Study guide
14.12 Economics of Machining & Tool Life Optimisation
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
14.12 Economics of Machining & Tool Life Optimisation
Key Takeaways Explain This Topic AI
Economics of machining is named explicitly in the Machining bullet of the CIL Mechanical Paper-II syllabus.
Total cost per component is the sum of machining cost, tool changing cost, tool cost and non-productive cost, and only the first three depend on cutting speed.
Increasing cutting speed reduces machining time but shortens tool life, so an optimum exists for both minimum cost and maximum production rate.
The cutting speed for maximum production rate is always higher than the speed for minimum cost, and the range between them is called the high-efficiency machining range.
Last updated: August 2026
The Trade-Off
Raising cutting speed cuts the machining time for each component, which sounds like an unambiguous good. But Taylor's tool life equation V T n = C V\,T^{n} = C V T n = C
shows that tool life falls steeply as speed rises, so tools must be changed more often. Each change costs machine downtime and a fresh cutting edge.
Machining economics finds the speed that balances these opposing effects. Note the exponent: since n n n is typically 0.1 to 0.25 for high speed steel and 0.2 to 0.5 for carbide, tool life is extremely sensitive to speed. With n = 0.2 n = 0.2 n = 0.2 , a 20% increase in cutting speed cuts tool life by roughly two thirds .
Building the Cost Model
Let:
- Symbol Meaning
- C m C_m C m Machine and operator cost per minute
- t m t_m t m Machining time per component (minutes)
- t c t_c t c Tool changing time (minutes)
- t l t_l t l Loading, unloading and idle time per component
- C t C_t C t Cost of one cutting edge
- T T T Tool life in minutes
The number of tool changes per component is t m / T t_m/T t m / T , since a tool lasting T T T minutes covers T / t m T/t_m T / t m components. Cost per component = C m t l ⏟ non-productive + C m t m ⏟ machining + C m t c t m T ⏟ tool changing + C t t m T ⏟ tool cost \text{Cost per component} = \underbrace{C_m t_l}_{\text{non-productive}} + \underbrace{C_m t_m}_{\text{machining}} + \underbrace{C_m t_c \frac{t_m}{T}}_{\text{tool changing}} + \underbrace{C_t \frac{t_m}{T}}_{\text{tool cost}} Cost per component = non-productive C m t l + machining C m t m + tool changing C m t c T t m + tool cost C t T t m
The non-productive term is independent of cutting speed , so it does not affect the optimum — an important point, because it means the optimum speed is unchanged by improvements in loading and unloading, even though the total cost falls.
Expressing Everything in Terms of Speed
For turning a bar of diameter D D D and length L L L at feed f f f and speed V V V : t m = π D L 1000 f V t_m = \frac{\pi D L}{1000\,f\,V} t m = 1000 f V π D L
so machining time is inversely proportional to V V V . Writing t m = k / V t_m = k/V t m = k / V and, from Taylor, T = ( C / V ) 1 / n T = (C/V)^{1/n} T = ( C / V ) 1/ n : t m T = k V ⋅ V 1 / n C 1 / n = k V ( 1 / n ) − 1 C 1 / n \frac{t_m}{T} = \frac{k}{V}\cdot\frac{V^{1/n}}{C^{1/n}} = \frac{k\,V^{(1/n)-1}}{C^{1/n}} T t m = V k ⋅ C 1/ n V 1/ n = C 1/ n k V ( 1/ n ) − 1
Substituting into the cost equation and differentiating with respect to V V V gives the classical results.
Optimum Tool Life for Minimum Cost T opt,cost = ( 1 n − 1 ) ( t c + C t C m ) \boxed{T_{\text{opt,cost}} = \left(\frac{1}{n} - 1\right)\left(t_c + \frac{C_t}{C_m}\right)} T opt,cost = ( n 1 − 1 ) ( t c + C m C t )
and the corresponding economic cutting speed follows from Taylor's equation: V opt = C T opt n V_{\text{opt}} = \frac{C}{T_{\text{opt}}^{\,n}} V opt = T opt n C
Notice what this result contains and what it does not. It depends on the tool change time , the ratio of tool cost to machine rate , and the Taylor exponent . It does not depend on the length of the cut, the diameter, or the non-productive time.
The grouped term ( t c + C t / C m ) \left(t_c + C_t/C_m\right) ( t c + C t / C m ) is the total cost of a tool change expressed in minutes of machine time. A cheap insert on an expensive machine gives a small value and therefore a short optimum tool life — run fast and change often. An expensive tool on a cheap machine reverses the conclusion.
Optimum Tool Life for Maximum Production
If the objective is minimum time per component rather than minimum cost, the tool cost term drops out entirely: T opt,production = ( 1 n − 1 ) t c \boxed{T_{\text{opt,production}} = \left(\frac{1}{n} - 1\right)t_c} T opt,production = ( n 1 − 1 ) t c
This is the tool life for maximum production rate , and the corresponding speed V max V_{\max} V m a x is higher than the economic speed.
