Study guide
14.2 Heat Treatment Processes & Engineering Alloy Steels
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
14.2 Heat Treatment Processes & Engineering Alloy Steels
Key Takeaways Explain This Topic AI
TTT diagrams map isothermal transformation kinetics under non-equilibrium cooling, whereas CCT diagrams describe continuous cooling paths with transformation curves shifted to longer times and lower temperatures.
The Critical Cooling Rate (CCR) defines the minimum quenching rate required to bypass the pearlite/bainite nose and transform austenite entirely into hard, brittle BCT martensite.
Isothermal heat treatments—Austempering (producing tough 100% Bainite) and Martempering (equalizing temperature before martensite transformation)—eliminate quench cracking and distortion.
Alloying elements modify phase equilibria: Ni enhances low-temperature notch toughness, Cr provides corrosion passivity and hardenability, Mo/W confer red hardness and resist temper embrittlement, and V ensures grain refinement.
Last updated: August 2026
13.2 Heat Treatment Processes & Engineering Alloy Steels
Heat treatment encompasses controlled thermal cycles of heating, soaking, and cooling designed to deliberately modify the microstructure, mechanical properties, and residual stress states of engineering alloys without altering component geometry. In heavy machinery, haul trucks, coal washeries, and draglines operated by Coal India Limited, components like gears, drive shafts, crushing rolls, and bucket teeth rely on tailored heat treatment to withstand extreme abrasive wear, shock loading, and cyclic fatigue.
1. Non-Equilibrium Transformation Kinetics: TTT & CCT Diagrams
While the Iron-Carbon equilibrium diagram dictates phase mixtures under infinitely slow heating and cooling rates, industrial heat treatments involve non-equilibrium kinetic cooling. Temperature (°C)
- 800°C +---------------------------------------------------+
- 727°C | A1 Equilibrium Temperature |
- |---------------------------------------------------|
- 600°C | \ Pearlite Nose |
- | Austenite\ (Coarse Pearlite) |
- 500°C | (Stable) \ |
- | ) (Fine Pearlite) |
- 400°C | / |
- | / Upper Bainite (Feathery) |
- 300°C | / |
- | / Lower Bainite (Acicular) |
- 200°C +--------+------------------------------------------+ <--- Ms (Martensite Start)
- | | Martensite Transformation |
- 100°C +--------+------------------------------------------+ <--- Mf (Martensite Finish)
- +--------+-------+--------+--------+--------+-------+
- 10^-1 1 10 10^2 10^3 10^4 10^5 Time (seconds, log scale)
- Time-Temperature-Transformation (TTT) Diagrams
Also designated Bain's curves , S-curves , or Isothermal Transformation (IT) diagrams, TTT charts plot the percentage decomposition of unstable supercooled austenite held at constant subcritical temperatures versus logarithmic time:
Pearlite Region ( 550 ∘ C → 727 ∘ C 550^{\circ}\text{C} \to 727^{\circ}\text{C} 55 0 ∘ C → 72 7 ∘ C ): Austenite decomposes via cooperative diffusion into lamellar ferrite and cementite. Near 700 ∘ C 700^{\circ}\text{C} 70 0 ∘ C , low undercooling produces coarse pearlite (interlamellar spacing ∼ 0.5 – 1.0 μ m \sim 0.5\text{--}1.0\;\mu\text{m} ∼ 0.5 – 1.0 μ m , softer). Near 550 ∘ C 550^{\circ}\text{C} 55 0 ∘ C , high undercooling produces fine pearlite (spacing ∼ 0.1 μ m \sim 0.1\;\mu\text{m} ∼ 0.1 μ m , harder, higher yield strength).
Bainite Region ( 250 ∘ C → 550 ∘ C 250^{\circ}\text{C} \to 550^{\circ}\text{C} 25 0 ∘ C → 55 0 ∘ C ): Austenite transforms isothermally into non-lamellar bainite. Upper Bainite ( 350 – 550 ∘ C 350\text{--}550^{\circ}\text{C} 350 – 55 0 ∘ C ) consists of feathery cementite precipitated between ferrite needles. Lower Bainite ( 250 – 350 ∘ C 250\text{--}350^{\circ}\text{C} 250 – 35 0 ∘ C ) features ultra-fine carbide platelets aligned internally at 55 ∘ – 60 ∘ 55^{\circ}\text{--}60^{\circ} 5 5 ∘ – 6 0 ∘ angles within ferrite plates, displaying superior impact toughness.
