Study guide
14.7 Powder Metallurgy
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
14.7 Powder Metallurgy
Key Takeaways Explain This Topic AI
Principles of powder metallurgy are named explicitly in the Casting, Forming and Joining bullet of the CIL Mechanical Paper-II syllabus.
The basic sequence is powder production, blending, compaction and sintering, with optional secondary operations such as sizing, impregnation and infiltration.
Sintering is carried out below the melting point of the principal constituent, typically at 70 to 80 percent of the absolute melting temperature, so bonding occurs by diffusion rather than melting.
Powder metallurgy is the only practical route for tungsten carbide cutting tools, self-lubricating porous bearings and refractory metals such as tungsten and molybdenum.
Last updated: August 2026
What Powder Metallurgy Is For
Powder metallurgy shapes components from metal powders without ever fully melting them. It exists because it can do four things no other process can:
Produce refractory metals such as tungsten, molybdenum and tantalum, whose melting points are too high for practical casting.
Combine materials that are mutually insoluble or have widely different melting points — tungsten carbide in a cobalt binder, copper-graphite brushes.
Produce controlled porosity , which is a defect in any other process but is the entire point of a self-lubricating bearing or a filter.
Make large numbers of small, complex parts to close tolerance with almost no material waste — utilisation typically exceeds 95%, against 50 to 60% for machining from bar.
Powder Production
Method Principle Characteristic powder
Atomisation Molten metal stream broken up by a jet of water, gas or by a spinning disc Most common; shape depends on the medium — water gives irregular, gas gives spherical
Reduction Metal oxide reduced by hydrogen or carbon Spongy, porous particles; common for iron
Electrolytic deposition Metal deposited as a brittle layer, then crushed Very high purity; dendritic; used for copper
- Mechanical comminution Crushing, milling, ball milling Suits brittle metals and ceramics
- Carbonyl process Thermal decomposition of metal carbonyls Very fine, spherical, high purity; iron and nickel
- Powder Characterisation
Powder behaviour is governed by properties that must be controlled:
- Property Significance
- Particle size and distribution A mix of sizes packs better; fines fill the gaps between coarse particles
- Particle shape Irregular shapes interlock and give better green strength ; spherical powders flow better
- Apparent density Loose bulk density, determining the die fill volume needed
- Flow rate Ability to fill the die quickly and uniformly, critical for production rate
- Compressibility Density achievable at a given compaction pressure
- Purity Surface oxide impedes bonding during sintering
The key trade-off: spherical particles flow well but bond poorly; irregular particles bond well but flow poorly. Commercial powders are engineered to balance the two.
Blending and Mixing
Powders are blended with:
Alloying additions , so that a homogeneous alloy forms by diffusion during sintering.
Lubricants such as zinc stearate, typically 0.5 to 1.5%, to reduce die wall friction and ease ejection. The lubricant is burned off in the early stage of sintering.
Binders , where green strength must be higher than compaction alone provides.
Compaction
Powder is pressed in a rigid die at 100 to 900 MPa depending on the material. The result is a green compact — strong enough to handle but not yet a solid metal.
The central difficulty is density variation . Friction between the powder and the die wall means pressure is not transmitted uniformly, so density falls with distance from the punch face. Remedies:
Double-action pressing , with punches moving from both ends, halves the maximum distance from a punch face.
Lubricants reduce wall friction.
Limiting the length-to-diameter ratio , generally to less than about 3 to 1.
Alternative consolidation routes
Method Description
Isostatic pressing (CIP) Pressure applied hydraulically from all directions via a flexible mould; uniform density, complex shapes
Hot isostatic pressing (HIP) Pressure and temperature together; near-full density; used for turbine discs and to heal casting porosity
- Powder rolling Powder fed between rolls to produce continuous strip
- Powder extrusion Canned powder extruded; good for refractory metals
Injection moulding (MIM) Powder mixed with polymer binder, injection moulded, debound, sintered; very complex small parts
Sintering
Sintering is the heart of the process. The green compact is heated in a controlled atmosphere to a temperature typically 70 to 80% of the absolute melting temperature of the principal constituent — below the melting point, so no general melting occurs.
Mechanism
Bonding occurs by solid-state diffusion . Atoms migrate across the points of contact between particles, driven by the reduction of surface free energy. Three stages are conventionally distinguished:
Neck formation at the contact points between adjacent particles.
Neck growth and pore rounding , with densification and shrinkage.
Pore closure and grain growth , as isolated pores shrink and disappear.
Consequences
The compact shrinks , typically by a few percent, so the die must be oversized by the anticipated shrinkage. Predicting shrinkage accurately is what makes close tolerances achievable.
Strength, ductility, electrical conductivity and thermal conductivity all rise substantially.
Residual porosity remains unless full density is forced by HIP or by a secondary operation.
Atmospheres
- Atmosphere Purpose
- Hydrogen Strongly reducing; removes surface oxide
- Dissociated ammonia Reducing, cheaper than pure hydrogen
- Endothermic gas General ferrous sintering
- Nitrogen Inert, economical
- Vacuum Refractory metals, stainless steel, cemented carbides
Air is never used, because oxidation would prevent metallic bonding entirely.
Liquid phase sintering
Where one constituent melts and the other does not, the liquid wets the solid particles and draws them together by capillary action, giving rapid densification. This is how cemented carbide is made: tungsten carbide particles held in a cobalt binder that melts and flows around them. The result — extreme hardness from the carbide, adequate toughness from the binder — cannot be made by any melting route, because the carbide would dissolve or decompose.
Secondary Operations
- Operation Purpose
- Sizing / coining Re-pressing to correct dimensions and improve density and finish
- Repressing and re-sintering Raises density substantially
- Impregnation Filling pores with oil to make a self-lubricating bearing, or with resin for sealing
Infiltration Filling pores with a lower-melting metal , such as copper into iron, giving near-full density and higher strength
- Machining For features that cannot be pressed, such as undercuts and cross holes
- Heat treatment As for wrought material, though porosity affects quench response
- Plating and steam treatment Corrosion protection; steam treatment forms a sealing oxide layer
- Applications
- Product Why powder metallurgy
- Cemented carbide tool tips The only way to combine WC hardness with Co toughness
- Self-lubricating bronze bearings Controlled porosity holds up to 30% oil by volume
- Metallic filters Uniform, controlled pore size
- Friction materials for clutches and brakes Metal matrix with dispersed non-metallic friction particles
- Tungsten filaments and electrical contacts Tungsten cannot practically be cast
- Small gears, cams, sprockets High volume, close tolerance, no machining waste
- Magnets and diamond tooling Composite structures impossible by melting
- Advantages and Limitations
Advantages. Very high material utilisation; close tolerances with little or no machining; controlled porosity; production of alloys and composites otherwise impossible; excellent reproducibility in high volume; unskilled operation once tooling exists.
Limitations. High tooling cost makes it uneconomic at low volumes ; part size is limited by available press capacity; the shape must be ejectable from a rigid die , so undercuts, re-entrant angles and cross holes are excluded; residual porosity reduces strength, ductility and fatigue life unless removed; and thin sections are difficult to fill uniformly.
The economic point deserves emphasis. Powder metallurgy is a mass production process. For a handful of parts it will always lose to machining; for hundreds of thousands, it usually wins decisively.