The Relationship Between the Two Optima
Since C t / C m C_t/C_m C t / C m is always positive, T opt,cost > T opt,production ⟹ V opt,cost < V opt,production T_{\text{opt,cost}} > T_{\text{opt,production}} \quad\Longrightarrow\quad V_{\text{opt,cost}} < V_{\text{opt,production}} T opt,cost > T opt,production ⟹ V opt,cost < V opt,production
The speed for maximum production is always higher than the speed for minimum cost . This is intuitive once stated: pushing for output ignores what the tools cost, so it justifies running faster and wearing tools out sooner.
The band between these two speeds is called the high-efficiency machining range or the Gilbert range . Operating below V cost V_{\text{cost}} V cost is wasteful on both counts — it costs more and produces less, which is unambiguously wrong. Operating above V production V_{\text{production}} V production is likewise wrong on both counts. Any speed inside the band is a defensible choice depending on whether the shop is cost-constrained or capacity-constrained.
This gives a practical decision rule: when the order book is full and the machine is the bottleneck, work towards the production-rate end of the range; when work is scarce and machine time is not the constraint, work towards the minimum-cost end.
Worked Example
A turning operation uses a carbide insert with Taylor constants n = 0.25 n = 0.25 n = 0.25 and C = 150 C = 150 C = 150 . Tool changing takes 3 minutes, the insert edge costs 60 rupees and the machine plus operator rate is 12 rupees per minute.
Minimum cost tool life: T = ( 1 0.25 − 1 ) ( 3 + 60 12 ) = 3 × ( 3 + 5 ) = 3 × 8 = 24 minutes T = \left(\frac{1}{0.25}-1\right)\left(3 + \frac{60}{12}\right) = 3\times(3+5) = 3\times8 = 24 \text{ minutes} T = ( 0.25 1 − 1 ) ( 3 + 12 60 ) = 3 × ( 3 + 5 ) = 3 × 8 = 24 minutes
Economic cutting speed: V = 150 24 0.25 = 150 2.213 = 67.8 m/min V = \frac{150}{24^{0.25}} = \frac{150}{2.213} = 67.8 \text{ m/min} V = 2 4 0.25 150 = 2.213 150 = 67.8 m/min
Maximum production tool life: T = 3 × 3 = 9 minutes T = 3\times3 = 9 \text{ minutes} T = 3 × 3 = 9 minutes
Maximum production speed: V = 150 9 0.25 = 150 1.732 = 86.6 m/min V = \frac{150}{9^{0.25}} = \frac{150}{1.732} = 86.6 \text{ m/min} V = 9 0.25 150 = 1.732 150 = 86.6 m/min
So the high-efficiency range runs from 67.8 to 86.6 m/min . Running at 50 m/min or at 100 m/min would both be indefensible.
Effect of Feed and Depth of Cut
Taylor's equation in its extended form recognises that feed and depth also affect tool life: V T n f a d b = C ′ V\,T^{n}\,f^{a}\,d^{b} = C' V T n f a d b = C ′
with exponents satisfying n < a < b n < a < b n < a < b in the usual ordering of influence. Because cutting speed affects tool life far more strongly than feed, which in turn affects it more than depth of cut , the standard rule for maximising removal rate follows:
Take the greatest depth of cut the machine and setup allow, then the greatest feed the surface finish and tool strength allow, and only then optimise the cutting speed.
This ordering is one of the most useful practical results in production engineering and is a common examination point.
Constraints on the Optimum
The calculated optimum is frequently unattainable, and a competent answer recognises the constraints:
- Constraint Effect
- Machine power P = F c V P = F_c V P = F c V ; the optimum speed may exceed available power
- Surface finish Theoretical roughness R t = f 2 / 8 r R_t = f^2/8r R t = f 2 /8 r limits feed
- Machine rigidity Chatter sets in above a stability limit
- Tool strength Depth and feed limited by insert geometry
- Workpiece rigidity Slender shafts deflect; light cuts required
- Dimensional accuracy Heat and deflection grow with removal rate
When a constraint binds, the operating point moves to the constraint boundary rather than to the unconstrained optimum.
Interpretation for a Maintenance Workshop
In a coal subsidiary's central workshop, the parameters differ sharply from a mass-production shop. Batch sizes are small, setup and non-productive time dominates the cycle, and a machine standing idle is common. The cost model responds accordingly: the non-productive term is large but does not shift the optimum speed, while the ratio C t / C m C_t/C_m C t / C m tends to be high because tooling is bought in small quantities at retail prices and machine rates are low. That pushes the economic tool life up and the economic cutting speed down — conservative speeds with long tool life are genuinely correct in that setting, not merely traditional.