Martensite Start ( M s M_s M s ) & Finish ( M f M_f M f ) Temperatures: Below M s M_s M s (typically 200 – 220 ∘ C 200\text{--}220^{\circ}\text{C} 200 – 22 0 ∘ C for 0.8 % C 0.8\%\text{ C} 0.8% C steel), the transformation occurs athermally via diffusionless shear. The fraction of martensite formed depends solely on the temperature to which the steel is cooled, independent of holding time: M s ( ∘ C ) = 539 − 423 ( % C ) − 30.4 ( % Mn ) − 17.7 ( % Ni ) − 12.1 ( % Cr ) − 7.5 ( % Mo ) M_s (^{\circ}\text{C}) = 539 - 423(\%\text{C}) - 30.4(\%\text{Mn}) - 17.7(\%\text{Ni}) - 12.1(\%\text{Cr}) - 7.5(\%\text{Mo}) M s ( ∘ C ) = 539 − 423 ( % C ) − 30.4 ( % Mn ) − 17.7 ( % Ni ) − 12.1 ( % Cr ) − 7.5 ( % Mo )
Continuous Cooling Transformation (CCT) Diagrams & Critical Cooling Rate (CCR)
In continuous industrial quenching, the steel cools dynamically across a spectrum of temperatures rather than being held isothermally. Consequently, in a CCT diagram:
Transformation start and finish curves are shifted to longer times (to the right) and lower temperatures (downward) relative to TTT curves.
Bainite formation is often completely bypassed in plain carbon steels during continuous cooling. Critical Cooling Rate (CCR) = T austenitizing − T nose t nose \text{Critical Cooling Rate (CCR)} = \frac{T_{\text{austenitizing}} - T_{\text{nose}}}{t_{\text{nose}}} Critical Cooling Rate (CCR) = t nose T austenitizing − T nose
The Critical Cooling Rate (CCR) is the minimum cooling velocity required to just suppress the pearlite and bainite transformation "noses", achieving a 100 % 100\% 100% martensitic microstructure upon reaching M f M_f M f .
2. Bulk Industrial Heat Treatment Processes
Heat Treatment Process Heating Temperature Range Cooling Medium Resulting Microstructure Primary Engineering Purpose
Full Annealing Hypo: A 3 + 30 – 50 ∘ C A_3 + 30\text{--}50^{\circ}\text{C} A 3 + 30 – 5 0 ∘ C ; Hyper: A 1 + 30 – 50 ∘ C A_1 + 30\text{--}50^{\circ}\text{C} A 1 + 30 – 5 0 ∘ C Slow furnace cool ( 10 – 30 ∘ C/hr 10\text{--}30^{\circ}\text{C/hr} 10 – 3 0 ∘ C/hr ) Coarse pearlite + proeutectoid ferrite Maximum ductility, minimum hardness, internal stress relief, improved machinability
Normalizing Hypo: A 3 + 30 – 50 ∘ C A_3 + 30\text{--}50^{\circ}\text{C} A 3 + 30 – 5 0 ∘ C ; Hyper: A cm + 30 – 50 ∘ C A_{\text{cm}} + 30\text{--}50^{\circ}\text{C} A cm + 30 – 5 0 ∘ C Still air cooling Fine pearlite + refined proeutectoid phase Grain refinement, uniform grain size, higher yield strength and hardness than annealing
Process Annealing Subcritical ( 550 – 650 ∘ C 550\text{--}650^{\circ}\text{C} 550 – 65 0 ∘ C ) Air or furnace Recrystallized ferrite grains Relieves strain-hardening in cold-worked low-carbon steels without phase transformation
