 0.022 = 0.428 0.748 = 0.5722 ⟹ 57.22 % W_{\gamma} = \frac{0.45 - 0.022}{0.77 - 0.022} = \frac{0.428}{0.748} = 0.5722 \implies 57.22\% W γ ​ = 0.77 − 0.022 0.45 − 0.022 ​ = 0.748 0.428 ​ = 0.5722 ⟹ 57.22%

Upon crossing 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C , the 57.22 % 57.22\% 57.22% remaining austenite undergoes the invariant eutectoid transformation into 100% Pearlite . Therefore:

  • Proeutectoid Ferrite: 42.78 % 42.78\% 42.78%
  • Eutectoid Pearlite: 57.22 % 57.22\% 57.22%

(Note: Inside the pearlite constituent, eutectoid ferrite contributes 0.5722 × 6.67 − 0.77 6.67 − 0.022 = 50.78 % 0.5722 \times \frac{6.67 - 0.77}{6.67 - 0.022} = 50.78\% 0.5722 × 6.67 − 0.022 6.67 − 0.77 ​ = 50.78% , which when added to 42.78 % 42.78\% 42.78% proeutectoid ferrite matches the total 93.56 % 93.56\% 93.56% ferrite exactly).

5. Microconstituents & Phase Morphology

Ferrite ( α \alpha α -iron): BCC interstitial solid solution of carbon in iron. Soft, ductile, highly magnetic, tensile strength ≈ 300 MPa \approx 300\text{ MPa} ≈ 300 MPa , hardness ≈ 80 HB \approx 80\text{ HB} ≈ 80 HB .

Austenite ( γ \gamma γ -iron): FCC solid solution. Ductile, malleable, non-magnetic, high work-hardening capacity; unstable below 727 ∘ C 727^{\circ}\text{C} 72 7 ∘ C under slow cooling.

Cementite ( Fe 3 C \text{Fe}_3\text{C} Fe 3 ​ C ): Intermetallic iron carbide containing 6.67 wt% C 6.67\text{ wt\% C} 6.67 wt% C . Orthorhombic crystal structure, extremely hard ( > 800 HV >800\text{ HV} > 800 HV or 65 HRC 65\text{ HRC} 65 HRC ) and brittle, negligible tensile ductility.

Pearlite: Lamellar aggregate of alternating thin plates of α \alpha α -ferrite ( 88 wt% 88\text{ wt\%} 88 wt% ) and Fe 3 C \text{Fe}_3\text{C} Fe 3 ​ C ( 12 wt% 12\text{ wt\%} 12 wt% ). Formed by cooperative sideways diffusion during the eutectoid transformation. Yield strength ≈ 400 – 600 MPa \approx 400\text{--}600\text{ MPa} ≈ 400 – 600 MPa .

Bainite: Non-lamellar microconstituent formed by isothermal transformation below the pearlite range ( 250 – 550 ∘ C 250\text{--}550^{\circ}\text{C} 250 – 55 0 ∘ C ). Consists of a fine dispersion of cementite needles/platelets embedded in a ferrite matrix (Upper Bainite: feathery at 350 – 550 ∘ C 350\text{--}550^{\circ}\text{C} 350 – 55 0 ∘ C ; Lower Bainite: acicular, high-toughness plate structure at 250 – 350 ∘ C 250\text{--}350^{\circ}\text{C} 250 – 35 0 ∘ C ).

Martensite: Diffusionless, athermal shear transformation product formed when austenite is quenched rapidly below the Martensite Start ( M s M_s M s ​ ) temperature. Possesses a Body-Centered Tetragonal (BCT) crystal structure supersaturated with trapped carbon atoms. Features extreme hardness ( 60 – 68 HRC 60\text{--}68\text{ HRC} 60 – 68 HRC ), high yield strength, and severe brittleness in the as-quenched state.