Spheroidizing Prolonged soak at A 1 ± 20 ∘ C A_1 \pm 20^{\circ}\text{C} A 1 ± 2 0 ∘ C ( 680 – 710 ∘ C 680\text{--}710^{\circ}\text{C} 680 – 71 0 ∘ C ) Very slow furnace cool Globular Fe 3 C \text{Fe}_3\text{C} Fe 3 C spheroids in ferrite matrix Maximum machinability and formability in high-carbon tool steels ( > 0.6 % C >0.6\%\text{ C} > 0.6% C )
Quench Hardening Hypo: A 3 + 30 – 50 ∘ C A_3 + 30\text{--}50^{\circ}\text{C} A 3 + 30 – 5 0 ∘ C ; Hyper: A 1 + 30 – 50 ∘ C A_1 + 30\text{--}50^{\circ}\text{C} A 1 + 30 – 5 0 ∘ C Rapid quench (Water, Oil, Brine) > > > CCR As-quenched BCT Martensite (+ retained austenite) Maximum hardness, wear resistance, and shear strength (accompanied by brittleness)
Key Exam Rule for Hypereutectoid Steels: In both Full Annealing and Hardening, hypereutectoid steels are heated only above A 1 A_1 A 1 (not A cm A_{\text{cm}} A cm ). Heating above A cm A_{\text{cm}} A cm would dissolve all cementite; upon subsequent slow cooling, proeutectoid cementite would re-precipitate as a brittle, continuous network along austenite grain boundaries, destroying ductility.
- 3. Tempering & Specialized Isothermal Treatments
- Multi-Stage Tempering of As-Quenched Steels
As-quenched martensite contains severe residual macro-stresses and high tetragonality, rendering it excessively brittle for load-bearing service. Tempering involves reheating quenched steel to a subcritical temperature ( 150 – 650 ∘ C 150\text{--}650^{\circ}\text{C} 150 – 65 0 ∘ C ), holding, and cooling to transform BCT martensite into tough tempered martensite (stable BCC ferrite containing fine dispersed spheroidal Fe 3 C \text{Fe}_3\text{C} Fe 3 C particles). As-Quenched BCT Martensite (Hard, Brittle)
- │
- ├─ Stage 1 (100–200°C) ──> Loss of tetragonality; ε-carbide (Fe2.4C) precipitates; volume contracts
- ├─ Stage 2 (200–300°C) ──> Unstable retained austenite decomposes into Lower Bainite
- ├─ Stage 3 (300–400°C) ──> ε-carbide transforms to stable cementite (Fe3C) + BCC α-ferrite
- └─ Stage 4 (400–700°C) ──> Spheroidization and coarsening of Fe3C particles (Tempered Martensite)
- Temper Embrittlement Phenomena
Blue Brittleness ( 230 – 370 ∘ C 230\text{--}370^{\circ}\text{C} 230 – 37 0 ∘ C ): Dynamic strain aging due to interstitial carbon/nitrogen interaction with moving dislocations during tempering.
Reversible Temper Brittleness ( 375 – 575 ∘ C 375\text{--}575^{\circ}\text{C} 375 – 57 5 ∘ C ): Embrittlement observed in Ni-Cr and Mn alloy steels when slowly cooled through 450 – 550 ∘ C 450\text{--}550^{\circ}\text{C} 450 – 55 0 ∘ C , caused by segregation of impurity tramp elements (P, Sb, Sn, As) to prior austenite grain boundaries. It is prevented by adding 0.2 – 0.5 wt% Molybdenum (Mo) 0.2\text{--}0.5\text{ wt\% Molybdenum (Mo)} 0.2 – 0.5 wt% Molybdenum (Mo) or rapid quenching from 600 ∘ C 600^{\circ}\text{C} 60 0 ∘ C .
- Specialized Isothermal Operations: Austempering vs. Martempering Temperature (°C)
- Austenitizing Temp +---------------+ +---------------+
- | | | |
- | AUSTEMPERING | | MARTEMPERING |
- 727°C (A1) --------+---------------+ +---------------+---------
- | \ | | \ |
- | \ Pearlite | | \ Pearlite |
- | \ Nose | | \ Nose |
- | ) | | ) |
- Isothermal Hold ───+────(──────────+── | ( |
- (250-400°C) | \ Bainite | \ | \ Bainite |
- | \ | \ Air | \ |
- Ms ----------------+-------+-------+----+--- +-------+-------+---------
- | | | | Equalize Temp | \ Air Cool
- Mf ----------------+-------+------------+--- +---------------+--\------
- | Microstructure: | | Microstructure: \ (Forms
- | 100% Tough Bainite | | Martensite -> Temp) Martensite)
Austempering:
Steel is austenitized, quenched into a molten salt bath maintained between 250 ∘ C 250^{\circ}\text{C} 25 0 ∘ C and 400 ∘ C 400^{\circ}\text{C} 40 0 ∘ C (above M s M_s M s ), and held isothermally until complete bainitic transformation is achieved, followed by air cooling.
Product: 100 % 100\% 100% Lower Bainite. High impact toughness ( > 60 J >60\text{ J} > 60 J Charpy), high fatigue limit, zero quench distortion, no subsequent tempering needed.
Martempering (Marquenching):
Steel is quenched into a hot oil/salt bath just above M s M_s M s ( 200 – 250 ∘ C 200\text{--}250^{\circ}\text{C} 200 – 25 0 ∘ C ), held only until temperature equalizes across the entire cross-section (without crossing the bainite start curve), and then slowly cooled through the M s – M f M_s\text{--}M_f M s – M f range.
Product: Uniform BCT Martensite. Eliminates thermal gradient stresses and prevents quench cracking. Must be followed by conventional tempering.
4. Thermochemical & Surface Hardening Techniques
Many mechanical components (e.g., mine haul truck transmission gears, pins, and track rollers) require a hard, wear-resistant outer case combined with a ductile, shock-absorbing core .
Surface Hardening Method Mechanism / Media Process Temperature Case Depth Resulting Surface Hardness Distortion & Quench Need
Pack Carburizing Solid charcoal + BaCO 3 \text{BaCO}_3 BaCO 3 activator ( 2 CO → C + CO 2 2\text{CO} \to \text{C} + \text{CO}_2 2 CO → C + CO 2 ) 900 – 950 ∘ C 900\text{--}950^{\circ}\text{C} 900 – 95 0 ∘ C 0.8 – 2.0 mm 0.8\text{--}2.0\text{ mm} 0.8 – 2.0 mm 58 – 62 HRC 58\text{--}62\text{ HRC} 58 – 62 HRC High distortion; requires reheating and oil/water quenching
Gas Carburizing Hydrocarbon gas ( CH 4 \text{CH}_4 CH 4 , C 3 H 8 \text{C}_3\text{H}_8 C 3 H 8 , endothermic gas) 900 – 930 ∘ C 900\text{--}930^{\circ}\text{C} 900 – 93 0 ∘ C 0.5 – 1.5 mm 0.5\text{--}1.5\text{ mm} 0.5 – 1.5 mm 60 – 64 HRC 60\text{--}64\text{ HRC} 60 – 64 HRC Moderate distortion; direct quenching feasible
Gas Nitriding Anhydrous Ammonia ( 2 NH 3 → 2 [ N ] + 3 H 2 2\text{NH}_3 \to 2[\text{N}] + 3\text{H}_2 2 NH 3 → 2 [ N ] + 3 H 2 ) on alloy steels (Al, Cr, Mo, V) 500 – 550 ∘ C 500\text{--}550^{\circ}\text{C} 500 – 55 0 ∘ C (Subcritical) 0.1 – 0.5 mm 0.1\text{--}0.5\text{ mm} 0.1 – 0.5 mm 1000 – 1150 HV 1000\text{--}1150\text{ HV} 1000 – 1150 HV ( > 68 HRC >68\text{ HRC} > 68 HRC ) Zero quench required ; negligible distortion; exceptional hot hardness up to 500 ∘ C 500^{\circ}\text{C} 50 0 ∘ C
Cyaniding (Liquid) Molten bath ( 30 % NaCN + 40 % Na 2 CO 3 + 30 % NaCl 30\%\;\text{NaCN} + 40\%\;\text{Na}_2\text{CO}_3 + 30\%\;\text{NaCl} 30% NaCN + 40% Na 2 CO 3 + 30% NaCl ) 800 – 870 ∘ C 800\text{--}870^{\circ}\text{C} 800 – 87 0 ∘ C 0.1 – 0.25 mm 0.1\text{--}0.25\text{ mm} 0.1 – 0.25 mm 60 – 65 HRC 60\text{--}65\text{ HRC} 60 – 65 HRC Rapid process for small parts; highly toxic cyanide salts
Flame Hardening Oxy-acetylene torch heating of medium-carbon steel ( 0.4 – 0.6 % C 0.4\text{--}0.6\%\text{ C} 0.4 – 0.6% C ) + water spray Austenitizing ( 850 ∘ C 850^{\circ}\text{C} 85 0 ∘ C ) 2.0 – 6.0 mm 2.0\text{--}6.0\text{ mm} 2.0 – 6.0 mm 50 – 58 HRC 50\text{--}58\text{ HRC} 50 – 58 HRC Localized hardening for large mill gears, crane wheels, lathe bedways
Induction Hardening High-frequency eddy currents (Skin effect depth δ = ρ π f μ \delta = \sqrt{\frac{\rho}{\pi f \mu}} δ = π f μ ρ ) + water spray Austenitizing ( 850 – 900 ∘ C 850\text{--}900^{\circ}\text{C} 850 – 90 0 ∘ C ) 0.5 – 4.0 mm 0.5\text{--}4.0\text{ mm} 0.5 – 4.0 mm 55 – 62 HRC 55\text{--}62\text{ HRC} 55 – 62 HRC Precise depth control, automated high-volume production (camshafts, crankshafts)
5. Metallurgical Roles of Alloying Elements in Steels
Alloying elements shift phase boundaries ( A 1 , A 3 , A cm A_1, A_3, A_{\text{cm}} A 1 , A 3 , A cm ), retard diffusion kinetics, and alter the mechanical response of engineering steels:
Chromium ( Cr \text{Cr} Cr ): Strong carbide former. Shifts the TTT nose to the right, dramatically increasing hardenability. At concentrations > 12 wt% >12\text{ wt\%} > 12 wt% , it forms a dense, self-healing passive chromia ( Cr 2 O 3 \text{Cr}_2\text{O}_3 Cr 2 O 3 ) film , producing stainless steels .
Nickel ( Ni \text{Ni} Ni ): Powerful Austenite Stabilizer (FCC). Lowers the ductile-to-brittle transition temperature (DBTT), markedly enhancing low-temperature notch toughness and impact resistance (e.g., 9 % Ni 9\%\;\text{Ni} 9% Ni cryogenic steels).
Molybdenum ( Mo \text{Mo} Mo ) & Tungsten ( W \text{W} W ): Strong carbide formers ( Mo 2 C , W 2 C \text{Mo}_2\text{C}, \text{W}_2\text{C} Mo 2 C , W 2 C ). Inhibit grain boundary sliding, elevate creep rupture strength, eliminate temper embrittlement, and confer red hardness (hot hardness up to 600 ∘ C 600^{\circ}\text{C} 60 0 ∘ C ) in High-Speed Steels ( 18-4-1 HSS: 18 % W , 4 % Cr , 1 % V , 0.7 % C 18\%\;\text{W}, 4\%\;\text{Cr}, 1\%\;\text{V}, 0.7\%\;\text{C} 18% W , 4% Cr , 1% V , 0.7% C ).
Manganese ( Mn \text{Mn} Mn ): Essential deoxidizer and sulfur scavenger. Combines with sulfur to form benign spheroidal MnS \text{MnS} MnS inclusions , preventing the formation of low-melting-point FeS \text{FeS} FeS grain boundary films that cause hot shortness during forging/rolling. Increases hardenability.
Vanadium ( V \text{V} V ): Forms extremely stable, ultra-fine VC \text{VC} VC precipitates that pin austenite grain boundaries during high-temperature austenitizing, ensuring a fine equiaxed grain size ( grain refinement ) and high yield strength.